aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/i2c/chips/Kconfig
Commit message (Collapse)AuthorAge
* tsl2550: Move from i2c/chips to miscJean Delvare2010-03-13
| | | | | | | | Move the last remaining driver from i2c/chips to misc. Good ridance! Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
* i2c/chips: Move ds1682 to drivers/miscWolfram Sang2009-12-06
| | | | | | | | | As i2c/chips is deprecated, move ds1682 to a more apropriate location. Build tested. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/chips: Remove deprecated pcf8574 driverWolfram Sang2009-09-18
| | | | | | | | | | The pcf8574 driver in drivers/i2c/chips which just exports its register to sysfs is superseded by drivers/gpio/pcf857x.c which properly uses the gpiolib. As this driver has been deprecated for more than a year, finally remove it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/chips: Remove deprecated pca9539 driverWolfram Sang2009-09-18
| | | | | | | | | | The pca9539 driver in drivers/i2c/chips which just exports its registers to sysfs is superseded by drivers/gpio/pca953x.c which properly uses the gpiolib. As this driver has been deprecated for more than a year, finally remove it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Ben Gardner <gardner.ben@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/chips: Remove deprecated pcf8575 driverWolfram Sang2009-09-18
| | | | | | | | | | The pcf8575 driver in drivers/i2c/chips which just exports its register to sysfs is superseded by drivers/gpio/pcf857x.c which properly uses the gpiolib. As this driver has been deprecated for more than a year, finally remove it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Bart Van Assche <bart.vanassche@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/chips: Move max6875 to drivers/misc/eepromWolfram Sang2009-06-15
| | | | | | | | | | | | | | | This driver only reads the user EEPROM of that chip, so we can move it to the eeprom-directory in order to further clean up (and later remove) drivers/i2c/chips. The Kconfig text was updated to match the current functionality, dropping the meanwhile obsoleted parts. Defconfigs have been adapted. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Ben Gardner <gardner.ben@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* Move the pcf8591 driver to hwmonJean Delvare2009-03-30
| | | | | | | | | | | | | | Directory drivers/i2c/chips is going away, so drivers there must find new homes. For the pcf8591 driver, the best choice seems to be the hwmon subsystem. While the Philips PCF8591 device isn't a typical hardware monitoring chip, its DAC interface is compatible with the hwmon one, so it fits somewhat. If a better subsystem is ever created for ADC/DAC chips, the driver could be moved there. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
* i2c: Move old eeprom driver to /drivers/misc/eepromWolfram Sang2009-01-26
| | | | | | | Update Kconfig text to specify this driver as I2C. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Move at24 to drivers/misc/eepromWolfram Sang2009-01-26
| | | | | | | | | As drivers/i2c/chips is going to go away, move the driver to drivers/misc/eeprom. Other eeprom drivers may be moved here later, too. Update Kconfig text to specify this driver as I2C. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/Anton Vorontsov2009-01-13
| | | | | | | | | | This patch is used to help Jean Delvare to get rid of drivers/i2c/chips/ directory. The new location suggested by Kumar Gala: as the driver is 83xx specific it's placed into arch/powerpc/platforms/83xx/. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* USB: move isp1301_omap to drivers/usb/otgDavid Brownell2009-01-07
| | | | | | | | | | | | | | | This moves the isp1301-omap driver from the drivers/i2c/chips directory (which will be shrinking) into a new drivers/usb/otg directory (which will grow, with more drivers and utilities). Note that OTG infrastructure needs to be initialized before either host or peripheral side USB support, and may be needed before for pure host or pure peripheral configurations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* mfd: move drivers/i2c/chips/menelaus.c to drivers/mfdDavid Brownell2009-01-04
| | | | | | | | | | | | ove the menelaus driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP2 generation chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: move drivers/i2c/chips/tps65010.c to drivers/mfdDavid Brownell2009-01-04
| | | | | | | | | | | | Move the tps65010 driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP1 generation chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* i2c: Inform about deprecated chips directoryWolfram Sang2008-10-22
| | | | | | | The chips directory under drivers/i2c is deprecated. Spread the word! Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: MPC8349E-mITX Power Management and GPIO expander driverAnton Vorontsov2008-10-13
| | | | | | | | | | On MPC8349E-mITX, MPC8315E-RDB and MPC837x-RDB boards there is a Freescale MC9S08QG8 (MCU) chip with the custom firmware pre-programmed. The chip is used to power-off the board by the software, and to control some GPIO pins. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* gpiolib: allow user-selectionMichael Buesch2008-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds functionality to the gpio-lib subsystem to make it possible to enable the gpio-lib code even if the architecture code didn't request to get it built in. The archtitecture code does still need to implement the gpiolib accessor functions in its asm/gpio.h file. This patch adds the implementations for x86 and PPC. With these changes it is possible to run generic GPIO expansion cards on every architecture that implements the trivial wrapper functions. Support for more architectures can easily be added. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: David Brownell <david-b@pacbell.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* i2c: New-style EEPROM driver using device IDsWolfram Sang2008-07-14
| | | | | | | | Add a new-style driver for most I2C EEPROMs, giving sysfs read/write access to their data. Tested with various chips and clock rates. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Deprecate the legacy gpio driversDavid Brownell2008-07-14
| | | | | | | | | | | | The legacy pcf8574 and pcf8575 drivers should be avoided on systems using the new gpiolib code, and generally deprecated in the same way the legacy pca9539 driver is deprecated. Also, correct the pca9539 deprecation to match the current name of the preferred driver: pca953x, supporting several more chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* ARM: OMAP: I2C: tps65010 driver converts to gpiolibDavid Brownell2008-04-14
| | | | | | | | | | | | | | | | Make the tps65010 driver use gpiolib to expose its GPIOs. Note: This patch will get merged via omap tree instead of I2C as it will cause some board updates. This has been discussed at on the I2C list: http://lists.lm-sensors.org/pipermail/i2c/2008-March/003031.html Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: i2c@lm-sensors.org Signed-off-by: Tony Lindgren <tony@atomide.com>
* deprecate obsolete pca9539 drivereric miao2008-02-05
| | | | | | | | | | | | | | | Use drivers/gpio/pca9539.c instead. Signed-off-by: eric miao <eric.miao@marvell.com> Acked-by: Ben Gardner <bgardner@wabtec.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* i2c/tps65010: move header to <linux/i2c/...>David Brownell2008-01-27
| | | | | | | | | Move the tps65010 header file from the OMAP arch directory to the more generic <linux/i2c/...> directory, and remove the spurious dependency of this driver on OMAP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: the scheduled I2C RTC driver removalAdrian Bunk2008-01-27
| | | | | | | | This patch contains the scheduled removal of legacy I2C RTC drivers with replacement drivers. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Add support for the PCF8575 chipBart Van Assche2008-01-27
| | | | | Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* OMAP: add TI TWL92330/Menelaus Power Management chip driverTony Lindgren2007-07-17
| | | | | | | | | | | | | | | | | | | | | | Add Texas Instruments TWL92330/Menelaus Power Management chip driver. This includes voltage regulators, Dual slot memory card tranceivers and real-time clock(RTC). The support for RTC is integrated with this driver only; it is not separate module. Passes 'rtctest' on OMAP H4 EVM, other than lack of "periodic" (1/N second) IRQs. System wakeup alarms (from suspend-to-RAM) work too. The battery keeps the RTC active over power off, so once you set clock (rdate/ntpdate/etc, then "hwclock -w") then RTC_HCTOSYS at boot time will behave as expected. Cc: "Jean Delvare" <khali@linux-fr.org> Cc: "Tony Lindgren" <tony@atomide.com> Cc: "David Brownell" <david-b@pacbell.net> Signed-off-by: Trilok Soni <soni.trilok@gmail.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* i2c: Add support for the TSL2550Rodolfo Giometti2007-07-12
| | | | | | | | Add support for Taos TSL2550 ambient light sensors. (http://www.taosinc.com/product_detail.asp?cateid=4&proid=18). Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: New DS1682 chip driverGrant Likely2007-07-12
| | | | | | | | | A driver for the Dallas DS1682 elapsed time recorder chip. Tested on a MPC5200 based board using the integrated i2c adapter. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Deprecate legacy RTC driversJean Delvare2007-07-12
| | | | | | | | | | | | | | | | | | | We have a new RTC subsystem with better drivers. Legacy driver status: * ds1337: The DS1337 and DS1339 are now supported by the rtc-ds1307 driver, so it looks to me like we could even delete the ds1337 driver right away. * ds1374: Will soon be replaced with Scott Wood's rtc-ds1374 driver. * m41t00: The M41T00 is supported by the rtc-ds1307 driver. For the M41T81 and M41T85, the rtc-m41t80 driver written by Atsushi Nemoto should work. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Mark A. Greer <mgreer@mvista.com> Acked-by: James Chapman <jchapman@katalix.com> Cc: Randy Vinson <rvinson@mvista.com>
* Use menuconfig objects - I2CJan Engelhardt2007-05-01
| | | | | | | | Allow the whole I2C menu to be disabled at once without diving into the submenus for deselecting all options (should the user desire so). Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* [PATCH] i2c: Suggest N for rare devices in KconfigJean Delvare2006-06-22
| | | | | | | | | | | | | | | | | | Improve the Kconfig help text of the follwing i2c drivers: * busses/i2c-pca-isa.c * chips/pcf8574.c * chips/pcf8591.c These are hard to detect and building them into the kernel results in long delays at boot. March 2006, thread "I2C_PCA_ISA causes boot delays" http://marc.theaimsgroup.com/?l=linux-kernel&m=114360399415744&w=2 April 2006, thread "i2c-related 1-minute hang during bootup" http://marc.theaimsgroup.com/?l=linux-kernel&m=114640992330721&w=2 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] RTC subsystem: I2C cleanupAlessandro Zummo2006-03-27
| | | | | | | | | | | | | This patch, completely optional, removes from drivers/i2c/chips all the drivers that are implemented in the new RTC subsystem. It should be noted that none of the current driver is actually integrated, i.e. usable without further patches. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i2c: New Xicor X1205 RTC driverAlessandro Zummo2005-10-28
| | | | | | | | New driver for the Xicor X1205 RTC chip. Signed-off-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: hwmon vs i2c, second round (07/11)Jean Delvare2005-09-05
| | | | | | | | | | | | | The only part left in i2c-sensor is the VRM/VRD/VID handling code. This is in no way related to i2c, so it doesn't belong there. Move the code to hwmon, where it belongs. Note that not all hardware monitoring drivers do VRM/VRD/VID operations, so less drivers depend on hwmon-vid than there were depending on i2c-sensor. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: Move hwmon drivers (1/3)Jean Delvare2005-07-11
| | | | | | | Part 1: Configuration files and Makefiles. From: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: SENSORS_ATXP1 must select I2C_SENSORAdrian Bunk2005-07-11
| | | | | | | | | | | | | | | | | | | | | | | On Thu, Jun 30, 2005 at 11:47:09PM +0200, Sebastian Pigulak wrote: > I've tried patching linux-2.6.13-RC1 with patch-2.6.13-rc1-git2 and > building atxp1(it allows Vcore voltage changing) into the kernel. > Unfortunately, the kernel compilation stops with: > > LD init/built-in.o > LD vmlinux > drivers/built-in.o(.text+0x92298): In function `atxp1_detect': > : undefined reference to `i2c_which_vrm' > drivers/built-in.o(.text+0x921ae): In function `atxp1_attach_adapter': > : undefined reference to `i2c_detect' > make: *** [vmlinux] B??d 1 > ==> ERROR: Build Failed. Aborting... > > Could someone have a look at the module and possibly fix it up? SENSORS_ATXP1 must select I2C_SENSOR. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: max6875 Kconfig updateJean Delvare2005-07-11
| | | | | | | Here is a proposed Kconfig update for the new max6875 i2c chip driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: minor TPS6501x cleanupsdavid-b@pacbell.net2005-07-11
| | | | | | | | | This includes various small cleanups and fixes to the TPS 6501x driver that came mostly from review feedback by Jean Delvare; thanks Jean! Also some goofy whitespace gets fixed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: Add support for Maxim/Dallas DS1374 Real-Time Clock Chip (1/2)Randy Vinson2005-06-22
| | | | | | | | | | | Add support for Maxim/Dallas DS1374 Real-Time Clock Chip This change adds support for the Maxim/Dallas DS1374 RTC chip. This chip is an I2C-based RTC that maintains a simple 32-bit binary seconds count with battery backup support. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: add new pca9539 driverbgardner@wabtec.com2005-06-22
| | | | | | | | | | This is an i2c driver for the Philips PCA9539 (16 bit I/O port). It uses the new i2c-sysfs interfaces. The patch includes documentation. It depends on the patch that renames "i2c-sysfs.h" to "hwmon-sysfs.h" Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] max6875: new i2c device driverBGardner@Wabtec.com2005-06-22
| | | | | | | This patch adds support for the MAX6875/MAX6874 chips. Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: KConfig update - some EXPERIMENTAL removalR.Marek@sh.cvut.cz2005-06-22
| | | | | | | | | | | | Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: add i2c driver for TPS6501xDavid Brownell2005-06-22
| | | | | | | | | This adds an I2C driver for the TPS6501x series of power management chips. It's used on many OMAP based boards, and this driver has been widely used in the Linux-OMAP trees over the last year or so. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: chips/Kconfig correctionsJean Delvare2005-06-22
| | | | | | | | Here are some corrections for drivers/i2c/chips/Kconfig. Signed-off-by: Alexey Fisher <fishor@gmx.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: Add support for the LPC47M15x and LPC47M192 chips to smsc47m1Jean Delvare2005-06-22
| | | | | | | | | | | | | This simple patch adds support for the SMSC LPC47M15x and LPC47M192 chips to the smsc47m1 hardware monitoring driver. These chips are compatible with the other ones already supported by the driver, so I see no reason not to support them, especially when the Linux 2.4 version of the driver does already. I also modified the info printks to name the chips by their real name. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: New hardware monitoring driver: w83627ehfJean Delvare2005-06-22
| | | | | | | | | | | | | | | | | | | | | | This is a new hardware monitoring driver, w83627ehf, which supports the Winbond W83627EHF Super-I/O chip. The driver is not complete, but already usable. It only implements fan speed and temperature monitoring, while the chip also supports voltage inputs with VID, PWM output and temperature sensor selection. I have no more time to work on this, but anyone with supported hardware could add the missing functionalities later. This driver is largely derived from the w83627hf driver. Thanks to Leon Moonen and Steve Cliffe for tesing the preliminary versions of my driver and reporting the problems they encountered. Thanks to Grant Coady for noticing and fixing various corner cases in the fan management. This third version of the driver hopefully addresses all the issues the original version had. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: add new hardware monitor driver: adm9240Grant Coady2005-06-22
| | | | | | | | | Completion of Michiel Rook's port of adm9240 to 2.6 with addition of auto fan clock divider based on Jean Delvare's algorithm, and replaces scaling macros with static inlines. Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] ds1337 driver works also with ds1339 chipLadislav Michl2005-06-22
| | | | | | | | | | | | | On Wed, May 04, 2005 at 12:07:11PM +0200, Jean Delvare wrote: > Additionally, I would welcome an additional patch documenting the fact > that the ds1337 driver will work fine with the Dallas DS1339 real-time > clock chip. Document the fact that ds1337 driver works also with DS1339 real-time clock chip. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: add new atxp1 driverSebastian Witt2005-06-22
| | | | | | | | | Adds support for the Attansic ATXP1 I2C device, found on some x86 plattforms to change CPU and other voltages. Depends on the previous i2c-vid.h patch. Signed-off-by: Sebastian Witt <se.witt@gmx.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-16
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-24 15:48:42 -0500