aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/md/raid5.c
Commit message (Collapse)AuthorAge
* md/raid5: STRIPE_ACTIVE has lock semantics, add barriersDan Williams2011-11-08
| | | | | | | | | | | | All updates that occur under STRIPE_ACTIVE should be globally visible when STRIPE_ACTIVE clears. test_and_set_bit() implies a barrier, but clear_bit() does not. This is suitable for 3.1-stable. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org
* md/raid5: abort any pending parity operations when array fails.NeilBrown2011-11-08
| | | | | | | | | | | | | | | | When the number of failed devices exceeds the allowed number we must abort any active parity operations (checks or updates) as they are no longer meaningful, and can lead to a BUG_ON in handle_parity_checks6. This bug was introduce by commit 6c0069c0ae9659e3a91b68eaed06a5c6c37f45c8 in 2.6.29. Reported-by: Manish Katiyar <mkatiyar@gmail.com> Tested-by: Manish Katiyar <mkatiyar@gmail.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org
* Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds2011-11-06
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
| * md: Add module.h to all files using it implicitlyPaul Gortmaker2011-10-31
| | | | | | | | | | | | | | | | A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in md dir are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* | Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-blockLinus Torvalds2011-11-04
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits) block: don't call blk_drain_queue() if elevator is not up blk-throttle: use queue_is_locked() instead of lockdep_is_held() blk-throttle: Take blkcg->lock while traversing blkcg->policy_list blk-throttle: Free up policy node associated with deleted rule block: warn if tag is greater than real_max_depth. block: make gendisk hold a reference to its queue blk-flush: move the queue kick into blk-flush: fix invalid BUG_ON in blk_insert_flush block: Remove the control of complete cpu from bio. block: fix a typo in the blk-cgroup.h file block: initialize the bounce pool if high memory may be added later block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown block: drop @tsk from attempt_plug_merge() and explain sync rules block: make get_request[_wait]() fail if queue is dead block: reorganize throtl_get_tg() and blk_throtl_bio() block: reorganize queue draining block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg() block: pass around REQ_* flags instead of broken down booleans during request alloc/free block: move blk_throtl prototypes to block/blk.h block: fix genhd refcounting in blkio_policy_parse_and_set() ... Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion and making the request functions be of type "void" instead of "int" in - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c} - drivers/staging/zram/zram_drv.c
| * Merge branch 'v3.1-rc10' into for-3.2/coreJens Axboe2011-10-19
| |\ | | | | | | | | | | | | | | | | | | | | | Conflicts: block/blk-core.c include/linux/blkdev.h Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * | block: remove support for bio remapping from ->make_requestChristoph Hellwig2011-09-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is very little benefit in allowing to let a ->make_request instance update the bios device and sector and loop around it in __generic_make_request when we can archive the same through calling generic_make_request from the driver and letting the loop in generic_make_request handle it. Note that various drivers got the return value from ->make_request and returned non-zero values for errors. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | | md: Fix some bugs in recovery_disabled handling.NeilBrown2011-10-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 3.0 we changed the way recovery_disabled was handle so that instead of testing against zero, we test an mddev-> value against a conf-> value. Two problems: 1/ one place in raid1 was missed and still sets to '1'. 2/ We didn't explicitly set the conf-> value at array creation time. It defaulted to '0' just like the mddev value does so they could appear equal and thus disable recovery. This did not affect normal 'md' as it calls bind_rdev_to_array which changes the mddev value. However the dmraid interface doesn't call this and so doesn't change ->recovery_disabled; so at array start all recovery is incorrectly disabled. So initialise the 'conf' value to one less that the mddev value, so the will only be the same when explicitly set that way. Reported-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
* | | md/raid5: fix bug that could result in reads from a failed device.NeilBrown2011-10-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This bug was introduced in 415e72d034c50520ddb7ff79e7d1792c1306f0c9 which was in 2.6.36. There is a small window of time between when a device fails and when it is removed from the array. During this time we might still read from it, but we won't write to it - so it is possible that we could read stale data. We didn't need the test of 'Faulty' before because the test on In_sync is sufficient. Since we started allowing reads from the early part of non-In_sync devices we need a test on Faulty too. This is suitable for any kernel from 2.6.36 onwards, though the patch might need a bit of tweaking in 3.0 and earlier. Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
* | | md: rename "mdk_personality" to "md_personality"NeilBrown2011-10-11
| | | | | | | | | | | | | | | | | | "mdk" doesn't mean anything any more. Signed-off-by: NeilBrown <neilb@suse.de>
* | | md/raid5: typedef removal: raid5_conf_t -> struct r5confNeilBrown2011-10-11
| | | | | | | | | | | | Signed-off-by: NeilBrown <neilb@suse.de>
* | | md/raid0: typedef removal: raid0_conf_t -> struct r0confNeilBrown2011-10-11
| | | | | | | | | | | | Signed-off-by: NeilBrown <neilb@suse.de>
* | | md: remove typedefs: mddev_t -> struct mddevNeilBrown2011-10-11
| | | | | | | | | | | | | | | | | | Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
* | | md: removing typedefs: mdk_rdev_t -> struct md_rdevNeilBrown2011-10-11
| | | | | | | | | | | | | | | | | | | | | The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
* | | md: remove some old DEBUGging code.NeilBrown2011-10-06
| | | | | | | | | | | | | | | | | | | | | This code is not really helpful and is hard to maintain, so just discard it. Signed-off-by: NeilBrown <neilb@suse.de>
* | | md/raid5: convert to macros into inline functions.NeilBrown2011-10-06
| | | | | | | | | | | | | | | | | | More type-safety. Easier to read. Signed-off-by: NeilBrown <neilb@suse.de>
* | | md/raid5: remove pointless NULL test.NeilBrown2011-10-06
| |/ |/| | | | | | | | | | | | | In the 'abort' branch of run(), 'conf' cannot possibly be NULL, so remove the test. Reported-by: Zdenek Kabelac <zdenek.kabelac@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
* | md: Avoid waking up a thread after it has been freed.NeilBrown2011-09-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two related problems: 1/ some error paths call "md_unregister_thread(mddev->thread)" without subsequently clearing ->thread. A subsequent call to mddev_unlock will try to wake the thread, and crash. 2/ Most calls to md_wakeup_thread are protected against the thread disappeared either by: - holding the ->mutex - having an active request, so something else must be keeping the array active. However mddev_unlock calls md_wakeup_thread after dropping the mutex and without any certainty of an active request, so the ->thread could theoretically disappear. So we need a spinlock to provide some protections. So change md_unregister_thread to take a pointer to the thread pointer, and ensure that it always does the required locking, and clears the pointer properly. Reported-by: "Moshe Melnikov" <moshe@zadarastorage.com> Signed-off-by: NeilBrown <neilb@suse.de> cc: stable@kernel.org
* | md/raid5: fix a hang on device failure.NeilBrown2011-08-30
|/ | | | | | | | | | | Waiting for a 'blocked' rdev to become unblocked in the raid5d thread cannot work with internal metadata as it is the raid5d thread which will clear the blocked flag. This wasn't a problem in 3.0 and earlier as we only set the blocked flag when external metadata was used then. However we now set it always, so we need to be more careful. Signed-off-by: NeilBrown <neilb@suse.de>
* md/raid5: Clear bad blocks on successful write.NeilBrown2011-07-27
| | | | | | | On a successful write to a known bad block, flag the sh so that raid5d can remove the known bad block from the list. Signed-off-by: NeilBrown <neilb@suse.de>
* md/raid5. Don't write to known bad block on doubtful devices.NeilBrown2011-07-27
| | | | | | | If a device has seen write errors, don't write to any known bad blocks on that device. Signed-off-by: NeilBrown <neilb@suse.de>
* md/raid5: write errors should be recorded as bad blocks if possible.NeilBrown2011-07-27
| | | | | | | | | | When a write error is detected, don't mark the device as failed immediately but rather record the fact for handle_stripe to deal with. Handle_stripe then attempts to record a bad block. Only if that fails does the device get marked as faulty. Signed-off-by: NeilBrown <neilb@suse.de>
* md/raid5: use bad-block log to improve handling of uncorrectable read errors.NeilBrown2011-07-27
| | | | | | | | | | | | | If we get an uncorrectable read error - record a bad block rather than failing the device. And if these errors (which may be due to known bad blocks) cause recovery to be impossible, record a bad block on the recovering devices, or abort the recovery. As we might abort a recovery without failing a device we need to teach RAID5 about recovery_disabled handling. Signed-off-by: NeilBrown <neilb@suse.de>
* md/raid5: avoid reading from known bad blocks.NeilBrown2011-07-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two times that we might read in raid5: 1/ when a read request fits within a chunk on a single working device. In this case, if there is any bad block in the range of the read, we simply fail the cache-bypass read and perform the read though the stripe cache. 2/ when reading into the stripe cache. In this case we mark as failed any device which has a bad block in that strip (1 page wide). Note that we will both avoid reading and avoid writing. This is correct (as we will never read from the block, there is no point writing), but not optimal (as writing could 'fix' the error) - that will be addressed later. If we have not seen any write errors on the device yet, we treat a bad block like a recent read error. This will encourage an attempt to fix the read error which will either generate a write error, or will ensure good data is stored there. We don't yet forget the bad block in that case. That comes later. Now that we honour bad blocks when reading we can allow devices with bad blocks into the array. Signed-off-by: NeilBrown <neilb@suse.de>
* md: make it easier to wait for bad blocks to be acknowledged.NeilBrown2011-07-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is only safe to choose not to write to a bad block if that bad block is safely recorded in metadata - i.e. if it has been 'acknowledged'. If it hasn't we need to wait for the acknowledgement. We support that using rdev->blocked wait and md_wait_for_blocked_rdev by introducing a new device flag 'BlockedBadBlock'. This flag is only advisory. It is cleared whenever we acknowledge a bad block, so that a waiter can re-check the particular bad blocks that it is interested it. It should be set by a caller when they find they need to wait. This (set after test) is inherently racy, but as md_wait_for_blocked_rdev already has a timeout, losing the race will have minimal impact. When we clear "Blocked" was also clear "BlockedBadBlocks" incase it was set incorrectly (see above race). We also modify the way we manage 'Blocked' to fit better with the new handling of 'BlockedBadBlocks' and to make it consistent between externally managed and internally managed metadata. This requires that each raidXd loop checks if the metadata needs to be written and triggers a write (md_check_recovery) if needed. Otherwise a queued write request might cause raidXd to wait for the metadata to write, and only that thread can write it. Before writing metadata, we set FaultRecorded for all devices that are Faulty, then after writing the metadata we clear Blocked for any device for which the Fault was certainly Recorded. The 'faulty' device flag now appears in sysfs if the device is faulty *or* it has unacknowledged bad blocks. So user-space which does not understand bad blocks can continue to function correctly. User space which does, should not assume a device is faulty until it sees the 'faulty' flag, and then sees the list of unacknowledged bad blocks is empty. Signed-off-by: NeilBrown <neilb@suse.de>
* md: don't allow arrays to contain devices with bad blocks.NeilBrown2011-07-27
| | | | | | | | | | | | | As no personality understand bad block lists yet, we must reject any device that is known to contain bad blocks. As the personalities get taught, these tests can be removed. This only applies to raid1/raid5/raid10. For linear/raid0/multipath/faulty the whole concept of bad blocks doesn't mean anything so there is no point adding the checks. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
* md/raid5: Avoid BUG caused by multiple failures.NeilBrown2011-07-26
| | | | | | | | | | | | | | While preparing to write a stripe we keep the parity block or blocks locked (R5_LOCKED) - towards the end of schedule_reconstruction. If the array is discovered to have failed before this write completes we can leave those blocks LOCKED, and init_stripe will notice that a free stripe still has a locked block and will complain. So clear the R5_LOCKED flag in handle_failed_stripe, and demote the 'BUG' to a 'WARN_ON'. Signed-off-by: NeilBrown <neilb@suse.de>
* md/raid5: move rdev->corrected_errors countingNamhyung Kim2011-07-26
| | | | | | | | | | Read errors are considered to corrected if write-back and re-read cycle is finished without further problems. Thus moving the rdev-> corrected_errors counting after the re-reading looks more reasonable IMHO. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
* md: introduce link/unlink_rdev() helpersNamhyung Kim2011-07-26
| | | | | | | | | There are places where sysfs links to rdev are handled in a same way. Add the helper functions to consolidate them. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
* md/raid: use printk_ratelimited instead of printk_ratelimitChristian Dietrich2011-07-26
| | | | | | | As per printk_ratelimit comment, it should not be used. Signed-off-by: Christian Dietrich <christian.dietrich@informatik.uni-erlangen.de> Signed-off-by: NeilBrown <neilb@suse.de>
* md/raid5: finalise new merged handle_stripe.NeilBrown2011-07-26
| | | | | | | | | | | handle_stripe5() and handle_stripe6() are now virtually identical. So discard one and rename the other to 'analyse_stripe()'. It always returns 0, so change it to 'void' and remove the 'done' variable in handle_stripe(). Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
* md/raid5: move some more common code into handle_stripeNeilBrown2011-07-26
| | | | | | | | | | | | The RAID6 version of this code is usable for RAID5 providing: - we test "conf->max_degraded" rather than "2" as appropriate - we make sure s->failed_num[1] is meaningful (and not '-1') when s->failed > 1 The 'return 1' must become 'goto finish' in the new location. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
* md/raid5: move more common code into handle_stripeNeilBrown2011-07-26
| | | | | | | | | | | | Apart from 'prexor' which can only be set for RAID5, and 'qd_idx' which can only be meaningful for RAID6, these two chunks of code are nearly the same. So combine them into one adding a test to call either handle_parity_checks5 or handle_parity_checks6 as appropriate. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
* md/raid5: unite handle_stripe_dirtying5 and handle_stripe_dirtying6NeilBrown2011-07-26
| | | | | | | | | | RAID6 is only allowed to choose 'reconstruct-write' while RAID5 is also allow 'read-modify-write' Apart from this difference, handle_stripe_dirtying[56] are nearly identical. So resolve these differences and create just one function. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
* md/raid5: unite fetch_block5 and fetch_block6NeilBrown2011-07-26
| | | | | | | | | | | | | | Provided that ->failed_num[1] is not a valid device number (which is easily achieved) fetch_block6 provides all the functionality of fetch_block5. So remove the latter and rename the former to simply "fetch_block". Then handle_stripe_fill5 and handle_stripe_fill6 become the same and can similarly be united. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
* md/raid5: rearrange a test in fetch_block6.NeilBrown2011-07-26
| | | | | | | | | | | | | | | | | | | Next patch will unite fetch_block5 and fetch_block6. First I want to make the differences a little more clear. For RAID6 if we are writing at all and there is a failed device, then we need to load or compute every block so we can do a reconstruct-write. This case isn't needed for RAID5 - we will do a read-modify-write in that case. So make that test a separate test in fetch_block6 rather than merged with two other tests. Make a similar change in fetch_block5 so the one bit that is not needed for RAID6 is clearly separate. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
* md/raid5: move more code into common handle_stripeNeilBrown2011-07-26
| | | | | | | | The difference between the RAID5 and RAID6 code here is easily resolved using conf->max_degraded. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
* md/raid5: Move code for finishing a reconstruction into handle_stripe.NeilBrown2011-07-26
| | | | | | | | | | | | | | Prior to commit ab69ae12ceef7 the code in handle_stripe5 and handle_stripe6 to "Finish reconstruct operations initiated by the expansion process" was identical. That commit added an identical stanza of code to each function, but in different places. That was careless. The raid5 code was correct, so move that out into handle_stripe and remove raid6 version. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
* md/raid5: Remove stripe_head_state arg from handle_stripe_expansion.NeilBrown2011-07-26
| | | | | | | | | | | | | This arg is only used to differentiate between RAID5 and RAID6 but that is not needed. For RAID5, raid5_compute_sector will set qd_idx to "~0" so j with certainly not equals qd_idx, so there is no need for a guard on that condition. So remove the guard and remove the arg from the declaration and callers of handle_stripe_expansion. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
* md/raid5: move stripe_head_state and more code into handle_stripe.NeilBrown2011-07-25
| | | | | | | | | | | | | | By defining the 'stripe_head_state' in 'handle_stripe', we can move some common code out of handle_stripe[56]() and into handle_stripe. The means that all accesses for stripe_head_state in handle_stripe[56] need to be 's->' instead of 's.', but the compiler should inline those functions and just use a direct stack reference, and future patches while hoist most of this code up into handle_stripe() so we will revert to "s.". Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
* md/raid5: add some more fields to stripe_head_stateNeilBrown2011-07-25
| | | | | | | | | | Adding these three fields will allow more common code to be moved to handle_stripe() struct field rearrangement by Namhyung Kim. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
* md/raid5: unify stripe_head_state and r6_stateNeilBrown2011-07-25
| | | | | | | | | | | | | | | 'struct stripe_head_state' stores state about the 'current' stripe that is passed around while handling the stripe. For RAID6 there is an extension structure: r6_state, which is also passed around. There is no value in keeping these separate, so move the fields from the latter into the former. This means that all code now needs to treat s->failed_num as an small array, but this is a small cost. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
* md/raid5: move common code into handle_stripeNeilBrown2011-07-25
| | | | | | | | There is common code at the start of handle_stripe5 and handle_stripe6. Move it into handle_stripe. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
* md/raid5: replace sh->lock with an 'active' flag.NeilBrown2011-07-25
| | | | | | | | | | | | | | | | | | | | | | | sh->lock is now mainly used to ensure that two threads aren't running in the locked part of handle_stripe[56] at the same time. That can more neatly be achieved with an 'active' flag which we set while running handle_stripe. If we find the flag is set, we simply requeue the stripe for later by setting STRIPE_HANDLE. For safety we take ->device_lock while examining the state of the stripe and creating a summary in 'stripe_head_state / r6_state'. This possibly isn't needed but as shared fields like ->toread, ->towrite are checked it is safer for now at least. We leave the label after the old 'unlock' called "unlock" because it will disappear in a few patches, so renaming seems pointless. This leaves the stripe 'locked' for longer as we clear STRIPE_ACTIVE later, but that is not a problem. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
* md/raid5: Protect some more code with ->device_lock.NeilBrown2011-07-25
| | | | | | | | | | | | | Other places that change or follow dev->towrite and dev->written take the device_lock as well as the sh->lock. So it should really be held in these places too. Also, doing so will allow sh->lock to be discarded. with merged fixes by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
* md/raid5: Remove use of sh->lock in sync_requestNeilBrown2011-07-25
| | | | | | | | | | | | | | This is the start of a series of patches to remove sh->lock. sync_request takes sh->lock before setting STRIPE_SYNCING to ensure there is no race with testing it in handle_stripe[56]. Instead, use a new flag STRIPE_SYNC_REQUESTED and test it early in handle_stripe[56] (after getting the same lock) and perform the same set/clear operations if it was set. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
* md/raid5: get rid of duplicated call to bio_data_dir()Namhyung Kim2011-07-18
| | | | | | | | In raid5::make_request(), once bio_data_dir(@bi) is detected it never (and couldn't) be changed. Use the result always. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
* md/raid5: use kmem_cache_zalloc()Namhyung Kim2011-07-18
| | | | | | | | | Replace kmem_cache_alloc + memset(,0,) to kmem_cache_zalloc. I think it's not harmful since @conf->slab_cache already knows actual size of struct stripe_head. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
* md/raid5: remove unusual use of bio_iovec_idx()Namhyung Kim2011-06-14
| | | | | | | | | | In the bio_for_each_segment loop, bvl always points current bio_vec, so the same as bio_iovec_idx(, i). Let's get rid of it. Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
* md/raid5: fix FUA request handling in ops_run_io()Namhyung Kim2011-06-14
| | | | | | | | | | | | | | | | | Commit e9c7469bb4f5 ("md: implment REQ_FLUSH/FUA support") introduced R5_WantFUA flag and set rw to WRITE_FUA in that case. However remaining code still checks whether rw is exactly same as WRITE or not, so FUAed-write ends up with being treated as READ. Fix it. This bug has been present since 2.6.37 and the fix is suitable for any -stable kernel since then. It is not clear why this has not caused more problems. Cc: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-16 09:15:59 -0500