aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses
Commit message (Collapse)AuthorAge
* Merge branch 'merge'Paul Mackerras2006-08-08
|\
| * [PATCH] SCX200_ACB: eliminate spurious timeout errorsDavid Woodhouse2006-08-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While busy-waiting for completion, check the hardware after scheduling; don't schedule and then immediately check the _timeout_. If the yield() took a long time (as it does on my OLPC prototype board when it's busy), we'd report a timeout even though the hardware was now ready. This fixes it, and also switches the yield() for a cond_resched() because we don't actually want to be _that_ nice about it. I see nice tightly-packed SMBus transactions now, rather than waiting for milliseconds between successive phases. Actually, we shouldn't be busy-waiting here at all. We should be using interrupts. That's an exercise for another day though. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Cc: Christer Weinigel <wingel@nano-system.com> Cc: <Jordan.Crouse@amd.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge branch 'merge'Paul Mackerras2006-07-31
|\|
| * [PATCH] i2c-powermac: Fix master_xfer return valueJean Delvare2006-07-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the value returned by the i2c-powermac's master_xfer method. It should return the number of messages processed successfully, but instead returns the number of data bytes in the first (and only) processed message. Also explicitly mention the master_xfer convention so that future implementations get it right directly. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] scx200_acb: Fix the block transactionsJean Delvare2006-07-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The scx200_acb i2c bus driver pretends to support SMBus block transactions, but in fact it implements the more simple I2C block transactions. Additionally, it lacks sanity checks on the length of the block transactions, which could lead to a buffer overrun. This fixes an oops reported by Alexander Atanasov: http://marc.theaimsgroup.com/?l=linux-kernel&m=114970382125094 Thanks to Ben Gardner for fixing my bugs :) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] scx200_acb: Fix the state machineThomas Andrews2006-07-12
| | | | | | | | | | | | | | | | | | | | Fix the scx200_acb state machine: * Nack was sent one byte too late on reads >= 2 bytes. * Stop bit was set one byte too late on reads. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] i2c-iop3xx: Avoid addressing selfPeter Milne2006-07-12
| | | | | | | | | | | | | | | | | | | | | | Avoid addressing self when sending a slave address. Follows instruction in Intel 80331/80321 manuals. Ignoring this worked previously on 80321, but causes a hang on i2cdetect on 80331. Signed-off-by: Peter Milne <peter.milne@d-tacq.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [POWERPC] powermac: Constify & voidify get_property()Jeremy Kerr2006-07-31
|/ | | | | | | | | | | | | Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powermac platform & macintosh driver changes. Built for pmac32_defconfig, g5_defconfig Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] irq-flags: misc drivers: Use the new IRQF_ constantsThomas Gleixner2006-07-02
| | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds2006-06-30
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: Remove obsolete #include <linux/config.h> remove obsolete swsusp_encrypt arch/arm26/Kconfig typos Documentation/IPMI typos Kconfig: Typos in net/sched/Kconfig v9fs: do not include linux/version.h Documentation/DocBook/mtdnand.tmpl: typo fixes typo fixes: specfic -> specific typo fixes in Documentation/networking/pktgen.txt typo fixes: occuring -> occurring typo fixes: infomation -> information typo fixes: disadvantadge -> disadvantage typo fixes: aquire -> acquire typo fixes: mecanism -> mechanism typo fixes: bandwith -> bandwidth fix a typo in the RTC_CLASS help text smb is no longer maintained Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
| * Remove obsolete #include <linux/config.h>Jörn Engel2006-06-30
| | | | | | | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | [PATCH] i2c-801: 64bit resource fixAndrew Morton2006-06-30
|/ | | | | | | | | | | drivers/i2c/busses/i2c-i801.c: In function 'i801_probe': drivers/i2c/busses/i2c-i801.c:496: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t' Cc: Greg KH <greg@kroah.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i2c-i801.c: don't pci_disable_device() after it was just enabledDaniel Ritz2006-06-27
| | | | | | | | | | | | | | | | | | Commit 02dd7ae2892e5ceff111d032769c78d3377df970 ("[PATCH] i2c-i801: Merge setup function") has a missing return 0 in the _probe() function. This means the error path is always executed and pci_disable_device() is called even when the device just got successfully enabled. Having the SMBus device disabled makes some systems (eg. Fujitsu-Siemens Lifebook E8010) hang hard during power-off. Intead of reverting the whole commit this patch fixes it up: - don't ever call pci_disable_device(), also not in the _remove() function to avoid hangs - fix missing pci_release_region() in error path Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds2006-06-23
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits) [POWERPC] re-enable OProfile for iSeries, using timer interrupt [POWERPC] support ibm,extended-*-frequency properties [POWERPC] Extra sanity check in EEH code [POWERPC] Dont look for class-code in pci children [POWERPC] Fix mdelay badness on shared processor partitions [POWERPC] disable floating point exceptions for init [POWERPC] Unify ppc syscall tables [POWERPC] mpic: add support for serial mode interrupts [POWERPC] pseries: Print PCI slot location code on failure [POWERPC] spufs: one more fix for 64k pages [POWERPC] spufs: fail spu_create with invalid flags [POWERPC] spufs: clear class2 interrupt status before wakeup [POWERPC] spufs: fix Makefile for "make clean" [POWERPC] spufs: remove stop_code from struct spu [POWERPC] spufs: fix spu irq affinity setting [POWERPC] spufs: further abstract priv1 register access [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts [POWERPC] spufs: dont try to access SPE channel 1 count [POWERPC] spufs: use kzalloc in create_spu [POWERPC] spufs: fix initial state of wbox file ... Manually resolved conflicts in: drivers/net/phy/Makefile include/asm-powerpc/spu.h
| * [POWERPC] Document I2C_MPC option for 86xx too.Jon Loeliger2006-06-21
| | | | | | | | | | | | | | The same I2C driver found on 85xx, etc., can be used for 86xx too. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | [PATCH] i2c-i801: Merge setup functionJean Delvare2006-06-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-i801: Merge setup function Merge i801_setup into i801_probe, as it doesn't make much sense to have them split. This lets us handle errors better. Christopher Hellwig had been suggesting this back in March 2003 when the driver was merged. Also drop two useless debug messages (revision and base address can be obtained from lspci, procfs or sysfs.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] i2c-i801: Better pci subsystem integrationJean Delvare2006-06-22
| | | | | | | | | | | | | | | | | | | | | | i2c-i801: Better pci subsystem integration Integrate the i2c-i801 driver better with the pci subsystem, by calling pci_{enable,disable}_device and requesting the I/O region by BAR rather than direct configuration space access. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] i2c-i801: CleanupsJean Delvare2006-06-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-i801: Cleanups Various cleanups to the i2c-i801 driver: * Fix documentation file and self file name references. * i801_setup can be marked __devinit. * Drop useless error local variable and label in i801_setup. * Avoid a double PCI configuration register write in some cases. * Use symbolic names for SMBHSTCFG bits. * Transmit the error code returned by i801_setup instead of forcing it to an arbitrary value. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] i2c-i801: Remove PCI function checkJean Delvare2006-06-22
| | | | | | | | | | | | | | | | | | | | | | i2c-i801: Remove PCI function check Remove the PCI function number check when probing devices. This check is redundant, each function has a separate PCI device ID, so checking for that ID is sufficient. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] i2c-i801: Remove force_addr parameterJean Delvare2006-06-22
| | | | | | | | | | | | | | | | | | | | | | i2c-i801: Remove force_addr parameter Remove the force_addr module parameter. It doesn't appear to ever have been needed, and PCI resources shouldn't be arbitrarily changed anyway. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] i2c-i801: Fix block transaction poll loopsJean Delvare2006-06-22
| | | | | | | | | | | | | | | | | | | | | | | | i2c-i801: Fix block transaction poll loops Two of the three poll loops have the poll and sleep swapped, causing an extra sleep to occur after the polled condition is fulfilled. In practice, this doubles the amount of sleep time for every block transaction. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] scx200_acb: Mark scx200_acb_probe __initJean Delvare2006-06-22
| | | | | | | | | | | | | | | | In i2c bus driver scx200_acb, function scx200_acb_probe can be tagged __init. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] scx200_acb: Use PCI I/O resource when appropriateJordan Crouse2006-06-22
| | | | | | | | | | | | | | | | | | On the CS5535 and CS5536, the I/O resource is allocated through PCI, so use that instead of using the MSR backdoor. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] i2c-ocores: Minor cleanupsPeter Korsgaard2006-06-22
| | | | | | | | | | | | | | | | | | | | Minor cleanup to the i2c-ocores driver. Peter Korsgaard will maintain the i2c-ocores driver. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] i2c: New bus driver for the OpenCores I2C controllerPeter Korsgaard2006-06-22
| | | | | | | | | | | | | | | | | | | | The following patch adds support for the OpenCores I2C controller IP core (See http://www.opencores.org/projects.cgi/web/i2c/overview). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] i2c: Suggest N for rare devices in KconfigJean Delvare2006-06-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improve the Kconfig help text of the follwing i2c drivers: * busses/i2c-pca-isa.c * chips/pcf8574.c * chips/pcf8591.c These are hard to detect and building them into the kernel results in long delays at boot. March 2006, thread "I2C_PCA_ISA causes boot delays" http://marc.theaimsgroup.com/?l=linux-kernel&m=114360399415744&w=2 April 2006, thread "i2c-related 1-minute hang during bootup" http://marc.theaimsgroup.com/?l=linux-kernel&m=114640992330721&w=2 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] I2C: i2c-nforce2: Add support for the nForce4 MCP51 and MCP55Jean Delvare2006-06-22
| | | | | | | | | | | | | | | | | | | | | | Add support for the new nForce4 MCP51 (also known as nForce 410 or 430) and nForce4 MCP55 to the i2c-nforce2 driver. Some code changes were required because the base I/O address registers have changed in these versions. Standard BARs are now being used, while the original nForce2 chips used non-standard ones. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] I2C: i2c-piix4: Document the IBM problem more clearlyJean Delvare2006-06-22
| | | | | | | | | | | | | | | | | | | | | | | | Properly document on which systems the i2c-piix4 SMBus driver will refuse to load. Hopefully this will make it clearer for users, which were often wondering why their destop or server systems were detected as laptops. Closes bug #6429. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] I2C: i2c-piix4: Remove the fix_hstcfg parameterRudolf Marek2006-06-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the fix_hstcfg option from the driver and related SMBus Interrupt Select register magic because now we know what are valid values for this register. This patch updates the documentation and adds new IRQ mode check so we are sure not to miss any new "unusual" value. The PCI quirk for users of fix_hstcfg was not developed because the chipset lacks of subsystem ID registers and DMI is stated "To be filled". Impact to existing systems is minimal because the problem showed up on motherboards like 10 years back. On the other hand users of newer Serverworks and HT1000 systems won't be misleaded by the message suggesting to try the fix_hstcfg any more. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] i2c-piix4: Add ATI IXP200/300/400 supportRudolf Marek2006-06-22
|/ | | | | | | | | This patch adds the ATI IXP southbridges support to i2c-piix4, as it turned out those chips are compatible with it. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] scx200_acb: fix section mismatch warningRandy Dunlap2006-05-26
| | | | | | | | | | WARNING: drivers/i2c/busses/scx200_acb.o - Section mismatch: reference to .init.text: from .text after 'scx200_add_cs553x' (at offset 0x528) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] scx200_acb: Fix for the CS5535 errataJordan Crouse2006-05-09
| | | | | | | | | | | | | | | | | | | | | | | This is a fix for the CS5535 errata 111: When the SMBus controller tries to access a non-existing device, it sets the NEGACK bit, SMBus I/O offset 01h[4], to 1 after it detects no acknowledge at the ninth clock. The specification states that the bit can be cleared by writing a 1 to it, but under certain circumstances it is possible for this bit to not clear. Writing a 0 to the bit resets the internal state machine and clears the issue. Since all writable bits in ACBST are W1C bits (write-one-to-clear) the second write doesn't affect any other logic except the buggy NEGACK state machine. The second write clears an internal register which is responsible for "overwriting" the NEGACK bit in ACBST. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] scx200_acb: Fix resource name use after freeJean Delvare2006-05-09
| | | | | | | | | | | | We can't pass a string on the stack to request_region. As soon as we leave the function that stack is gone and the string is lost. Let's use the same string we identify the i2c_adapter with instead, it's more simple, more consistent, and just works. This is the second half of fix to bug #6445. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] scx200_acb: Fix return on init errorJean Delvare2006-05-09
| | | | | | | | | | | | | The scx200_acb driver shouldn't return failure after initialization if it successfully registered at least one i2c_adapter, else we are leaking resources. The driver was OK in that respect up to 2.6.16, a recent change broke it. This is part of the fix to bug #6445. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c-i801: Fix resume when PEC is usedJean Delvare2006-04-20
| | | | | | | | | | | | | | | | | | Fix for bug #6395: Fail to resume on Tecra M2 with ADM1032 and Intel 82801DBM The BIOS of the Tecra M2 doesn't like it when it has to reboot or resume after the i2c-i801 driver has left the SMBus in PEC mode. The most simple fix is to clear the PEC bit after after every transaction. That's what this driver was doing up to 2.6.15 (inclusive). Thanks to Daniele Gaffuri for the very good report. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i2c-parport: Make type parameter mandatoryMark M. Hoffman2006-04-14
| | | | | | | | | | | | | | | | This patch forces the user to specify what type of adapter is present when loading i2c-parport or i2c-parport-light. If none is specified, the driver init simply fails - instead of assuming adapter type 0. This alleviates the sometimes lengthy boot time delays which can be caused by accidentally building one of these into a kernel along with several i2c slave drivers that have lengthy probe routines (e.g. hwmon drivers). Kconfig and documentation updated accordingly. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c-sis96x: Remove an init-time log messageMark M. Hoffman2006-04-14
| | | | | | | | | This patch removes an init-time kernel log message. http://marc.theaimsgroup.com/?l=linux-kernel&m=114232987208628&w=3 Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: i2c-ixp4xx: Add hwmon classAlessandro Zummo2006-03-23
| | | | | | | | This patch adds I2C_CLASS_HWMON to the ixp4xx bus driver. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: i2c-piix4: Add Broadcom HT-1000 supportMartin Devera2006-03-23
| | | | | | | | | | Add Broadcom HT-1000 south bridge's PCI ID to i2c-piix driver. Note that at least on Supermicro H8SSL it uses non-standard SMBHSTCFG = 3 and standard values like 0 or 9 causes hangup. Signed-off-by: Martin Devera <devik@cdi.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: i2c-amd756-s4882: Improve static mutex initializationJean Delvare2006-03-23
| | | | | | Static mutexes can be initialized at declaration time. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* [PATCH] I2C: i2c-ali1535: Drop redundant mutexJean Delvare2006-03-23
| | | | | | | | Drop a redundant mutex in driver i2c-ali1535. The struct i2c_adapter includes a mutex for the same purpose, operated by i2c-core. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: Fix i2c-ite name initializationJean Delvare2006-03-23
| | | | | | | | Properly set the name member of the i2c_adapter structure of the ite i2c adapter driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: Drop the i2c-frodo bus driverJean Delvare2006-03-23
| | | | | | | | Drop the i2c-frodo bus driver. It isn't referenced by the build system, and depends on code which was never included in 2.6 kernels. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: Semaphore to mutex conversions, part 3Jean Delvare2006-03-23
| | | | | | | | Cleanup after the semaphores to mutexes conversions in the i2c subsystem. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: Semaphore to mutex conversions, part 2Ingo Molnar2006-03-23
| | | | | | | | | | | | | semaphore to mutex conversion. the conversion was generated via scripts, and the result was validated automatically via a script as well. build tested. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: fix sx200_acb build on other archesJean Delvare2006-03-23
| | | | | | | | scx200_acb is only useful on a few Geode-based systems, and won't compile on non-x86 systems due to the lack of asm/msr.h, as reported by Andrew Morton. Thus, we should make that driver depend on X86. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* [PATCH] i2c: scx200_acb minimal documentation updateBen Gardner2006-03-23
| | | | | | | | scx200_acb: Minimal documentation update Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: scx200_acb fix and speed up the poll loopBen Gardner2006-03-23
| | | | | | | | scx200_acb: Fix and speed up the poll loop Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: scx200_acb add support for the CS5535/CS5536Ben Gardner2006-03-23
| | | | | | | scx200_acb: Add support for the CS5535/CS5536 Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* [PATCH] i2c: scx200_acb remove use of lock_kernelBen Gardner2006-03-23
| | | | | | | | scx200_acb: remove use of lock_kernel() Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-19 16:00:37 -0500