aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mtd
Commit message (Collapse)AuthorAge
* cache invalidation error for buffered writeMassimo Cirillo2008-01-11
| | | | | | | | | | | | | | | | The bug causes corruptions of data read from flash. The original code performs cache invalidation from "adr" to "adr + len" in do_write_buffer(). Since len and adr could be updated in the code before invalidation - it causes improper setting of cache invalidation regions. Signed-off-by: Massimo Cirillo <maxcir@gmail.com> Signed-off-by: Giuseppe D'Eliseo <giuseppedeliseo@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jörn Engel <joern@logfs.org> Signed-off-by: David Woohouse <dwmw2@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Eliminate pointless casts from void* in a few driver irq handlers.Jeff Garzik2007-10-23
| | | | Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* [MTD] [NOR] Fix deadlock in Intel chip driver caused by get_chip recursionAlexey Korolev2007-10-23
| | | | | | | | | | This patch solves kernel deadlock issue seen on JFFF2 simultaneous operations. Detailed investigation of the issue showed that the kernel deadlock is caused by tons of recursive get_chip calls. Signed-off-by: Alexey Korolev <akorolev@infradead.org> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [OneNAND] Fix wrong free the static address in onenand_simKyungmin Park2007-10-22
| | | | | | Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NAND] Replace -1 with -EBADMSG in nand error correction codeJörn Engel2007-10-20
| | | | | | | | Magic numerical values are just bad style. Particularly so when undocumented. Signed-off-by: Jörn Engel <joern@logfs.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NAND] treat any negative return value from correct() as an errorMatt Reimer2007-10-20
| | | | | | | | Treat any negative return value from a NAND driver's correct() function as a failure, rather than just -1. Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NAND] nandsim: bugfix in initializationArtem Bityutskiy2007-10-20
| | | | | | | | NAND of > 32MiB in size use 4 bytes in address cycle, not 3. Reported-by: bhsong <bhsong@augustatek.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] Fix typo in Alauda config option help text.Dave Jones2007-10-20
| | | | | | Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NAND] add s3c2440-specific read_buf/write_bufMatt Reimer2007-10-20
| | | | | | | | | | | Add read_buf/write_buf for s3c2440, which can read/write 32 bits at a time rather than just 8. In my testing on an s3c2440a running at 400 MHz with a 100 MHz HCLK, read performance improves by 36% (from 5.19 MB/s to 7.07 MB/s). Signed-off-by: Matt Reimer <mreimer@vpop.net> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [OneNAND] onenand-sim: fix kernel-doc and typosRandy Dunlap2007-10-20
| | | | | | | | Correct kernel-doc notation and descriptions. Correct other typos. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* typo fixesMatt LaPlante2007-10-19
| | | | | | | | | | | | Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* Use helpers to obtain task pid in printksPavel Emelyanov2007-10-19
| | | | | | | | | | | | | | | | The task_struct->pid member is going to be deprecated, so start using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in the kernel. The first thing to start with is the pid, printed to dmesg - in this case we may safely use task_pid_nr(). Besides, printks produce more (much more) than a half of all the explicit pid usage. [akpm@linux-foundation.org: git-drm went and changed lots of stuff] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Add missing newlines to some uses of dev_<level> messagesJoe Perches2007-10-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Slab API: remove useless ctor parameter and reorder parametersChristoph Lameter2007-10-17
| | | | | | | | | | | | | | | | | | | | | Slab constructors currently have a flags parameter that is never used. And the order of the arguments is opposite to other slab functions. The object pointer is placed before the kmem_cache pointer. Convert ctor(void *object, struct kmem_cache *s, unsigned long flags) to ctor(struct kmem_cache *s, void *object) throughout the kernel [akpm@linux-foundation.org: coupla fixes] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Reinstate lost flush_ioremap_region() fix to pxa2xx-flash driverLinus Torvalds2007-10-15
| | | | | | | | | | | | | | | | | | | | | | | | | Commit 90833fdab89da02fc0276224167f0a42e5176f41 ("[ARM] 4554/1: replace consistent_sync() with flush_ioremap_region()") introduced a new "flush_ioremap_region()" function to be used by the MTD mainstone-flash and lubbock-flash drivers to fix a regression from around 2.6.18. Those drivers were independently merged into a single driver by Todd Poynor in commit e644f7d6289456657996df4192de76c5d0a9f9c7 ("[MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driver") Later, those two commits were merged into the main MTD tree by commit b160292cc216a50fd0cd386b0bda2cd48352c73b ("Merge Linux 2.6.23") by David Woodhouse, but in that merge, the fix to use flush_iomap_region() got lost (as it was to files that now no longer existed). This reinstates the fix in the new driver. Noticed-by: Russell King <rmk@arm.linux.org.uk> Tested-and-acked-by: Nicolas Pitre <nico@cam.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* signedness: module_param_array nump argumentAl Viro2007-10-14
| | | | | | | ... should be unsigned int Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'master' of git://git.infradead.org/~dedekind/ubi-2.6David Woodhouse2007-10-14
|\
| * UBI: return correct error codeArtem Bityutskiy2007-10-14
| | | | | | | | | | | | | | | | | | | | Fix the following warning: drivers/mtd/ubi/eba.c: In function 'ubi_eba_init_scan': drivers/mtd/ubi/eba.c:1116: warning: 'err' may be used uninitialized in this function Pointed-to-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
| * UBI: remove useless inlinesArtem Bityutskiy2007-10-14
| | | | | | | | Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
| * UBI: fix atomic LEB change problemsArtem Bityutskiy2007-10-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the UBI device is nearly full, i.e. all LEBs are mapped, we have only one spare LEB left - the one we reserved for WL purposes. Well, I do not count the LEBs which were reserved for bad PEB handling - suppose NOR flash for simplicity. If an "atomic LEB change operation" is run, and the WL unit is moving a LEB, we have no spare LEBs to finish the operation and fail, which is not good. Moreover, if there are 2 or more simultanious "atomic LEB change" requests, only one of them has chances to succeed, the other will fail with -ENOSPC. Not good either. This patch does 2 things: 1. Reserves one PEB for the "atomic LEB change" operation. 2. Serealize the operations so that only on of them may run at a time (by means of a mutex). Pointed-to-by: Brijesh Singh <brijesh.s.singh@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
| * UBI: use byte hexdumpArtem Bityutskiy2007-10-14
| | | | | | | | | | | | More handy since word hexdump prints in host endian. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
| * UBI: do not use vmalloc on I/O pathArtem Bityutskiy2007-10-14
| | | | | | | | | | | | | | | | | | | | | | Similar reason as in case of the previous patch: it causes deadlocks if a filesystem with writeback support works on top of UBI. So pre-allocate needed buffers when attaching MTD device. We also need mutexes to protect the buffers, but they do not cause much contantion because they are used in recovery, torture, and WL copy routines, which are called seldom. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
| * UBI: allocate memory with GFP_NOFSArtem Bityutskiy2007-10-14
| | | | | | | | | | | | | | | | | | | | | | Use GFP_NOFS flag when allocating memory on I/O path, because otherwise we may deadlock the filesystem which works on top of us. We observed the deadlocks with UBIFS. Example: VFS->FS lock a lock->UBI->kmalloc()->VFS writeback->FS locks the same lock again. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
| * UBI: use linux print_hex_dump(), not home-grown oneArtem Bityutskiy2007-10-14
| | | | | | | | Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
| * UBI: don't use array index before testing if it is negativeJesper Juhl2007-10-14
| | | | | | | | | | | | | | | | | | | | | | | | | | I can't find anything guaranteeing that 'ubi_num' cannot be <0 in drivers/mtd/ubi/kapi.c::ubi_open_volume(), and in fact the code even tests for that and errors out if so. Unfortunately the test for "ubi_num < 0" happens after we've already used 'ubi_num' as an array index - bad thing to do if it is negative. This patch moves the test earlier in the function and then moves the indexing using that variable after the check. A bit safer :-) Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
| * UBI: add more printsArtem Bityutskiy2007-10-14
| | | | | | | | | | | | | | I hit those situations and found out lack of print messages. Add more prints when erase problems occur. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
| * UBI: fix sparse warningsArtem Bityutskiy2007-10-14
| | | | | | | | | | | | | | Fix "symbol shadows an earlier one" warnings. Although they are harmless but it does not hurt to fix them and make sparse happy. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
| * UBI: fix leak in ubi_scan_erase_pebFlorin Malita2007-10-14
| | | | | | | | | | | | | | | | | | | | Coverity (1769) found the following problem: if the erase counter overflow check triggers, ec_hdr is leaked. Moving the allocation after the overflow check should take care of it. Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* | [MTD] fix mtdconcat for subpage-write NANDChris Paulson-Ellis2007-10-14
| | | | | | | | | | | | | | | | This allows the mtdconcat driver to work with NAND flash devices that support sub-page writes. Signed-off-by: Chris Paulson-Ellis <chris@edesix.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [MTD] [OneNAND] Avoid deadlock in erase callback; release chip lock first.Adrian Hunter2007-10-14
| | | | | | | | | | | | | | | | | | | | | | When the erase callback performs some other action on the flash, it's highly likely to deadlock unless we actually release the chip lock before calling it. This patch mirrors that same change already done for NAND. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [MTD] [OneNAND] Return only negative error codesAdrian Hunter2007-10-14
| | | | | | | | | | | | | | | | | | The OneNAND driver was confusing JFFS2 by returning positive error codes. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [MTD] [OneNAND] Synchronize block locking operationsAdrian Hunter2007-10-14
| | | | | | | | | | | | | | | | | | Ensure OneNAND's block locking operations are synchronized like all other operations. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | Merge branch 'master' of ↵David Woodhouse2007-10-13
|\ \ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
| * | [POWERPC] Cleanups for physmap_of.c (v2)David Gibson2007-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch includes a whole batch of smallish cleanups for drivers/mtd/physmap_of.c. - A bunch of uneeded #includes are removed - We switch to the modern linux/of.h etc. in place of asm/prom.h - Use some helper macros to avoid some ugly inline #ifdefs - A few lines of unreachable code are removed - A number of indentation / line-wrapping fixes - More consistent use of kernel idioms such as if (!p) instead of if (p == NULL) - Clarify some printk()s and other informative strings. - parse_obsolete_partitions() now returns 0 if no partition information is found, instead of returning -ENOENT which the caller had to handle specially. - (the big one) Despite the name, this driver really has nothing to do with drivers/mtd/physmap.c. The fact that the flash chips must be physically direct mapped is a constrant, but doesn't really say anything about the actual purpose of this driver, which is to instantiate MTD devices based on information from the device tree. Therefore the physmap name is replaced everywhere within the file with "of_flash". The file itself and the Kconfig option is not renamed for now (so that the diff is actually a diff). That can come later. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * | [POWERPC] Make partitions optional in physmap_ofJosh Boyer2007-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The latest physmap_of driver has a small error where it will fail the probe with: physmap-flash: probe of fff00000.small-flas failed with error -2 if there are no partition subnodes in the device tree and the old style binding is not used. Since partition definitions are optional, the probe should still succeed. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
| * | Merge branch 'linux-2.6'Paul Mackerras2007-09-19
| |\|
| * | [POWERPC] Document and implement an improved flash device binding for powerpcDavid Gibson2007-09-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This replaces the binding for flash chips in booting-without-of.txt with an clarified and improved version. It also makes drivers/mtd/maps/physmap_of.c recognize this new binding. Finally it revises the Ebony device tree source to use the new binding as an example. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | Merge branch 'linux-2.6' into for-2.6.24Paul Mackerras2007-09-13
| |\ \
| * | | [POWERPC] Fixes to allow use of Ebony's flash chips through physmap_ofDavid Gibson2007-08-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch contains a handful of small fixes to allow the Ebony's flash to be exposed as MTD devices via the physmap_of driver. Specifically it: - Makes a small addition to the device tree and zImage wrapper to record the correct address for the flash in the device tree based on the board switches as reported via an FPGA register. - Prohibits building the old hard-coded "Ebony" flash map on arch/powerpc kernels, in favour of using physmap_of's device tree based approach. - Enables MTD and physmap_of in the Ebony defconfig. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | | | Merge Linux 2.6.23David Woodhouse2007-10-13
|\ \ \ \ | | |_|/ | |/| |
| * | | pci: fix unterminated pci_device_id listsKees Cook2007-09-19
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a couple drivers that do not correctly terminate their pci_device_id lists. This results in garbage being spewed into modules.pcimap when the module happens to not have 28 NULL bytes following the table, and/or the last PCI ID is actually truncated from the table when calculating the modules.alias PCI aliases, cause those unfortunate device IDs to not auto-load. Signed-off-by: Kees Cook <kees@ubuntu.com> Acked-by: Corey Minyard <minyard@acm.org> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | [MTD] Initialise s_flags in get_sb_mtd_aux()David Howells2007-09-02
| | | | | | | | | | | | | | | | | | | | | Initialise s_flags in get_sb_mtd_aux() from the flags parameter. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
| * | [ARM] 4554/1: replace consistent_sync() with flush_ioremap_region()Jared Hulbert2007-08-23
| |/ | | | | | | | | | | | | | | | | | | This fixes a regression from around 2.6.18, consistent_sync() will now BUG() under these circumstances. The use of consistent_sync() was a hack, replacing it's usage here with a new function, flush_ioremap_region(). Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [MTD] [NAND] Blackfin on-chip NAND Flash Controller driverBryan Wu2007-10-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the driver for latest Blackfin on-chip nand flash controller - use nand_chip and mtd_info common nand driver interface - provide both PIO and dma operation - compiled with ezkit bf548 configuration - use hardware 1-bit ECC - tested with YAFFS2 and can mount YAFFS2 filesystem as rootfs ChangeLog from try#1 - use hweight32() instead of count_bits() - replace bf54x with bf5xx and BF54X with BF5XX - compare against plat->page_size in 2 cases when enable hardware ECC ChangeLog from try#2 - passed nand_test suites - use cpu_relax() instead of busy wait loop - some coding style issue pointed out by Andrew Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [MTD] [NOR] fix ctrl-alt-del can't reboot for intel flash bugKevin Hao2007-10-13
| | | | | | | | | | | | | | | | | | | | | | | | When we press ctrl-alt-del,kernel_restart_prepare will invoke cfi_intelext_reboot which will set flash to read array mode, but later when device_shutdown is invoked which may put current work queue to sleep and other process may be scheduled to running and programming flash in not FL_READY mode again. So we can't boot up if this flash is used for bootloader. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [MTD] [NAND] Fix compiler warning in Alauda driverakpm@linux-foundation.org2007-10-13
| | | | | | | | | | | | | | | | drivers/mtd/nand/alauda.c: In function 'alauda_bounce_read': drivers/mtd/nand/alauda.c:412: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [MTD] [OneNAND] Fix typo related with recent commitKyungmin Park2007-10-13
| | | | | | | | | | Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [MTD] [NAND] Avoid deadlock in erase callback; release chip lock first.David Woodhouse2007-10-06
| | | | | | | | | | | | | | | | When the erase callback performs some other action on the flash, it's highly likely to deadlock unless we actually release the chip lock before calling it. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [MTD] [NAND] Resume method for CAFÉ NAND controllerDavid Woodhouse2007-10-06
| | | | | | | | | | | | | | Originally from Marcelo; modified to put the original timing registers back instead of 0xFFFFFFFF. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [MTD] [NAND] Fix PCI ident table for CAFÉ NAND controller.David Woodhouse2007-10-06
| | | | | | | | | | | | | | | | | | | | It was only the very early prototypes which made the mistake of using the same device ident for all three functions on the device -- don't bother trying to express that in the PCI match table, since the tools don't cope. We can check in the probe routine instead, just in case. Also remember to terminate the table. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-17 18:11:15 -0500