aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mtd
Commit message (Collapse)AuthorAge
* Merge tag 'upstream-3.16-rc6' of git://git.infradead.org/linux-ubifsLinus Torvalds2014-07-18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Pull UBI fixes from Artem Bityutskiy: "Two UBI fastmap-related fixes for v3.16: - fix UBI fastmap support which we broke in 3.16-rc1 by reversing the volumes RB-tree sorting criteria. - make sure that we scrub all PEBs where we see bit-flips - we were missing some of them when the fastmap feature was enabled" * tag 'upstream-3.16-rc6' of git://git.infradead.org/linux-ubifs: UBI: fastmap: do not miss bit-flips UBI: fix the volumes tree sorting criteria
| * UBI: fastmap: do not miss bit-flipsBrian Norris2014-07-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The return value from 'ubi_io_read_ec_hdr()' was stored in 'err', not in 'ret'. This fix makes sure Fastmap-enabled UBI does not miss bit-flip while reading EC headers, events and scrubs the affected PEBs. This issue was reported by Coverity Scan. Artem: improved the commit message. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * UBI: fix the volumes tree sorting criteriaHeiko Schocher2014-07-01
| | | | | | | | | | | | | | | | | | | | | | | | | | Commig "604b592 UBI: fix rb_tree node comparison in add_map" broke fastmap backward compatibility and older fastmap images cannot be mounted anymore. The reason is that it changes the volumes RB-tree sorting criteria. This patch fixes the problem. Artem: re-write the commit message Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* | mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NORAndrea Adami2014-07-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This family of chips was long ago supported by the pre-cfi driver. CFI code tested on several Zaurus SL-5500 (Collie) 2x16 on 32 bit bus. Function is_LH28F640BF() mimics is_m29ew() from cmdset_0002.c Buffer write fixes as seen in 2007 patch c/o Anti Sullin <anti.sullin <at> artecdesign.ee> http://comments.gmane.org/gmane.linux.ports.arm.kernel/36733 [Brian: this patch is semi-urgent, because the following patch switches to using CFI detection for a chip which (until now) is unsupported by the CFI driver 9218310 ARM: 8084/1: sa1100: collie: revert back to cfi_probe ] Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* | mtd: nand: reduce the warning noise when the ECC is too weakThomas Petazzoni2014-07-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 67a9ad9b8a6f ("mtd: nand: Warn the user if the selected ECC strength is too weak"), a check was added to inform the user when the ECC used for a NAND device is weaker than the recommended ECC advertised by the NAND chip. However, the warning uses WARN_ON(), which has two undesirable side-effects: - It just prints to the kernel log the fact that there is a warning in this file, at this line, but it doesn't explain anything about the warning itself. - It dumps a stack trace which is very noisy, for something that the user is most likely not able to fix. If a certain ECC used by the kernel is weaker than the advertised one, it's most likely to make sure the kernel uses an ECC that is compatible with the one used by the bootloader, and changing the bootloader may not necessarily be easy. Therefore, normal users would not be able to do anything to fix this very noisy warning, and will have to suffer from it at every kernel boot. At least every time I see this stack trace in my kernel boot log, I wonder what new thing is broken, just to realize that it's once again this NAND ECC warning. Therefore, this commit turns: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at /home/thomas/projets/linux-2.6/drivers/mtd/nand/nand_base.c:4051 nand_scan_tail+0x538/0x780() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-rc3-dirty #4 [<c000e3dc>] (unwind_backtrace) from [<c000bee4>] (show_stack+0x10/0x14) [<c000bee4>] (show_stack) from [<c0018180>] (warn_slowpath_common+0x6c/0x8c) [<c0018180>] (warn_slowpath_common) from [<c001823c>] (warn_slowpath_null+0x1c/0x24) [<c001823c>] (warn_slowpath_null) from [<c02c50cc>] (nand_scan_tail+0x538/0x780) [<c02c50cc>] (nand_scan_tail) from [<c0639f78>] (orion_nand_probe+0x224/0x2e4) [<c0639f78>] (orion_nand_probe) from [<c026da00>] (platform_drv_probe+0x18/0x4c) [<c026da00>] (platform_drv_probe) from [<c026c1f4>] (really_probe+0x80/0x218) [<c026c1f4>] (really_probe) from [<c026c47c>] (__driver_attach+0x98/0x9c) [<c026c47c>] (__driver_attach) from [<c026a8f0>] (bus_for_each_dev+0x64/0x94) [<c026a8f0>] (bus_for_each_dev) from [<c026bae4>] (bus_add_driver+0x144/0x1ec) [<c026bae4>] (bus_add_driver) from [<c026cb00>] (driver_register+0x78/0xf8) [<c026cb00>] (driver_register) from [<c026da5c>] (platform_driver_probe+0x20/0xb8) [<c026da5c>] (platform_driver_probe) from [<c00088b8>] (do_one_initcall+0x80/0x1d8) [<c00088b8>] (do_one_initcall) from [<c0620c9c>] (kernel_init_freeable+0xf4/0x1b4) [<c0620c9c>] (kernel_init_freeable) from [<c049a098>] (kernel_init+0x8/0xec) [<c049a098>] (kernel_init) from [<c00095f0>] (ret_from_fork+0x14/0x24) ---[ end trace 62f87d875aceccb4 ]--- Into the much shorter, and much more useful: nand: WARNING: MT29F2G08ABAEAWP: the ECC used on your system is too weak compared to the one required by the NAND chip Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* | mtd: devices: elm: fix elm_context_save() and elm_context_restore() functionsTed Juan2014-07-05
|/ | | | | | | | | | These two function's switch case lack the 'break' that make them always return error. Signed-off-by: Ted Juan <ted.juan@gmail.com> Acked-by: Pekon Gupta <pekon@ti.com> Cc: <stable@vger.kernel.org> # 3.12.x+ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2014-06-12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "This the bunch that sat in -next + lock_parent() fix. This is the minimal set; there's more pending stuff. In particular, I really hope to get acct.c fixes merged this cycle - we need that to deal sanely with delayed-mntput stuff. In the next pile, hopefully - that series is fairly short and localized (kernel/acct.c, fs/super.c and fs/namespace.c). In this pile: more iov_iter work. Most of prereqs for ->splice_write with sane locking order are there and Kent's dio rewrite would also fit nicely on top of this pile" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits) lock_parent: don't step on stale ->d_parent of all-but-freed one kill generic_file_splice_write() ceph: switch to iter_file_splice_write() shmem: switch to iter_file_splice_write() nfs: switch to iter_splice_write_file() fs/splice.c: remove unneeded exports ocfs2: switch to iter_file_splice_write() ->splice_write() via ->write_iter() bio_vec-backed iov_iter optimize copy_page_{to,from}_iter() bury generic_file_aio_{read,write} lustre: get rid of messing with iovecs ceph: switch to ->write_iter() ceph_sync_direct_write: stop poking into iov_iter guts ceph_sync_read: stop poking into iov_iter guts new helper: copy_page_from_iter() fuse: switch to ->write_iter() btrfs: switch to ->write_iter() ocfs2: switch to ->write_iter() xfs: switch to ->write_iter() ...
| * Merge commit '9f12600fe425bc28f0ccba034a77783c09c15af4' into for-linusAl Viro2014-06-12
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | Backmerge of dcache.c changes from mainline. It's that, or complete rebase... Conflicts: fs/splice.c Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | replace checking for ->read/->aio_read presence with check in ->f_modeAl Viro2014-05-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we are about to introduce new methods (read_iter/write_iter), the tests in a bunch of places would have to grow inconveniently. Check once (at open() time) and store results in ->f_mode as FMODE_CAN_READ and FMODE_CAN_WRITE resp. It might end up being a temporary measure - once everything switches from ->aio_{read,write} to ->{read,write}_iter it might make sense to return to open-coded checks. We'll see... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | Merge tag 'modules-next-for-linus' of ↵Linus Torvalds2014-06-11
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Most of this is cleaning up various driver sysfs permissions so we can re-add the perm check (we unified the module param and sysfs checks, but the module ones were stronger so we weakened them temporarily). Param parsing gets documented, and also "--" now forces args to be handed to init (and ignored by the kernel). Module NX/RO protections get tightened: we now set them before calling parse_args()" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: set nx before marking module MODULE_STATE_COMING. samples/kobject/: avoid world-writable sysfs files. drivers/hid/hid-picolcd_fb: avoid world-writable sysfs files. drivers/staging/speakup/: avoid world-writable sysfs files. drivers/regulator/virtual: avoid world-writable sysfs files. drivers/scsi/pm8001/pm8001_ctl.c: avoid world-writable sysfs files. drivers/hid/hid-lg4ff.c: avoid world-writable sysfs files. drivers/video/fbdev/sm501fb.c: avoid world-writable sysfs files. drivers/mtd/devices/docg3.c: avoid world-writable sysfs files. speakup: fix incorrect perms on speakup_acntsa.c cpumask.h: silence warning with -Wsign-compare Documentation: Update kernel-parameters.tx param: hand arguments after -- straight to init modpost: Fix resource leak in read_dump()
| * | | drivers/mtd/devices/docg3.c: avoid world-writable sysfs files.Rusty Russell2014-05-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In line with practice for module parameters, we're adding a build-time check that sysfs files aren't world-writable. Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* | | | Merge tag 'for-linus-20140610' of git://git.infradead.org/linux-mtdLinus Torvalds2014-06-11
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD updates from Brian Norris: - refactor m25p80.c driver for use as a general SPI NOR framework for other drivers which may speak to SPI NOR flash without providing full SPI support (i.e., not part of drivers/spi/) - new Freescale QuadSPI driver (utilizing new SPI NOR framework) - updates for the STMicro "FSM" SPI NOR driver - fix sync/flush behavior on mtd_blkdevs - fixup subpage write support on a few NAND drivers - correct the MTD OOB test for odd-sized OOB areas - add BCH-16 support for OMAP NAND - fix warnings and trivial refactoring - utilize new ECC DT bindings in pxa3xx NAND driver - new LPDDR NVM driver - address a few assorted bugs caught by Coverity - add new imx6sx support for GPMI NAND - use a bounce buffer for NAND when non-DMA-able buffers are used * tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd: (77 commits) mtd: gpmi: add gpmi support for imx6sx mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVE mtd: bf5xx_nand: use the managed version of kzalloc mtd: pxa3xx_nand: make the driver work on big-endian systems mtd: nand: omap: fix omap_calculate_ecc_bch() for-loop error mtd: nand: r852: correct write_buf loop bounds mtd: nand_bbt: handle error case for nand_create_badblock_pattern() mtd: nand_bbt: remove unused variable mtd: maps: sc520cdp: fix warnings mtd: slram: fix unused variable warning mtd: pfow: remove unused variable mtd: lpddr: fix Kconfig dependency, for I/O accessors mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling mtd: nand: Warn the user if the selected ECC strength is too weak mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ? mtd: nand: omap: add support for BCH16_ECC - NAND driver updates mtd: nand: omap: add support for BCH16_ECC - ELM driver updates mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates ...
| * | | | mtd: gpmi: add gpmi support for imx6sxHuang Shijie2014-05-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gpmi's IP for imx6sx is nearly the same as the gpmi's IP for imx6q, except the following two new features: (1) the new BCH contoller has 62-BIT correcting ECC strength (The BCH for imx6q only has 40-BIT ECC strength). (2) add the hardware Randomizer support. This patch does the follow changes: (1) add a new macro GPMI_IS_MX6SX to represent the imx6sx's gpmi. (2) add a new macro GPMI_IS_MX6. We use this macro to initialize the same registers for both imx6sx and imx6q, and so on. (3) add a new gpmi_devdata instance, the gpmi_devdata_imx6sx, for imx6sx. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVEPaul Bolle2014-05-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since (a few releases before) v2.6.0 there have been checks for CONFIG_MTD_SUPERH_RESERVE. One check is still present. But a Kconfig symbol MTD_SUPERH_RESERVE has never been added. So a few lines of dead code can be removed. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: bf5xx_nand: use the managed version of kzallocHimangi Saraogi2014-05-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions. Also, the now unnecessary label out_err_hw_init is done away with and the label out_err_kzalloc is renamed to out_err. The following Coccinelle semantic patch was used for making the change: @platform@ identifier p, probefn, removefn; @@ struct platform_driver p = { .probe = probefn, .remove = removefn, }; @prb@ identifier platform.probefn, pdev; expression e, e1, e2; @@ probefn(struct platform_device *pdev, ...) { <+... - e = kzalloc(e1, e2) + e = devm_kzalloc(&pdev->dev, e1, e2) ... ?-kfree(e); ...+> } @rem depends on prb@ identifier platform.removefn; expression e; @@ removefn(...) { <... - kfree(e); ...> } Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: pxa3xx_nand: make the driver work on big-endian systemsThomas Petazzoni2014-05-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pxa3xx_nand driver currently uses __raw_writel() and __raw_readl() to access I/O registers. However, those functions do not do any endianness swapping, which means that they won't work when the CPU runs in big-endian but the I/O registers are little endian, which is the common situation for ARM systems running big endian. Since __raw_writel() and __raw_readl() do not include any memory barriers and the pxa3xx_nand driver can only be compiled for ARM platforms, the closest I/o accessors functions that do endianess swapping are writel_relaxed() and readl_relaxed(). This patch has been verified to work on Armada XP GP: without the patch, the NAND is not detected when the kernel runs big endian while it is properly detected when the kernel runs little endian. With the patch applied, the NAND is properly detected in both situations (little and big endian). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: <stable@vger.kernel.org> # v3.13+ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: nand: omap: fix omap_calculate_ecc_bch() for-loop errorTed Juan2014-05-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes: 2c9f2365d1e1d0e318b068f683f18c99515b80f8 mtd: nand: omap: ecc.calculate: merge omap3_calculate_ecc_bch4 in omap_calculate_ecc_bch Fixes: 7bcd1dca1d587ad29f9825ba4414620440e8c8da mtd: nand: omap: ecc.calculate: merge omap3_calculate_ecc_bch8 in omap_calculate_ecc_bch Cc: <stable@vger.kernel.org> # 3.13.x+ Signed-off-by: Ted Juan <ted.juan@gmail.com> Acked-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: nand: r852: correct write_buf loop boundsBrian Norris2014-05-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The two loops in r852_write_buf() are designed to handle 4-byte-aligned and then 1-byte-aligned portions, respectively. However, there are two issues: (1) The first loop will only terminate if 'len' is a multiple of 4 (2) The second loop will never terminate if it runs at least once Rewrite these loops as they were probably intended. Compile tested only. Issues pointed out by Coverity Scan. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com>
| * | | | mtd: nand_bbt: handle error case for nand_create_badblock_pattern()Brian Norris2014-05-28
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: nand_bbt: remove unused variableBrian Norris2014-05-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set, but unused, variable. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: maps: sc520cdp: fix warningsBrian Norris2014-05-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On m86k, and maybe a few other architectures, we get this kind of warning, due to misuse of volatile: drivers/mtd/maps/sc520cdp.c: In function 'sc520cdp_setup_par': >> drivers/mtd/maps/sc520cdp.c:223:2: warning: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [enabled by default] arch/m68k/include/asm/raw_io.h:22:13: note: expected 'void *' but argument is of type 'volatile long unsigned int *' Rather than annotating the variable declaration, let's just use the proper accessors, which add the 'volatile' qualifier to the operation. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: slram: fix unused variable warningBrian Norris2014-05-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/mtd/devices/slram.c: In function 'init_slram': drivers/mtd/devices/slram.c:283:6: warning: variable 'i' set but not used [-Wunused-but-set-variable] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: lpddr: fix Kconfig dependency, for I/O accessorsBrian Norris2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not all architectures implement a writel_relaxed() accessor. Hopefully this will change eventually, but for now, this means lpddr2_nvm.c can't compile on some architectures. Let's add an ARM dependency for now, and leave a comment so maybe we can change this in the future. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Vincenzo Aliberti <vincenzo.aliberti@gmail.com>
| * | | | mtd: nand: pxa3xx: Use ECC strength and step size devicetree bindingEzequiel Garcia2014-05-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the user to specify the ECC strength and step size through the devicetree. We keep the previous behavior, when there is no DT parameter provided. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: nand: pxa3xx: Clean pxa_ecc_init() error handlingEzequiel Garcia2014-05-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's make pxa_ecc_init() return a negative errno on error or zero if succesful, which is standard kernel practice. Also, report the selected ECC strength and step size, which is important information. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: nand: Warn the user if the selected ECC strength is too weakEzequiel Garcia2014-05-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit makes use of the chip->ecc_strength_ds and chip->ecc_step_ds which contain the datasheet minimum requested ECC strength to produce a noisy warning if the configured ECC strength is weaker. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: nand: omap: add support for BCH16_ECC - NAND driver updatespekon gupta2014-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add support for BCH16 ecc-scheme in OMAP NAND driver, by extending following functions: - omap_enable_hwecc (nand_chip->ecc.hwctl): configure GPMC controller - omap_calculate_ecc_bch (nand_chip->ecc.calculate): fetch ECC signature from GPMC controller - omap_elm_correct_data (nand_chip->ecc.correct): detect and correct ECC errors using ELM (a) BCH16 ecc-scheme can detect and correct 16 bit-flips per 512Bytes of data. (b) BCH16 ecc-scheme generates 26-bytes of ECC syndrome / 512B. Due to (b) this scheme can only be used with NAND devices which have enough OOB to satisfy the relation: "OOBsize per page >= 26 * (page-size / 512)" Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: nand: omap: add support for BCH16_ECC - ELM driver updatespekon gupta2014-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELM hardware engine is used to detect ECC errors for BCHx ecc-schemes (like BCH4/BCH8/BCH16). This patch extends configuration of ELM registers for adding support of BCH16_HW ecc-scheme. Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | NAND_ECC_SOFT_BCH can support subpage reads tooRon Lee2014-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ron Lee <ron@debian.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: lpddr: add driver for LPDDR2-NVM PCM memoriesVincenzo Aliberti2014-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Vincenzo Aliberti <vincenzo.aliberti@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: Kconfig: give the CFI command set version in prompt and helpPhilippe De Muyter2014-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enhances the help for the CFI command set choices. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: fsl_ifc_nand: Workaround bogus WP on 16-bit NANDJoe Schultz2014-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A workaround was already in place that set the WP bit in the IFC_CSPR0 register after a STATUS command, however it used an 8-bit write method. As a result, the WP bit was never set on 16-bit devices, and these devices would eventually be incorrectly marked as write-protected. This patch checks the chip options for a 16-bit device and uses the appropriate write method to set the WP bit after a STATUS command. Signed-off-by: Joe Schultz <jschultz@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: fsl_ifc_nand: Use void type for IFC bufferAaron Sierra2014-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IFC buffer is accessed via 8-bit and 16-bit accessors. Changing the 'addr' member of 'struct fsl_ifc_nand_ctrl' from 'u8 __iomem *' to 'void __iomem *' eliminates the need for explicit casts when the 16-bit accessors are used. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: cfi: indent some if statementsDan Carpenter2014-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The break statements should be indented another tab. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: nand: Add support to use nand_base poi databuf as bounce bufferKamal Dasu2014-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nand_base can be passed a kmap()'d buffers from highmem by filesystems like jffs2. This results in failure to map the physical address of the DMA buffer on various contoller driver on different platforms. This change adds a chip option to use preallocated databuf as bounce buffers used in nand_do_read_ops() and nand_do_write_ops(). This allows for specific nand controller driver to set this option as needed. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: eLBC NAND: fix subpage write supportPekon Gupta2014-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As subpage write is enabled by default for all drivers, nand_write_subpage_hwecc causes a crash if the driver did not register ecc->hwctl or ecc->calculate. This behavior was introduced in commit 837a6ba4f3b6d23026674e6af6b6849a4634fff9 "mtd: nand: subpage write support for hardware based ECC schemes". This fixes a crash by emulating subpage write support by padding sub-page data with 0xff on either sides to make it full page compatible. Reported-by: Helmut Schaa <helmut.schaa@googlemail.com> Tested-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Scott Wood <scottwood@freescale.com> Cc: <stable@vger.kernel.org> # 3.10.x+ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: onenand: fix build warning for dma typeArnd Bergmann2014-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The samsung onenand driver passes around a dma address token through a void pointer, which is incorrect and leads to warnings like this one: onenand/samsung.c:548:2: warning: passing argument 1 of '__fswab32' makes integer from pointer without a cast [enabled by default] writel(src, base + S5PC110_DMA_SRC_ADDR); ^ This patch makes it use dma_addr_t here, which is more appropriate. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: orion_nand: Make of_device_id array constJingoo Han2014-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: nand: pxa3xx: Make of_device_id array constJingoo Han2014-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: st_spi_fsm: Make of_device_id array constJingoo Han2014-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: Fix warning in access_ok() parameter passingGeert Uytterhoeven2014-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On m68k, where access_ok() doesn't cast the address parameter: drivers/mtd/mtdchar.c: In function 'mtdchar_write_ioctl': drivers/mtd/mtdchar.c:575:4: warning: passing argument 2 of 'access_ok' makes pointer from integer without a cast [enabled by default] arch/m68k/include/asm/uaccess_mm.h:17:90: note: expected 'const void *' but argument is of type '__u64' drivers/mtd/mtdchar.c:576:4: warning: passing argument 2 of 'access_ok' makes pointer from integer without a cast [enabled by default] arch/m68k/include/asm/uaccess_mm.h:17:90: note: expected 'const void *' but argument is of type '__u64' The address parameter of access_ok() is really a userspace pointer. On most architectures, access_ok() is a macro that casts the address parameter, hiding issues in its users. Move around and use the existing usr_data and usr_oob temporary variables to kill the warnings. Add a few "consts", and make more use of the temporaries while we're at it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: nand: omap: fix BCHx ecc.correct to return detected bit-flips in ↵pekon gupta2014-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | erased-page fixes: commit 62116e5171e00f85a8d53f76e45b84423c89ff34 mtd: nand: omap2: Support for hardware BCH error correction. In omap_elm_correct_data(), if bitflip_count in an erased-page is within the correctable limit (< ecc.strength), then it is not indicated back to the caller ecc->read_page(). This mis-guides upper layers like MTD and UBIFS layer to assume erased-page as perfectly clean and use it for writing even if actual bitflip_count was dangerously high (bitflip_count > mtd->bitflip_threshold). This patch fixes this above issue, by returning 'stats' to caller ecc->read_page() under all scenarios. Reported-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Pekon Gupta <pekon@ti.com> Cc: <stable@vger.kernel.org> # 3.9.x+ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: spi-nor: Enable Dual and Quad SPI read transfers for s25sl032pGeert Uytterhoeven2014-05-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Spansion s25sl032p supports Dual and Quad SPI transfers, hence set the SPI_NOR_DUAL_READ and SPI_NOR_QUAD_READ flags. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: m25p80: Revive dual read supportGeert Uytterhoeven2014-05-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 03e296f613affcc2671c1e86d8c25ecad867204e ("mtd: m25p80: use the SPI nor framework") accidentally removed support for Dual SPI read transfers. Add it back. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: elm: compile suspend/resume only with PM_SLEEPWolfram Sang2014-05-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes: drivers/mtd/devices/elm.c:480:12: warning: 'elm_suspend' defined but not used [-Wunused-function] drivers/mtd/devices/elm.c:488:12: warning: 'elm_resume' defined but not used [-Wunused-function] Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: Fix Elan SC520 dependenciesJean Delvare2014-05-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Anyone working with an AMD Elan SC520 development or evaluation board would be building a dedicated kernel for it, so we can make the sc520cdp and netsc520 maps depend on MELAN. SC520_CPUFREQ already depends on MELAN so it makes things more consistent. It also makes kernel configuration for every other x86 user easier. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: nand: refactor erase_cmd() to return chip statusBrian Norris2014-05-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The nand_chip::erase_cmd callback previously served a dual purpose; for one, it allowed a per-flash-chip override, so that AG-AND devices could use a different erase command than other NAND. These AND devices were dropped in commit 14c6578683367b1e7af0c3c09e872b45a45183a7 (mtd: nand: remove AG-AND support). On the other hand, some drivers (denali and doc-g4) need to use this sort of callback to implement controller-specific erase operations. To make the latter operation easier for some drivers (e.g., ST's new BCH NAND driver), it helps if the command dispatch and wait functions can be lumped together, rather than called separately. This patch does two things: 1. Pull the call to chip->waitfunc() into chip->erase_cmd(), and return the status from this callback 2. Rename erase_cmd() to just erase(), since this callback does a little more than just send a command Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Lee Jones <lee.jones@linaro.org>
| * | | | mtd: nand: fix a typo in a comment lineMasahiro Yamada2014-04-29
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: mtd_oobtest: generate consistent data for verificationAkinobu Mita2014-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mtd_oobtest writes OOB, read it back and verify. The verification is not correctly done if oobsize is not multiple of 4. Although the data to be written and the data to be compared are generated by several prandom_byte_state() calls starting with the same seed, these two are generated with the different size and different number of calls. Due to the implementation of prandom_byte_state() if the size on each call is not multiple of 4, the resulting data is not always same. This fixes it by just calling prandom_byte_state() once and using correct range instead of calling it multiple times for each. Reported-by: George Cherian <george.cherian@ti.com> Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Cc: George Cherian <george.cherian@ti.com> Cc: Lothar Waßmann <LW@KARO-electronics.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | Merge branch 'spinor'Brian Norris2014-04-17
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | Addition of the spi-nor framework, plus updates to the ST SPI FSM driver.
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-14 13:36:04 -0500