aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/md
Commit message (Collapse)AuthorAge
* dm snapshot: lock snapshot while supplying statusMikulas Patocka2009-10-16
| | | | | | | | | | This patch locks the snapshot when returning status. It fixes a race when it could return an invalid number of free chunks if someone was simultaneously modifying it. Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm exception store: fix failed set_chunk_size error pathMikulas Patocka2009-10-16
| | | | | | | | Properly close the device if failing because of an invalid chunk size. Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm snapshot: require non zero chunk size by end of ctrMikulas Patocka2009-10-16
| | | | | | | | | | | | If we are creating snapshot with memory-stored exception store, fail if the user didn't specify chunk size. Zero chunk size would probably crash a lot of places in the rest of snapshot code. Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Jonathan Brassow <jbrassow@redhat.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: dec_pending needs locking to save error valueKiyoshi Ueda2009-10-16
| | | | | | | | | | | | | | | | | Multiple instances of dec_pending() can run concurrently so a lock is needed when it saves the first error code. I have never experienced actual problem without locking and just found this during code inspection while implementing the barrier support patch for request-based dm. This patch adds the locking. I've done compile, boot and basic I/O testings. Cc: stable@kernel.org Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: add missing del_gendisk to alloc_dev error pathZdenek Kabelac2009-10-16
| | | | | | | | | | | | | Add missing del_gendisk() to error path when creation of workqueue fails. Otherwice there is a resource leak and following warning is shown: WARNING: at fs/sysfs/dir.c:487 sysfs_add_one+0xc5/0x160() sysfs: cannot create duplicate filename '/devices/virtual/block/dm-0' Cc: stable@kernel.org Signed-off-by: Zdenek Kabelac <zkabelac@redhat.com> Reviewed-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm log: userspace fix incorrect luid cast in userspace_ctrAndrew Morton2009-10-16
| | | | | | | | | | | | mips: drivers/md/dm-log-userspace-base.c: In function `userspace_ctr': drivers/md/dm-log-userspace-base.c:159: warning: cast from pointer to integer of different size Cc: stable@kernel.org Cc: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm snapshot: free exception store on init failureJonathan Brassow2009-10-16
| | | | | | | | | | | | While initializing the snapshot module, if we fail to register the snapshot target then we must back-out the exception store module initialization. Cc: stable@kernel.org Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm snapshot: sort by chunk size to fix raceMikulas Patocka2009-10-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid a race causing corruption when snapshots of the same origin have different chunk sizes by sorting the internal list of snapshots by chunk size, largest first. https://bugzilla.redhat.com/show_bug.cgi?id=182659 For example, let's have two snapshots with different chunk sizes. The first snapshot (1) has small chunk size and the second snapshot (2) has large chunk size. Let's have chunks A, B, C in these snapshots: snapshot1: ====A==== ====B==== snapshot2: ==========C========== (Chunk size is a power of 2. Chunks are aligned.) A write to the origin at a position within A and C comes along. It triggers reallocation of A, then reallocation of C and links them together using A as the 'primary' exception. Then another write to the origin comes along at a position within B and C. It creates pending exception for B. C already has a reallocation in progress and it already has a primary exception (A), so nothing is done to it: B and C are not linked. If the reallocation of B finishes before the reallocation of C, because there is no link with the pending exception for C it does not know to wait for it and, the second write is dispatched to the origin and causes data corruption in the chunk C in snapshot2. To avoid this situation, we maintain snapshots sorted in descending order of chunk size. This leads to a guaranteed ordering on the links between the pending exceptions and avoids the problem explained above - both A and B now get linked to C. Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* block: Seperate read and write statistics of in_flight requests v2Nikanth Karthikesan2009-10-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a9327cac440be4d8333bba975cbbf76045096275 added seperate read and write statistics of in_flight requests. And exported the number of read and write requests in progress seperately through sysfs. But Corrado Zoccolo <czoccolo@gmail.com> reported getting strange output from "iostat -kx 2". Global values for service time and utilization were garbage. For interval values, utilization was always 100%, and service time is higher than normal. So this was reverted by commit 0f78ab9899e9d6acb09d5465def618704255963b The problem was in part_round_stats_single(), I missed the following: if (now == part->stamp) return; - if (part->in_flight) { + if (part_in_flight(part)) { __part_stat_add(cpu, part, time_in_queue, part_in_flight(part) * (now - part->stamp)); __part_stat_add(cpu, part, io_ticks, (now - part->stamp)); With this chunk included, the reported regression gets fixed. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> -- Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2009-10-04
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-2.6-block: (41 commits) Revert "Seperate read and write statistics of in_flight requests" cfq-iosched: don't delay async queue if it hasn't dispatched at all block: Topology ioctls cfq-iosched: use assigned slice sync value, not default cfq-iosched: rename 'desktop' sysfs entry to 'low_latency' cfq-iosched: implement slower async initiate and queue ramp up cfq-iosched: delay async IO dispatch, if sync IO was just done cfq-iosched: add a knob for desktop interactiveness Add a tracepoint for block request remapping block: allow large discard requests block: use normal I/O path for discard requests swapfile: avoid NULL pointer dereference in swapon when s_bdev is NULL fs/bio.c: move EXPORT* macros to line after function Add missing blk_trace_remove_sysfs to be in pair with blk_trace_init_sysfs cciss: fix build when !PROC_FS block: Do not clamp max_hw_sectors for stacking devices block: Set max_sectors correctly for stacking devices cciss: cciss_host_attr_groups should be const cciss: Dynamically allocate the drive_info_struct for each logical drive. cciss: Add usage_count attribute to each logical drive in /sys ...
| * Revert "Seperate read and write statistics of in_flight requests"Jens Axboe2009-10-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit a9327cac440be4d8333bba975cbbf76045096275. Corrado Zoccolo <czoccolo@gmail.com> reports: "with 2.6.32-rc1 I started getting the following strange output from "iostat -kx 2": Linux 2.6.31bisect (et2) 04/10/2009 _i686_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 10,70 0,00 3,16 15,75 0,00 70,38 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 18,22 0,00 0,67 0,01 14,77 0,02 43,94 0,01 10,53 39043915,03 2629219,87 sdb 60,89 9,68 50,79 3,04 1724,43 50,52 65,95 0,70 13,06 488437,47 2629219,87 avg-cpu: %user %nice %system %iowait %steal %idle 2,72 0,00 0,74 0,00 0,00 96,53 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 sdb 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 avg-cpu: %user %nice %system %iowait %steal %idle 6,68 0,00 0,99 0,00 0,00 92,33 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 sdb 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 avg-cpu: %user %nice %system %iowait %steal %idle 4,40 0,00 0,73 1,47 0,00 93,40 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 sdb 0,00 4,00 0,00 3,00 0,00 28,00 18,67 0,06 19,50 333,33 100,00 Global values for service time and utilization are garbage. For interval values, utilization is always 100%, and service time is higher than normal. I bisected it down to: [a9327cac440be4d8333bba975cbbf76045096275] Seperate read and write statistics of in_flight requests and verified that reverting just that commit indeed solves the issue on 2.6.32-rc1." So until this is debugged, revert the bad commit. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | dm/connector: Only process connector packages from privileged processesPhilipp Reisner2009-10-02
| | | | | | | | | | Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | connector/dm: Fixed a compilation warningPhilipp Reisner2009-10-02
| | | | | | | | | | | | | | Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | connector: Provide the sender's credentials to the callbackPhilipp Reisner2009-10-02
|/ | | | | | | Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'next' of ↵NeilBrown2009-09-23
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx into for-linus
| * md/raid6: cleanup ops_run_compute6_2Dan Williams2009-09-16
| | | | | | | | | | | | | | | | | | | | Neil says: "It is correct as it stands, but the fact that every branch in the 'if' part ends with a 'return' isn't immediately obvious, so it is clearer if we are explicit about the if / then / else structure." Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| * md/raid6: eliminate BUG_ON with side effectDan Williams2009-09-16
| | | | | | | | | | | | | | | | As pointed out by Neil it should be possible to build a driver with all BUG_ON statements deleted. It's bad form to have a BUG_ON with a side effect. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| * Merge commit 'md/for-linus' into async-tx-nextDan Williams2009-09-08
| |\ | | | | | | | | | | | | Conflicts: drivers/md/raid5.c
| * \ Merge branch 'dmaengine' into async-tx-nextDan Williams2009-09-08
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: crypto/async_tx/async_xor.c drivers/dma/ioat/dma_v2.h drivers/dma/ioat/pci.c drivers/md/raid5.c
| * | | dmaengine: add fence supportDan Williams2009-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some engines optimize operation by reading ahead in the descriptor chain such that descriptor2 may start execution before descriptor1 completes. If descriptor2 depends on the result from descriptor1 then a fence is required (on descriptor2) to disable this optimization. The async_tx api could implicitly identify dependencies via the 'depend_tx' parameter, but that would constrain cases where the dependency chain only specifies a completion order rather than a data dependency. So, provide an ASYNC_TX_FENCE to explicitly identify data dependencies. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| * | | Merge branch 'md-raid6-accel' into ioat3.2Dan Williams2009-09-08
| |\ \ \ | | | | | | | | | | | | | | | | | | | | Conflicts: include/linux/dmaengine.h
| | * | | md/raid456: distribute raid processing over multiple coresDan Williams2009-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the resources to handle stripe_head operations are allocated percpu it is possible for raid5d to distribute stripe handling over multiple cores. This conversion also adds a call to cond_resched() in the non-multicore case to prevent one core from getting monopolized for raid operations. Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | | md/raid6: remove synchronous infrastructureYuri Tikhonov2009-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These routines have been replaced by there asynchronous counterparts. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | | md/raid6: asynchronous handle_stripe6Yuri Tikhonov2009-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1/ Use STRIPE_OP_BIOFILL to offload completion of read requests to raid_run_ops 2/ Implement a handler for sh->reconstruct_state similar to the raid5 case (adds handling of Q parity) 3/ Prevent handle_parity_checks6 from running concurrently with 'compute' operations 4/ Hook up raid_run_ops Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | | md/raid6: asynchronous handle_parity_check6Dan Williams2009-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Based on an original patch by Yuri Tikhonov ] Implement the state machine for handling the RAID-6 parities check and repair functionality. Note that the raid6 case does not need to check for new failures, like raid5, as it will always writeback the correct disks. The raid5 case can be updated to check zero_sum_result to avoid getting confused by new failures rather than retrying the entire check operation. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | | md/raid6: asynchronous handle_stripe_dirtying6Yuri Tikhonov2009-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the synchronous implementation of stripe dirtying we processed a degraded stripe with one call to handle_stripe_dirtying6(). I.e. compute the missing blocks from the other drives, then copy in the new data and reconstruct the parities. In the asynchronous case we do not perform stripe operations directly. Instead, operations are scheduled with flags to be later serviced by raid_run_ops. So, for the degraded case the final reconstruction step can only be carried out after all blocks have been brought up to date by being read, or computed. Like the raid5 case schedule_reconstruction() sets STRIPE_OP_RECONSTRUCT to request a parity generation pass and through operation chaining can handle compute and reconstruct in a single raid_run_ops pass. [dan.j.williams@intel.com: fixup handle_stripe_dirtying6 gating] Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | | md/raid6: asynchronous handle_stripe_fill6Yuri Tikhonov2009-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify handle_stripe_fill6 to work asynchronously by introducing fetch_block6 as the raid6 analog of fetch_block5 (schedule compute operations for missing/out-of-sync disks). [dan.j.williams@intel.com: compute D+Q in one pass] Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | | md/raid5,6: common schedule_reconstruction for raid5/6Yuri Tikhonov2009-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend schedule_reconstruction5 for reuse by the raid6 path. Add support for generating Q and BUG() if a request is made to perform 'prexor'. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | | md/raid6: asynchronous raid6 operationsDan Williams2009-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Based on an original patch by Yuri Tikhonov ] The raid_run_ops routine uses the asynchronous offload api and the stripe_operations member of a stripe_head to carry out xor+pq+copy operations asynchronously, outside the lock. The operations performed by RAID-6 are the same as in the RAID-5 case except for no support of STRIPE_OP_PREXOR operations. All the others are supported: STRIPE_OP_BIOFILL - copy data into request buffers to satisfy a read request STRIPE_OP_COMPUTE_BLK - generate missing blocks (1 or 2) in the cache from the other blocks STRIPE_OP_BIODRAIN - copy data out of request buffers to satisfy a write request STRIPE_OP_RECONSTRUCT - recalculate parity for new data that has entered the cache STRIPE_OP_CHECK - verify that the parity is correct The flow is the same as in the RAID-5 case, and reuses some routines, namely: 1/ ops_complete_postxor (renamed to ops_complete_reconstruct) 2/ ops_complete_compute (updated to set up to 2 targets uptodate) 3/ ops_run_check (renamed to ops_run_check_p for xor parity checks) [neilb@suse.de: fixes to get it to pass mdadm regression suite] Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | | md/raid5: factor out mark_uptodate from ops_complete_compute5Dan Williams2009-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ops_complete_compute5 can be reused in the raid6 path if it is updated to generically handle a second target. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | | async_tx: raid6 recovery self testDan Williams2009-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Port drivers/md/raid6test/test.c to use the async raid6 recovery routines. This is meant as a unit test for raid6 acceleration drivers. In addition to the 16-drive test case this implements tests for the 4-disk and 5-disk special cases (dma devices can not generically handle less than 2 sources), and adds a test for the D+Q case. Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | | async_tx: add sum check flagsDan Williams2009-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the flat zero_sum_result with a collection of flags to contain the P (xor) zero-sum result, and the soon to be utilized Q (raid6 reed solomon syndrome) zero-sum result. Use the SUM_CHECK_ namespace instead of DMA_ since these flags will be used on non-dma-zero-sum enabled platforms. Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | | md/raid5,6: add percpu scribble region for buffer listsDan Williams2009-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use percpu memory rather than stack for storing the buffer lists used in parity calculations. Include space for dma address conversions and pass that to async_tx via the async_submit_ctl.scribble pointer. [ Impact: move memory pressure from stack to heap ] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | | md/raid6: move the spare page to a percpu allocationDan Williams2009-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for asynchronous handling of raid6 operations move the spare page to a percpu allocation to allow multiple simultaneous synchronous raid6 recovery operations. Make this allocation cpu hotplug aware to maximize allocation efficiency. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | | md/raid6: release spare page at ->stop()Dan Williams2009-07-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add missing call to safe_put_page from stop() by unifying open coded raid5_conf_t de-allocation under free_conf(). Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | | async_tx: structify submission arguments, add scribbleDan Williams2009-06-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prepare the api for the arrival of a new parameter, 'scribble'. This will allow callers to identify scratchpad memory for dma address or page address conversions. As this adds yet another parameter, take this opportunity to convert the common submission parameters (flags, dependency, callback, and callback argument) into an object that is passed by reference. Also, take this opportunity to fix up the kerneldoc and add notes about the relevant ASYNC_TX_* flags for each routine. [ Impact: moves api pass-by-value parameters to a pass-by-reference struct ] Signed-off-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | | async_tx: kill ASYNC_TX_DEP_ACK flagDan Williams2009-06-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In support of inter-channel chaining async_tx utilizes an ack flag to gate whether a dependent operation can be chained to another. While the flag is not set the chain can be considered open for appending. Setting the ack flag closes the chain and flags the descriptor for garbage collection. The ASYNC_TX_DEP_ACK flag essentially means "close the chain after adding this dependency". Since each operation can only have one child the api now implicitly sets the ack flag at dependency submission time. This removes an unnecessary management burden from clients of the api. [ Impact: clean up and enforce one dependency per operation ] Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | | async_tx: rename zero_sum to valDan Williams2009-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'zero_sum' does not properly describe the operation of generating parity and checking that it validates against an existing buffer. Change the name of the operation to 'val' (for 'validate'). This is in anticipation of the p+q case where it is a requirement to identify the target parity buffers separately from the source buffers, because the target parity buffers will not have corresponding pq coefficients. Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | | Merge branch 'dmaengine' into async-tx-raid6Dan Williams2009-04-08
| | |\ \ \
* | | | | | md: raid-1/10: fix RW bits manipulationDmitry Monakhov2009-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently Jens has changed bio_rw_flagged() logic by following commit 1f98a13f623e0ef666690a18c1250335fc6d7ef1. Now it returns bool instead of int. This broke raid1/raid10 RW bits manipulation logic. One of visible result is BUG_ON triggering due to empty barrier here scsi_lib.c:1108 scsi_setup_fs_cmnd() Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: NeilBrown <neilb@suse.de>
* | | | | | md: remove unnecessary memset from multipath.NeilBrown2009-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent commit bbba809e96539672f775a3d70102657d05816a5b replaced mempool_create_kzalloc_pool with mempool_create_kmalloc_pool plus a memset. This memset is not needed (and we didn't need kzalloc in the first place). Ever field of the allocated structure (struct multipath_bh) is initialised immediately except retry_list, and memset does not initial a list_head anyway. To remove the memset. Signed-off-by: NeilBrown <neilb@suse.de>
* | | | | | md: report device as congested when suspendedNeilBrown2009-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This should writeback from coming when the device is temporarily suspended. Signed-off-by: NeilBrown <neilb@suse.de>
* | | | | | md: Improve name of threads created by md_register_threadNeilBrown2009-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The management thread for raid4,5,6 arrays are all called mdX_raid5, independent of the actual raid level, which is wrong and can be confusion. So change md_register_thread to use the name from the personality unless no alternate name (like 'resync' or 'reshape') is given. This is simpler and more correct. Cc: Jinzc <zhenchengjin@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
* | | | | | md: remove sparse warnings about lock context.NeilBrown2009-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There was a real error here on a failure path where we incorrectly call rcu_read_unlock. Signed-off-by: NeilBrown <neilb@suse.de>
* | | | | | md: remove sparse waring "symbol xxx shadows an earlier one"NeilBrown2009-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename some variable and remove some duplicate definitions to avoid there warnings. None of them are actual errors. Signed-off-by: NeilBrown <neilb@suse.de>
* | | | | | Merge branch 'for-linus' of ↵Linus Torvalds2009-09-22
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) trivial: fix typo in aic7xxx comment trivial: fix comment typo in drivers/ata/pata_hpt37x.c trivial: typo in kernel-parameters.txt trivial: fix typo in tracing documentation trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c trivial: remove unnecessary semicolons trivial: Fix duplicated word "options" in comment trivial: kbuild: remove extraneous blank line after declaration of usage() trivial: improve help text for mm debug config options trivial: doc: hpfall: accept disk device to unload as argument trivial: doc: hpfall: reduce risk that hpfall can do harm trivial: SubmittingPatches: Fix reference to renumbered step trivial: fix typos "man[ae]g?ment" -> "management" trivial: media/video/cx88: add __init/__exit macros to cx88 drivers trivial: fix typo in CONFIG_DEBUG_FS in gcov doc trivial: fix missing printk space in amd_k7_smp_check trivial: fix typo s/ketymap/keymap/ in comment trivial: fix typo "to to" in multiple files trivial: fix typos in comments s/DGBU/DBGU/ ...
| * | | | | | trivial: fix typo "for for" in multiple filesAnand Gadiyar2009-09-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | trivial: fix typo "for for" in multiple files Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | | | | | md: avoid use of broken kzalloc mempoolSage Weil2009-09-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kzalloc mempool does not re-zero items that have been used and then returned to the pool. Manually zero the allocated multipath_bh instead. Acked-by: Neil Brown <neilb@suse.de> Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | | const: make block_device_operations constAlexey Dobriyan2009-09-22
|/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | Driver-Core: extend devnode callbacks to provide permissionsKay Sievers2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows subsytems to provide devtmpfs with non-default permissions for the device node. Instead of the default mode of 0600, null, zero, random, urandom, full, tty, ptmx now have a mode of 0666, which allows non-privileged processes to access standard device nodes in case no other userspace process applies the expected permissions. This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-02 06:56:25 -0500