aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc
Commit message (Collapse)AuthorAge
* tifm_sd: DATA_CARRY is not boolean in tifm_sd_transfer_data()Roel Kluin2008-03-15
| | | | | | | | DATA_CARRY is not boolean Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mmc: extend ricoh_mmc to support Ricoh RL5c476Frank Seidel2008-02-08
| | | | | | | | | This patch adds support for the Ricoh RL5c476 chip: with this the mmc adapter that needs this disabler (R5C843) can also be handled correctly when it sits on a RL5c476. Signed-off-by: Frank Seidel <fseidel@suse.de> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* at91_mci: use generic GPIO callsDavid Brownell2008-02-08
| | | | | | | | | | | | | | | | | | | Update the AT91 MMC driver to use the generic GPIO calls instead of the AT91-specific calls; and to request (and release) those GPIO signals. That required updating the probe() fault cleanup codepaths. Now there is a single sequence for freeing resources, in reverse order of their allocation. Also that code uses use dev_*() for messaging, and has less abuse of KERN_ERR. Likewise with updating remove() cleanup. This had to free the GPIOs, and while adding that code I noticed and fixed two other problems: it was poking at a workqueue owned by the mmc core; and in one (rare) case would try freeing an IRQ that it didn't allocate. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* sdhci: add num index for multi controllers caseFeng Tang2008-02-08
| | | | | | | | Some devices have several controllers; need add the index info to device slot name host->slot_desc[] Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* mmc: remove sdhci and mmc_spi experimental markersPierre Ossman2008-02-08
| | | | | | | | Both of these drivers work well (although some hardware still has its problems) and are not in the "alpha" quality that EXPERIMENTAL suggests. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* mmc: Handle suspend/resume in Ricoh MMC disablerPhilip Langdale2008-02-08
| | | | | | | | | | As pci config space is reinitialised on a suspend/resume cycle, the disabler needs to work its magic at resume time. For symmetry this change also explicitly enables the controller at suspend time but it's not strictly necessary. Signed-off-by: Philipl Langdale <philipl@overt.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* Merge branch 'blk-end-request' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2008-01-28
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'blk-end-request' of git://git.kernel.dk/linux-2.6-block: (30 commits) blk_end_request: changing xsysace (take 4) blk_end_request: changing ub (take 4) blk_end_request: cleanup of request completion (take 4) blk_end_request: cleanup 'uptodate' related code (take 4) blk_end_request: remove/unexport end_that_request_* (take 4) blk_end_request: changing scsi (take 4) blk_end_request: add bidi completion interface (take 4) blk_end_request: changing ide-cd (take 4) blk_end_request: add callback feature (take 4) blk_end_request: changing ide normal caller (take 4) blk_end_request: changing cpqarray (take 4) blk_end_request: changing cciss (take 4) blk_end_request: changing ide-scsi (take 4) blk_end_request: changing s390 (take 4) blk_end_request: changing mmc (take 4) blk_end_request: changing i2o_block (take 4) blk_end_request: changing viocd (take 4) blk_end_request: changing xen-blkfront (take 4) blk_end_request: changing viodasd (take 4) blk_end_request: changing sx8 (take 4) ...
| * blk_end_request: changing mmc (take 4)Kiyoshi Ueda2008-01-28
| | | | | | | | | | | | | | | | | | | | This patch converts mmc to use blk_end_request interfaces. Related 'uptodate' arguments are converted to 'error'. Cc: Pierre Ossman <drzeus-mmc@drzeus.cx> Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | Merge branch 'pxa-plat' into develRussell King2008-01-28
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pxa-plat: (53 commits) [ARM] 4762/1: Basic support for Toradex Colibri module [ARM] pxa: fix mci_init functions returning -1 [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270 [ARM] 4746/1: pcm027: network support for phyCORE-PXA270 [ARM] 4745/1: pcm027: default configuration [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module [NET] smc91x: Make smc91x use IRQ resource trigger flags [ARM] pxa: add default config for littleton [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform) [ARM] 4664/1: Add basic support for HTC Magician PDA phones [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. [ARM] pxa: skip registers saving/restoring if entering standby mode [ARM] pxa: fix PXA27x resume [ARM] pxa: Avoid fiddling with CKEN register on suspend [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme [ARM] pxa: Add zylonite MFP wakeup configurations [ARM] pxa: program MFPs for low power mode when suspending [ARM] pxa: make MFP configuration processor independent [ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions ... Conflicts: arch/arm/mach-pxa/ssp.c Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] pxa: mmc: add 1st host controller support for pxa3xxBridge Wu2008-01-26
| | | | | | | | | | | | | | | | | | | | | | This patchis to add the first mmc controller support for pxa3xx. It's valid for pxa3[0|1|2]0. On zylonite, the first controller supports two slots, this patch only support the first one right now. Signed-off-by: Bridge Wu <bridge.wu@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 4711/1: pxa: mmc: move DMA specific code to platform layerBridge Wu2008-01-26
| | | | | | | | | | | | | | | | | | | | | | This patch is to move pxamci DMA specific code to corresponding platform layer because using DRCMRRXMMC/DRCMRTXMMC in pxamci.c makes the driver code dedicated to platform which is not extensible. It is applicable to all pxa platforms. Signed-off-by: Bridge Wu <bridge.wu@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 4709/1: pxa: mmc: add 26MHz support for pxa3[0|1]0 mmc controllerBridge Wu2008-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pxa3[0|1]0 mmc controller can support 26MHz clock mode, they support SD spec 1.1 and MMC spec 4.0 which specify high speed mode. So host caps will include MMC_CAP_MMC_HIGHSPEED and MMC_CAP_SD_HIGHSPEED for pxa3[0|1]0. This patch is to add 26MHz support for them. pxa host clock will be set to 26MHz mode when the card supported max clock rate is higher than or equal to 26MHz. Signed-off-by: Bridge Wu <bridge.wu@marvell.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | i2c/tps65010: move header to <linux/i2c/...>David Brownell2008-01-27
|/ | | | | | | | | Move the tps65010 header file from the OMAP arch directory to the more generic <linux/i2c/...> directory, and remove the spurious dependency of this driver on OMAP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* sdhci: support JMicron JMB38x chipsPierre Ossman2007-12-12
| | | | | | | | The JMicron JMB38x chip doesn't support transfers that aren't 32-bit aligned (both size and start address). It also doesn't like switching between PIO and DMA mode, so it needs to be reset after each request. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* sdhci: use PIO when DMA can't satisfy the requestPierre Ossman2007-12-12
| | | | | | | | | | | Some controllers have been designed on the assumption that all transfers will be 32-bit aligned, both in start address and in size. This is not a guarantee the SDHCI specification provides and not one we can provide. Revert back to PIO for individual requests in order to work around the hardware bug. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* sdhci: don't warn about sdhci 2.0 controllersPierre Ossman2007-12-12
| | | | | | | We support 2.0 controllers, even though we don't use anything in the new feature set. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* sdhci: describe quirksPierre Ossman2007-12-12
| | | | | | Add a comment for each quirk to describe what it does and why. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* spi: use simplified spi_sync() calling conventionMarc Pignat2007-12-05
| | | | | | | | | | | Given the patch which simplifies the spi_sync calling convention, this one updates the callers of that routine which tried using it according to the previous specification. (Most didn't.) Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sdio_uart: fix sign of paramter status in sdio_uart_receive_chars()Andre Haupt2007-11-29
| | | | | | | | | This also fixes a sparse warning about different signedness. Only compile tested, because i do not have the hardware. Signed-off-by: Andre Haupt <andre@bitwigglers.org> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* mmc: Add missing sg_init_table() callHaavard Skinnemoen2007-11-27
| | | | | | | | | mmc_init_queue only initializes the scatterlists with sg_init_table() when using a bounce buffer. This leads to a BUG() when CONFIG_DEBUG_SG is set. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* mmc: Avoid re-using minor numbers before the original device is closed.David Woodhouse2007-11-21
| | | | | | | | | Move the code which marks the minor number as free to mmc_blk_put() so that it happens on the final close() (or removal), instead of doing it at removal even when the device is still logically open. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* tifm_sd: handle non-power-of-2 block sizesAlex Dubov2007-11-21
| | | | | | | | | | It is possible to handle arbitrary block sizes with tifm card reader by conditionally switching to PIO in case such block has to be delivered. At the beginning of each request, DMA is either disabled (non-power-of-2 block size) or set to load time user preference. Signed-off-by: Alex Dubov <oakad@yahoo.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* mmc_block: check card state after writePierre Ossman2007-11-21
| | | | | | | Some cards have been reported to signal that they're ready prematurely. Checking both the busy bit and card state solves the issue. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* Add missing "\n" to log messageRolf Eike Beer2007-11-10
| | | | | Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* mmc: Fix sg helper copy-and-paste errorRoland Dreier2007-11-08
| | | | | | | | | | | | | | | Commit 45711f1a ("[SG] Update drivers to use sg helpers") had the following bogus change in drivers/mmc/card/queue.c: > - src_buf = page_address(src->page) + src->offset; > + src_buf = sg_virt(dst); (Notice that "src" is converted to "dst"). Turn this "dst" back into the intended "src". Signed-off-by: Roland Dreier <roland@digitalvampire.org> Tested-by: Romano Giannetti <romano.giannetti@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* cleanup asm/scatterlist.h includesAdrian Bunk2007-11-02
| | | | | | | | | | | Not architecture specific code should not #include <asm/scatterlist.h>. This patch therefore either replaces them with #include <linux/scatterlist.h> or simply removes them if they were unused. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [ARM] Fix pxamci regressionRussell King2007-10-31
| | | | | | | | | | | | | | | | Fix: WARNING: at arch/arm/mach-pxa/clock.c:69 clk_disable() [<c002d7c8>] (dump_stack+0x0/0x14) from [<c00334f4>] (clk_disable+0x34/0xa0) [<c00334c0>] (clk_disable+0x0/0xa0) from [<c028a43c>] (pxamci_set_ios+0x74/0xf0) [<c028a3c8>] (pxamci_set_ios+0x0/0xf0) from [<c0281548>] (mmc_power_off+0x90/0x9c) [<c02814b8>] (mmc_power_off+0x0/0x9c) from [<c0281a30>] (mmc_start_host+0x18/0x28) [<c0281a18>] (mmc_start_host+0x0/0x28) from [<c02825a0>] (mmc_add_host+0xe8/0x104) [<c02824b8>] (mmc_add_host+0x0/0x104) from [<c028a7d0>] (pxamci_probe+0x24c/0x2f4) [<c028a584>] (pxamci_probe+0x0/0x2f4) from [<c01e5948>] (platform_drv_probe+0x20/0x24) ... Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Correction of "Update drivers to use sg helpers" patch for IMXMMC driverPavel Pisa2007-10-29
| | | | | | | | | | | | The previous change omits "data->" prefix in the "data->sg" case. This change fixes kernel compilation. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> drivers/mmc/host/imxmmc.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
* scatterlist fallout: mmcAl Viro2007-10-28
| | | | | | | | #include <scatterlist/scatterlist.h> is an odd thing to do... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mmc_spi: Fix mmc-over-spi regressionDavid Brownell2007-10-27
| | | | | | | | | | | | Patch 49dce689ad4ef0fd1f970ef762168e4bd46f69a3 changed the sysfs data structures for SPI in a way which broke the MMC-over-SPI host driver. This patch fixes that regression by changing the scheme used to keep from knowingly trying to use a shared bus segment, and updates the adjacent comments slightly to better explain the issue. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* mmc: use common byte swap macrosPierre Ossman2007-10-27
| | | | | | Use the more generic byte swapping macros instead of the socket variants. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* mmc: fix cid and csd byte orderPierre Ossman2007-10-27
| | | | | | | | MMC over SPI sends the CID and CSD registers as data, not responses, which means that the host driver won't do the necessary byte flipping for us. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* at91_mci: Fix bad referencePierre Ossman2007-10-27
| | | | | | | The flags parameter got removed in a previous commit, but some references were overlooked. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* mmc: sg falloutJens Axboe2007-10-24
| | | | | | | Do a full scan of the directory to try and be a bit more proactive, instead of waiting for things to break. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [PATCH] Fix breakage after SG cleanupsRalf Baechle2007-10-23
| | | | | | | | | | | | | | | | | | | | | | Commits 58b053e4ce9d2fc3023645c1b96e537c72aa8d9a ("Update arch/ to use sg helpers") 45711f1af6eff1a6d010703b4862e0d2b9afd056 ("[SG] Update drivers to use sg helpers") fa05f1286be25a8ce915c5dd492aea61126b3f33 ("Update net/ to use sg helpers") converted many files to use the scatter gather helpers without ensuring that the necessary headerfile <linux/scatterlist> is included. This happened to work for ia64, powerpc, sparc64 and x86 because they happened to drag in that file via their <asm/dma-mapping.h>. On most of the others this probably broke. Instead of increasing the header file spider web I choose to include <linux/scatterlist.h> directly into the affectes files. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mmc: fix sg->page falloutEmil Medve2007-10-23
| | | | | Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [SG] Update drivers to use sg helpersJens Axboe2007-10-22
| | | | Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* mmc: at91_mci: cleanup: use MCI_ERRORSAndrew Victor2007-10-17
| | | | | | | | | | | A small MMC driver cleanup. Use the defined AT91_MCI_ERRORS in at91_mci_completed_command() instead of specifying all the error bits individually. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* mmc: possible leak in mmc_read_ext_csdFlorin Malita2007-10-17
| | | | | | | | | | The exception path associated with an invalid ext_csd_struct returns without freeing ext_csd. Coverity CID 1909. Signed-off-by: Florin Malita Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* missing include in mmcAl Viro2007-10-16
| | | | | | | AFAICS, fallout from repacing include of blkdev.h with include of bio.h. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds2007-10-16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: (63 commits) Fix memory leak in dm-crypt SPARC64: sg chaining support SPARC: sg chaining support PPC: sg chaining support PS3: sg chaining support IA64: sg chaining support x86-64: enable sg chaining x86-64: update pci-gart iommu to sg helpers x86-64: update nommu to sg helpers x86-64: update calgary iommu to sg helpers swiotlb: sg chaining support i386: enable sg chaining i386 dma_map_sg: convert to using sg helpers mmc: need to zero sglist on init Panic in blk_rq_map_sg() from CCISS driver remove sglist_len remove blk_queue_max_phys_segments in libata revert sg segment size ifdefs Fixup u14-34f ENABLE_SG_CHAINING qla1280: enable use_sg_chaining option ...
| * mmc: need to zero sglist on initJens Axboe2007-10-16
| | | | | | | | | | | | | | | | Otherwise we could have junk in the sg fields, fooling the sg chaining into thinking ->page is valid. Acked-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | spi doesn't need class_deviceTony Jones2007-10-16
|/ | | | | | | | | | | | Make the SPI framework and drivers stop using class_device. Update docs accordingly ... highlighting just which sysfs paths should be "safe"/stable. Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2007-10-15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits) [ARM] 4578/1: CM-x270: PCMCIA support [ARM] 4577/1: ITE 8152 PCI bridge support [ARM] 4576/1: CM-X270 machine support [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put() [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c [ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols [ARM] pxa: PXA3xx base support [NET] smc91x: fix PXA DMA support code [SERIAL] Fix console initialisation ordering [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile [ARM] Update arch/arm/Kconfig for drivers/Kconfig changes [ARM] 4600/1: fix kernel build failure with build-id-supporting binutils [ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23) [ARM] Rename consistent_sync() as dma_cache_maint() [ARM] 4572/1: ep93xx: add cirrus logic edb9307 support [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32 [ARM] 4594/1: ns9xxx: use the new gpio functions [ARM] 4593/1: ns9xxx: implement generic clockevents ...
| * [ARM] pxa: update PXA MMC interface driver to use clk supportRussell King2007-10-12
| | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Fix compile while compiling drivers/mmc/host/mmc_spi.o with !BLOCKDavid Brownell2007-10-14
| | | | | | | | | | | | | | | | | | | | | | | | | | Make sure the mmc_spi driver can build without CONFIG_BLOCK. Issue noted by "Avuton Olrich" <avuton@gmail.com> and randconfig. While that won't be a common configuration, sometimes embedded boards use SDIO to interface WLAN or Bluetooth chips (vs some parallel interface), and don't provide an MMC/SD socket for use with flash memory cards. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | uevent environment changes falloutAl Viro2007-10-14
| | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds2007-10-12
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (75 commits) PM: merge device power-management source files sysfs: add copyrights kobject: update the copyrights kset: add some kerneldoc to help describe what these strange things are Driver core: rename ktype_edd and ktype_efivar Driver core: rename ktype_driver Driver core: rename ktype_device Driver core: rename ktype_class driver core: remove subsystem_init() sysfs: move sysfs file poll implementation to sysfs_open_dirent sysfs: implement sysfs_open_dirent sysfs: move sysfs_dirent->s_children into sysfs_dirent->s_dir sysfs: make sysfs_root a regular directory dirent sysfs: open code sysfs_attach_dentry() sysfs: make s_elem an anonymous union sysfs: make bin attr open get active reference of parent too sysfs: kill unnecessary NULL pointer check in sysfs_release() sysfs: kill unnecessary sysfs_get() in open paths sysfs: reposition sysfs_dirent->s_mode. sysfs: kill sysfs_update_file() ...
| * | Driver core: change add_uevent_var to use a structKay Sievers2007-10-12
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* / mmc: use correct unregister function for led triggerPierre Ossman2007-10-12
|/ | | | | | | | | We register a simple trigger so make sure we use the corresponding unregister function. (Also means we get a dummy function when triggers aren't compiled in) Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-24 16:14:20 -0500