aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ieee1394/ohci1394.c
Commit message (Collapse)AuthorAge
* ieee1394: ohci1394: Fix mistake in printk message.Simon Arlott2007-04-29
| | | | | | | | Fix the "attempting to setting" message in ohci1394. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: ohci1394: remove unnecessary rcvPhyPkt bit flipping in LinkControl ↵Bernhard Kauer2007-04-29
| | | | | | | | | | register Remove the unneeded code that clears, sets and again clears the rcvPhyPkt bit in the ohci1394 LinkControl register in ohci_initialize(). Signed-off-by: Bernhard Kauer <kauer@os.inf.tu-dresden.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: ohci1394: fix cosmetic problem in error loggingStefan Richter2007-04-29
| | | | | | | If posted write failed, an "Unhandled interrupt(s) 0x00000100" message was logged by mistake. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: move some comments from declaration to definitionStefan Richter2007-04-29
| | | | Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* Storage class should be before const qualifierTobias Klauser2007-02-17
| | | | | | | | | | | The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] remove many unneeded #includes of sched.hTim Schmielau2007-02-14
| | | | | | | | | | | | | | | | | | | | | | | | After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ieee1394: restore config ROM when resumingStefan Richter2007-02-08
| | | | | | | After PM suspend + resume, the local configuration ROM was not restored. This prevented remote nodes from recognizing the resuming machine. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: ohci1394: drop pcmcia-cs compatibility codeStefan Richter2007-02-08
| | | | | | #ifdef PCMCIA is only true if compiled inside pcmcia-cs, isn't it? Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* Add PCI class ID for firewire OHCI controllers.Kristian Høgsberg2007-02-08
| | | | | | | Pull this define out of drivers/ieee1394/ohci1394.c and rename to match other PCI class defines. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: ohci1394: call PMac code in shutdown only for proper machinesStefan Richter2006-12-07
| | | | | | There has been an if(...) missing, for ages. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: ohci1394: reformat PPC_PMAC platform codeStefan Richter2006-12-07
| | | | | | Adjust whitespace and line lengths Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: ohci1394: add PPC_PMAC platform code to driver probeStefan Richter2006-12-07
| | | | | | | | Fixes http://bugzilla.kernel.org/show_bug.cgi?id=7431 iBook G3 threw a machine check exception and put the display backlight to full brightness after ohci1394 was unloaded and reloaded. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ohci1394: shortcut irq printingAlexey Dobriyan2006-12-07
| | | | | | | To print irq number no need to transform to string using %d, then print using %s. Just use %d. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
* ieee1394: ohci1394: proper log messages in suspend and resumeStefan Richter2006-12-07
| | | | | | | | | | - correct thinko in one of my last commits: cannot use PRINT macro with ohci == NULL - add log messages on ohci == NULL and on pci_enable_device != 0 - update log macros from patch "revert fail on error in suspend" to use PRINT and DBGMSG where possible Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: ohci1394: revert fail on error in suspendStefan Richter2006-12-07
| | | | | | | | Some errors during preparation for suspended state can be skipped with a warning instead of a failure of the whole suspend transition, notably an error in pci_set_power_state. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: ohci1394: suspend/resume cosmeticsStefan Richter2006-12-07
| | | | | | | Reorder the definitions of ohci1394_pci_suspend and _resume. Remove redundant comments. Beautify return statements. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ohci1394: steps to implement suspend/resumeBernhard Kaindl2006-12-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I did a quick shot on what I described and the appended patch does the first thing needed for working suspend/resume in ohci1394 which is HW de- and re-initialisation. It works with suspend2disk on my Ricoh R5C552 IEEE 1394 Controller with the 2.6.17 kernel to the extent that if I call dvgrab --interactive after suspend2disk without unloading ohci1394, it does not lock up dvgrab with 100% CPU but properly connects to the camera, given that I first unplug and plug the camera after coming back from suspend. I guess that could be fixed by forcing a bus reset in the resume function. I cannot test suspend to RAM here at the moment and should follow the guidelines in Documentation/power/pci.txt also, so this is rather a quick report than a finished patch and there are some rough edges: However, with this patch, I have to unload at least some in-kernel users of ohci1394 like dv1394 or video1394 before suspending. Not doing that caused an Oops and a bad tasklet error, probably from not handling ISO tasklets during suspend/resume properly. Maybe these can be temporarily cleared or unregistered and re-registered for suspend/resume with help from the other layers or from the highlevel 1394 core, but I do not really know what these do. But this patch provides a useful base to start from and is already of much help for people which do not need dv1394 and video1394 or can unload them at least during suspend. I cannot test function with sbp2 at the moment, but raw1394 seems to work fine. Signed-off-by: Bernhard Kaindl <bk@fsfe.org> Update 1: merge with previous two ohci1394 suspend/resume patches Update 2: version for application on top of Linux 2.6.19-rc4 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* [PATCH] slab: remove SLAB_KERNELChristoph Lameter2006-12-07
| | | | | | | | SLAB_KERNEL is an alias of GFP_KERNEL. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* ieee1394: ohci1394: revert fail on error in suspendStefan Richter2006-10-29
| | | | | | | | Some errors during preparation for suspended state can be skipped with a warning instead of a failure of the whole suspend transition, notably an error in pci_set_power_state. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* ieee1394: ohci1394: check for errors in suspend or resumeStefan Richter2006-09-17
| | | | | | | Some of the suspend and resume litany may fail. Tell the PCI core about it. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* set power state of firewire host during suspendPavel Machek2006-09-17
| | | | | | | | | | | | | Put firewire host controller in PCI Dx state for system suspend. (I was not able to measure any power savings, but it sounds like right thing to do, anyway.) Signed-off-by: Pavel Machek <pavel@suse.cz> Update by stefanr: Shuffle with existing PPC_PMAC code. Set power state in the resume hook too. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: ohci1394: more obvious endianess handlingStefan Richter2006-09-17
| | | | | | | | Rename ohci1394's packet_swab to header_le32_to_cpu to better reflect what it actually does. Also, define a constant array as 'const' and check the array index properly. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: ohci1394: fix endianess bug in debug messageStefan Richter2006-09-17
| | | | | | | | | The transaction labels were misprinted int the debug printk "Packet received from node..." due two byte-swapping once too often. Affected were big endian machines, except UniNorth based ones. Fix tested by Wolfgang Pfeiffer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* CONFIG_PM=n slim: drivers/ieee1394/ohci1394.cAlexey Dobriyan2006-09-17
| | | | | | | | Remove some code which is unneeded if CONFIG_PM=n. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: safer definition of empty macrosStefan Richter2006-09-17
| | | | | | | | | A deactivated macro, defined as "#define foo(bar)", will result in silent corruption if somebody forgets a semicolon after a call to foo. Replace it by "#define foo(bar) do {} while (0)" which will reveal any respective syntax errors. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* Initialize ieee1394 early when built inAndi Kleen2006-09-17
| | | | | | | | | | | | This makes debugging with firescope easier. Signed-off-by: Andi Kleen <ak@suse.de> (original patch) Update: - no need for #ifdef MODULE - add comment in ieee1394_core, more verbose comment in ohci1394 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (update)
* ieee1394: merge from LinusStefan Richter2006-09-17
|\ | | | | | | | | | | | | | | Conflicts: drivers/ieee1394/hosts.c Patch "lockdep: annotate ieee1394 skb-queue-head locking" was meddling with patch "ieee1394: fix kerneldoc of hpsb_alloc_host". Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * [PATCH] 1394: fix for recently added firewire patch that breaks things on ppcDanny Tholen2006-08-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently a patch was added for preliminary suspend/resume handling on !PPC_PMAC. However, this broke both suspend and firewire on powerpc because it saves the pci state after the device has already been disabled. This moves the save state to before the pmac specific code. Signed-off-by: Danny Tholen <obiwan@mailmij.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ben Collins <bcollins@ubuntu.com> Cc: Jody McIntyre <scjody@modernduck.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] ieee1394: replace __inline__ by inlineStefan Richter2006-07-03
|/ | | | | Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
* [PATCH] irq-flags: firewire: Use the new IRQF_ constantsThomas Gleixner2006-07-02
| | | | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jody McIntyre <scjody@modernduck.com> Cc: Ben Collins <bcollins@debian.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-30
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] 64bit Resource: convert a few remaining drivers to use ↵Greg Kroah-Hartman2006-06-27
| | | | | | | | | | resource_size_t where needed Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] 64bit resource: fix up printks for resources in misc driversGreg Kroah-Hartman2006-06-27
| | | | | | | | | | This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/bcollins/linux1394-2.6Linus Torvalds2006-06-20
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bcollins/linux1394-2.6: (28 commits) eth1394: replace __constant_htons by htons ieee1394: adjust code formatting in highlevel.c ieee1394: hl_irqs_lock is taken in hardware interrupt context ieee1394_core: switch to kthread API ieee1394: sbp2: Kconfig fix ieee1394: add preprocessor constant for invalid csr address sbp2: fix deregistration of status fifo address space [PATCH] eth1394: endian fixes Fix broken suspend/resume in ohci1394 sbp2: use __attribute__((packed)) for on-the-wire structures sbp2: provide helptext for CONFIG_IEEE1394_SBP2_PHYS_DMA and mark it experimental Update feature removal of obsolete raw1394 ISO requests. sbp2: fix S800 transfers if phys_dma is off sbp2: remove ohci1394 specific constant ohci1394: make phys_dma parameter read-only ohci1394: set address range properties ieee1394: extend lowlevel API for address range properties sbp2: log number of supported concurrent logins sbp2: remove manipulation of inquiry response ieee1394: save RAM by using a single tlabel for broadcast transactions ...
| * Fix broken suspend/resume in ohci1394Ben Collins2006-06-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I've been experimenting to track down the cause of suspend/resume problems on my Compaq Presario X1050 laptop: http://bugzilla.kernel.org/show_bug.cgi?id=6075 Essentially the ACPI Embedded Controller and keyboard controller would get into a bizarre, confused state after resume. I found that unloading the ohci1394 module before suspend and reloading it after resume made the problem go away. Diffing the dmesg output from resume, with and without the module loaded, I found that with the module loaded I was missing these: PM: Writing back config space on device 0000:02:00.0 at offset 1. (Was 2100080, writing 2100007) PM: Writing back config space on device 0000:02:00.0 at offset 3. (Was 0, writing 8008) PM: Writing back config space on device 0000:02:00.0 at offset 4. (Was 0, writing 90200000) PM: Writing back config space on device 0000:02:00.0 at offset 5. (Was 1, writing 2401) PM: Writing back config space on device 0000:02:00.0 at offset f. (Was 20000100, writing 2000010a) The default PCI driver performs the pci_restore_state when no driver is loaded for the device. When the ohci1394 driver is loaded, it is supposed to do this, however it appears not to do so. I created the patch below and tested it, and it appears to resolve the suspend problems I was having with the module loaded. I only added in the pci_save_state and pci_restore_state - however, though I know little of this hardware, surely the driver should really be doing more than this when suspending and resuming? Currently it does almost nothing, what if there are commands in progress, etc? Signed-off-by: Robert Hancock <hancockr@shaw.ca> Cc: Jody McIntyre <scjody@modernduck.com> Cc: Ben Collins <bcollins@debian.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
| * ohci1394: make phys_dma parameter read-onlyBen Collins2006-06-12
| | | | | | | | | | | | | | | | | | Being able to switch physical DMA on and off at run time would be a nice feature but a PITA to support by highlevel drivers and userspace apps. Therefore allow it only to be set when the driver is being loaded. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
| * ohci1394: set address range propertiesBen Collins2006-06-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch supplies the API extension introduced by patch "ieee1394: extend lowlevel API for address range properties" with proper addresses. Like in patch ''ohci1394, sbp2: fix "scsi_add_device failed" with PL-3507 based devices'', 1 TeraByte is chosen as physical upper bound. This leaves a window for the middle address range. This choice is only relevant for adapters which actually have a programmable pysical upper bound register. (Only ALi and Fujitsu adapters are known for this. Most adapters have a fixed bound at 4 GB.) The middle address range is suitable for posted writes. AFAIK, PCILynx does not support physical DMA nor posted writes, therefore no equivalent change in the pcilynx driver is necessary. There is also a driver for GP2Lynx, although not in mainline Linux. I assume this hardware does not support these OHCI features either. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
| * ieee1394/ohci1394: CycleTooLong interrupt managementBen Collins2006-06-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch modifies the ohci1394.c file to enable and manage the "cycle too long" interrupt. If this interrupt occurs, the "LinkControl.CycleMaster" bit of the host controller is reseted. This implies, that the host controller does not send "cycle start" packet anymore freezing then the isochronous communication. The management of the interrupt added by the patch is that when the interrupt occurs, the OHCI irq handler prints a kernel log warning and then sets the "LinkControl.CycleMaster" bit again resuming the isochronous communication. Signed-off-by: Jean-Baptiste Mur <jeanbaptiste@maunakeatech.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
| * ohci1394: Remove superfluous call to free_dma_rcv_ctx,Ben Collins2006-06-12
| | | | | | | | | | | | | | spotted by Adrian Bunk. Also remove some superfluous comments. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
* | [SPARC]: Kill __irq_itoa().David S. Miller2006-06-20
|/ | | | | | | | | | | | | | | | | | This ugly hack was long overdue to die. It was a way to print out Sparc interrupts in a more freindly format, since IRQ numbers were arbitrary opaque 32-bit integers which vectored into PIL levels. These 32-bit integers were not necessarily in the 0-->NR_IRQS range, but the PILs they vectored to were. The idea now is that we will increase NR_IRQS a little bit and use a virtual<-->real IRQ number mapping scheme similar to PowerPC. That makes this IRQ printing hack irrelevant, and furthermore only a handful of drivers actually used __irq_itoa() making it even less useful. Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] ohci1394, sbp2: fix "scsi_add_device failed" with PL-3507 based devicesStefan Richter2006-05-18
| | | | | | | | | | | | | | | Re-enable posted writes for status FIFO. Besides bringing back a very minor bandwidth tweak from Linux 2.6.15.x and older, this also fixes an interoperability regression since 2.6.16: http://bugzilla.kernel.org/show_bug.cgi?id=6356 (sbp2: scsi_add_device failed. IEEE1394 HD is not working anymore.) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: Vanei Heidemann <linux@javanei.com.br> Tested-by: Martin Putzlocher <mputzi@gmx.de> (chip type unconfirmed) Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds2006-03-29
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (67 commits) [PATCH] powerpc: Remove oprofile spinlock backtrace code [PATCH] powerpc: Add oprofile calltrace support to all powerpc cpus [PATCH] powerpc: Add oprofile calltrace support [PATCH] for_each_possible_cpu: ppc [PATCH] for_each_possible_cpu: powerpc [PATCH] lock PTE before updating it in 440/BookE page fault handler [PATCH] powerpc: Kill _machine and hard-coded platform numbers ppc: Fix compile error in arch/ppc/lib/strcase.c [PATCH] git-powerpc: WARN was a dumb idea [PATCH] powerpc: a couple of trivial compile warning fixes powerpc: remove OCP references powerpc: Make uImage default build output for MPC8540 ADS powerpc: move math-emu over to arch/powerpc powerpc: use memparse() for mem= command line parsing ppc: fix strncasecmp prototype [PATCH] powerpc: make ISA floppies work again [PATCH] powerpc: Fix some initcall return values [PATCH] powerpc: Workaround for pSeries RTAS bug [PATCH] spufs: fix __init/__exit annotations [PATCH] powerpc: add hvc backend for rtas ...
| * [PATCH] powerpc: Kill _machine and hard-coded platform numbersBenjamin Herrenschmidt2006-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes statically assigned platform numbers and reworks the powerpc platform probe code to use a better mechanism. With this, board support files can simply declare a new machine type with a macro, and implement a probe() function that uses the flattened device-tree to detect if they apply for a given machine. We now have a machine_is() macro that replaces the comparisons of _machine with the various PLATFORM_* constants. This commit also changes various drivers to use the new macro instead of looking at _machine. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | ohci1394: cleanup the "Unexpected PCI resource length" warning.Jody McIntyre2006-03-28
| | | | | | | | | | | | | | | | | | | | This warning happens in practice because the resource length reported by the chipset is too large. This is not actually a problem, so don't warn about it. If it happens to be too small, warn about that, but with a different message so people who are used to ignoring the old message don't. Signed-off-by: Jody McIntyre <scjody@modernduck.com>
* | ohci1394: clean up asynchronous and physical request filters programmingStefan Richter2006-03-28
| | | | | | | | | | | | | | | | | | | | Various cleanups of how ohci1394 programs AsynchronousRequestFilter, PhysicalRequestFilter, and physUpperBoundOffset. In particular, do not rewrite registers within the bus reset interrupt handler if bus resets do not affect the registers in the first place. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
* | Signed-off-by: Jody McIntyre <scjody@modernduck.com>Jody McIntyre2006-03-28
|/
* ohci1394: log number of implemented isochronous contextsStefan Richter2005-12-13
| | | | | | | | Print the number of IR and IT contexts which a hardware implements as an informational log message when ohci1394 initializes. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
* kmalloc/kzalloc changes:Stefan Richter2005-11-07
| | | | | | | | | | dv1394, eth1394, ieee1394, ohci1394, pcilynx, raw1394, sbp2c, video1394: - use kzalloc - provide safer size arguments to kmalloc and kzalloc - omit some casts Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
* Remove version strings from eth1394, ohci1394, sbp2.Stefan Richter2005-11-07
| | | | | | | Their version information is not trustworthy. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-21 03:20:22 -0500