aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/benet/be_cmds.h
Commit message (Collapse)AuthorAge
* benet: remove dead codestephen hemminger2010-10-24
| | | | | | | | The following code and data are defined but never used in current driver. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: Changes to use only priority codes allowed by f/wSomnath Kotur2010-10-21
| | | | | | | | | | Changes to use one of the priority codes allowed by CNA f/w for NIC traffic from host. The driver gets the bit map of the priority codes allowed for host traffic through a asynchronous message from the f/w that the driver subscribes to. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: add multiple RX queue supportSathya Perla2010-10-04
| | | | | | | | | This patch adds multiple RX queue support to be2net. There are upto 4 extra rx-queues per port into which TCP/UDP traffic can be hashed into. Some of the ethtool stats are now displayed on a per queue basis. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: fix a bug in UE detection logicAjit Khaparde2010-09-03
| | | | | | | | | | | | | The ONLINE registers can return 0xFFFFFFFF on more than one occassion. On systems that care, reading these registers could lead to problems. So the new code decides that the ASIC has encountered and error by reading the UE_STATUS_LOW/HIGH registers. AND them with the mask values and a non-zero result indicates an error. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: add code to dump registers for debugAjit Khaparde2010-07-31
| | | | | | | | when the BE device becomes unresponsive, dump the registers to help debugging Signed-off-by: Somnath K <somnathk@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: variable name changesAjit Khaparde2010-07-23
| | | | | | | This patch changes names of some variables. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: code to support tx rate configuration on virtual functionsAjit Khaparde2010-07-23
| | | | | Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: changes to properly provide phy detailsAjit Khaparde2010-07-02
| | | | | | | | be2net driver is currently not showing correct phy details in certain cases. This patch fixes it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: Adding PCI SRIOV supportSarveshwar Bandi2010-04-01
| | | | | | | | - Patch adds support to enable PCI SRIOV in the driver and changes to handle initialization of PCI virtual functions. - Function handler to change mac addresses for VF from its corresponding PF. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: fix tx completion pollingSathya Perla2010-03-02
| | | | | | | | | | | In tx/mcc polling, napi_complete() is being incorrectly called before reaping tx completions. This can cause tx compl processing to be scheduled on another cpu concurrently which can result in a panic. This if fixed by calling napi complete() after tx/mcc compl processing but before re-enabling interrupts (via a cq notify). Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: convert multiple drivers to use netdev_for_each_mc_addr, part3Jiri Pirko2010-02-22
| | | | | Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: update copyright datesAjit Khaparde2010-02-19
| | | | | Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: don't rearm mcc cq when device is not openSathya Perla2010-02-17
| | | | | | | | | | | When an MCC cmd is issued (via a netdev/ethtool op) while the device is not open, the MCC CQ gets processed but the EQ is not processed (as isr is not registered.) This can cause the EQ to become full. So, while the device is not open, CQ must not be re-armed to prevent EQ entries. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: bug fix for flashing the BladeEngine3 ASICAjit Khaparde2010-02-12
| | | | | | | | Now flashing both BE2 and BE3 devices is supported. From: Naresh G <nareshg@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2010-01-28
|\ | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
| * be2net: Bug fix to support newer generation of BE ASICAjit Khaparde2010-01-28
| | | | | | | | | | | | | | Bug fix in be2net for newer generation of BladeEngine ASIC. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵David S. Miller2010-01-11
|\| | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/benet/be_cmds.h include/linux/sysctl.h
| * be2net: Bug fix to config NIC appropriately before loopback testSarveshwar Bandi2009-12-23
| | | | | | | | | | | | | | | | NIC controller has to be set to an appropriate mode before doing a loopback test. Test will fail otherwise. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | be2net: implements ethtool function to read eeprom data.Sarveshwar Bandi2010-01-08
|/ | | | | | | The patch implements a firmware command to fetch the eeprom data. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-12-09
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
| * Merge branch 'for-next' into for-linusJiri Kosina2009-12-07
| |\ | | | | | | | | | | | | | | | Conflicts: kernel/irq/chip.c
| | * tree-wide: fix assorted typos all over the placeAndré Goddard Rosa2009-12-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | be2net: Add support for ethtool self testSuresh R2009-12-03
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for ethtool selftest. From: Suresh R <sureshr@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | be2net: Support for WoL using magic packet after suspend.Ajit Khaparde2009-12-03
| | | | | | | | | | | | | | | | | | | | | | | | Add support for WOL using Magic Packet after suspend is done. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | be2net: Issue fw_init/clean cmds to fwSathya Perla2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These cmds are issued to the fw in probe/resume and remove/suspend paths to help fw execute some initialization and cleanup code. This change needed the be_hw_up() code to be refactored as be_get_config(). Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | be2net: support configuration of 64 multicast addresses instead of 32Sathya Perla2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | To send upto 64 addresses in the multicast-set cmd, the non-embeeded cmd format that provides for a bigger buffer is used instead of an embedded format. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | be2net: Patch to flash redboot section while firmware update.Sarveshwar Bandi2009-11-20
| | | | | | | | | | | | | | | | | | | | | | | | Please apply patch to update redboot section while firmware update. Code checks if section needs to be updated before actually doing it. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge branch 'master' of ↵David S. Miller2009-11-06
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/usb/cdc_ether.c All CDC ethernet devices of type USB_CLASS_COMM need to use '&mbm_info'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | be2net: Fix CQE_STATUS_EXTD_SHIFT defineSathya Perla2009-11-06
| |/ | | | | | | | | Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | be2net: Changes to update ethtool get_settings function to return ↵Sarveshwar Bandi2009-10-28
| | | | | | | | | | | | | | | | | | | | | | | | appropriate values. Update ethtool get_settings function to: - get current link speed settings from controller - get port transceiver type from controller - fill appropriate values for supported, phy_address Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵David S. Miller2009-10-27
|\| | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/sh_eth.c
| * be2net: fix promiscuous and multicast promiscuous modes being enabled alwaysSathya Perla2009-10-15
| | | | | | | | | | Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | be2net: Implement ethtool get_phys_id function.Sarveshwar Bandi2009-10-12
|/ | | | | Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: Fix a typo in be_cmds.hAjit Khaparde2009-10-06
| | | | | | | | MCC_STATUS_NOT_SUPPORTED should be decimal 66 not hex 66. This patch fixes this typo. Patch against net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: Workaround to fix a bug in Rx Completion processing.Ajit Khaparde2009-10-01
| | | | | | | | | | vtp bit in RX completion descriptor could be wrongly set in some skews of BladEngine. Ignore this bit if vtm is not set. Resending because the previous patch was against net-next tree. This patch is against the net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: fix some cmds to use mccq instead of mboxSathya Perla2009-09-17
| | | | | | | | All cmds issued to BE after the creation of mccq must now use the mcc-q (and not mbox) to avoid a hw issue that results in mbox poll timeout. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: Changes to support flashing of the be2 network adapterAjit Khaparde2009-09-07
| | | | | | | | | | | Changes to support flashing of the be2 network adapter using the request_firmware() & ethtool infrastructure. The trigger to flash the device will come from ethtool utility. The driver will invoke request_firmware() to start the flash process. The file containing the flash image is expected to be available in /lib/firmware/ Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: Patch to perform function reset at initializationsarveshwarb2009-08-05
| | | | | | | | | This patch is a bug fix to avoid system going into a bad state when driver is loaded in context of kdump kernel. The patch fixes the issue by performing a soft reset of pci function at probe time. Signed-off-by: sarveshwarb <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: some name changes for consistencySathya Perla2009-08-02
| | | | | | | | | be_mbox_db_ring() has been changed to be_mbox_notify() (to be consistent with be_mcc_notify()) and struct be_mcc_cq_entry changed to be_mcc_compl to be consistent with rx/tx_compl. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: get rid of be_ctrl_info struct/abstractionSathya Perla2009-08-02
| | | | | | | | | | Currently only the be_ctrl_info struct ptr (instead of adapter) is passed to all the routines in be_cmds.c. Instead pass be_adapter ptr to allow access to all its fields. Merge the contents of struct be_ctrl_info into be_adapter. The resulting code is simpler. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: receive asynchronous link status notifications from BESathya Perla2009-06-19
| | | | | | | | Rcv and process ansync link status notifications from BE instead of polling for link status in the be_worker thread. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: cleanup multicast_set cmd to avoid mc_list copySathya Perla2009-06-19
| | | | | | | | Cleanup multicast_set method to avoid an extra copy of mc_list and unwanted promiscuos sets to BE. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: Add MCC queue mechanism for BE cmdsSathya Perla2009-06-19
| | | | | | | | | | | | | Currenlty all cmds use the blocking MCC mbox to post cmds. An mbox cmd is protected via a spin_lock(cmd_lock) and not spin_lock_bh() as it is undesirable to disable BHs while a blocking mbox cmd is in progress (and take long to finish.) This can lockup a cmd in progress in process context. Instead cmds that may be called in BH context must use the MCC queue to post cmds. The cmd completions are rcvd in a separate completion queue and the events are placed in the tx-event queue. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add be2net driver.Sathya Perla2009-03-12
Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-28 06:49:44 -0500