aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/Kconfig
Commit message (Collapse)AuthorAge
* [PATCH] chelsio: working NAPIStephen Hemminger2006-12-11
| | | | | | | | | This driver tries to enable/disable NAPI at runtime, but does so in an unsafe manner, and the NAPI interrupt handling is a mess. Replace it with a compile time selected NAPI implementation. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] chelsio: use standard CRC routinesStephen Hemminger2006-12-02
| | | | | | | Replace driver crc calculation with existing library. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] chelsio: add 1G swcixw aupportStephen Hemminger2006-12-02
| | | | | | | Add support for 1G versions of Chelsio devices. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] chelsio: add support for other 10G boardsStephen Hemminger2006-12-02
| | | | | | | | | Add support for other versions of the 10G Chelsio boards. This is basically a port of the vendor driver with the TOE features removed. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] netxen: uses PCIRandy Dunlap2006-12-02
| | | | | | | | | | | | drivers/built-in.o: In function `netxen_nic_remove': netxen_nic_main.c:(.text+0x31b4d): undefined reference to `pci_disable_msi' netxen_nic_main.c:(.text+0x31b8e): undefined reference to `pci_release_regions' drivers/built-in.o: In function `netxen_init_module': netxen_nic_main.c:(.init.text+0x3f17): undefined reference to `pci_module_init' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] Atmel MACB ethernet driverHaavard Skinnemoen2006-12-02
| | | | | | | | | | | | | | | | | | | | | | | | | | Driver for the Atmel MACB on-chip ethernet module. Tested on AVR32/AT32AP7000/ATSTK1000. I've heard rumours that it works with AT91SAM9260 as well, and it may be possible to share some code with the at91_ether driver for AT91RM9200. Hardware documentation can be found in the AT32AP7000 data sheet, which can be downloaded from http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Changes since previous version: * Probe for PHY ID instead of depending on it being provided through platform_data. * Grab initial ethernet address from the MACB registers instead of depending on platform_data. * Set MII/RMII mode correctly. These changes are mostly about making the driver more compatible with the at91 infrastructure. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] Add tsi108/9 On Chip Ethernet device driver supportZang Roy-r619112006-12-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add tsi108/9 on chip Ethernet controller driver support. The driver code collects the feedback of previous posting form the mailing list and gives the update. MPC7448HPC2 platform in arch/powerpc uses tsi108 bridge. The following is a brief description of the Ethernet controller: The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent Gigabit Ethernet ports,E0 and E1. It uses a single Management interface to manage the two physical connection devices (PHYs). Each Ethernet port has its own statistics monitor that tracks and reports key interface statistics. Each port supports a 256-entry hash table for address filtering. In addition, each port is bridged to the Switch Fabric through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO. Each Ethernet port also has a pair of internal Ethernet DMA channels to support the transmit and receive data flows. The Ethernet DMA channels use descriptors set up in memory, the memory map of the device, and access via the Switch Fabric. The Ethernet Controller’s DMA arbiter handles arbitration for the Switch Fabric. The Controller also has a register bus interface for register accesses and status monitor control. The PMD (Physical Media Device) interface operates in MII, GMII, or TBI modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs. The GMII and TBI modes are used to connect with Gigabit PMDs. Internal data flows to and from the Ethernet Controller through the Switch Fabric. Each Ethernet port uses its transmit and receive DMA channels to manage data flows through buffer descriptors that are predefined by the system (the descriptors can exist anywhere in the system memory map). These descriptors are data structures that point to buffers filled with data ready to transmit over Ethernet, or they point to empty buffers ready to receive data from Ethernet. Signed-off-by: Alexandre Bounine <Alexandre.Bounine@tundra.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Add NetXen 1G/10G ethernet driver.Amit S. Kale2006-12-02
| | | | | Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'upstream-linus' of ↵Linus Torvalds2006-12-01
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] Fix an offset error when reading the CS89x0 ADD_PORT register [PATCH] spidernet: poor network performance [PATCH] Spidernet: remove ETH_ZLEN check in earlier patch [PATCH] bonding: fix an oops when slave device does not provide get_stats [PATCH] drivers/net: SAA9730: Fix build error Revert "[PATCH] zd1211rw: Removed unneeded packed attributes" [PATCH] zd1211rw: Fix of a locking bug [PATCH] softmac: remove netif_tx_disable when scanning [PATCH] ieee80211: Fix kernel panic when QoS is enabled
| * [PATCH] drivers/net: SAA9730: Fix build errorRalf Baechle2006-11-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Confusingly NET_PCI is also set for for non-PCI EISA configurations where building this driver will result in a build error due to a reference to pci_release_regions. While at it, remove the EXPERIMENTAL - in all its uglyness and despite the sincerest attempts of the buggy hardware the driver is known to work. Also limit the driver to the Atlas board - the only known system to ever use the SAA9730 before Phillips ended the short live of the SAA9730. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | Fix misc Kconfig typosMatt LaPlante2006-11-29
|/ | | | | | | | Fix various Kconfig typos. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [NET]: kconfig, correct traffic shaperJiri Slaby2006-11-07
| | | | | | | | | | | | As Patrick McHardy <kaber@trash.net> suggested, Traffic Shaper is now obsolete and alternative to it is no longer CBQ, since its problems with virtual devices, alter Kconfig text to reflect this -- put a link to the traffic schedulers as a whole. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] Kconfig: remove redundant NETDEVICES dependsRandy Dunlap2006-11-06
| | | | | | | | | | | drivers/net/Kconfig says: # All the following symbols are dependent on NETDEVICES - do not repeat # that for each of the symbols. so remove duplicate 'depends' uses of NETDEVICES. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] sky2: not experimentalStephen Hemminger2006-10-31
| | | | | | | The sky2 driver is no longer in experimental state. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [CRYPTO] users: Select ECB/CBC where neededPatrick McHardy2006-10-25
| | | | | | | | | | | | | | | | CRYPTO_MANAGER is selected automatically by CONFIG_ECB and CONFIG_CBC. config CRYPTO_ECB tristate "ECB support" select CRYPTO_BLKCIPHER select CRYPTO_MANAGER I've added CONFIG_ECB to the ones you mentioned and CONFIG_CBC to gssapi. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* [PATCH] ucc_geth: changes to ucc_geth driver as a result of qe_lib changes ↵Li Yang2006-10-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | and bugfixes changes due to qe_lib changes include: o removed inclusion of platform header file o removed platform_device code, replaced with of_device o removed typedefs o uint -> u32 conversions o removed following defines: QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER, BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET because they hid sizeof/in_be32/out_be32 operations from the reader. o removed irrelevant comments, added others to resemble removed BD_ defines o const'd and uncasted all get_property() assignments bugfixes, courtesy of Scott Wood, include: - Read phy_address as a u32, not u8. - Match on type == "network" as well as compatible == "ucc_geth", as device_is_compatible() will only compare up to the length of the test string, allowing "ucc_geth_phy" to match as well. - fixes the MAC setting code in ucc_geth.c. The old code was overwriting and dereferencing random stack contents. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Still more typo fixesMatt LaPlante2006-10-03
| | | | Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [NETDEV] config: revert part of previous patchRandy Dunlap2006-09-28
| | | | | | | | | | | Net devices should depend on NETDEVICES, so revert part of Paolo's previous patch. See http://marc.theaimsgroup.com/?l=linux-kernel&m=115566326218740&w=2 for history. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET] GT96100: Delete bitrotting ethernet driverRalf Baechle2006-09-22
| | | | | | | | | Code for the EV96100 evaluation board hasn't compiled since at least November 15, 2003, so it is being deleted as of 2.6.18 due to lack of a user base. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] mv643xx_eth: restrict to 32-bit PPC_MULTIPLATFORMDale Farnsworth2006-09-22
| | | | | | | | | No 64-bit PPC_MULTIPLATFORM platforms use the mv643xx_eth driver, so build it only on PPC32. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Sven Luther <sl@bplan-gmbh.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] ehea: IBM eHEA Ethernet Device DriverJan-Bernd Themann2006-09-13
| | | | | | | | | | | | | | | | | | | | | | | | | | Hi Jeff, I fixed the __iomem issue and tested the driver with sparse. Looks good so far. Thanks for your effort. Jan-Bernd Themann Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> drivers/net/Kconfig | 9 drivers/net/Makefile | 1 drivers/net/ehea/Makefile | 6 drivers/net/ehea/ehea.h | 447 ++++++ drivers/net/ehea/ehea_ethtool.c | 294 ++++ drivers/net/ehea/ehea_hcall.h | 51 drivers/net/ehea/ehea_hw.h | 287 ++++ drivers/net/ehea/ehea_main.c | 2654 ++++++++++++++++++++++++++++++++++++++++ drivers/net/ehea/ehea_phyp.c | 705 ++++++++++ drivers/net/ehea/ehea_phyp.h | 455 ++++++ drivers/net/ehea/ehea_qmr.c | 582 ++++++++ drivers/net/ehea/ehea_qmr.h | 358 +++++ 12 files changed, 5849 insertions(+) Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] pcnet32: NAPI implementationDon Fry2006-09-13
| | | | | | | | | | | | | | | | | | | | | | Implement NAPI changes to pcnet32 driver. Compile default is off. Listed as experimental. Len and Don both worked on a NAPI implementation and have both tested these changes. An e1000 blasting short packets to the pcnet32 will lockup Don's system until the receive storm stops. Without NAPI Len's system watchdog would expire causing the system to reboot. With NAPI the system will stay operational. Tested ia32 and ppc64. Tested '970A, '971, '972, '973, '975, '976, and '978. The Kconfig changes came from Len. Don is to blame for all the others. Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'upstream-fixes' into upstreamJeff Garzik2006-09-06
|\
| * [PATCH] myri10ge: update the firmware download URL in KconfigBrice Goglin2006-09-06
| | | | | | | | | | | | | | | | Update the firmware download URL in Kconfig to match the header in drivers/net/myri10ge/myri10ge.c. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | Merge branch 'upstream-fixes' into upstreamJeff Garzik2006-08-19
|\|
| * [PATCH] via-rhine: NAPI supportRoger Luethi2006-08-19
| | | | | | | | | | | | | | | | | | | | Add NAPI support to the via-rhine driver so that it can handle higher speeds and doesn't get overloaded by interrupts as easily. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Roger Luethi <rl@hellgate.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] Freescale QE UCC gigabit ethernet driverLi Yang2006-08-19
| | | | | | | | | | | | | | | | | | | | | | | | QE(QUICC Engine) is a new generation communication coprocessor, which can be found on some of the latest Freescale PowerQUICC CPUs(e.g. MPC8360). The UCC(Unified Communications Controller) module of QE can work as gigabit Ethernet device. This patch provides driver for the device. Signed-off-by: Shlomi Gridish <gridish@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | [PATCH] forcdeth: revised NAPI supportStephen Hemminger2006-08-08
| | | | | | | | | | | | | | | | | | | | | | | | Revised version of the forcedeth NAPI support. This version is based against netdev-2.6#upstream (after the MAC patches from Ayaz today). Can't use nv_disable_hw_interrupts because NAPI only wants to mask off receive irq's and leave the others alone. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | [PATCH] qla3xxx NIC driverRon Mercer2006-07-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a complementary network driver for our ISP4XXX parts. There is a concurrent effort underway to get the iSCSI driver (qla4xxx) integrated upstream as well. I have been through several iterations with the linux-netdev list and have had much response from Stephen Hemminger. - Built and tested using kernel 2.6.17-rc4. - The chip supports two ethernet and two iSCSI functions. - The functions ql_sem_lock, ql_sem_spinlock, ql_sem_unlock, and ql_wait_for_drvr_lock are used to protect resources that are shared across the network and iSCSI functions. This protection is mostly during chip initialization and resets, but also include link management. - The PHY/MII are not exported through ethtool due to the fact that the iSCSI function will control the common link at least 50% of the time. This driver has been through several iterations on the netdev list and we feel this driver is ready for inclusion in the upstream kernel. It has been built and tested on x86 and PPC64 platforms. Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | [PATCH] Cleanup SLHC configurationRalf Baechle2006-07-19
|/ | | | | | | | | Convert selection of serial line header compression to use CONFIG_SLHC rather than makefile ifeq uglyness. This makes it easier to select the SLHC module from other code. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'upstream-linus' of ↵Linus Torvalds2006-06-23
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (33 commits) [PATCH] myri10ge - drop workaround pci_save_state() disabling MSI [PATCH] myri10ge - drop workaround for the missing AER ext cap on nVidia CK804 via-velocity: the link is not correctly detected when the device starts [PATCH] add b44 to maintainers [PATCH] WAN: ioremap() failure checks in drivers [PATCH] WAN: register_hdlc_device() doesn't need dev_alloc_name() [PATCH] skb_padto()-area fixes in 8390, wavelan [PATCH] make drivers/net/forcedeth.c:nv_update_pause() static [PATCH] network driver for Hilscher netx [PATCH] Dereference in tokenring/olympic.c [PATCH] Array overrun in drivers/net/wireless/wavelan.c [PATCH] Remove useless check in drivers/net/pcmcia/xirc2ps_cs.c [PATCH] 8139cp: add ethtool eeprom support [PATCH] 8139cp: fix eeprom read command length [PATCH] b44: update b44 Kconfig entry [PATCH] b44: update version to 1.01 [PATCH] b44: add wol for old nic [PATCH] b44: add parameter [PATCH] b44: add wol [PATCH] b44: fix manual speed/duplex/autoneg settings ...
| * [PATCH] network driver for Hilscher netxSascha Hauer2006-06-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a patch for the Hilscher netx builtin ethernet ports. The netx board support was merged into 2.6.17-git2. The netx is a arm926 based SoC. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> -- drivers/net/Kconfig | 11 drivers/net/Makefile | 1 drivers/net/netx-eth.c | 516 ++++++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-netx/eth.h | 27 ++ 4 files changed, 555 insertions(+) Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] b44: update b44 Kconfig entryGary Zambrano2006-06-22
| | | | | | | | | | | | | | Deleted "EXPERIMENTAL" from b44 entry in Kconfig. Signed-off-by: Gary Zambrano <zambrano@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds2006-06-23
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits) [POWERPC] re-enable OProfile for iSeries, using timer interrupt [POWERPC] support ibm,extended-*-frequency properties [POWERPC] Extra sanity check in EEH code [POWERPC] Dont look for class-code in pci children [POWERPC] Fix mdelay badness on shared processor partitions [POWERPC] disable floating point exceptions for init [POWERPC] Unify ppc syscall tables [POWERPC] mpic: add support for serial mode interrupts [POWERPC] pseries: Print PCI slot location code on failure [POWERPC] spufs: one more fix for 64k pages [POWERPC] spufs: fail spu_create with invalid flags [POWERPC] spufs: clear class2 interrupt status before wakeup [POWERPC] spufs: fix Makefile for "make clean" [POWERPC] spufs: remove stop_code from struct spu [POWERPC] spufs: fix spu irq affinity setting [POWERPC] spufs: further abstract priv1 register access [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts [POWERPC] spufs: dont try to access SPE channel 1 count [POWERPC] spufs: use kzalloc in create_spu [POWERPC] spufs: fix initial state of wbox file ... Manually resolved conflicts in: drivers/net/phy/Makefile include/asm-powerpc/spu.h
| * [POWERPC] spufs: split the Cell BE support into generic and platform ↵Geoff Levand2006-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dependant parts Creates new config variables PPC_CELL_NATIVE and PPC_IBM_CELL_BLADE. The existing CONFIG_PPC_CELL is now used to denote the generic Cell processor support. PPC_CELL = make descends into platforms/cell PPC_CELL_NATIVE = add bare metal support PPC_IBM_CELL_BLADE = add blade device drivers, etc. Also renames spu_priv1.c to spu_priv1_mmio.c. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Add Vitesse 8244 PHY for MPC8641 HPCN platform.Jon Loeliger2006-06-21
| | | | | | | | | | | | | | | | Signed-off-by: Kriston Carson <KristonCarson@freescale.com> Signed-off-by: Xianghua Xiao <x.xiao@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2006-06-19
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (109 commits) [ETHTOOL]: Fix UFO typo [SCTP]: Fix persistent slowdown in sctp when a gap ack consumes rx buffer. [SCTP]: Send only 1 window update SACK per message. [SCTP]: Don't do CRC32C checksum over loopback. [SCTP] Reset rtt_in_progress for the chunk when processing its sack. [SCTP]: Reject sctp packets with broadcast addresses. [SCTP]: Limit association max_retrans setting in setsockopt. [PFKEYV2]: Fix inconsistent typing in struct sadb_x_kmprivate. [IPV6]: Sum real space for RTAs. [IRDA]: Use put_unaligned() in irlmp_do_discovery(). [BRIDGE]: Add support for NETIF_F_HW_CSUM devices [NET]: Add NETIF_F_GEN_CSUM and NETIF_F_ALL_CSUM [TG3]: Convert to non-LLTX [TG3]: Remove unnecessary tx_lock [TCP]: Add tcp_slow_start_after_idle sysctl. [BNX2]: Update version and reldate [BNX2]: Use CPU native page size [BNX2]: Use compressed firmware [BNX2]: Add firmware decompression [BNX2]: Allow WoL settings on new 5708 chips ... Manual fixup for conflict in drivers/net/tulip/winbond-840.c
| * | [BNX2]: Add firmware decompressionMichael Chan2006-06-18
| |/ | | | | | | | | | | | | | | | | | | | | Add functions to decompress firmware before loading to the internal CPUs. Compressing the firmware reduces the driver size significantly. Added file name length sanity check in the gzip header to prevent going past the end of buffer [suggested by DaveM]. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | [PATCH] net: au1000_eth: PHY framework conversionHerbert Valerio Riedel2006-06-11
| | | | | | | | | | | | | | | | convert au1000_eth driver to use PHY framework and garbage collected functions and identifiers that became unused/obsolete in the process Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | [PATCH] smc911x Kconfig fixAndrew Morton2006-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In file included from drivers/net/smc911x.c:84: drivers/net/smc911x.h:46:9: warning: "SMC_USE_16BIT" is not defined drivers/net/smc911x.h:60:9: warning: "SMC_USE_32BIT" is not defined drivers/net/smc911x.h:73:10: warning: "SMC_USE_PXA_DMA" is not defined drivers/net/smc911x.c: In function `smc911x_reset': drivers/net/smc911x.c:247: warning: implicit declaration of function `SMC_inl' drivers/net/smc911x.c:249: warning: implicit declaration of function `SMC_outl' Cc: Dustin McIntire <dustin@sensoria.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | [PATCH] Add Myri-10G Ethernet driverBrice Goglin2006-05-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew J. Gallatin <gallatin@myri.com> drivers/net/Kconfig | 17 drivers/net/Makefile | 1 drivers/net/myri10ge/Makefile | 5 drivers/net/myri10ge/myri10ge.c | 2851 +++++++++++++++ drivers/net/myri10ge/myri10ge_mcp.h | 205 + drivers/net/myri10ge/myri10ge_mcp_gen_header.h | 58 include/linux/pci_ids.h | 1 7 files changed, 3138 insertions(+) Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | [PATCH] RE: [PATCH 1/1] net driver: Add support for SMSC LAN911x line of ↵Dustin McIntire2006-04-20
|/ | | | | | | | | | | | | | | | | ethernet chips > > The patch was badly wordwrapped. Please fix and resend. > OK, I've fixed the wrapping and removed the CONFIG_ARM restriction. I've also did my best to modify the C style to conform to the comments. I noticed that the patch is getting ignored by majordomo due to its size >100K. Should it be broken up somehow to allow posting to the lists? Signed-off-by: Dustin McIntire <dustin@sensoria.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] uml: kconfigsAl Viro2006-03-31
| | | | | | | | | | kconfig sanitized around drivers/net Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds2006-03-23
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (78 commits) [PATCH] powerpc: Add FSL SEC node to documentation [PATCH] macintosh: tidy-up driver_register() return values [PATCH] powerpc: tidy-up of_register_driver()/driver_register() return values [PATCH] powerpc: via-pmu warning fix [PATCH] macintosh: cleanup the use of i2c headers [PATCH] powerpc: dont allow old RTC to be selected [PATCH] powerpc: make powerbook_sleep_grackle static [PATCH] powerpc: Fix warning in add_memory [PATCH] powerpc: update mailing list addresses [PATCH] powerpc: Remove calculation of io hole [PATCH] powerpc: iseries: Add bootargs to /chosen [PATCH] powerpc: iseries: Add /system-id, /model and /compatible [PATCH] powerpc: Add strne2a() to convert a string from EBCDIC to ASCII [PATCH] powerpc: iseries: Make more stuff static in platforms/iseries/mf.c [PATCH] powerpc: iseries: Remove pointless iSeries_(restart|power_off|halt) [PATCH] powerpc: iseries: mf related cleanups [PATCH] powerpc: Replace platform_is_lpar() with a firmware feature [PATCH] powerpc: trivial: Cleanup whitespace in cputable.h [PATCH] powerpc: Remove unused iommu_off logic from pSeries_init_early() [PATCH] powerpc: Unconfuse htab_bolt_mapping() callers ...
| * [PATCH] spidernet: select FW_LOADERChristoph Hellwig2006-03-16
| | | | | | | | | | | | | | | | The spidernet drivers uses request_firmware() and thus needs to select FW_LOADER. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | Fix spelling in E1000_DISABLE_PACKET_SPLIT Kconfig descriptionJames Ring2006-03-21
| | | | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | [PATCH] CONFIG_FORCEDETH updatesAdrian Bunk2006-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch contains the following possible updates: - let FORCEDETH no longer depend on EXPERIMENTAL - remove the "Reverse Engineered" from the option text: for the user it's important which hardware the driver supports, not how it was developed Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | Merge branch 'upstream-fixes'Jeff Garzik2006-03-11
|\|
| * [PATCH] NE2000 Kconfig help entry improvementJesper Juhl2006-03-11
| | | | | | | | | | | | | | | | | | Improve reference to PCI NE2K support in ISA NE2K documentation. Original 2.4 patch From: Ged Haywood <ged@jubileegroup.co.uk> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | [PATCH] remove obsolete sis900 documentationAdrian Bunk2006-03-04
| | | | | | | | | | | | | | | | This documentation is mostly obsolete, and should therefore either be updated or removed (this patch does the latter). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-18 22:57:41 -0500