aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/video/cx88/cx88-cards.c
Commit message (Collapse)AuthorAge
* V4L/DVB (13407): Add Prof 7301 PCI DVB-S2 cardIgor M. Liplianin2009-12-05
| | | | | | | | | Add Prof 7301 PCI DVB-S2 card The card based on stv0903 demod, stb6100 tuner. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13238): v4l2_subdev: rename tuner s_standby operation to core s_powerLaurent Pinchart2009-12-05
| | | | | | | | | | | | | | | | | Upcoming I2C v4l2_subdev drivers need a way to control the subdevice power state from the core. This use case is already partially covered by the tuner s_standby operation, but no way to explicitly come back from the standby state is available. Rename the tuner s_standby operation to core s_power, and fix tuner drivers accordingly. The tuner core will call s_power(0) instead of s_standby(). No explicit call to s_power(1) is required for tuners as they are supposed to wake up from standby automatically. [mchehab@redhat.com: CodingStyle fix] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12540): v4l: simplify v4l2_i2c_new_subdev and friendsHans Verkuil2009-09-18
| | | | | | | | | | Rewrite v4l2_i2c_new_subdev as a simplified version of v4l2_i2c_new_subdev_cfg and remove v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr. This simplifies this API substantially. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12486): cx88: fix TBS 8920 card supportIgor M. Liplianin2009-09-12
| | | | | | | | It does matter to set explicitly gpio0 value in cx88_board structure for TBS 8920 card. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12439): cx88: add support for WinFast DTV2000H rev. JVlastimil Labsky2009-09-12
| | | | | | | | | | | | | | | I updated and simplyfied patch from Zbynek Hrabovsky for recent kernel. It enables autodetection of card, sound in analog TV , sound in FM radio and switching between antenna and cable RF input. Radio tuner still doesn't work, I don't even know how it works. Some guys wrote me that FM radio works with TV tuner used instead of radio part (symlink video0 -> radio0). Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Vlastimil Labsky <vlasta.labsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12394): cx88: Disable xc3028 power management for Geniatech x8000Devin Heitmueller2009-08-13
| | | | | | | | | | | | | | | A user discovered that the Geniatech x8000 encountered a regression when the xc3028 power management was introduced. The xc3028 never recovers after setting the powerdown register, which is probably because the xc3028 reset GPIO is not properly configured. Since I do not have access to the hardware and thus cannot determine the correct GPIO configuration, just disable xc3028 power management on this board, which fixes the regression. Thanks to user "ritec" for reporting the issue and testing the fix. Cc: rictec <rictec@netcabo.pt> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12010): cx88: Properly support Leadtek TV2000 XP GlobalMauro Carvalho Chehab2009-06-23
| | | | | | | | | Fix Leadtek TV2000 XP Global entries and add missing PCI ID's. Thanks to Terry Wu <terrywu2009@gmail.com> for pointing us for the proper settings. Cc: Terry Wu <terrywu2009@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11879): Adds support for Leadtek WinFast DTV-1800HMiroslav Sustek2009-06-16
| | | | | | | | | | | Enables analog/digital tv, radio and remote control (gpio). Tested-by: Marcin Wojcikowski <emtees.mts@gmail.com> Tested-by: Karel Juhanak <karel.juhanak@warnet.cz> Tested-by: Andrew Goff <goffa72@gmail.com> Tested-by: Jan Novak <novak-j@seznam.cz> Signed-off-by: Miroslav Sustek <sustmidown@centrum.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11807): cx88: remove xc5000 reset for Pinnacle 800iDevin Heitmueller2009-06-16
| | | | | | | | | | | | | | | | | | | | | | | According to the engineer at PCTV Systems, the xc5000 reset pin is supposed to be on GPIO12. However, despite three nights of effort, pulling that GPIO low didn't reset the xc5000. While pulling MO_SRST_IO low does reset the xc5000, this also resets in the s5h1409 being reset as well. This causes tuning to always fail since the internal state of the s5h1409 does not match the driver's state. Given that the only two conditions in which the driver performs a reset is during firmware load and powering down the chip, I am taking out the reset. We know that the chip is being reset when the cx88 comes online, and not being able to do power management for this board is better than not having any tuning at all. Problem discovered when implementing proper power management for the xc5000, which results in calls to the reset callback *after* s5h1409 is initialized. Cc: Steven Toth <stoth@kernellabs.com> Cc: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11665): cx88: Add support for the Hauppauge IROnly board.Steven Toth2009-06-16
| | | | | | | cx88: Add support for the Hauppauge IROnly board. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11373): v4l2-common: add explicit v4l2_device pointer as first arg ↵Hans Verkuil2009-04-06
| | | | | | | | | | | | to new_(probed)_subdev The functions v4l2_i2c_new_subdev and v4l2_i2c_new_probed_subdev relied on i2c_get_adapdata to return the v4l2_device. However, this is not always possible on embedded platforms. So modify the API to pass the v4l2_device pointer explicitly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11368): v4l2-subdev: move s_standby from core to tuner.Hans Verkuil2009-04-06
| | | | | | | | s_standby is only used to put the tuner in powersaving mode, so move it from core to tuner. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11305): cx88: prevent probing rtc and ir devicesHans Verkuil2009-03-30
| | | | | | | | | | | | | | | | | tuner-core.c contains a hack for cx88 board to prevent probing of certain addresses: /* HACK: Ignore 0x6b and 0x6f on cx88 boards. * FusionHDTV5 RT Gold has an ir receiver at 0x6b * and an RTC at 0x6f which can get corrupted if probed. */ With the new i2c API this hack no longer works. So instead change the list of tuner probe addresses in the cx88 driver itself, which is much more clean. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11300): cx88: convert to v4l2_subdev.Hans Verkuil2009-03-30
| | | | | | | | | | | | Convert cx88 to use v4l2_subdev since the old i2c autoprobing mechanism will be removed. Added code to explicitly load tvaudio where needed. Also fix the rtc-isl1208 support: since that driver no longer supports autoprobing it has to be loaded using the new i2c API. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11243): cx88: Missing failure checksAlan Cox2009-03-30
| | | | | | | | | | | The ioremap one was reported in October 2007 (Bug 9146), the kmalloc one was blindingly obvious while looking at the ioremap one The bug suggests some other configuration for lots of I/O memory (32MB per device is ioremapped) but I'll leave that to the real maintainers Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11047): cx88: convert to v4l2_device.Hans Verkuil2009-03-30
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (10949): Add support for Terratec Cinergy HT PCI MKIIStephan Wienczny2009-03-30
| | | | | | | | | This patch adds support for Terratec Cinergy HT PCI MKII with card id 79. Its more or less a copy of Pinnacle Hybrid PCTV. Thanks to k1ngf1sher on forum.ubuntuusers.de for the idea to copy that card. Signed-off-by: Stephan Wienczny <stephan@wienczny.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9536): WinFast DTV2000 H: add support for missing analog inputsVincent Pelletier2008-12-29
| | | | | | | | | | | | Add support for the following inputs: - radio tuner - composite 1 & 2 (only 1 is physically available, but composite 2 is also advertised by windows driver) - svideo Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9534): cx88: Add support for Prof 6200 DVB-S PCI cardIgor M. Liplianin2008-12-29
| | | | | | | The card based on stv0299 or stv0288 demodulators. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI cardIgor M. Liplianin2008-12-29
| | | | | | | The card based on stv0299 or stv0288 demodulators. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9529): cx88: add a second PCI ID for ATI TV Wonder ProPatrice Levesque2008-12-29
| | | | | | | | | | There's a second PCI identifier for the ATI TV WONDER PRO card (0x1002:0x00f9). Attached is a patch to kernel 2.6.27 that adds autodetection for this version. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9333): cx88: Not all boards that requires cx88-mpeg has frontendsMauro Carvalho Chehab2008-10-21
| | | | | | | | | | | The multifrontend changes on cx88 assumed that all boards that use cx88-mpeg supports DVB. This is not true. There also a few analog-only boards based on Blackboard design that also uses cx88-mpeg. For those boards, there's no need to allocate dvb frontends. This patch fixes videobuf allocation for those devices. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9267): cx88: Update of audio routing config for FM radioDarron Broad2008-10-17
| | | | | | | | | | | | This adds audio routing for the hvr-1300/3000/4000 cards enabling FM audio for the I2S ADC method of the cx88. At this time only the HVR-4000 has been tested. It is assumed the HVR-3000/1300 are the same. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9229): cx88: Add intial config for FM radio supportDarron Broad2008-10-17
| | | | | | | | | | | | | | | This add initial configuration for radio support on the hvr-3000/4000. FM radio doesn't work as yet without further patches (to come), but this prepares for that. Experimental radio support shows that it works when combined with additional audio routing work for cards with an FMD1216ME analogue frontend, but not the MEX variant (more later). Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9228): cx88: Add audio routing for the hvr-3000/4000Darron Broad2008-10-17
| | | | | | | | | | | | | | | | | | | | This adds audio routing on the hvr-3000/4000 This is a preliminary patch for later routing requirements. This adds line-in support on the 2 cards mentioned. It is also apparent that there is an initial open fault for line-in when opening composite/s-video. This will be fixed later. It was also noticed that the bit-field for audio routing which was 2 bits needs an increase as the WM8775 for example, allows a value 4 bits wide for it's audio mux. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9226): MFE: cx88: Reset cx22702 on hvr-3000/4000Darron Broad2008-10-17
| | | | | | | | | The cx22702 is now always reset on module load. Prior to this the cx22702 was not found on i2c scan without a full reset. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9223): MFE: Fix a number of bugs and some tidying upDarron Broad2008-10-17
| | | | | | | | | | | | | | A number of reference to videobuf_dvb_get_frontend used an invalid index. This has been fixed. The section for the HVR3000 in advise_acquire was redundant as the same logic is used on the HVR4000. This has been removed and both cards now use the same function. A number of small errors and whitespace errors are also fixed. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9222): S2API: Add Multiple-frontend on a single adapter support.Steven Toth2008-10-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A detailed description from the original patches 2 years ago: "The WinTV-HVR3000 has a single transport bus which is shared between a DVB-T and DVB-S modulator. These patches build on the bus acquisition cx88 work from a few weeks ago to add support for this. So to applications the HVR3000 looks like this: /dev/dvb/adapter0/fe0 (cx24123 DVB-S demod) /dev/dvb/adapter0/fe1 (cx22702 DVB-T demod) Additional boards continue as before, eg: /dev/dvb/adapter1/fe0 (lgdt3302 ATSC demod) The basic change is removing the single instance of the videobuf_dvb in cx8802_dev and saa7134_dev(?) and replacing it with a list and some supporting functions. *NOTE* This branch was taken before v4l-dvb was closed for 2.6.19 so two or three current cx88 patches appear to be reversed by this tree, this will be cleaned up in the near future. The patches missing change the mutex handing to core->lock, fix an enumeration problem." It should be recognised that a number of people have been maintaining this patchset. Significant levels of Kudos to everyone one involved, including but not limited to: Darron Broad Fabio M. Di Nitto Carlo Scarfoglio Hans Werner Without the work of these people, and countless others, my two year old patches would of died on the Mercurial linuxtv.org vine a long time ago. TODO: Revise these patches a little further so that the need for demux1 and dvr0 is optional, not mandatory on the HVR3000. HISTORY (darron): This is the last update to MFE prepared by Hans which is based upon the `scratchpad' diff created by Carlo. All MFE work prior to that point must be attributed to Fabio who ported and maintained Steve's original patch up to that time. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9186): Added support for Prof 7300 DVB-S/S2 cardsOleg Roitburd2008-10-13
| | | | | | | | | | Added support for Prof 7300 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Oleg Roitburd <oroitburd@gmail.com> Signed-off-by: Steven Toth <stoth@linuxtv.org> [mchehab@redhat.com: fixed CARDLIST.cx88 entry] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9135): cx88 Dvico FusionHDTV ProTim Farrington2008-10-12
| | | | | | | | | | | | | | | | | | | | | Well, one thing you encouraged me to do was re-test some of my cards which contained the xc3028-zarlink combo. Which led me to test a Dvico FusionHDTV Pro. Almost a year ago, Chris Pascoe did a patch for this which can be found at his ~pascoe/xc-test at Linuxtv. This worked very well, however that was using his version of firmware. Alas, someone attempted to use this and patch v4l-dvb, and messed it up. So I've fixed it. I enclose the patch against today's tree (containing your latest tuner-xc2028.c patch). The card now works very well, well with DVB-T anyway. Signed-off-by: Tim Farrington <timf@iinet.net.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9066): Pinnacle Hybrid PCTV Pro (pctv310c) DVB-T supportStéphane Voltz2008-10-12
| | | | | | | | | | | | | | | | | | This patch against latest mercurial makes DVB-T working on Pinnacle Hybrid PCTV Pro (pctv310c). In cx88-dvb.c, a specific zl10353_config is created with the if2 inferred from the old comment in the currently used config. It is then used for attach, and i2c_gate_ctrl is set to NULL. The entry in cx88-cards.c is modified with GPIO gathered from windows with regspy, and DVB enabled. The frontend is set to XC3028_FE_ZARLINK456 to match the zl10353_config. It is working great with the freeview channels I can receive. Signed-off-by: Stéphane Voltz <stef.dev@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9062): Add support for Prolink Pixelview Global ExtremeMauro Carvalho Chehab2008-10-12
| | | | | | | | Thanks to Sidney Matias <sidney.matias@gmail.com> for getting GPIO values and testing on this device. Cc: Sidney Matias <sidney.matias@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9049): convert tuner drivers to use dvb_frontend->callbackMichael Krufky2008-10-12
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9026): Add support for ST STV0288 demodulator and cards with it.Igor M. Liplianin2008-10-12
| | | | | | | | | | Add support for ST STV0288 demodulator and cards with it, such as TeVii S420. Patch is co-authored with Georg Acher <acher@baycom.de> Signed-off-by: Georg Acher <acher@baycom.de> Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9023): cx88: HVR3000 / 4000 GPIO related changesSteven Toth2008-10-12
| | | | | | | Patch by Darron Broad. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9020): Added support for TBS 8920 DVB-S/S2 cardOleg Roitburd2008-10-12
| | | | | | | | Added support for TBS 8920 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Oleg Roitburd <oroitburd@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9019): Added support for Omicom SS4 DVB-S/S2 cardOleg Roitburd2008-10-12
| | | | | | | | Added support for Omicom SS4 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Oleg Roitburd <oroitburd@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (8989): Added support for TeVii S460 DVB-S/S2 cardIgor M. Liplianin2008-10-12
| | | | | | | | Added support for TeVii S460 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (8987): cx88: Add support for the Hauppauge HVR4000 and HVR4000-LITE ↵Steven Toth2008-10-12
| | | | | | | | | | (S2) boards Adding support for Hauppauge's cx88 S2 based products, based on the cx24116 DVB-S2 demodulator. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (8477): v4l: remove obsolete audiochip.hHans Verkuil2008-07-26
| | | | | | | | Converted the last users of audiochip.h to the v4l2-chip-ident.h header and remove the now unused audiochip.h header. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7990): Fix entry for PowerColor RA 330 and make it run with ↵Daniel Gimpelevich2008-06-05
| | | | | | | firmware version 2.7 Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7749): cx88: fix tuner setupMauro Carvalho Chehab2008-04-29
| | | | | | | | | | | | | | | | | | | | | | | Tuner setup were happening during i2c attach callback. This means that it would happen on two conditions: 1) if tuner module weren't load, it will happen at request_module("tuner"); 2) if tuner is not compiled as a module, or it is already loaded (for example, on setups with more than one tuner), it will happen when cx88 registers I2C bus. Due to that, if tuner were loaded, tuner setup will happen _before_ reading the proper values at tuner eeprom. Since set_addr refuses to change for a tuner that were previously defined (except if the tuner_addr is set), this were making eeprom tuner detection useless. This patch removes tuner type setup from cx88-i2c, moving it to the proper place, after taking eeprom into account. Reviewed-by: Gert Vervoort <gert.vervoort@hccnet.nl> Reviewed-by: Ian Pickworth <ian@pickworth.me.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7742): cx88: Add support for the DViCO FusionHDTV_7_GOLD digital modesSteven Toth2008-04-26
| | | | | | | The S5H1411 demodulator is now enabled. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7642): cx88: enable radio GPIO correctlySteven Toth2008-04-24
| | | | | | | cx88: enable radio GPIO correctly. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7505): Powercolor Real Angel 330 (fixes gpio references)Dâniel Fraga2008-04-24
| | | | | | | The attached patch fixes gpio references for Powercolor Real Angel 330. Signed-off-by: Daniel Fraga <fragabr@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7448): Add support for Kworld ATSC 120Mauro Carvalho Chehab2008-04-24
| | | | | | | | | | | | | | | | | This board has a s5h1409 demod, plus a xc30x8 tuner (probably, xc3018). This patch adds proper support for radio, video, s-video, composite and ATSC. However, support for radio and video depends on having s5h1409 i2c gate open, otherwise, xc30x8 chip won't be visible. For a better support, some rework is needed on cx88 driver, to allow adding xc30x8 to i2c bus without sending i2c 0 byte reading to 0xc2 address. Thanks to Vanessa Ezekowitz <vanessaezekowitz@gmail.com> for helping to figure out the proper parameters for s5h1409 and the GPIO pins used by each configuration. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7398): Adds an error if priv argument of tuner_callback is NULLMauro Carvalho Chehab2008-04-24
| | | | | | | Adds a consistency check to avoid OOPS, if tuner_callback priv argument is NULL. Also, simplifies callback codes on cx88. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7371): cx88: Fix audio on Prolink Pixelview Mpeg 8000GTMauro Carvalho Chehab2008-04-24
| | | | | | This board works only with non-mts firmware Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7370): Add basic support for Prolink Pixelview MPEG 8000GTMauro Carvalho Chehab2008-04-24
| | | | | | | TV reception ok. S-video and Composite not tested. Audio not tested. IR not implemented yet. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7327): cx88: Fix memset for tuner-xc3028 controlMauro Carvalho Chehab2008-04-24
| | | | | | Fix a cut-and-paste error Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-02 22:57:55 -0500