aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media
Commit message (Collapse)AuthorAge
* V4L/DVB (5260): Cx88-blackbird: allow usage of both 376836 and 262144 sized ↵Michael Krufky2007-03-03
| | | | | | | | | | | | firmware images This updates the cx88-blackbird driver to be able to use the new cx23416 firmware image released by Hauppauge Computer Works, while retaining compatibility with the older firmware images. cx2341x firmware can be downloaded at: http://dl.ivtvdriver.org/ivtv/firmware/ Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5366): Pvrusb2: Fix compilation warning for amd64 builds (use %zu ↵Mike Isely2007-03-03
| | | | | | | | instead of %u) Signed-off-by Mike Isely <isely@pobox.com> Signed-off-by Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5305): Mark VIDIOC_DBG_S/G_REGISTER as experimentalHans Verkuil2007-03-01
| | | | | | | | Move VIDIOC_DBG_S/G_REGISTER from the internal ioctl list to the public ioctls, but mark it as experimental for now. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5271): Add VIDIOC_TRY_ENCODER_CMD and VIDIOC_ENCODER_CMD ioctls.Hans Verkuil2007-03-01
| | | | | | | | Add support for starting, stopping, pausing and resuming an MPEG (or similar compressed stream) encoder. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5270): Add VIDIOC_G_ENC_INDEX ioctlHans Verkuil2007-03-01
| | | | | | | | The VIDIOC_G_ENC_INDEX ioctl can obtain the MPEG index from an MPEG encoder. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5276): Cxusb: fix firmware patch for big endian systemsJin-Bong lee2007-03-01
| | | | | | | | | Without this patch, the device will not be detected after firmware download on big endian systems. Signed-off-by: Jin-Bong lee <jinbong.lee@samsung.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5258): Cafe_ccic: fix compiler warningJean Delvare2007-03-01
| | | | | | | | | | | Fix the following warning: drivers/media/video/cafe_ccic.c: In function `cafe_vidioc_reqbufs': drivers/media/video/cafe_ccic.c:1197: warning: 'ret' might be used uninitialized in this function Probably not a real bug, but the warning can be avoided easily. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5295): Digitv: open nxt6000 i2c_gate for TDED4 tuner handlingMichael Krufky2007-03-01
| | | | | | | | | | dvb-pll normally opens the i2c gate before attempting to communicate with the pll, but the code for this device is not using dvb-pll. This should be cleaned up in the future, but for now, just open the i2c gate at the appropriate place in order to fix this driver bug. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5304): Improve chip matching in v4l2_registerHans Verkuil2007-03-01
| | | | | | | | | The chip matching in struct v4l2_register for VIDIOC_DBG_G/S_REGISTER was rather primitive. It could not be extended to other busses besides i2c and it lacked a way to. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5255): Fix cx25840 firmware loading.Hans Verkuil2007-03-01
| | | | | | | | | | | Due to changes in the i2c handling in 2.6.20 this cx25840 bug surfaced, causing the firmware load to fail for the ivtv driver. The correct sequence is to first attach the i2c client, then use the client's device to load the firmware. Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5253): Qt1010: whitespace / 80 column cleanupsMichael Krufky2007-02-21
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5252): Qt1010: use ARRAY_SIZE macro when appropriateMichael Krufky2007-02-21
| | | | | | | Use ARRAY_SIZE macro already defined in kernel.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5251): Qt1010: fix compiler warningMarco Schluessler2007-02-21
| | | | | | | | In function 'qt1010_init': Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5249): Fix compiler warning in vivi.cMarcel Siegert2007-02-21
| | | | | | | | The result of copy_to_user was not used, so the compiler complained now a warning will be issued if copy_to_user fails. Signed-off-by: Marcel Siegert <mws@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5247): Stv0297: Enable BER/UNC countingHartmut Birr2007-02-21
| | | | | | | | | Enable BER/UNC counting for the stv0297 frontend. The idea for this patch comes from stv0297_cs.c. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5246): Budget-ci: IR handling fixupsDavid Härdeman2007-02-21
| | | | | | | | | | | | | | | | | | Commit 00c4cc67512ada1d195b8bf3ef1db1d6b3951605 Oliver Endriss changed the budget-ci driver to use interrupt mode for i2c transfers. This also meant that a new bunch of IR bytes that were previously lost are now received, which allowed me to better understand how the MSP430 chip works. Unfortunately it also means that the current driver gets some assumptions wrong and might generate double keypresses for one IR command. The attached patch fixes this by throwing away the repeat bytes and by associating the correct command and device bytes. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5245): Dvb-ttpci: use i2c gate ctrl from stv0297 frontend driverMarco Schluessler2007-02-21
| | | | | | | | Use i2c gate ctrl from stv0297 frontend driver. Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5244): Dvbdev: fix illegal re-usage of fileoperations structMarcel Siegert2007-02-21
| | | | | | | | | | | | | | Arjan van de Ven <arjan@infradead.org> reported an illegal re-usage of the fileoperations struct if more than one dvb device (e.g. frontend) is present. This patch fixes this issue. It allocates a new fileoperations struct each time a device is registered and copies the default template fileops. Signed-off-by: Marcel Siegert <mws@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5178): Avoid race when deregistering the IR control for dvb-usbChris Rankin2007-02-21
| | | | | | | | | | | | | The work item function is dvb_usb_read_remote_control(): INIT_WORK(&d->rc_query_work, dvb_usb_read_remote_control, d); and the last piece of work it does is: schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc_interval)); Hence you need to call "cancel_rearming_delayed_work()" and not "cancel_delayed_work()", correct? I certainly haven't seen this oops reoccur since I applied this patch. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5240): Qt1010: use i2c_gate_ctrl where appropriateAntti Palosaari2007-02-21
| | | | | | | | | | | This patch adds calls to i2c_gate_ctrl in the qt1010 dvb tuner module, while removing the temporary hack in au6610 and gl861. Tested successfully against fi-Oulu frequencies with MSI Megasky 580 GL861 and Sigmatek DVB-110 AU6610. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5239): Whitespace / 80-column cleanupsMichael Krufky2007-02-21
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5238): Kconfig: qt1010 should be selected by gl861 and au6610Michael Krufky2007-02-21
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5237): Dvb: add new qt1010 tuner moduleAntti Palosaari2007-02-21
| | | | | | | | | | | | | | | | | | | | | gl861: (MSI Megasky) - hack for enable ZL10353 / QT1010 I2C gate - use new QT1010 module instead of old code au6610: (Sigmatek DVB-110) - hack for enable ZL10353 / QT1010 I2C gate - use new QT1010 module instead of old code Tested successfully with au6610 and gl861 devices against fi-Yllas frequencies. Now it locks perfectly with both devices. There is a "hack" to enable probable i2c gate in zl10535 demodulator. QT1010 doesn't respond to any i2c messages before we write 0x1a to demodulator register 0x62. In my understanding this should be fixed to demodulator code. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5236): Initial support for Sigmatek DVB-110 DVB-TAntti Palosaari2007-02-21
| | | | | | | | | | | | | | | | | | | | | This patch adds driver for Sigmatek DVB-110 USB DVB-T stick. Stick has based on hardware of Qtuantek QT1010 tuner, Zarlink ZL10353 (Intel CE 6353) demodulator and Alcor Micro AU6610 DVB-T USB controller. HW is rather similar as used in MSI Megasky GL861. Currently, the driver works only in USB 2.0. In my understanding USB 1.1 is also supported by hw but I cannot test it due to lack of USB 1.1 port. Device supports only isochronous mode transfers. There is also eeprom in usb controller(at least in address range 0x80 - 0xbf) for storing data, eg. firmware. Anyway, firmware loading is not used / required by the device. There seems to be at least one unknown I2C device in address 0xa0, probably remote control or GPIO. Windows drivers reads registers from 0x00 to 0x07 from this unknown address. Driver is based on gl861 module. Tuner has a lot of problems to lock with megasky qt1010 module with this hardware with some broadcasting standards. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5235): Gl861: use parallel_tsCarl Lundqvist2007-02-21
| | | | | | | | | - use parallel_ts - Now this driver works. - correct typo in MODULE_VERSION Signed-off-by: Carl Lundqvist <comabug@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5234): Gl861: remove unneeded declarationMichael Krufky2007-02-21
| | | | | | | | | | remove unneeded declaration of .generic_bulk_ctrl_endpoint generic_bulk_ctrl_endpoint isn't being used in this device, so this is not needed here. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5233): Gl861: correct address of the bulk endpointJan Nijs2007-02-21
| | | | | | | | | | | | | The megasky 580 based on gl861 has three endpoints: - 0x81 BULK/ISOC IN MPEG2 TS - 0x83 INT IN remote control receiver - 0x02 BULK OUT bulk control endpoint It doesn't look like the bulk endpoint is used, but better to have the correct one in the config. Signed-off-by: Jan Nijs <jan.nijs@scarlet.be> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5232): Gl861: correct oops when loading moduleJan Nijs2007-02-21
| | | | | | | | | | | This patch moves the DVB_USB_IS_AN_I2C_ADAPTER flag from the adapter properties to the device properties. Without this patch I get an OOPS when the gl861 driver tries to access any registers. Signed-off-by: Jan Nijs <jan.nijs@scarlet.be> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5231): Gl861: whitespace cleanupsMichael Krufky2007-02-21
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5230): Gl861: remove NULL entry from gl861_propertiesMichael Krufky2007-02-21
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5229): Gl861: use qt1010_tuner_attach function from qt1010.hMichael Krufky2007-02-21
| | | | | | | | | The gl861_tuner_attach function is not specific to this device. This patch removes gl861_tuner_attach, and replaces it with qt1010_tuner_attach from the qt1010 header file. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5228): Gl861: remove unneeded "extern int" declarationMichael Krufky2007-02-21
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5227): Gl861: hide disabled code from upstream patch systemMichael Krufky2007-02-21
| | | | | | | enclose disabled code inside an #if 0 block, instead of /* comments */ Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5226): Gl861: fix driver_nameMichael Krufky2007-02-21
| | | | | | | Rename driver_name from "gl861" to "dvb_usb_gl861" Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5225): Gl861: fix MODULE_AUTHORMichael Krufky2007-02-21
| | | | | | | | The author's email address is already in the MODULE_AUTHOR field. This patch adds his name as well. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5224): Gl861: select DVB_ZL10353 if !DVB_FE_CUSTOMISEMichael Krufky2007-02-21
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5223): Rename USB_PID_MSI_MEGASKY55801 to USB_PID_MSI_MEGASKY580_55801Michael Krufky2007-02-21
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5221): Dvb-usb: initial support for MSI Mega Sky 580 DVB-T based on ↵Carl Lundqvist2007-02-21
| | | | | | | | | | | | | | | | | GL861 This patch adds support for MSI Mega Sky 580 / GL861 DVB-T USB2.0 Except for the 2 lines added to zl10353.c, zl10353_reset_attach needs to be changed. If I read the code correctly setting parallel_ts will take care of the 3rd byte, but the 2nd byte needs to be 0x0b instead of 0x03 too. I guess these changes needs to be done only for this device, not sure how to do that. The zl10353 changes have been split apart from this patch, into the next patch, soon to follow. Signed-off-by: Carl Lundqvist <comabug@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5218): Zl10353: register definitions updateChris Pascoe2007-02-21
| | | | | | | | Update the descriptions of "discovered" registers on the zl10353, using the equivalaent mt352 register names. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5217): Zl10353: Implement TRL nominal rate calculationAntti Palosaari2007-02-21
| | | | | | | | | | Implement trl nominal rate calculation to Zarlink ZL10353 demod, based on calculation used in Zarlink MT352. This adds support for 6 and 8MHz bandwidth transponders. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5216): Zl10353: add i2c_gate_ctrl supportAntti Palosaari2007-02-21
| | | | | | | | Implement I2C gate control for Megasky GL861 and SigmaTek AU6610 support. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5215): Experimental support for signal strength/BER/uncorrectable countChris Pascoe2007-02-21
| | | | | | | | | | | After studying many hours worth of register dumps of MT352 and ZL10353 fed with identically damaged RF signals I have made an educated guess at which registers contain the AGC level, bit error rate and uncorrectable error count values. Implement the IOCTLs that return these values to userspace. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5212): Pvrusb2: Be more forgiving about encoder firmware sizeMike Isely2007-02-21
| | | | | | | | | | | The pvrusb2 driver previously rejected encoder firmware whose size was not a multiple of 8192. But this is a false check because it's possible to find cx23416 firmware whose size doesn't conform to this limit. So change the firmware loader implementation to be more forgiving of the image size. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5210): Pvrusb2: Fix printk format typoMike Isely2007-02-21
| | | | | Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5209): Kthread api conversion for dvb_frontend and av7110 fixakpm@linux-foundation.org2007-02-21
| | | | | | | | avoid double-up(), pointed out by Oliver. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5208): Kthread API conversion for dvb_frontend and av7110Herbert Poetzl2007-02-21
| | | | | | | | | | | | | | | dvb kernel_thread to kthread API port. It is running fine here, including module load/unload and software suspend (which doesn't work as expected with or without this patch :). I didn't convert the dvb_ca_en50221 as I do not have such an interface, but if the conversion process is fine with the v4l-dvb maintainers, it should not be a problem to send a patch for that too ... Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5206): Usbvision: set alternate interface modificationThierry MERLE2007-02-21
| | | | | | | | - usb alternate selection modified to get the biggest endpoint packet size. - fix sysfs get values for brightness/contrast/hue/saturation Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5205): Usbvision: dynamic allocation for framesThierry MERLE2007-02-21
| | | | | | | | - fix decoder route output - dynamic frame buffer allocation Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5200): V4l_printk_ioctl_arg() is no longer used.Adrian Bunk2007-02-21
| | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5202): DVB: Use ARRAY_SIZE macro when appropriateAhmed S. Darwish2007-02-21
| | | | | | | | | Use ARRAY_SIZE macro already defined in kernel.h Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-17 20:27:19 -0500