aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw
Commit message (Collapse)AuthorAge
* RDMA/cxgb3: Fix regression caused by class_device -> device conversionSteve Wise2008-07-08
| | | | | | | | | | | | The change to iwch_provider.c in commit f4e91eb4 ("IB: convert struct class_device to struct device") undid the fix done in commit 7f049f2f ("RDMA/cxgb3: Hold rtnl_lock() around ethtool get_drvinfo call"). It removed the calls to rtnl_lock() that serialized the iw_cxgb3 ethtool ops calls into the cxgb3 driver. This locking is needed to avoid messing up the internal state of the cxgb3 driver. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mthca: Clear ICM pages before handing to FWEli Cohen2008-06-23
| | | | | | | | | | | | | | | | | | Current memfree FW has a bug which in some cases, assumes that ICM pages passed to it are cleared. This patch uses __GFP_ZERO to allocate all ICM pages passed to the FW. Once firmware with a fix is released, we can make the workaround conditional on firmware version. This fixes the bug reported by Arthur Kepner <akepner@sgi.com> here: http://lists.openfabrics.org/pipermail/general/2008-May/050026.html Cc: <stable@kernel.org> Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Rewritten to be a one-liner using __GFP_ZERO instead of vmap()ing ICM memory and memset()ing it to 0. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Fix off-by-one in nes_reg_user_mr() error pathRoland Dreier2008-06-10
| | | | | | | | | | | | | | | | nes_reg_user_mr() should fail if page_count becomes >= 1024 * 512 rather than just testing for strict >, because page_count is essentially used as an index into an array with 1024 * 512 entries, so allowing the loop to continue with page_count == 1024 * 512 means that memory after the end of the array is corrupted. This leads to a crash triggerable by a userspace application that requests registration of a too-big region. Also get rid of the call to pci_free_consistent() here to avoid corrupting state with a double free, since the same memory will be freed in the code jumped to at reg_user_mr_err. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/core: Remove IB_DEVICE_SEND_W_INV capability flagRoland Dreier2008-06-09
| | | | | | | | | | | | | | | | | | In 2.6.26, we added some support for send with invalidate work requests, including a device capability flag to indicate whether a device supports such requests. However, the support was incomplete: the completion structure was not extended with a field for the key contained in incoming send with invalidate requests. Full support for memory management extensions (send with invalidate, local invalidate, fast register through a send queue, etc) is planned for 2.6.27. Since send with invalidate is not very useful by itself, just remove the IB_DEVICE_SEND_W_INV bit before the 2.6.26 final release; we will add an IB_DEVICE_MEM_MGT_EXTENSIONS bit in 2.6.27, which makes things simpler for applications, since they will not have quite as confusing an array of fine-grained bits to check. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix SM trap forwardingRalph Campbell2008-06-06
| | | | | | | | | SM/SMA traps received by the ipath driver should be forwarded to the SM if it is running on the host. The ib_ipath driver was incorrectly replying with "bad method." Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ehca: Reject send WRs only for RESET, INIT and RTR stateJoachim Fenkes2008-06-06
| | | | | Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix device capability flagsRalph Campbell2008-05-26
| | | | | | | | | The driver supports a few features (RNR NAK, port active event, SRQ resize) that were not reported in the device capability flags. This patch fixes that. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Avoid test_bit() on u64 SDMA status valueRoland Dreier2008-05-26
| | | | | | | | | | | | | | | | | | | Gabriel C <nix.or.die@googlemail.com> pointed out that when the x86 bitops are updated to operate on unsigned long, the code in sdma_abort_task() will produce warnings: drivers/infiniband/hw/ipath/ipath_sdma.c: In function 'sdma_abort_task': drivers/infiniband/hw/ipath/ipath_sdma.c:267: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type and so on, because it uses test_bit() to operation on a u64 value (returned by ipath_read_kref64() for a hardware register). Fix up these warnings by converting the test_bit() operations to &ing with appropriate symbolic defines of the bits within the hardware register. This has the benign side-effect of making the code more self-documenting as well. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mlx4: Fix creation of kernel QP with max number of send s/g entriesRoland Dreier2008-05-20
| | | | | | | | | | | | | | | | | | When creating a kernel QP where the consumer asked for a send queue with lots of scatter/gater entries, set_kernel_sq_size() incorrectly returned an error if the send queue stride is larger than the hardware's maximum send work request descriptor size. This is not a problem; the only issue is to make sure that the actual descriptors used do not overflow the maximum descriptor size, so check this instead. Clamp the returned max_send_sge value to be no bigger than what query_device returns for the max_sge to avoid confusing hapless users, even if the hardware is capable of handling a few more s/g entries. This bug caused NFS/RDMA mounts to fail when the server adapter used the mlx4 driver. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mthca: Fix max_sge value returned by query_deviceRoland Dreier2008-05-16
| | | | | | | | | | | | | | | | | | The mthca driver returns the maximum number of scatter/gather entries returned by the firmware as the max_sge value when device properties are queried. However, the firmware also reports a limit on the maximum descriptor size allowed, and because mthca takes into account the worst case send request overhead when checking whether to allow a QP to be created, the largest number of scatter/gather entries that can be used with mthca may be limited by the maximum descriptor size rather than just by the actual s/g entry limit. This means that applications cannot actually create QPs with max_send_sge equal to the limit returned by ib_query_device(). Fix this by checking if the maximum descriptor size imposes a lower limit and if so returning that lower limit. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/cxgb3: Fix uninitialized variable warning in iwch_post_send()Roland Dreier2008-05-16
| | | | | | | | | | | drivers/infiniband/hw/cxgb3/iwch_qp.c: In function 'iwch_post_send': drivers/infiniband/hw/cxgb3/iwch_qp.c:232: warning: 't3_wr_flit_cnt' may be used uninitialized in this function This is what akpm describes as "the dopey gcc-doesn't-know-that-foo(&var)-writes-to-var problem." Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Steve Wise <swise@opengridcomputing.com>
* IB/mlx4: Fix uninitialized-var warning in mlx4_ib_post_send()Andrew Morton2008-05-16
| | | | | | | | | | drivers/infiniband/hw/mlx4/qp.c: In function 'mlx4_ib_post_send': drivers/infiniband/hw/mlx4/qp.c:1460: warning: 'seglen' may be used uninitialized in this function This is the dopey gcc-doesn't-know-that-foo(&var)-writes-to-var problem. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix UC receive completion opcode for RDMA WRITE with immediateRalph Campbell2008-05-15
| | | | | | | | | | When I fixed the RC receive completion opcode in 2bfc8e9e ("IB/ipath: Return the correct opcode for RDMA WRITE with immediate"), I forgot to fix UC, which had the same problem for RDMA write with immediate returning the wrong opcode. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix printk format for ipath_sdma_statusRoland Dreier2008-05-15
| | | | | | | | | | | | | | | | | Commit f018c7e1 ("IB/ipath: Change ipath_devdata.ipath_sdma_status to be unsigned long") changed ipath_sdma_status to be unsigned long, but left a few debug messages that printed it out with a %016llx format, which generates the warnings drivers/infiniband/hw/ipath/ipath_sdma.c:348: warning: format '%016llx' expects type 'long long unsigned int', but argument 3 has type 'long unsigned int' drivers/infiniband/hw/ipath/ipath_sdma.c:618: warning: format '%016llx' expects type 'long long unsigned int', but argument 3 has type 'long unsigned int' Fix this by changing the format used to print out the value to %08lx (8 hex digits are now sufficient, because the highest bit used is 31). Warnings reported by Randy Dunlap <randy.dunlap@oracle.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/cxgb3: Wrap the software send queue pointer as needed on flushSteve Wise2008-05-13
| | | | | | | | cxio_flush_sq() was failing to wrap around the software send queue causing garbage completion entries on a flush operation. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Change ipath_devdata.ipath_sdma_status to be unsigned longRoland Dreier2008-05-13
| | | | | | | | | | | | | | | Andrew Morton <akpm@linux-foundation.org> pointed out that bitops should take an unsigned long * arg. However, the ipath driver was doing bitops on struct ipath_devdata.ipath_sdma_status, which is u64. Change this member to unsigned long to avoid tons of warnings when x86 fixes the bitops to take unsigned long * instead of void *. Also, change the IPATH_SDMA_RUNNING and IPATH_SDMA_SHUTDOWN bit numbers to 30 and 31 (instead of 62 and 63) so that we're not setting another booby trap for someone who tries to make ipath work on a 32-bit architecture. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Make ipath_portdata work with struct pid * not pid_tPavel Emelyanov2008-05-13
| | | | | | | | | | | | | | | | | | | | | | | | The official reason is "with the presence of pid namespaces in the kernel using pid_t-s inside one is no longer safe." But the reason I fix this right now is the following: About a month ago (when 2.6.25 was not yet released) there still was a one last caller of a to-be-deprecated-soon function find_pid() - the kill_proc() function, which in turn was only used by nfs callback code. During the last merge window, this last caller was finally eliminated by some NFS patch(es) and I was about to finally kill this kill_proc() and find_pid(), but found, that I was late and the kill_proc is now called from the ipath driver since commit 58411d1c ("IB/ipath: Head of Line blocking vs forward progress of user apps"). So here's a patch that fixes this code to use struct pid * and (!) the kill_pid routine. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix RDMA read response sequence checkingRalph Campbell2008-05-13
| | | | | | | | | | If an out of sequence RDMA read response middle or last packet is received, we should only resend the RDMA read request on the first out of sequence packet and drop subsequent out of sequence packets otherwise, we get "too many retries". Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix many locking issues when switching to error stateRalph Campbell2008-05-13
| | | | | | | | | | The send DMA hardware queue voided a number of prior assumptions about when a send is complete which led to completions being generated out of order. There were also a number of locking issues when switching the QP to the error or reset states, and we implement the IB_QPS_SQD state. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix RC and UC error handlingRalph Campbell2008-05-13
| | | | | | | | | | When errors are detected in RC, the QP should transition to the IB_QPS_ERR state, not the IB_QPS_SQE state. Also, when the error is on the responder side, the receive work completion error was incorrect (remote vs. local). Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Fix up nes_lro_max_aggr module parameterRoland Dreier2008-05-13
| | | | | | | | | | | | | | | | | | | | Fix some bugs with the max_aggr module parameter added with LRO support: - The module parameter value ignored and not actually used to set lro_mgr.max_aggr. - MODULE_PARM_DESC had a typo "_mro_" instead of "_lro_" so it didn't end up describing the actual module parameter. - The nes_lro_max_aggr variable was declared as unsigned, but the module_param line said "int" instead of "uint" for the type. - The default value for the parameter was stuck in the permissions field of module_param, which led to nonsensical permissions for the file under /sys/module/iw_nes/param. - The parameter was used in only one file but defined in another, which led to the variable being global for no good reason. Move everything related to the parameter to the file nes_hw.c where it is actually used. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ehca: Wait for async events to finish before destroying QPStefan Roscher2008-05-07
| | | | | | | | This is necessary because, in a multicore environment, a race between uverbs async handler and destroy QP could occur. Signed-off-by: Stefan Roscher <stefan.roscher at de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix SDMA error recovery in absence of link status changeJohn Gregor2008-05-07
| | | | | | | | | | | | | | | | | | | | | | | | What's fixed: in ipath_cancel_sends() We need to unconditionally set ABORTING. So, swap the tests so the set_bit() isn't shadowed by the &&. If we've disarmed the piobufs, then we need to unconditionally set DISARMED. So, move it out from the overly protective if at the bottom. in sdma_abort_task() Abort_task was written knowing that the SDMA engine would always be reset (and restarted) on error. A recent change broke that fundamental assumption by taking the restart portion and making it conditional on a link status change. But, SDMA can go boom without a link status change in some conditions. Signed-off-by: John Gregor <john.gregor@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Need to always request and handle PIO avail interruptsDave Olson2008-05-07
| | | | | | | | | | | | | | | | | | | | | | | | Now that we always use PIO for vl15 on 7220, we could get stuck forever if we happened to run out of PIO buffers from the verbs code, because the setup code wouldn't run; the interrupt was also ignored if SDMA was supported. We also have to reduce the pio update threshold if we have fewer kernel buffers than the existing threshold. Clean up the initialization a bit to get ordering safer and more sensible, and use the existing ipath_chg_kernavail call to do init, rather than doing it separately. Drop unnecessary clearing of pio buffer on pio parity error. Drop incorrect updating of pioavailshadow when exitting freeze mode (software state may not match chip state if buffer has been allocated and not yet written). If we couldn't get a kernel buffer for a while, make sure we are in sync with hardware, mainly to handle the exitting freeze case. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix count of packets received by kernelMichael Albaugh2008-05-07
| | | | | | | | | | | The loop in ipath_kreceive() that processes packets increments the loop-index 'i' once too often, because the exit condition does not depend on it, and is checked after the increment. By adding a check for !last to the iterator in the for loop, we correct that in a way that is not so likely to be re-broken by changes in the loop body. Signed-off-by: Michael Albaugh <micheal.albaugh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Return the correct opcode for RDMA WRITE with immediateRalph Campbell2008-05-07
| | | | | | | | This patch fixes a bug in the RC responder which generates a completion entry with the wrong opcode when an RDMA WRITE with immediate is received. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix bug that can leave sends disabled after freeze recoveryDave Olson2008-05-07
| | | | | | | | | The semantics of cancel_sends changed, but the code using it was missed. Don't leave sends and pioavail updates disabled, and add a comment as to why the force update is needed. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Only increment SSN if WQE is put on send queueRalph Campbell2008-05-07
| | | | | | | | | | If a send work request has immediate errors and is not put on the send queue, we shouldn't update any of the QP state. The increment of the SSN wasn't obeying this. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Only warn about prototype chip during initMichael Albaugh2008-05-07
| | | | | | | | | | | We warn about prototype chips, but the function that checks for support is also called as a result of a get_portinfo request, which can clutter the logs. Restrict warning to only appear during initialization. Signed-off-by: Michael Albaugh <michael.albaugh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/cxgb3: Fix severe limit on userspace memory registration sizeRoland Dreier2008-05-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, iw_cxgb3 is severely limited on the amount of userspace memory that can be registered in in a single memory region, which causes big problems for applications that expect to be able to register 100s of MB. The problem is that the driver uses a single kmalloc()ed buffer to hold the physical buffer list (PBL) for the entire memory region during registration, which means that 8 bytes of contiguous memory are required for each page of memory being registered. For example, a 64 MB registration will require 128 KB of contiguous memory with 4 KB pages, and it unlikely that such an allocation will succeed on a busy system. This is purely a driver problem: the temporary page list buffer is not needed by the hardware, so we can fix this by writing the PBL to the hardware in page-sized chunks rather than all at once. We do this by splitting the memory registration operation up into several steps: - Allocate PBL space in adapter memory for the full registration - Copy PBL to adapter memory in chunks - Allocate STag and enable memory region This also allows several other cleanups to the __cxio_tpt_op() interface and related parts of the driver. This change leaves the reregister memory region and memory window operations broken, but they already didn't work due to other longstanding bugs, so fixing them will be left to a later patch. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/cxgb3: Don't add PBL memory to gen_pool in chunksRoland Dreier2008-05-06
| | | | | | | | | | | | | | | Current iw_cxgb3 code adds PBL memory to the driver's gen_pool in 2 MB chunks. This limits the largest single allocation that can be done to the same size, which means that with 4 KB pages, each of which takes 8 bytes of PBL memory, the largest memory region that can be allocated is 1 GB (256K PBL entries * 4 KB/entry). Remove this limit by adding all the PBL memory in a single gen_pool chunk, if possible. Add code that falls back to smaller chunks if gen_pool_add() fails, which can happen if there is not sufficient contiguous lowmem for the internal gen_pool bitmap. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ehca: Fix function return typesStefan Roscher2008-05-05
| | | | | | | | Also remove duplicate assignment of local_ca_ack_delay and change min_t check for local_ca_ack_delay to u8 instead of int. Signed-off-by: Stefan Roscher <stefan.roscher at de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/cxgb3: Bump up the MPA connection setup timeout.Steve Wise2008-05-02
| | | | | | | Testing on large clusters shows its way too short at 10 secs. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/cxgb3: Silently ignore close reply after abort.Steve Wise2008-05-02
| | | | | | | | | | | | | | | | | Remove bad BUG_ON() that can trigger in correct operation from close_con_rpl(). It is possible to get a close_rpl message on a dead connection. The sequence is: - host refs ep for close exchange - host posts close_req - hw posts PEER_ABORT from incoming RST - host marks ep DEAD - host posts ABORT_RPL and releases ep resources - hw posts CLOSE_RPL - host derefs ep and ep freed. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/cxgb3: QP flush fixesSteve Wise2008-05-02
| | | | | | | | | | | | - Flush the QP only after the HW disables the connection. Currently we flush the QP when transitioning to CLOSING. This exposes a race condition where the HW can complete a RECV WR, for instance, -and- the SW can flush that same WR. - Only call CQ event handlers on flush IFF we actually flushed something. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mlx4: Fix off-by-one errors in calls to mlx4_ib_free_cq_buf()Roland Dreier2008-04-30
| | | | | | | | | | | | | | | When I merged bbf8eed1 ("IB/mlx4: Add support for resizing CQs") I changed things around so that mlx4_ib_alloc_cq_buf() and mlx4_ib_free_cq_buf() were used everywhere they could be. However, I screwed up the number of entries passed into mlx4_ib_alloc_cq_buf() in a couple places -- the function bumps the number of entries internally, so the caller shouldn't add 1 as well. Passing a too-big value for the number of entries to mlx4_ib_free_cq_buf() can cause the cleanup to go off the end of an array and corrupt allocator state in interesting ways. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Formatting cleanupGlenn Streiff2008-04-29
| | | | | | | | | | | | Various cleanups: - Change // to /* .. */ - Place whitespace around binary operators. - Trim down a few long lines. - Some minor alignment formatting for better readability. - Remove some silly tabs. Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Add support for SFP+ PHYEric Schneider2008-04-29
| | | | | | | | | This patch enables the iw_nes module for NetEffect RNICs to support additional PHYs including SFP+ (referred to as ARGUS in the code). Signed-off-by: Eric Schneider <eric.schneider@neteffect.com> Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Use LROFaisal Latif2008-04-29
| | | | | | Signed-off-by: Faisal Latif <flatif@neteffect.com. Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mthca: Avoid changing userspace ABI to handle DMA write barrier attributeRoland Dreier2008-04-29
| | | | | | | | | | | | | | | | | | Commit cb9fbc5c ("IB: expand ib_umem_get() prototype") changed the mthca userspace ABI to provide a way for userspace to indicate which memory regions need the DMA write barrier attribute. However, it is possible to handle this without breaking existing userspace, by having the mthca kernel driver recognize whether it is talking to old or new userspace, depending on the size of the register MR structure passed in. The only potential drawback of this is that is allows old userspace (which has a bug with DMA ordering on large SGI Altix systems) to continue to run on new kernels, but the advantage of allowing old userspace to continue to work on unaffected systems seems to outweigh this, and we can print a warning to push people to upgrade their userspace. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mthca: Avoid recycling old FMR R_Keys too soonOlaf Kirch2008-04-29
| | | | | | | | | | | | | | | | | | | | | | | When a FMR is unmapped, mthca resets the map count to 0, and clears the upper part of the R_Key which is used as the sequence counter. This poses a problem for RDS, which uses ib_fmr_unmap as a fence operation. RDS assumes that after issuing an unmap, the old R_Keys will be invalid for a "reasonable" period of time. For instance, Oracle processes uses shared memory buffers allocated from a pool of buffers. When a process dies, we want to reclaim these buffers -- but we must make sure there are no pending RDMA operations to/from those buffers. The only way to achieve that is by using unmap and sync the TPT. However, when the sequence count is reset on unmap, there is a high likelihood that a new mapping will be given the same R_Key that was issued a few milliseconds ago. To prevent this, don't reset the sequence count when unmapping a FMR. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ehca: Allocate event queue size depending on max number of CQs and QPsStefan Roscher2008-04-29
| | | | | | | | | | | | | | If a lot of QPs fall into Error state at once and the EQ of the respective HCA is too small, it might overrun, causing the eHCA driver to stop processing completion events and calling the application's completion handlers, effectively causing traffic to stop. Fix this by limiting available QPs and CQs to a customizable max count, and determining EQ size based on these counts and a worst-case assumption. Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ehca: handle negative return value from ibmebus_request_irq() properlyHoang-Nam Nguyen2008-04-29
| | | | | | | | | | | | ehca_create_eq() was assigning a signed return value to an unsiged local variable and then checking if the variable was < 0, which meant that errors were always ignored. Fix this by using one variable for signed integer return values and another for u64 hcall return values. Bug originally found by Roel Kluin <12o3l@tiscali.nl>. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/cxgb3: Support peer-2-peer connection setupSteve Wise2008-04-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Open MPI, Intel MPI and other applications don't respect the iWARP requirement that the client (active) side of the connection send the first RDMA message. This class of application connection setup is called peer-to-peer. Typically once the connection is setup, _both_ sides want to send data. This patch enables supporting peer-to-peer over the chelsio RNIC by enforcing this iWARP requirement in the driver itself as part of RDMA connection setup. Connection setup is extended, when the peer2peer module option is 1, such that the MPA initiator will send a 0B Read (the RTR) just after connection setup. The MPA responder will suspend SQ processing until the RTR message is received and reply-to. In the longer term, this will be handled in a standardized way by enhancing the MPA negotiation so peers can indicate whether they want/need the RTR and what type of RTR (0B read, 0B write, or 0B send) should be sent. This will be done by standardizing a few bits of the private data in order to negotiate all this. However this patch enables peer-to-peer applications now and allows most of the required firmware and driver changes to be done and tested now. Design: - Add a module option, peer2peer, to enable this mode. - New firmware support for peer-to-peer mode: - a new bit in the rdma_init WR to tell it to do peer-2-peer and what form of RTR message to send or expect. - process _all_ preposted recvs before moving the connection into rdma mode. - passive side: defer completing the rdma_init WR until all pre-posted recvs are processed. Suspend SQ processing until the RTR is received. - active side: expect and process the 0B read WR on offload TX queue. Defer completing the rdma_init WR until all pre-posted recvs are processed. Suspend SQ processing until the 0B read WR is processed from the offload TX queue. - If peer2peer is set, driver posts 0B read request on offload TX queue just after posting the rdma_init WR to the offload TX queue. - Add CQ poll logic to ignore unsolicitied read responses. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/cxgb3: Set the max_mr_size device attribute correctlySteve Wise2008-04-29
| | | | | | | | cxgb3 only supports 4GB memory regions. The lustre RDMA code uses this attribute and currently has to code around our bad setting. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/cxgb3: Correctly serialize peer abort pathSteve Wise2008-04-29
| | | | | | | | | | | | | | | | | | | | Open MPI and other stress testing exposed a few bad bugs in handling aborts in the middle of a normal close. Fix these by: - serializing abort reply and peer abort processing with disconnect processing - warning (and ignoring) if ep timer is stopped when it wasn't running - cleaning up disconnect path to correctly deal with aborting and dead endpoints - in iwch_modify_qp(), taking a ref on the ep before releasing the qp lock if iwch_ep_disconnect() will be called. The ref is dropped after calling disconnect. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* mlx4_core: Add a way to set the "collapsed" CQ flagYevgeny Petrilin2008-04-29
| | | | | | | | Extend the mlx4_cq_resize() API with a way to set the "collapsed" flag for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB: expand ib_umem_get() prototypeArthur Kepner2008-04-29
| | | | | | | | | | | | | | | | | | | Add a new parameter, dmasync, to the ib_umem_get() prototype. Use dmasync = 1 when mapping user-allocated CQs with ib_umem_get(). Signed-off-by: Arthur Kepner <akepner@sgi.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Jes Sorensen <jes@sgi.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: David Miller <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* RDMA/nes: Remove volatile qualifier from struct nes_hw_cq.cq_vbaseRoland Dreier2008-04-23
| | | | | | | | | | | | | | | | | | | | | | | | Remove the volatile qualifier from the cq_vbase member of struct nes_hw_cq, and add an rmb() in the one place where it looks like access order might make a difference. As usual, removing a volatile qualifier in a declaration is actually a bug fix, since a volatile qualifier is not sufficient to make sure that aggressively out-of-order CPUs don't reorder things and cause incorrect results. For example, a CPU might speculatively execute reads of other cqe fields before the NIC hardware has written those fields and before it has set the NES_CQE_VALID bit (even though those reads come after the test of the NES_CQE_VALID bit in program order), but then when the CPU actually executes the conditional test of the NES_CQE_VALID, the bit has been set, and the CPU will proceed with the results of the earlier speculative execution and end up using bogus data. This also gets rid of the warning: drivers/infiniband/hw/nes/nes_verbs.c: In function 'nes_destroy_cq': drivers/infiniband/hw/nes/nes_verbs.c:1978: warning: passing argument 3 of 'pci_free_consistent' discards qualifiers from pointer target type Signed-off-by: Roland Dreier <rolandd@cisco.com>
* mlx4_core: Move kernel doorbell management into coreYevgeny Petrilin2008-04-23
| | | | | | | | | In addition to mlx4_ib, there will be ethernet and FC consumers of mlx4_core, so move the code for managing kernel doorbells into the core module to avoid having to duplicate this multiple times. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-23 23:09:08 -0500