aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses
Commit message (Collapse)AuthorAge
* [PATCH] scx200_acb: Fix for the CS5535 errataJordan Crouse2006-05-09
| | | | | | | | | | | | | | | | | | | | | | | This is a fix for the CS5535 errata 111: When the SMBus controller tries to access a non-existing device, it sets the NEGACK bit, SMBus I/O offset 01h[4], to 1 after it detects no acknowledge at the ninth clock. The specification states that the bit can be cleared by writing a 1 to it, but under certain circumstances it is possible for this bit to not clear. Writing a 0 to the bit resets the internal state machine and clears the issue. Since all writable bits in ACBST are W1C bits (write-one-to-clear) the second write doesn't affect any other logic except the buggy NEGACK state machine. The second write clears an internal register which is responsible for "overwriting" the NEGACK bit in ACBST. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] scx200_acb: Fix resource name use after freeJean Delvare2006-05-09
| | | | | | | | | | | | We can't pass a string on the stack to request_region. As soon as we leave the function that stack is gone and the string is lost. Let's use the same string we identify the i2c_adapter with instead, it's more simple, more consistent, and just works. This is the second half of fix to bug #6445. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] scx200_acb: Fix return on init errorJean Delvare2006-05-09
| | | | | | | | | | | | | The scx200_acb driver shouldn't return failure after initialization if it successfully registered at least one i2c_adapter, else we are leaking resources. The driver was OK in that respect up to 2.6.16, a recent change broke it. This is part of the fix to bug #6445. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c-i801: Fix resume when PEC is usedJean Delvare2006-04-20
| | | | | | | | | | | | | | | | | | Fix for bug #6395: Fail to resume on Tecra M2 with ADM1032 and Intel 82801DBM The BIOS of the Tecra M2 doesn't like it when it has to reboot or resume after the i2c-i801 driver has left the SMBus in PEC mode. The most simple fix is to clear the PEC bit after after every transaction. That's what this driver was doing up to 2.6.15 (inclusive). Thanks to Daniele Gaffuri for the very good report. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i2c-parport: Make type parameter mandatoryMark M. Hoffman2006-04-14
| | | | | | | | | | | | | | | | This patch forces the user to specify what type of adapter is present when loading i2c-parport or i2c-parport-light. If none is specified, the driver init simply fails - instead of assuming adapter type 0. This alleviates the sometimes lengthy boot time delays which can be caused by accidentally building one of these into a kernel along with several i2c slave drivers that have lengthy probe routines (e.g. hwmon drivers). Kconfig and documentation updated accordingly. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c-sis96x: Remove an init-time log messageMark M. Hoffman2006-04-14
| | | | | | | | | This patch removes an init-time kernel log message. http://marc.theaimsgroup.com/?l=linux-kernel&m=114232987208628&w=3 Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: i2c-ixp4xx: Add hwmon classAlessandro Zummo2006-03-23
| | | | | | | | This patch adds I2C_CLASS_HWMON to the ixp4xx bus driver. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: i2c-piix4: Add Broadcom HT-1000 supportMartin Devera2006-03-23
| | | | | | | | | | Add Broadcom HT-1000 south bridge's PCI ID to i2c-piix driver. Note that at least on Supermicro H8SSL it uses non-standard SMBHSTCFG = 3 and standard values like 0 or 9 causes hangup. Signed-off-by: Martin Devera <devik@cdi.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: i2c-amd756-s4882: Improve static mutex initializationJean Delvare2006-03-23
| | | | | | Static mutexes can be initialized at declaration time. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* [PATCH] I2C: i2c-ali1535: Drop redundant mutexJean Delvare2006-03-23
| | | | | | | | Drop a redundant mutex in driver i2c-ali1535. The struct i2c_adapter includes a mutex for the same purpose, operated by i2c-core. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: Fix i2c-ite name initializationJean Delvare2006-03-23
| | | | | | | | Properly set the name member of the i2c_adapter structure of the ite i2c adapter driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: Drop the i2c-frodo bus driverJean Delvare2006-03-23
| | | | | | | | Drop the i2c-frodo bus driver. It isn't referenced by the build system, and depends on code which was never included in 2.6 kernels. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: Semaphore to mutex conversions, part 3Jean Delvare2006-03-23
| | | | | | | | Cleanup after the semaphores to mutexes conversions in the i2c subsystem. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: Semaphore to mutex conversions, part 2Ingo Molnar2006-03-23
| | | | | | | | | | | | | semaphore to mutex conversion. the conversion was generated via scripts, and the result was validated automatically via a script as well. build tested. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: fix sx200_acb build on other archesJean Delvare2006-03-23
| | | | | | | | scx200_acb is only useful on a few Geode-based systems, and won't compile on non-x86 systems due to the lack of asm/msr.h, as reported by Andrew Morton. Thus, we should make that driver depend on X86. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* [PATCH] i2c: scx200_acb minimal documentation updateBen Gardner2006-03-23
| | | | | | | | scx200_acb: Minimal documentation update Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: scx200_acb fix and speed up the poll loopBen Gardner2006-03-23
| | | | | | | | scx200_acb: Fix and speed up the poll loop Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: scx200_acb add support for the CS5535/CS5536Ben Gardner2006-03-23
| | | | | | | scx200_acb: Add support for the CS5535/CS5536 Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* [PATCH] i2c: scx200_acb remove use of lock_kernelBen Gardner2006-03-23
| | | | | | | | scx200_acb: remove use of lock_kernel() Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: scx200_acb refactor/simplify codeBen Gardner2006-03-23
| | | | | | | | scx200_acb: refactor/simplify code (no functional changes) Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: scx200_acb debug log cleanupBen Gardner2006-03-23
| | | | | | | | scx200_acb: debug log cleanup Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: scx200_acb whitespace and comment cleanupBen Gardner2006-03-23
| | | | | | | | scx200_acb: Whitespace and comment cleanup Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: Convert i2c to mutexesArjan van de Ven2006-03-23
| | | | | | | The patch below converts a few i2c semaphores to mutexes Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] handle errors returned by platform_get_irq*()David Vrabel2006-03-20
| | | | | | | | | platform_get_irq*() now returns on -ENXIO when the resource cannot be found. Ensure all users of platform_get_irq*() handle this error appropriately. Signed-off-by: David Vrabel <dvrabel@arcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: Drop outdated probe/remove code in i2c-isaJean Delvare2006-02-14
| | | | | | | | | | | | | Probe and remove methods are now defined at bus level. No more need to redefine them at driver level in i2c-isa. This lets us get rid of these annoying messages: Driver 'it87-isa' needs updating - please use bus_type methods Thanks to Nicolas Mailhot for reporting the problem and testing the fix. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: Use ARRAY_SIZE macroTobias Klauser2006-02-06
| | | | | | | | | | Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]). Some trailing whitespaces are also removed. Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c-i801: I2C patch for Intel ICH8Jason Gaston2006-02-06
| | | | | | | | This patch adds the Intel ICH8 DID to the i2c-i801.c and Kconfig files for I2C support. Signed-off-by: Jason Gaston <Jason.d.gaston@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [ARM] 3237/1: PXA I2C driver updatesRichard Purdie2006-01-12
| | | | | | | | | | | | | | | | Patch from Richard Purdie This patch adds a check to see if the pxa i2c interface is enabled before allowing it to be used and resets it if found to be disabled. This automatically restores the interface if the device has been suspended and resumed without causing any suspend/resume call ordering issues. The patch also fixes a build warning and adds an appropriate module licence (the module is gpl according to the header). Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] 2/5 powerpc: Rework PowerMac i2c part 2Benjamin Herrenschmidt2006-01-08
| | | | | | | | | | | | | | | | | | This is the continuation of the previous patch. This one removes the old PowerMac i2c drivers (i2c-keywest and i2c-pmac-smu) and replaces them both with a single stub driver that uses the new PowerMac low i2c layer. Now that i2c-keywest is gone, the low-i2c code is extended to support interrupt driver transfers. All i2c busses now appear as platform devices. Compatibility with existing drivers should be maintained as the i2c bus names have been kept identical, except for the SMU bus but in that later case, all users has been fixed. With that patch added, matching a device node to an i2c_adapter becomes trivial. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] 1/5 powerpc: Rework PowerMac i2c part 1Benjamin Herrenschmidt2006-01-08
| | | | | | | | | | | | | | | This is the first part of a rework of the PowerMac i2c code. It completely reworks the "low_i2c" layer. It is now more flexible, supports KeyWest, SMU and PMU i2c busses, and provides functions to match device nodes to i2c busses and adapters. This patch also extends & fix some bugs in the SMU driver related to i2c support and removes the clock spreading hacks from the pmac feature code rather than adapting them to the new API since they'll be replaced by the platform function code completely in patch 3/5 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Unify udbg (#2)Benjamin Herrenschmidt2006-01-08
| | | | | | | | | | | | | | | | | | This patch unifies udbg for both ppc32 and ppc64 when building the merged achitecture. xmon now has a single "back end". The powermac udbg stuff gets enriched with some ADB capabilities and btext output. In addition, the early_init callback is now called on ppc32 as well, approx. in the same order as ppc64 regarding device-tree manipulations. The init sequences of ppc32 and ppc64 are getting closer, I'll unify them in a later patch. For now, you can force udbg to the scc using "sccdbg" or to btext using "btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg output to something else than the autodetected OF output device in a later patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [ARM] Move asm/hardware/clock.h to linux/clk.hRussell King2006-01-07
| | | | | | | This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge with Linus' kernel.Russell King2006-01-07
|\
| * [PATCH] i2c: i2c-mv64xxx fix transaction abortionMark A. Greer2006-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | When the i2c-mv64xxx i2c driver is signalled to abort a transaction, it aborts it immediately by issuing a stop condition on the bus. This violates the i2c protocol and can cause what appears to be an i2c bus hang. This patch delays issuing the stop condition until the i2c device can reasonably expect a stop condition. Also includes a minor fixup. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * [PATCH] i2c: i2c-nforce2 add nforce4 MCP-04 device IDJean Delvare2006-01-06
| | | | | | | | | | | | | | One more supported PCI ID for the i2c-nforce2 driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] i2c: i2c-ibm_iic add I2C_CLASS_HWMONMartin Hicks2006-01-06
| | | | | | | | | | | | | | | | | | Add the ibm_iic driver to the HWMON class so it will scan the bus for connected hardware monitor sensors. Signed-off-by: Martin Hicks <mort@bork.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] I2C: Fix up debug build error for previous i2c structure changesGreg Kroah-Hartman2006-01-06
| | | | | | | | | | Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * [PATCH] i2c: Drop i2c_driver.{owner,name}, 1 of 11Laurent Riffard2006-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | We should use the i2c_driver.driver's .name and .owner fields instead of the i2c_driver's ones. This patch updates the core of the i2c drivers: it removes .name and .owner fields from the struct i2c_device and modify various functions to use struct device fields instead. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] i2c: Add support for Barco LPT->DVI to i2c-parportPeter Korsgaard2006-01-06
| | | | | | | | | | | | | | | | | | The following patch adds support for the Barco LPT->DVI I2C adapter to the i2c-parport driver. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] i2c: i2c-i801 explicitly enables/disables PECMark M. Hoffman2006-01-06
| | | | | | | | | | | | | | | | | | This patch tweaks i2c-i801.c so that the driver always sets the SMBAUXCTL register (which enables/disables PEC) explicitly before each transaction. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [ARM] Remove clk_use()/clk_unuse()Russell King2006-01-03
|/ | | | | | | | | It seems that clk_use() and clk_unuse() are additional complexity which isn't required anymore. Remove them from the clock framework to avoid the additional confusion which they cause, and update all ARM machine types except for OMAP. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] i2c: Fix i2c-mv64xxx compilation errorMark A. Greer2005-12-16
| | | | | | | | | | The busses/i2c-mv64xxx.c driver doesn't currently compile because of an incorrect argument to dev_err(). This patch fixes that. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [DRIVER MODEL] Fix merge clashes with ARM ixp2000 / ixp4xx platformsRussell King2005-11-17
| | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds2005-11-11
|\
| * [DRIVER MODEL] Convert platform drivers to use struct platform_driverRussell King2005-11-09
| | | | | | | | | | | | | | | | | | This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] PCI: removed unneeded .owner field from struct pci_driverGreg Kroah-Hartman2005-11-10
| | | | | | | | Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] i2c-viapro: Some adjustmentsJean Delvare2005-11-08
|/ | | | | | | | | | | | | | | | | | | The big i2c-viapro SMBus driver update which went into 2.6.14-git1 introduced a few minor issues. Nothing critical, but I would like a few adjustments to be merged in to fix the following problems: * VIA should not be spelled Via. * Frodo Looijaard and Philip Edelbrock did not write the i2c-viapro driver. * When debugging is disabled, half of messages would be logged. * Drop an unneeded masking. * Some port reads can be avoided now that the transaction size is passed as a parameter to vt596_transaction(). * SMBus Receive Byte transactions are used for probing too (for EEPROMs), so hide errors on these too. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] kfree cleanup: misc remaining driversJesper Juhl2005-11-07
| | | | | | | | | | | | | | | | | | This is the remaining misc drivers/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in misc files in drivers/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org> Acked-by: Roland Dreier <rolandd@cisco.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Len Brown <len.brown@intel.com> Acked-by: "Antonino A. Daplas" <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2005-11-02
|\
| * [ARM] 3079/1: Fix typo in i2c-iop3xx.c (invalid pointer passed to ↵Dan Williams2005-11-01
| | | | | | | | | | | | | | | | | | | | | | | | | | release_mem_region) Patch from Dan Williams * If request_irq fails then a call to release_mem_region will be made with an invalid pointer. * Two formatting fixes Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-27 16:56:48 -0500