aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/md
Commit message (Collapse)AuthorAge
* [PATCH] drivers/md/raid6algos.c: fix a NULL dereferenceAdrian Bunk2006-06-23
| | | | | | | | | | This patch fixes a NULL dereference spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Fix badness in sysfs_notify caused by md_new_eventNeilBrown2006-05-31
| | | | | | | | | | | | | | | | | | | | | From: NeilBrown <neilb@suse.de> If an error is reported by a drive in a RAID array (which is done via bi_end_io - in interrupt context), we call md_error and md_new_event which calls sysfs_notify. However sysfs_notify grabs a mutex and so cannot be called in interrupt context. This patch just creates a variant of md_new_event which avoids the sysfs call, and uses that. A better fix for later is to arrange for the event to be called from user-context. Note: avoiding the sysfs call isn't a problem as an error will not, by itself, modify the sync_action attribute. (We do still need to wake_up(&md_event_waiters) as an error by itself will modify /proc/mdstat). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Unlock md devices when stopping them on reboot.Neil Brown2006-05-26
| | | | | | | otherwise we get nasty messages about locks not being released. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: fix possible oops when starting a raid0 arrayNeilBrown2006-05-23
| | | | | | | | | | | | | | | | | | | | | | | | | This loop that sets up the hash_table has problems. Careful examination will show that the last time through, everything but the first line is pointless. This is because all it does is change 'cur' and 'size' and neither of these are used after the loop. This should ring warning bells... That last time through the loop, size += conf->strip_zone[cur].size can index off the end of the strip_zone array. Depending on what it finds there, it might exit the loop cleanly, or it might spin going further and further beyond the array until it hits an unmapped address. This patch rearranges the code so that the last, pointless, iteration of the loop never happens. i.e. the one statement of the last loop that is needed is moved the the end of the previous loop - or to before the loop starts - and the loop counter starts from 1 instead of 0. Cc: "Don Dupuis" <dondster@gmail.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Fix inverted test for 'repair' directive.NeilBrown2006-05-21
| | | | | | | | | We should be able to write 'repair' to /sys/block/mdX/md/sync_action, however due to and inverted test, that always given EINVAL. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Fix 'rdev->nr_pending' count when retrying barrier requestsNeilBrown2006-05-01
| | | | | | | | | | | | | | When retrying a failed BIO_RW_BARRIER request, we need to keep the reference in ->nr_pending over the whole retry. Currently, we only hold the reference if the failed request is the *last* one to finish - which is silly, because it would normally be the first to finish. So move the rdev_dec_pending call up into the didn't-fail branch. As the rdev isn't used in the later code, calling rdev_dec_pending earlier doesn't hurt. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Improve detection of lack of barrier support in raid1NeilBrown2006-05-01
| | | | | | | | | | Move the test for 'do barrier work' down a bit so that if the first write to a raid1 is a BIO_RW_BARRIER write, the checking done by superblock writes will cause the right thing to happen. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Change ENOTSUPP to EOPNOTSUPPNeilBrown2006-05-01
| | | | | | | | Because that is what you get if a BIO_RW_BARRIER isn't supported! Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Fixed refcounting/locking when attempting read error correction ↵NeilBrown2006-05-01
| | | | | | | | | | | | in raid10 We need to hold a reference to rdevs while reading and writing to attempt to correct read errors. This reference must be taken under an rcu lock. Signed-off-by: Neil Brown <neilb@suse.de> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Avoid oops when attempting to fix read errors on raid10NeilBrown2006-05-01
| | | | | | | | | | We should add to the counter for the rdev *after* checking if the rdev is NULL!!! Signed-off-by: Neil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: locking fixIngo Molnar2006-04-20
| | | | | | | | | | | | - fix mddev_lock() usage bugs in md_attr_show() and md_attr_store(). [they did not anticipate the possibility of getting a signal] - remove mddev_lock_uninterruptible() [unused] Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sysfs: Allow sysfs attribute files to be pollableNeilBrown2006-04-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | It works like this: Open the file Read all the contents. Call poll requesting POLLERR or POLLPRI (so select/exceptfds works) When poll returns, close the file and go to top of loop. or lseek to start of file and go back to the 'read'. Events are signaled by an object manager calling sysfs_notify(kobj, dir, attr); If the dir is non-NULL, it is used to find a subdirectory which contains the attribute (presumably created by sysfs_create_group). This has a cost of one int per attribute, one wait_queuehead per kobject, one int per open file. The name "sysfs_notify" may be confused with the inotify functionality. Maybe it would be nice to support inotify for sysfs attributes as well? This patch also uses sysfs_notify to allow /sys/block/md*/md/sync_action to be pollable Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] md: make sure 64bit fields in version-1 metadata are 64-bit alignedNeilBrown2006-04-11
| | | | | | | | | | | | | | | | | | | | reshape_position is a 64bit field that was not 64bit aligned. So swap with new_level. NOTE: this is a user-visible change. However: - The bad code has not appeared in a released kernel - This code is still marked 'experimental' - This only affects version-1 superblock, which are not in wide use - These field are only used (rather than simply reported) by user-space tools in extemely rare circumstances : after a reshape crashes in the first second of the reshape process. So I believe that, at this stage, the change is safe. Especially if people heed the 'help' message on use mdadm-2.4.1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* BUG_ON() Conversion in md/raid10.cEric Sesterhenn2006-04-02
| | | | | | | | this changes if() BUG(); constructs to BUG_ON() which is cleaner and can better optimized away Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* BUG_ON() Conversion in md/raid6main.cEric Sesterhenn2006-04-02
| | | | | | | | this changes if() BUG(); constructs to BUG_ON() which is cleaner and can better optimized away Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* BUG_ON() Conversion in md/raid5.cEric Sesterhenn2006-04-02
| | | | | | | | this changes if() BUG(); constructs to BUG_ON() which is cleaner and can better optimized away Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* BUG_ON() Conversion in md/raid1.cEric Sesterhenn2006-03-31
| | | | | | | | this changes if() BUG(); constructs to BUG_ON() which is cleaner and can better optimized away Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* BUG_ON() Conversion in md/dm-target.cEric Sesterhenn2006-03-31
| | | | | | | | this changes if() BUG(); constructs to BUG_ON() which is cleaner and can better optimized away Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] md: Raid-6 did not create sysfs entries for stripe cacheNeilBrown2006-03-31
| | | | | | | Signed-off-by: Brad Campbell <brad@wasp.net.au> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Remove some code that can sleep from under a spinlockNeilBrown2006-03-31
| | | | | | | | And remove the comments that were put in inplace of a fix too.... Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Don't clear bits in bitmap when writing to one device fails ↵NeilBrown2006-03-31
| | | | | | | | | | | | | during recovery Currently a device failure during recovery leaves bits set in the bitmap. This normally isn't a problem as the offending device will be rejected because of errors. However if device re-adding is being used with non-persistent bitmaps, this can be a problem. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Convert reconfig_sem to reconfig_mutexNeilBrown2006-03-27
| | | | | | | | ... being careful that mutex_trylock is inverted wrt down_trylock Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: drivers/mdArjan van de Ven2006-03-27
| | | | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Restore 'remaining' count when retrying an write operationNeilBrown2006-03-27
| | | | | | | | | When retrying a write due to barrier failure, we don't reset 'remaining', so it goes negative and never hits 0 again. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Fix md grow/size code to correctly find the maximum available spaceNeilBrown2006-03-27
| | | | | | | | | | | | | An md array can be asked to change the amount of each device that it is using, and in particular can be asked to use the maximum available space. This currently only works if the first device is not larger than the rest. As 'size' gets changed and so 'fit' becomes wrong. So check if a 'fit' is required early and don't corrupt it. Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Remove bi_end_io call out from under a spinlockNeilBrown2006-03-27
| | | | | | | | | | | | | | | raid5 overloads bi_phys_segments to count the number of blocks that the request was broken in to so that it knows when the bio is completely handled. Accessing this must always be done under a spinlock. In one case we also call bi_end_io under that spinlock, which probably isn't ideal as bi_end_io could be expensive (even though it isn't allowed to sleep). So we reducde the range of the spinlock to just accessing bi_phys_segments. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Remove some stray semi-colons after functions called in macro..NeilBrown2006-03-27
| | | | | | | | | wait_event_lock_irq puts a ';' after its usage of the 4th arg, so we don't need to. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Improve comments about locking situation in raid5 make_requestNeilBrown2006-03-27
| | | | | | Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Support suspending of IO to regions of an md arrayNeilBrown2006-03-27
| | | | | | | | | | | | | | | | | This allows user-space to access data safely. This is needed for raid5 reshape as user-space needs to take a backup of the first few stripes before allowing reshape to commence. It will also be useful in cluster-aware raid1 configurations so that all cluster members can leave a section of the array untouched while a resync/recovery happens. A 'start' and 'end' of the suspended range are written to 2 sysfs attributes. Note that only one range can be suspended at a time. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Make 'reshape' a possible sync_action actionNeilBrown2006-03-27
| | | | | | | | | This allows reshape to be triggerred via sysfs (which is the only way to start it happening). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Split reshape handler in check_reshape and start_reshapeNeilBrown2006-03-27
| | | | | | | | | | check_reshape checks validity and does things that can be done instantly - like adding devices to raid1. start_reshape initiates a restriping process to convert the whole array. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Only checkpoint expansion progress occasionallyNeilBrown2006-03-27
| | | | | | | | | | Instead of checkpointing at each stripe, only checkpoint when a new write would overwrite uncheckpointed data. Block any write to the uncheckpointed area. Arbitrarily checkpoint at least every 3Meg. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Checkpoint and allow restart of raid5 reshapeNeilBrown2006-03-27
| | | | | | | | | | | | | | | | | | | We allow the superblock to record an 'old' and a 'new' geometry, and a position where any conversion is up to. The geometry allows for changing chunksize, layout and level as well as number of devices. When using verion-0.90 superblock, we convert the version to 0.91 while the conversion is happening so that an old kernel will refuse the assemble the array. For version-1, we use a feature bit for the same effect. When starting an array we check for an incomplete reshape and restart the reshape process if needed. If the reshape stopped at an awkward time (like when updating the first stripe) we refuse to assemble the array, and let user-space worry about it. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Final stages of raid5 expand codeNeilBrown2006-03-27
| | | | | | | | | | | | | | | | This patch adds raid5_reshape and end_reshape which will start and finish the reshape processes. raid5_reshape is only enabled in CONFIG_MD_RAID5_RESHAPE is set, to discourage accidental use. Read the 'help' for the CONFIG_MD_RAID5_RESHAPE entry. and Make sure that you have backups, just in case. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Core of raid5 resize processNeilBrown2006-03-27
| | | | | | | | | | | | | | | | | | | | | | This patch provides the core of the resize/expand process. sync_request notices if a 'reshape' is happening and acts accordingly. It allocated new stripe_heads for the next chunk-wide-stripe in the target geometry, marking them STRIPE_EXPANDING. Then it finds which stripe heads in the old geometry can provide data needed by these and marks them STRIPE_EXPAND_SOURCE. This causes stripe_handle to read all blocks on those stripes. Once all blocks on a STRIPE_EXPAND_SOURCE stripe_head are read, any that are needed are copied into the corresponding STRIPE_EXPANDING stripe_head. Once a STRIPE_EXPANDING stripe_head is full, it is marks STRIPE_EXPAND_READY and then is written out and released. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Infrastructure to allow normal IO to continue while array is ↵NeilBrown2006-03-27
| | | | | | | | | | | | | | | | | | | | | expanding We need to allow that different stripes are of different effective sizes, and use the appropriate size. Also, when a stripe is being expanded, we must block any IO attempts until the stripe is stable again. Key elements in this change are: - each stripe_head gets a 'disk' field which is part of the key, thus there can sometimes be two stripe heads of the same area of the array, but covering different numbers of devices. One of these will be marked STRIPE_EXPANDING and so won't accept new requests. - conf->expand_progress tracks how the expansion is progressing and is used to determine whether the target part of the array has been expanded yet or not. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Allow stripes to be expanded in preparation for expanding an arrayNeilBrown2006-03-27
| | | | | | | | | | | | | | | | | | | Before a RAID-5 can be expanded, we need to be able to expand the stripe-cache data structure. This requires allocating new stripes in a new kmem_cache. If this succeeds, we copy cache pages over and release the old stripes and kmem_cache. We then allocate new pages. If that fails, we leave the stripe cache at it's new size. It isn't worth the effort to shrink it back again. Unfortuanately this means we need two kmem_cache names as we, for a short period of time, we have two kmem_caches. So they are raid5/%s and raid5/%s-alt Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Split disks array out of raid5 conf structure so it is easier to ↵NeilBrown2006-03-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | grow The remainder of this batch implements raid5 reshaping. Currently the only shape change that is supported is added a device, but it is envisioned that changing the chunksize and layout will also be supported, as well as changing the level (e.g. 1->5, 5->6). The reshape process naturally has to move all of the data in the array, and so should be used with caution. It is believed to work, and some testing does support this, but wider testing would be great for increasing my confidence. You will need a version of mdadm newer than 2.3.1 to make use of raid5 growth. This is because mdadm need to take a copy of a 'critical section' at the start of the array incase there is a crash at an awkward moment. On restart, mdadm will restore the critical section and allow reshape to continue. I hope to release a 2.4-pre by early next week - it still needs a little more polishing. This patch: Previously the array of disk information was included in the raid5 'conf' structure which was allocated to an appropriate size. This makes it awkward to change the size of that array. So we split it off into a separate kmalloced array which will require a little extra indexing, but is much easier to grow. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Update status_resync to handle LARGE devicesNeilBrown2006-03-27
| | | | | | | | | | status_resync - used by /proc/mdstat to report the status of a resync, assumes that device sizes will always fit into an 'unsigned long' This is no longer the case... Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Fix the 'failed' count for version-0 superblocksNeilBrown2006-03-27
| | | | | | | | | | | We are counting failed devices twice, once of the device that is failed, and once for the hole that has been left in the array. Remove the former so 'failed' matches 'missing'. Storing these counts in the superblock is a bit silly anyway.... Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Add '4' to the list of levels for which bitmaps are supportedNeilBrown2006-03-27
| | | | | | | | I really should make this a function of the personality.... Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Make sure QUEUE_FLAG_CLUSTER is set properly for md.NeilBrown2006-03-27
| | | | | | | | | This flag should be set for a virtual device iff it is set for all underlying devices. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dm: remove unnecessary typecastKevin Corry2006-03-27
| | | | | | | Signed-off-by: Kevin Corry <kevcorry@us.ibm.com> Cc: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dm/md dependency tree in sysfs: dm to use bd_claim_by_diskJun'ichi Nomura2006-03-27
| | | | | | | | | | | | | Use bd_claim_by_disk. Following symlinks are created if dm-0 maps to sda: /sys/block/dm-0/slaves/sda --> /sys/block/sda /sys/block/sda/holders/dm-0 --> /sys/block/dm-0 Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dm/md dependency tree in sysfs: md to use bd_claim_by_diskJun'ichi Nomura2006-03-27
| | | | | | | | | | | | | | | Use bd_claim_by_disk. Following symlinks are created if md0 is built from sda and sdb /sys/block/md0/slaves/sda --> /sys/block/sda /sys/block/md0/slaves/sdb --> /sys/block/sdb /sys/block/sda/holders/md0 --> /sys/block/md0 /sys/block/sdb/holders/md0 --> /sys/block/md0 Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dm store geometryDarrick J. Wong2006-03-27
| | | | | | | | | | | Allow drive geometry to be stored with a new DM_DEV_SET_GEOMETRY ioctl. Device-mapper will now respond to HDIO_GETGEO. If the geometry information is not available, zero will be returned for all of the parameters. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dm table: store mdMike Anderson2006-03-27
| | | | | | | | | | | | | | | Store an up-pointer to the owning struct mapped_device in every table when it is created. Access it with: struct mapped_device *dm_table_get_md(struct dm_table *t) Tables linked to md must be destroyed before the md itself. Signed-off-by: Mike Anderson <andmike@us.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dm: tidy mdptrAlasdair G Kergon2006-03-27
| | | | | | | | Change dm_get_mdptr() to take a struct mapped_device instead of dev_t. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dm: store md nameMike Anderson2006-03-27
| | | | | | | | | | The patch stores a printable device number in struct mapped_device for use in warning messages and with a proposed netlink interface. Signed-off-by: Mike Anderson <andmike@us.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dm flush queue EINTRJun'ichi Nomura2006-03-27
| | | | | | | | | | If dm_suspend() is cancelled, bios already added to the deferred list need to be submitted. Otherwise they remain 'in limbo' until there's a dm_resume(). Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-24 01:57:01 -0500