aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/i2c
Commit message (Collapse)AuthorAge
* i2c-core: Use per-adapter userspace device listsJean Delvare2010-05-04
| | | | | | | | | | Using a single list for all userspace devices leads to a dead lock on multiplexed buses in some circumstances (mux chip instantiated from userspace). This is solved by using a separate list for each bus segment. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michael Lawnick <ml.lawnick@gmx.de>
* i2c: Fix probing of FSC hardware monitoring chipsJean Delvare2010-05-04
| | | | | | | | | | | | | | | | | | | | | | | Some FSC hardware monitoring chips (Syleus at least) doesn't like quick writes we typically use to probe for I2C chips. Use a regular byte read instead for the address they live at (0x73). These are the only known chips living at this address on PC systems. For clarity, this fix should not be needed for kernels 2.6.30 and later, as we started instantiating the hwmon devices explicitly based on DMI data. Still, this fix is valuable in the following two cases: * Support for recent FSC chips on older kernels. The DMI-based device instantiation is more difficult to backport than the device support itself. * Case where the DMI-based device instantiation fails, whatever the reason. We fall back to probing in that case, so it should work. This fixes kernel bug #15634: https://bugzilla.kernel.org/show_bug.cgi?id=15634 Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@kernel.org
* i2c-core: Erase pointer to clientdata on removalWolfram Sang2010-05-04
| | | | | | | | | | | After discovering that a lot of i2c-drivers leave the pointer to their clientdata dangling, it was decided to let the core handle this issue. It is assumed that the core may access the private data after remove() as there are no guarantees for the lifetime of such pointers anyhow (see thread starting at http://lkml.org/lkml/2010/3/21/68) Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* I2C: Fix section mismatch errors in i2c-octeon.cDavid Daney2010-04-30
| | | | | | | | | | | Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: linux-mips@linux-mips.org Cc: rade.bozic.ext@nsn.com Patchwork: http://patchwork.linux-mips.org/patch/1037/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* i2c-stu300: off by one issueDan Carpenter2010-04-19
| | | | | | | | If we don't find the correct rate, we want to end the loop with "i" pointing to the last element in the array. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
* i2c-pnx: Add stop conditions for end of transferKevin Wells2010-04-19
| | | | | | | | | Add a stop condition bit flag to the last byte in the transfer. This will generate an extra clock to handle the stop condition and prevent devices from staying in an ACK'd state. Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
* i2c-pnx: Limit maximum divider to 1023Kevin Wells2010-04-19
| | | | | | | | | Limit maximum divider to 0x3ff to divider computations. On high I2C parent clock rates, the divider can exceed 0x3ff. This will help prevent some very odd clock rates. Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
* i2c-omap: fix OOPS in omap_i2c_unidle() during probeMika Westerberg2010-04-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit d84d3ea317ce0db89ce0903b4037f800c5d4c477 added register shift to allow also 16-bit register access. However, omap_i2c_unidle() is called before these are set which causes the following OOPS: Unhandled fault: alignment exception (0x801) at 0xfa070009 Internal error: : 801 [#1] last sysfs file: Modules linked in: CPU: 0 Not tainted (2.6.34-rc2-00052-gae6be51 #3) PC is at omap_i2c_unidle+0x44/0x138 LR is at trace_hardirqs_on_caller+0x158/0x18c pc : [<c01cd2c4>] lr : [<c00743f8>] psr: 20000013 sp : cfc2bf10 ip : 00000009 fp : 00000000 r10: 00000000 r9 : 00000000 r8 : c0378560 r7 : c0378b88 r6 : c0378558 r5 : cfcadc00 r4 : cfcadc00 r3 : 00000009 r2 : fa070000 r1 : 00000000 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387f Table: 80004019 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xcfc2a2e8) Stack: (0xcfc2bf10 to 0xcfc2c000) bf00: c0372cf8 c027225c 00000000 c0a69678 bf20: cfc3e508 c0500898 c0378560 c0378560 c0500898 cfcac8c0 c04fc280 c017d4f4 bf40: c0378560 c017c63c c0378560 c0378594 c0500898 cfcac8c0 c04fc280 c017c754 bf60: 00000000 c017c6f4 c0500898 c017beac cfc16a5c cfc3fd94 c0023448 c0500898 bf80: c0500898 c017b7d4 c032dc7f 00000093 cfc28d40 c0023448 00000000 c0500898 bfa0: 00000000 00000000 00000000 c017ca48 c0023448 00000000 c001d274 00000000 bfc0: 00000000 c002b344 00000031 00000000 00000000 00000192 00000000 c0023448 bfe0: 00000000 00000000 00000000 c0008578 00000000 c002c304 ffdfffff ffffffff [<c01cd2c4>] (omap_i2c_unidle+0x44/0x138) from [<c027225c>] (omap_i2c_probe+0x1a4/0x398) [<c027225c>] (omap_i2c_probe+0x1a4/0x398) from [<c017d4f4>] (platform_drv_probe+0x18/0x1c) [<c017d4f4>] (platform_drv_probe+0x18/0x1c) from [<c017c63c>] (driver_probe_device+0xc0/0x178) [<c017c63c>] (driver_probe_device+0xc0/0x178) from [<c017c754>] (__driver_attach+0x60/0x84) [<c017c754>] (__driver_attach+0x60/0x84) from [<c017beac>] (bus_for_each_dev+0x44/0x74) [<c017beac>] (bus_for_each_dev+0x44/0x74) from [<c017b7d4>] (bus_add_driver+0x9c/0x218) [<c017b7d4>] (bus_add_driver+0x9c/0x218) from [<c017ca48>] (driver_register+0xa8/0x130) [<c017ca48>] (driver_register+0xa8/0x130) from [<c002b344>] (do_one_initcall+0x5c/0x1b8) [<c002b344>] (do_one_initcall+0x5c/0x1b8) from [<c0008578>] (kernel_init+0x90/0x144) [<c0008578>] (kernel_init+0x90/0x144) from [<c002c304>] (kernel_thread_exit+0x0/0x8) Code: e5942004 e3a0c009 e1a0331c e3a01000 (e18210b3) ---[ end trace 1b75b31a2719ed1c ]--- This patch moves register shift setting before any register accesses are done. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Cc: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
* i2c-imx: fix error handlingArnaud Patard2010-04-19
| | | | | | | | | | | | - Return -ETIMEDOUT on bus busy error - Fix timeout test "time_after(jiffies, orig_jiffies + HZ / 1000)" : By default, HZ=100 on arm. This means that this test has no chances to work and may result in a dead loop. Set timeout to 500ms. - Don't try to send a new message if we failed to transmit previous one. This was preventing to recover from error on my system Signed-off-by: Arnaud Patard <apatard@mandriva.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* i2c-scmi: Provide module aliases for automatic loadingDarrick J. Wong2010-03-24
| | | | | | | Provide module aliases for automatic loading. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-scmi: Support IBM SMBus CMI devicesCrane Cai2010-03-24
| | | | | | | | | | | | | | *) add a new HID for IBM SMBus CMI devices *) add methods for IBM SMBus CMI devices *) hook different HID with different control methods set *) minor tweaks as suggested by Jean Delvare Slightly modified by Darrick to use #define'd IBM SMBUS HID from Darrick's ACPI scan quirk patch. Signed-off-by: Crane Cai <crane.cai@amd.com> Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* Add include to i2c-xii.c to fix build errorRandy Dunlap2010-03-14
| | | | | | | | | | | drivers/i2c/busses/i2c-xiic.c:493: error: implicit declaration of function 'mdelay' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: "Richard Röjfors" <richard.rojfors@pelagicore.com> Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org> Cc: linux-i2c@vger.kernel.org Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* i2c-algo-bit: Add pre- and post-xfer hooksJean Delvare2010-03-13
| | | | | | | | | Drivers might have to do random things before and/or after I2C transfers. Add hooks to the i2c-algo-bit implementation to let them do so. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Alex Deucher <alexdeucher@gmail.com>
* i2c: Drop configure option I2C_DEBUG_CHIPJean Delvare2010-03-13
| | | | | | | | Now that directory drivers/i2c/chips is gone, configuration option I2C_DEBUG_CHIP no longer has any effect, so we can drop it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
* tsl2550: Move from i2c/chips to miscJean Delvare2010-03-13
| | | | | | | | Move the last remaining driver from i2c/chips to misc. Good ridance! Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
* i2c-i801: Don't use the block buffer for I2C block writesJean Delvare2010-03-13
| | | | | | | | | | | Experience has shown that the block buffer can only be used for SMBus (not I2C) block transactions, even though the datasheet doesn't mention this limitation. Reported-by: Felix Rubinstein <felixru@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Oleg Ryjkov <oryjkov@gmail.com> Cc: stable@kernel.org
* i2c-powermac: Be less verbose in the absence of real errors.Jean Delvare2010-03-13
| | | | | | | | | | Be less verbose in the absence of real errors. We don't have to report failed probes to the users, it's only confusing them. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Andrey Gusev <ronne@list.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: stable@kernel.org
* i2c-smbus: Use device_lock/device_unlockStephen Rothwell2010-03-13
| | | | | | | Use the new device locking/unlocking API. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2010-03-12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits) doc: fix typo in comment explaining rb_tree usage Remove fs/ntfs/ChangeLog doc: fix console doc typo doc: cpuset: Update the cpuset flag file Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed Remove drivers/parport/ChangeLog Remove drivers/char/ChangeLog doc: typo - Table 1-2 should refer to "status", not "statm" tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h devres/irq: Fix devm_irq_match comment Remove reference to kthread_create_on_cpu tree-wide: Assorted spelling fixes tree-wide: fix 'lenght' typo in comments and code drm/kms: fix spelling in error message doc: capitalization and other minor fixes in pnp doc devres: typo fix s/dev/devm/ Remove redundant trailing semicolons from macros fix typo "definetly" -> "definitely" in comment tree-wide: s/widht/width/g typo in comments ... Fix trivial conflict in Documentation/laptops/00-INDEX
| * Merge branch 'for-next' into for-linusJiri Kosina2010-03-08
| |\ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
| | * tree-wide: Assorted spelling fixesDaniel Mack2010-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * fix typo "definetly" -> "definitely" in commentUwe Kleine-König2010-02-05
| | | | | | | | | | | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | i2c: move i2c_omap's probe function to .devinit.textUwe Kleine-König2010-03-07
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A pointer to omap_i2c_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: chandra shekhar <x0044955@ti.com> Cc: Jason P Marini <jason.marini@gmail.com> Cc: Syed Mohammed Khasim <x0khasim@ti.com> Cc: Jarkko Nikula <jarkko.nikula@nokia.com> Cc: Juha Yrjola <juha.yrjola@solidboot.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | Merge branch 'for-linus/i2c' of git://git.fluff.org/bjdooks/linuxLinus Torvalds2010-03-07
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus/i2c' of git://git.fluff.org/bjdooks/linux: i2c: Add support for Xilinx XPS IIC Bus Interface i2c: omap: Add support for 16-bit registers i2c-pnx: fix setting start/stop condition powerpc: doc/dts-bindings: update doc of FSL I2C bindings i2c-mpc: add support for the MPC512x processors from Freescale i2c-mpc: rename "setclock" initialization functions to "setup" i2c-mpc: use __devinit[data] for initialization functions and data i2c/imx: don't add probe function to the driver struct i2c: Add support for Ux500/Nomadik I2C controller
| * \ Merge branch 'next-i2c-xilinx' into next-i2cBen Dooks2010-03-07
| |\ \
| | * | i2c: Add support for Xilinx XPS IIC Bus InterfaceRichard Röjfors2010-03-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Xilinx XPS IIC Bus Interface. The driver uses the dynamic mode, supporting to put several I2C messages in the FIFO to reduce the number of interrupts. It has the same feature as ocores, it can be passed a list of devices that will be added when the bus is probed. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| * | | Merge branch 'next-i2c-omap' into next-i2cBen Dooks2010-03-07
| |\ \ \
| | * | | i2c: omap: Add support for 16-bit registersCory Maccarrone2010-03-07
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current i2c-omap driver is set up for 32-bit registers, which corresponds to most OMAP devices. However, OMAP730/850 based devices use a 16-bit register size. This change modifies the driver to perform a runtime CPU type check to determine the register sizes, and uses a bit shift of either 1 or 2 bits to compute the proper register sizes for all registers. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| * | | Merge branch 'next-i2c-mpc-v8' into next-i2cBen Dooks2010-03-07
| |\ \ \
| | * | | i2c-mpc: add support for the MPC512x processors from FreescaleWolfgang Grandegger2010-03-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As I2C interrupts must be enabled for the MPC512x by the setup function as well, "fsl,preserve-clocking" is handled in a slighly different way. Also, the old settings are now reported calling dev_dbg(). For the MPC512x the clock setup function of the MPC52xx can be re-used. Furthermore, the Kconfig help has been updated and corrected. Signed-off-by: Wolfgang Grandegger <wg@denx.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| | * | | i2c-mpc: rename "setclock" initialization functions to "setup"Wolfgang Grandegger2010-03-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To prepare support for the MPC512x processors from Freescale the "setclock" initialization functions have been renamed to "setup" because I2C interrupts must be enabled for the MPC512x by this function as well. Signed-off-by: Wolfgang Grandegger <wg@denx.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| | * | | i2c-mpc: use __devinit[data] for initialization functions and dataWolfgang Grandegger2010-03-07
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "__devinit[data]" has not yet been used for all initialization functions and data. To avoid truncating lines, the struct "mpc_i2c_match_data" has been renamed to "mpc_i2c_data", which is even the better name. Signed-off-by: Wolfgang Grandegger <wg@denx.de> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| * / / i2c-pnx: fix setting start/stop conditionLuotao Fu2010-03-07
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The start/stop condtions are set in different places repetedly in the i2c-pnx driver. Beside in i2c_pnx_start and i2c_pnx_stop the start/stop bit are also set during the transfer of a i2c message in the master_xmit/rcv calls. This is wrong since we can't set the start/stop condition during the transaction of a single message any way. As a matter of fact, the driver will sometimes set both the start and the stop bits at one time. This can be easily reproduced by sending a simple read request like e.g struct i2c_msg msgs[] = { { addr, 0, 1, buf }, { addr, I2C_M_RD, offset, buf } }; While processing the first message the i2c_pnx_master_xmit will set both the start_bit and the stop_bit, which will eventually confuse the slave. Fixed by remove setting start/stop condition from the transmit routines. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| * | i2c/imx: don't add probe function to the driver structUwe Kleine-König2010-03-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Having a pointer to the probe function is unnecessary when using platform_driver_probe and yields a section mismatch warning after removing the white list entry "*driver" for { .data$, .data.rel$ } -> { .init.* } mismatches in modpost. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| * | i2c: Add support for Ux500/Nomadik I2C controllersrinidhi kasagar2010-03-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for ST-Ericsson's I2C block found in Ux500 and Nomadik 8815 platforms. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
* | | mfd: Fix lpc_sch related depends/selects, fix build errorRandy Dunlap2010-03-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LPC_SCH is selected by GPI_SCH and I2C_ISCH, even when PCI is not enabled, but LPC_SCH depends on PCI, so make GPI_SCH and I2C_ISCH also depend on PCI. Those 2 selects also need to select what LPC_SCH selects, since kconfig does not follow selects. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Denis Turischev <denis@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | | i2c: convert i2c-isch to platform_deviceDenis Turischev2010-03-07
|/ / | | | | | | | | | | | | | | Convert i2c-isch to platform_device for the lpc mfd core to add it at probe time. Signed-off-by: Denis Turischev <denis@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | bitops: rename for_each_bit() to for_each_set_bit()Akinobu Mita2010-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename for_each_bit to for_each_set_bit in the kernel source tree. To permit for_each_clear_bit(), should that ever be added. The patch includes a macro to map the old for_each_bit() onto the new for_each_set_bit(). This is a (very) temporary thing to ease the migration. [akpm@linux-foundation.org: add temporary for_each_bit()] Suggested-by: Alexey Dobriyan <adobriyan@gmail.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Artem Bityutskiy <dedekind@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | i2c: Document the message size limitZhangfei Gao2010-03-02
| | | | | | | | | | | | | | | | i2c_master_send & i2c_master_recv do not support more than 64 kb transfer, since msg.len is u16. Signed-off-by: Zhangfei Gao <zgao6@marvell.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | i2c-algo-pca: Drop duplicate variableJean Delvare2010-03-02
| | | | | | | | | | | | | | Thanks to -Wshadow. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
* | i2c: Hook up runtime PM supportMark Brown2010-03-02
| | | | | | | | | | | | | | | | | | | | | | | | Allow I2C drivers to make use of the runtime PM framework by adding bus implementations of the runtime PM operations. These simply immediately suspend when the device is idle. The runtime PM framework provides drivers with off the shelf refcounts for enables and sysfs control for managing runtime suspend from userspace so is useful even without meaningful input from the bus. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | i2c-parport-light: Add SMBus alert supportJean Delvare2010-03-02
| | | | | | | | | | | | | | | | | | | | Add support for the SMBus alert mechanism to the i2c-parport-light driver. The ADM1032 evaluation board at least is properly wired for this. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Trent Piepho <tpiepho@freescale.com>
* | i2c-parport: Add SMBus alert supportJean Delvare2010-03-02
| | | | | | | | | | | | | | | | | | Add support for the SMBus alert mechanism to the i2c-parport driver. The ADM1032 evaluation board at least is properly wired for this. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Trent Piepho <tpiepho@freescale.com>
* | i2c: Separate Kconfig option for i2c-smbusJean Delvare2010-03-02
| | | | | | | | | | | | | | | | | | | | | | | | Having a separate Kconfig option for i2c-smbus makes it possible to build that support as a module even when i2c-core itself is built-in. Bus drivers which implement SMBus alert should select this option, so in most cases this option is hidden and the user doesn't have to care about it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Trent Piepho <tpiepho@freescale.com>
* | i2c: Add SMBus alert supportJean Delvare2010-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SMBus alert support. The SMBus alert protocol allows several SMBus slave devices to share a single interrupt pin on the SMBus master, while still allowing the master to know which slave triggered the interrupt. This is based on preliminary work by David Brownell. The key difference between David's implementation and mine is that his was part of i2c-core, while mine is split into a separate, standalone module named i2c-smbus. The i2c-smbus module is meant to include support for all SMBus extensions to the I2C protocol in the future. The benefit of this approach is a zero cost for I2C bus segments which do not need SMBus alert support. Where David's implementation increased the size of struct i2c_adapter by 7% (40 bytes on i386), mine doesn't touch it. Where David's implementation added over 150 lines of code to i2c-core (+10%), mine doesn't touch it. The only change that touches all the users of the i2c subsystem is a new callback in struct i2c_driver (common to both implementations.) I seem to remember Trent was worried about the footprint of David'd implementation, hopefully mine addresses the issue. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Trent Piepho <tpiepho@freescale.com>
* | i2c-parport: Give powered devices some time to settleJean Delvare2010-03-02
| | | | | | | | | | | | | | | | When the i2c-parport adapter is reponsible for powering devices, it would seem reasonable to give them some time to settle before trying to access them. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | i2c-tiny-usb: Fix a comment on bus frequencyJean Delvare2010-03-02
| | | | | | | | | | | | | | | | | | | | The description of the delay parameter is incomplete, it suggests that there is a direct relation between the delay value and the bus frequency. In fact, due to additional delays in the i2c bitbanging code, the i2c clock is always much slower. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Till Harbaum <Till@Harbaum.org>
* | i2c-i801: Add Intel Cougar Point device IDsSeth Heasley2010-03-02
| | | | | | | | | | | | | | Add the Intel Cougar Point (PCH) SMBus controller device IDs. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | i2c: Make PCI device ids constantMárton Németh2010-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The id_table field of the struct pci_driver is constant in <linux/pci.h> so it is worth to make initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-19 22:29:10 -0500