aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input
Commit message (Expand)AuthorAge
* maple: Kill useless private_data pointer.Paul Mundt2008-08-03
* maple: Clean up maple_driver_register/unregister routines.Paul Mundt2008-08-03
* input: Clean up maple keyboard driverAdrian McMenamin2008-08-03
* maple: allow removal and reinsertion of keyboard driver moduleAdrian McMenamin2008-08-03
* sh: More header path fixups for mach dir refactoring.Paul Mundt2008-07-29
* Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dto...Linus Torvalds2008-07-28
|\
| * Input: add driver for Atmel integrated touchscreen controllerDan Liang2008-07-23
| * Input: ads7846 - optimize order of calculating Rt in ads7846_rx()Hans-Christian Egtvedt2008-07-23
| * Input: ads7846 - fix sparse endian warningsHarvey Harrison2008-07-23
| * Input: uinput - remove duplicate includeHuang Weiyi2008-07-23
| * Input: serio - offload resume to kseriodShaohua Li2008-07-23
* | sh_keysc: remove request_mem_region() and release_mem_region()Tetsuya Mukawa2008-07-28
* | [ARM] 5179/1: Replace obsolete IRQT_* and __IRQT_* values with IRQ_TYPE_*Dmitry Baryshkov2008-07-27
* | Undo duplicate "m68k: drivers/input/serio/hp_sdc.c needs <linux/semaphore.h>"Linus Torvalds2008-07-25
* | Add missing semaphore.h includesMatthew Wilcox2008-07-24
* | Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2008-07-23
|\ \ | |/ |/|
| * Merge branch 'pxa' into develRussell King2008-07-13
| |\
| | * Merge branch 'pxa-tosa' into pxaRussell King2008-07-12
| | |\
| | | * [ARM] 5064/1: pxa: explicitly specify tosa keyboard GPIOs' low power states t...eric miao2008-07-07
* | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into nextDmitry Torokhov2008-07-21
|\ \ \ \
| * | | | m68k: Return -ENODEV if no device is foundGeert Uytterhoeven2008-07-20
| * | | | tty: Ldisc revampAlan Cox2008-07-20
| * | | | Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6Linus Torvalds2008-07-14
| |\ \ \ \
| | * | | | Merge commit 'v2.6.26' into bkl-removalJonathan Corbet2008-07-14
| | |\| | |
| | * | | | uinput: BKL pushdownArnd Bergmann2008-07-02
| | * | | | serio: BKL pushdownArnd Bergmann2008-07-02
| | * | | | mousedev: BKL pushdownArnd Bergmann2008-07-02
| | * | | | hp_sdc_rtc: BKL pushdownArnd Bergmann2008-06-20
| | * | | | Input: cdev lock_kernel() pushdownJonathan Corbet2008-06-20
| | | |_|/ | | |/| |
| | | | |
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| *---------. \ \ \ Merge branches 'x86/numa-fixes', 'x86/apic', 'x86/apm', 'x86/bitops', 'x86/bu...Ingo Molnar2008-07-08
| |\ \ \ \ \ \ \ \ \ | | |_|_|_|_|_|/ / / | |/| | | | | | / / | | | |_|_|_|_|/ / | | |/| | | | | / | | | | | | |_|/ | | | | | |/| |
| | | | | | | * Merge commit 'v2.6.26-rc8' into x86/xenIngo Molnar2008-06-25
| | | | | | | |\ | | | | | | |_|/ | | | | | |/| |
| | | | | | | * Merge branch 'linus' into x86/xenIngo Molnar2008-06-16
| | | | | | | |\ | | | | | | | |/ | | | | | | |/|
| | | | | | | * xen pvfb: Dynamic mode support (screen resizing)Markus Armbruster2008-05-27
| | | | | | | * xen pvfb: Module aliases to support module autoloadingMarkus Armbruster2008-05-27
| | | | | | | * xen pvfb: Pointer z-axis (mouse wheel) supportMarkus Armbruster2008-05-27
| | | | |_|_|/ | | | |/| | |
| | * | | | | drivers/input/ff-core.c needs <linux/sched.h>Geert Uytterhoeven2008-07-02
| | * | | | | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dto...Linus Torvalds2008-06-30
| | |\ \ \ \ \ | | | |_|_|/ / | | |/| | | |
| | | * | | | Input: fix locking in force-feedback coreDmitry Torokhov2008-06-30
| | * | | | | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dto...Linus Torvalds2008-06-17
| | |\| | | | | | | |_|_|/ | | |/| | |
| | * | | | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dto...Linus Torvalds2008-05-30
| | |\ \ \ \ | | | |_|/ / | | |/| | |
| | * | | | MODULE_LICENSE expects "GPL v2", not "GPLv2"Al Viro2008-05-21
| |/ / / /
| * | | | m68k: Return -ENODEV if no device is foundGeert Uytterhoeven2008-05-18
| * | | | m68k: Some input drivers do not check the platformGeert Uytterhoeven2008-05-18
| | |_|/ | |/| |
* | | | Input: i8042 - add Arima-Rioworks HDAMB board to noloop listDmitry Torokhov2008-07-19
* | | | Input: sgi_btns - add support for SGI Indy volume buttonsThomas Bogendoerfer2008-07-19
* | | | Input: add option to disable HP SDC driverHelge Deller2008-07-19
* | | | Input: add new serio driver for Xilinx XPS PS2 IPJohn Linn2008-07-07
* | | | Input: add driver for Tabletkiosk Sahara TouchIT-213 touchscreenClaudio Nieder2008-07-07
* | | | Input: new driver for SGI O2 volume buttonsThomas Bogendoerfer2008-07-07
* | | | Input: yealink - reliably kill urbsOliver Neukum2008-07-07
generated by cgit v1.2.2 (git 2.25.0) at 2025-09-09 06:40:32 -0400
> #define VFAC_CTL1_FREEZE_CAPTURE_SYNC 0x08 /* sync freeze capture */ #define VFAC_CTL1_VALIDFRAME_SRC 0x10 /* select valid frame source */ #define VFAC_CTL1_PHILIPS 0x40 /* select Philips mode */ #define VFAC_CTL1_MODVINTERPOLCLK 0x80 /* modify vertical interpolation clocl */ #define VFAC_CTL2 0xe9 #define VFAC_CTL2_INVERT_VIDDATAVALID 0x01 /* invert video data valid */ #define VFAC_CTL2_INVERT_GRAPHREADY 0x02 /* invert graphic ready output sig */ #define VFAC_CTL2_INVERT_DATACLK 0x04 /* invert data clock signal */ #define VFAC_CTL2_INVERT_HSYNC 0x08 /* invert hsync input */ #define VFAC_CTL2_INVERT_VSYNC 0x10 /* invert vsync input */ #define VFAC_CTL2_INVERT_FRAME 0x20 /* invert frame odd/even input */ #define VFAC_CTL2_INVERT_BLANK 0x40 /* invert blank output */ #define VFAC_CTL2_INVERT_OVSYNC 0x80 /* invert other vsync input */ #define VFAC_CTL3 0xea #define VFAC_CTL3_CAP_LARGE_FIFO 0x01 /* large capture fifo */ #define VFAC_CTL3_CAP_INTERLACE 0x02 /* capture odd and even fields */ #define VFAC_CTL3_CAP_HOLD_4NS 0x00 /* hold capture data for 4ns */ #define VFAC_CTL3_CAP_HOLD_2NS 0x04 /* hold capture data for 2ns */ #define VFAC_CTL3_CAP_HOLD_6NS 0x08 /* hold capture data for 6ns */ #define VFAC_CTL3_CAP_HOLD_0NS 0x0c /* hold capture data for 0ns */ #define VFAC_CTL3_CHROMAKEY 0x20 /* capture data will be chromakeyed */ #define VFAC_CTL3_CAP_IRQ 0x40 /* enable capture interrupt */ #define CAP_MEM_START 0xeb /* 18 bits */ #define CAP_MAP_WIDTH 0xed /* high 6 bits */ #define CAP_PITCH 0xee /* 8 bits */ #define CAP_CTL_MISC 0xef #define CAP_CTL_MISC_HDIV 0x01 #define CAP_CTL_MISC_HDIV4 0x02 #define CAP_CTL_MISC_ODDEVEN 0x04 #define CAP_CTL_MISC_HSYNCDIV2 0x08 #define CAP_CTL_MISC_SYNCTZHIGH 0x10 #define CAP_CTL_MISC_SYNCTZOR 0x20 #define CAP_CTL_MISC_DISPUSED 0x80 #define REG_BANK 0xfa #define REG_BANK_X 0x00 #define REG_BANK_Y 0x01 #define REG_BANK_W 0x02 #define REG_BANK_T 0x03 #define REG_BANK_J 0x04 #define REG_BANK_K 0x05 /* * Bus-master */ #define BM_VID_ADDR_LOW 0xbc040 #define BM_VID_ADDR_HIGH 0xbc044 #define BM_ADDRESS_LOW 0xbc080 #define BM_ADDRESS_HIGH 0xbc084 #define BM_LENGTH 0xbc088 #define BM_CONTROL 0xbc08c #define BM_CONTROL_ENABLE 0x01 /* enable transfer */ #define BM_CONTROL_IRQEN 0x02 /* enable IRQ at end of transfer */ #define BM_CONTROL_INIT 0x04 /* initialise status & count */ #define BM_COUNT 0xbc090 /* read-only */ /* * TV registers */ #define TV_VBLANK_EVEN_START 0xbe43c #define TV_VBLANK_EVEN_END 0xbe440 #define TV_VBLANK_ODD_START 0xbe444 #define TV_VBLANK_ODD_END 0xbe448 #define TV_SYNC_YGAIN 0xbe44c #define TV_UV_GAIN 0xbe450 #define TV_PED_UVDET 0xbe454 #define TV_UV_BURST_AMP 0xbe458 #define TV_HSYNC_START 0xbe45c #define TV_HSYNC_END 0xbe460 #define TV_Y_DELAY1 0xbe464 #define TV_Y_DELAY2 0xbe468 #define TV_UV_DELAY1 0xbe46c #define TV_BURST_START 0xbe470 #define TV_BURST_END 0xbe474 #define TV_HBLANK_START 0xbe478 #define TV_HBLANK_END 0xbe47c #define TV_PED_EVEN_START 0xbe480 #define TV_PED_EVEN_END 0xbe484 #define TV_PED_ODD_START 0xbe488 #define TV_PED_ODD_END 0xbe48c #define TV_VSYNC_EVEN_START 0xbe490 #define TV_VSYNC_EVEN_END 0xbe494 #define TV_VSYNC_ODD_START 0xbe498 #define TV_VSYNC_ODD_END 0xbe49c #define TV_SCFL 0xbe4a0 #define TV_SCFH 0xbe4a4 #define TV_SCP 0xbe4a8 #define TV_DELAYBYPASS 0xbe4b4 #define TV_EQL_END 0xbe4bc #define TV_SERR_START 0xbe4c0 #define TV_SERR_END 0xbe4c4 #define TV_CTL 0xbe4dc /* reflects a previous register- MVFCLR, MVPCLR etc P241*/ #define TV_VSYNC_VGA_HS 0xbe4e8 #define TV_FLICK_XMIN 0xbe514 #define TV_FLICK_XMAX 0xbe518 #define TV_FLICK_YMIN 0xbe51c #define TV_FLICK_YMAX 0xbe520 /* * Graphics Co-processor */ #define CO_REG_CONTROL 0xbf011 #define CO_CTRL_BUSY 0x80 #define CO_CTRL_CMDFULL 0x04 #define CO_CTRL_FIFOEMPTY 0x02 #define CO_CTRL_READY 0x01 #define CO_REG_SRC_WIDTH 0xbf018 #define CO_REG_PIXFMT 0xbf01c #define CO_PIXFMT_32BPP 0x03 #define CO_PIXFMT_24BPP 0x02 #define CO_PIXFMT_16BPP 0x01 #define CO_PIXFMT_8BPP 0x00 #define CO_REG_FGMIX 0xbf048 #define CO_FG_MIX_ZERO 0x00 #define CO_FG_MIX_SRC_AND_DST 0x01 #define CO_FG_MIX_SRC_AND_NDST 0x02 #define CO_FG_MIX_SRC 0x03 #define CO_FG_MIX_NSRC_AND_DST 0x04 #define CO_FG_MIX_DST 0x05 #define CO_FG_MIX_SRC_XOR_DST 0x06 #define CO_FG_MIX_SRC_OR_DST 0x07 #define CO_FG_MIX_NSRC_AND_NDST 0x08 #define CO_FG_MIX_SRC_XOR_NDST 0x09 #define CO_FG_MIX_NDST 0x0a #define CO_FG_MIX_SRC_OR_NDST 0x0b #define CO_FG_MIX_NSRC 0x0c #define CO_FG_MIX_NSRC_OR_DST 0x0d #define CO_FG_MIX_NSRC_OR_NDST 0x0e #define CO_FG_MIX_ONES 0x0f #define CO_REG_FGCOLOUR 0xbf058 #define CO_REG_BGCOLOUR 0xbf05c #define CO_REG_PIXWIDTH 0xbf060 #define CO_REG_PIXHEIGHT 0xbf062 #define CO_REG_X_PHASE 0xbf078 #define CO_REG_CMD_L 0xbf07c #define CO_CMD_L_PATTERN_FGCOL 0x8000 #define CO_CMD_L_INC_LEFT 0x0004 #define CO_CMD_L_INC_UP 0x0002 #define CO_REG_CMD_H 0xbf07e #define CO_CMD_H_BGSRCMAP 0x8000 /* otherwise bg colour */ #define CO_CMD_H_FGSRCMAP 0x2000 /* otherwise fg colour */ #define CO_CMD_H_BLITTER 0x0800 #define CO_REG_SRC1_PTR 0xbf170 #define CO_REG_SRC2_PTR 0xbf174 #define CO_REG_DEST_PTR 0xbf178 #define CO_REG_DEST_WIDTH 0xbf218 /* * Private structure */ struct cfb_info; struct cyberpro_info { struct pci_dev *dev; unsigned char __iomem *regs; char __iomem *fb; char dev_name[32]; unsigned int fb_size; unsigned int chip_id; /* * The following is a pointer to be passed into the * functions below. The modules outside the main * cyber2000fb.c driver have no knowledge as to what * is within this structure. */ struct cfb_info *info; /* * Use these to enable the BM or TV registers. In an SMP * environment, these two function pointers should only be * called from the module_init() or module_exit() * functions. */ void (*enable_extregs)(struct cfb_info *); void (*disable_extregs)(struct cfb_info *); }; #define ID_IGA_1682 0 #define ID_CYBERPRO_2000 1 #define ID_CYBERPRO_2010 2 #define ID_CYBERPRO_5000 3 struct fb_var_screeninfo; /* * Note! Writing to the Cyber20x0 registers from an interrupt * routine is definitely a bad idea atm. */ int cyber2000fb_attach(struct cyberpro_info *info, int idx); void cyber2000fb_detach(int idx); void cyber2000fb_enable_extregs(struct cfb_info *cfb); void cyber2000fb_disable_extregs(struct cfb_info *cfb); void cyber2000fb_get_fb_var(struct cfb_info *cfb, struct fb_var_screeninfo *var);
generated by cgit v1.2.2 (git 2.25.0) at 2025-09-09 06:40:29 -0400