aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc
Commit message (Collapse)AuthorAge
* Merge branch 'master' of ../mmcPierre Ossman2008-12-31
|\
| * mmc: warn about voltage mismatchesDavid Brownell2008-12-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Get rid of a silent failure mode when the MMC/SD host doesn't support the voltages needed to operate a given card, by adding a warning. A 3.3V host and a 3.0V card, for example, no longer need to mysteriously just not work at all. This isn't the best diagnostic; ideally it would also tell what voltage the card and host support (and not just by dumping the bitmasks). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * mmc_spi: Add support for OpenFirmware bindingsAnton Vorontsov2008-12-31
| | | | | | | | | | | | | | | | | | | | The support is implemented via platform data accessors, new module (of_mmc_spi) will be created automatically when the driver compiles on OpenFirmware platforms. Link-time dependency will load the module automatically. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * pxamci: fix dma_unmap_sg lengthVernon Sauder2008-12-31
| | | | | | | | | | | | | | | | dma_unmap_sg should be given the same length as dma_map_sg, not the value returned from dma_map_sg Signed-off-by: Vernon Sauder <vsauder@inhand.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * mmc_block: ensure all sectors that do not have errors are readAdrian Hunter2008-12-31
| | | | | | | | | | | | | | | | | | | | If a card encounters an ECC error while reading a sector it will timeout. Instead of reporting the entire I/O request as having an error, redo the I/O one sector at a time so that all readable sectors are provided to the upper layers. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * drivers/mmc: Move a dereference below a NULL testJulia Lawall2008-12-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In each case, if the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * sdhci: handle built-in sdhci with modular leds classPierre Ossman2008-12-31
| | | | | | | | | | | | | | | | As reported by Randy Dunlap, having sdhci built-in and LEDs class as a module resulted in undefined symbols. Change the code to handle that case properly (by not having LEDs class support in sdhci). Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * mmc: balanc pci_iomap with pci_iounmapRoel Kluin2008-12-31
| | | | | | | | | | | | | | balance pci_iomap with pci_iounmap, not iounmap Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * mmc_block: print better error messagesAdrian Hunter2008-12-31
| | | | | | | | | | | | | | | | Add command response and card status to error messages. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * mmc: Add mmc_vddrange_to_ocrmask() helper functionAnton Vorontsov2008-12-31
| | | | | | | | | | | | | | | | This function sets the OCR mask bits according to provided voltage ranges. Will be used by the mmc_spi OpenFirmware bindings. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * ricoh_mmc: Handle newer models of Ricoh controllersphilipl@overt.org2008-12-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The latest generation of laptops are shipping with a newer model of Ricoh chip where the firewire controller is the primary PCI function but a cardbus controller is also present. The existing code assumes that if a cardbus controller is, present, then it must be the one to manipulate - but the real rule is that you manipulate PCI function 0. This patch adds an additional constraint that the target must be function 0. Signed-off-by: Philip Langdale <philipl@overt.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * mmc: Add 8-bit bus width supportJarkko Lavinen2008-12-31
| | | | | | | | | | Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * sdhci: activate led support also when moduleÉric Piel2008-12-31
| | | | | | | | | | | | | | | | | | CONFIG_LEDS_CLASS is defined only if led-class is built-in, otherwise when it is a module the option is called CONFIG_LEDS_CLASS_MODULE. Led support should also be activated in this case. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * mmc: trivial annotation of 'blocks'Harvey Harrison2008-12-31
| | | | | | | | | | | | | | sg_init_one is reading a be32, annotate as such. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * pci: use pci_ioremap_bar() in drivers/mmcArjan van de Ven2008-12-31
| | | | | | | | | | | | | | | | | | | | Use the new pci_ioremap_bar() function in drivers/mmc. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * Merge branch 'rmk-devel-mxc-pu-v2' of ↵Russell King2008-12-17
| |\ | | | | | | | | | git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6 into devel
| | * imxmmc: use readl/writelMarc Kleine-Budde2008-12-16
| | | | | | | | | | | | | | | | | | | | | Use readl/writel instead of direct pointer deref. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * imxmmc: Remove unused variablesMarc Kleine-Budde2008-12-16
| | | | | | | | | | | | | | | | | | | | | | | | This removes clkrt and cmdat from struct imxmci_host, they are unused. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * imxmmc: Checkpatch cleanupMarc Kleine-Budde2008-12-16
| | | | | | | | | | | | | | | | | | | | | | | | This cleans up the warnings issued by the checkpatch script and remove the file history from the header Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | Merge branch 'hsmmc-init' of ↵Russell King2008-12-17
| |\ \ | | |/ | |/| | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
| | * omap mmc: Add low-level initialization for hsmmc controllerTony Lindgren2008-12-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add low-level initialization for hsmmc controller. Merged into this patch patch are various improvments and board support by Grazvydas Ignotas and David Brownell. Also change wire4 to be wires, as some newer controllers support 8 data lines. Cc: Pierre Ossman <drzeus-mmc@drzeus.cx> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * omap mmc: Add better MMC low-level initTony Lindgren2008-12-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This will simplify the MMC low-level init, and make it more flexible to add support for a newer MMC controller in the following patches. The patch rearranges platform data and gets rid of slot vs controller confusion in the old data structures. Also fix device id numbering in the clock code. Some code snippets are based on an earlier patch by Russell King <linux@arm.linux.org.uk>. Cc: Pierre Ossman <drzeus-mmc@drzeus.cx> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | Merge branch 'clks' into develRussell King2008-11-30
| |\ \
| | * | [ARM] amba drivers: don't pass a consumer clock name for devices with unique ↵Russell King2008-11-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clocks Where devices only have one consumer, passing a consumer clock ID has no real benefit, and it only encourages wrong implementations of the clk API. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | Merge branch 's3c-moves2' of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King2008-11-29
| |\ \ \
| | * \ \ Merge branch 'master' of ↵Ben Dooks2008-11-03
| | |\ \ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into s3c-moves2
| | * | | | [ARM] S3C24XX: Move mci.h to arch/arm/plat-s3c24xx/include/platBen Dooks2008-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move mci.h to new position in arch/arm/plat-s3c24xx/include/plat ready to clean out old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| * | | | | [ARM] Hide ISA DMA API when ISA_DMA_API is unsetRussell King2008-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When ISA_DMA_API is unset, we're not implementing the ISA DMA API, so there's no point in publishing the prototypes via asm/dma.h, nor including the machine dependent parts of that API. This allows us to remove a lot of mach/dma.h files which don't contain any useful code. Unfortunately though, some platforms put their own private non-ISA definitions into mach/dma.h, so we leave these behind and fix the appropriate #include statments. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | [ARM] pxa: avoid polluting the kernel's namespaceRussell King2008-11-28
| | |_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid unnecessarily pollution of the kernel's namespace by avoiding mach/hardware.h. Include this header file where necessary. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | [ARM] pxa: don't pass a consumer clock name for devices with unique clocksRussell King2008-11-27
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | Where devices only have one consumer, passing a consumer clock ID has no real benefit. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | sdricoh_cs: Add support for Bay Controller devicesSascha Sommer2008-11-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some Ricoh SD card readers seems to advertise themselves slightly differently. This patches the driver to will recognise an additional product id, and it appears to work perfectly. % pccardctl info PRODID_1="RICOH" PRODID_2="Bay Controller" PRODID_3="" PRODID_4="" MANFID=0000,0000 Signed-off-by: Charles Lowe <aquasync@gmail.com> Acked-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* | | | mmc: at91_mci: reorder timer setup and mmc_add_host() callNicolas Ferre2008-11-30
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As said in function comment mmc_add_host() requires that: "The host must be prepared to start servicing requests before this function completes." During this function, at91_mci_request() can be invoqued without timer beeing setup leading to a kernel Oops. This has been reported inserting this driver as a module. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reported-by: Wu Xuan <wux@landicorp.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* | | mmc: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2008-11-08
| | | | | | | | | | | | | | | | | | Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* | | mmc: increase SD write timeout for crappy cardsPierre Ossman2008-11-08
| |/ |/| | | | | | | | | | | | | | | | | | | It seems that some cards are slightly out of spec and occasionally will not be able to complete a write in the alloted 250 ms [1]. Incease the timeout slightly to allow even these cards to function properly. [1] http://lkml.org/lkml/2008/9/23/390 Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* | [ARM] 5322/1: Fix fastpath issue in mmci.cLinus Walleij2008-10-27
|/ | | | | | | | | | | | | Fix fastpath issues Since mmci_request() can be called from a non-interrupt context, and does, during kernel init, causing a host of debug messages during boot if you enable spinlock debugging, we need to use the spinlock calls that save IRQ flags and restore them. Signed-off-by: Linus Walleij <triad@df.lth.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] switch mmcAl Viro2008-10-21
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* [PATCH] beginning of methods conversionAl Viro2008-10-21
| | | | | | | | | | | | | | | | | | | | | | | | To keep the size of changesets sane we split the switch by drivers; to keep the damn thing bisectable we do the following: 1) rename the affected methods, add ones with correct prototypes, make (few) callers handle both. That's this changeset. 2) for each driver convert to new methods. *ALL* drivers are converted in this series. 3) kill the old (renamed) methods. Note that it _is_ a flagday; all in-tree drivers are converted and by the end of this series no trace of old methods remain. The only reason why we do that this way is to keep the damn thing bisectable and allow per-driver debugging if anything goes wrong. New methods: open(bdev, mode) release(disk, mode) ioctl(bdev, mode, cmd, arg) /* Called without BKL */ compat_ioctl(bdev, mode, cmd, arg) locked_ioctl(bdev, mode, cmd, arg) /* Called with BKL, legacy */ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* Merge branch 'for-linus' of ↵Linus Torvalds2008-10-20
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: s3cmci: Add Ben Dooks/Simtec Electronics to header & copyright s3cmci: fix continual accesses to host->pio_ptr s3cmci: Support transfers which are not multiple of 32 bits. s3cmci: cpufreq support s3cmci: Make general protocol errors less noisy mmc_block: tell block layer there is no seek penalty
| * s3cmci: Add Ben Dooks/Simtec Electronics to header & copyrightben@fluff.org.uk2008-10-15
| | | | | | | | | | | | | | | | | | | | | | | | Since the original authour (Thomas Kleffel) has been too busy to merge the s3cmci driver and keep it up to date, I (mostly as part of my role with Simtec Electronics) got the driver to a mergable state and have been maintaining it since I think that I should be added to the header. Also add a copyright statement for the new work. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * s3cmci: fix continual accesses to host->pio_ptrben@fluff.org.uk2008-10-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The s3cmci driver uses the host->pio_ptr field to point to the current position into the buffer for data transfer. During the transfers it does the following: while (fifo_words--) *(host->pio_ptr++) = readl(from_ptr); This is inefficent, as host->pio_ptr is not used in any other part of the transfer but the compiler emits code which does the following: while (fifo_words--) { u32 *ptr = host->pio_ptr; *ptr = readl(from_ptr); ptr++; host->pio_ptr = ptr; } This is obviously a waste of a load and store each time around the loop, which could be up to 16 times depending on how much needs to be transfered. Move the ptr accesses to outside the while loop so that we do not end up reloading/re-writing the pointer. Note, this seems to make the code 16 bytes larger. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * s3cmci: Support transfers which are not multiple of 32 bits.Christer Weinigel2008-10-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To be able to do SDIO the s3cmci driver has to support non-word-sized transfers. Change pio_words into pio_bytes and fix up all the places where it is used. This variant of the patch will not overrun the buffer when reading an odd number of bytes. When writing, this variant will still read past the end of the buffer, but since the driver can't support non-word- aligned transfers anyway, this should not be a problem, since a word-aligned transfer will never cross a page boundary. This has been tested with a CSR SDIO Bluetooth Type A device on a Samsung S3C24A0 processor. Signed-off-by: Christer Weinigel <christer@weinigel.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * s3cmci: cpufreq supportben@fluff.org.uk2008-10-15
| | | | | | | | | | | | | | Support for cpu frequency changing. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * s3cmci: Make general protocol errors less noisyben@fluff.org.uk2008-10-15
| | | | | | | | | | | | | | | | | | | | | | | | General errors, such as timeouts during probe do not need to be sent to the console, so move them down to be included if the debug is enabled. Such errors include: s3c2440-sdi s3c2440-sdi: s3cmci_request: no medium present Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * mmc_block: tell block layer there is no seek penaltyPierre Ossman2008-10-14
| | | | | | | | Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* | Merge branch 'fixes' into for-linusRussell King2008-10-15
|\| | | | | | | | | | | Conflicts: arch/arm/mach-versatile/core.c
| * Merge branch 'master' of ↵David Woodhouse2008-10-13
| |\ | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: include/asm-x86/statfs.h
| | * Merge branch 'for-linus' of ↵Linus Torvalds2008-10-12
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (24 commits) MMC: Use timeout values from CSR MMC: CSD and CID timeout values sdhci: 'scratch' may be used uninitialized mmc: explicitly mention SDIO support in Kconfig mmc: remove redundant "depends on" Fix comment in include/linux/mmc/host.h sdio: high-speed support mmc_block: hard code 512 byte block size sdhci: force high speed capability on some controllers mmc_block: filter out PC requests mmc_block: indicate strict ordering mmc_block: inform block layer about sector count restriction sdio: give sdio irq thread a host specific name sdio: make sleep on error interruptable sdhci: reduce card detection delay sdhci: let the controller wait for busy state to end atmel-mci: Add missing flush_dcache_page() in PIO transfer code atmel-mci: Don't overwrite error bits when NOTBUSY is set atmel-mci: Add experimental DMA support atmel-mci: support multiple mmc slots ...
| | | * Merge branch 'master' of ↵Pierre Ossman2008-10-12
| | | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/atmel-mci-2.6.28 Conflicts: drivers/mmc/host/atmel-mci.c
| | | | * atmel-mci: Add missing flush_dcache_page() in PIO transfer codeHaavard Skinnemoen2008-10-05
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
| | | | * atmel-mci: Don't overwrite error bits when NOTBUSY is setHaavard Skinnemoen2008-10-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After a data error, we wait for the NOTBUSY bit to be set so that we can be sure the data transfer is completely finished. However, when NOTBUSY is set, the interrupt handler copies the contents of SR into data_status, overwriting any error bits we may have detected earlier. To avoid this, initialize data_status to 0 before starting a request, and don't overwrite it unless it still contains 0. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>