aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
Commit message (Collapse)AuthorAge
...
| * hwmon: (smsc47m1) Only request I/O ports we really useJean Delvare2009-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | The I/O area of the SMSC LPC47M1xx chips which we use, gives access to a lot of registers, some of which are related to fan speed monitoring and control, but many are not. At the moment, the smsc47m1 driver requests the whole I/O port range. This could easily result in resource conflicts with either ACPI or other drivers. Request only the I/O ports we really use, to prevent such conflicts. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Sean Fidler <fidlersean@gmail.com>
| * hwmon: New driver for AMD Family 10h/11h CPUsClemens Ladisch2009-12-16
| | | | | | | | | | | | | | | | This adds a driver for the internal temperature sensor of AMD Family 10h and 11h CPUs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | hwmon: I2C bus support for lis3lv02d and variant accelerometer chipsSamu Onkalo2009-12-17
|/ | | | | | | | | Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Éric Piel <eric.piel@tremplin-utc.net> Cc: Kalhan Trisal <kalhan.trisal@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lis3: scale output values to mgSamu Onkalo2009-12-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Report output values as 1/1000 of earth gravity. Output values from lis3 can be read from sysfs position entry and from input device. Input device can be accessed as event device and as joystick device. Joystick device can be in two modes. Meaning of the output values varies from case to case depending on the chip type and configuration (scale). Only joystick interface in JS_CORR_BROKEN mode returned somehow similar output values in different configurations. Joystick device is in that state by default in case of lis3. Position sysfs entry, input event device and raw joystick device have been little bit broken since meaning of the output values has been varied between 12 and 8 bit devices. Applications which relayed on those methods failed if the chip is different than the expected one. This patch converts output values to mean similar thing in different configurations. Both 8 and 12 bit devices reports now same acceleration values. If somebody implements full scale support to the driver, output values will still mean the same. Scaling factor and input device range must be updated in that case. Joystick interface in JS_CORR_BROKEN mode is not touched by this patch. All other interfaces have different scale after this change. For 12 bit device scaling factor is 0.977 which keeps scaled and unscaled values are quite close to each others. For 8 bit device, scaled values are 18 times bigger than unscaled values. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Éric Piel <Eric.Piel@tremplin-utc.net> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lis3: sysfs entry for setting chip measurement rateSamu Onkalo2009-12-15
| | | | | | | | | | | | It is possible to read position information at the chip measurement rate via sysfs. This patch adds possibility to configure chip measurement rate. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Signed-off-by: Éric Piel <Eric.Piel@tremplin-utc.net> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lis3lv02d: remove calibaration functionalitySamu Onkalo2009-12-15
| | | | | | | | | | | | Chip is calibrated by the manufacturer. There is no need to calibarate it at driver level. If the chip is used as a joystick, calibaration can be done using joystick device calibration mechanism. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Éric Piel <Eric.Piel@tremplin-utc.net> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lis3: selftest supportSamu Onkalo2009-12-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | Implement selftest feature as specified by chip manufacturer. Control: read selftest sysfs entry Response: "OK x y z" or "FAIL x y z" where x, y, and z are difference between selftest mode and normal mode. Test is passed when values are within acceptance limit values. Acceptance limits are provided via platform data. See chip spesifications for acceptance limits. If limits are not properly set, OK / FAIL decision is meaningless. However, userspace application can still make decision based on the numeric x, y, z values. Selftest is meant for HW diagnostic purposes. It is not meant to be called during normal use of the chip. It may cause false interrupt events. Selftest mode delays polling of the normal results but it doesn't cause wrong values. Chip must be in static state during selftest. Any acceration during the test causes most probably failure. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Éric Piel <Eric.Piel@tremplin-utc.net> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lis3lv02d: proper power on sequenceSamu Onkalo2009-12-15
| | | | | | | | | | | | | Lis3 accelerometer sensors have quite long power on delay (up to 125 ms). This patch adds necessary delay to power on sequence for currently supported lis3 chips. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Tested-by: Éric Piel <eric.piel@tremplin-utc.net> Acked-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lis3: fix show rate for 8 bits chipsÉric Piel2009-12-15
| | | | | | | | | | | | | | | | | Originally the driver was only targeted to 12bits sensors. When support for 8bits sensors was added, some slight difference in the registers were overlooked. This should fix it, both for initialization, and for displaying the rate. Reported-by: Kalhan Trisal <kalhan.trisal@intel.com> Reported-by: Christoph Plattner <christoph.plattner@gmx.at> Tested-by: Christoph Plattner <christoph.plattner@gmx.at> Tested-by: Samu Onkalo <samu.p.onkalo@nokia.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lis3: update documentation and commentsÉric Piel2009-12-15
| | | | | | | | | | | | Most of the documentation and comments were written when the driver was only supporting one type of chip, only via ACPI/HP. Update the info to the much clearer understanding that we have now. Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lis3lv02d: correct memory leak in module unloadSamu Onkalo2009-12-15
| | | | | | | | | | | polled input device itself was not free'd. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Tested-by: Éric Piel <eric.piel@tremplin-utc.net> Acked-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lis3lv02d: send sync eventSamu Onkalo2009-12-15
| | | | | | | | | | | | Send input_sync after each measurement round. This helps userspace to detect which reported values belongs to the same measurement. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Tested-by: Éric Piel <eric.piel@tremplin-utc.net> Acked-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon: w83627ehf updatesDaniel J Blueman2009-12-15
| | | | | | | | | | | | | | | | Add control of fan minimum turn-on output levels, decoupling it from the fan turn-off output level. Add control of rate of change of fan output level. These in turn allow lower turn-off rotor speed and smoother transitions for better thermal and acoustic control authority. Add support for constant fan speed and proportional-response operations modes. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: David Hubbard <david.c.hubbard@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* const: constify remaining dev_pm_opsAlexey Dobriyan2009-12-15
| | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* i2c: Drop I2C_CLIENT_INSMOD_2 to 8Jean Delvare2009-12-14
| | | | | | | | | These macros simply declare an enum, so drivers might as well declare it themselves. This puts an end to the arbitrary limit of 8 chip types per i2c driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
* i2c: Drop I2C_CLIENT_INSMOD_1Jean Delvare2009-12-14
| | | | | | | | This macro simply declares an enum, so drivers might as well declare it themselves. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
* i2c: Get rid of struct i2c_client_address_dataJean Delvare2009-12-14
| | | | | | | | | Struct i2c_client_address_data only contains one field at this point, which makes its usefulness questionable. Get rid of it and pass simple address lists around instead. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
* i2c: Drop the kind parameter from detect callbacksJean Delvare2009-12-14
| | | | | | | | The "kind" parameter always has value -1, and nobody is using it any longer, so we can remove it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
* Merge branch 'hwmon-for-linus' of ↵Linus Torvalds2009-12-09
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (41 commits) hwmon: (adt7475) Add VID support for the ADT7476 hwmon: (adt7475) Add an entry in MAINTAINERS hwmon: (adt7475) Add support for the ADT7476 hwmon: (adt7475) Voltage attenuators can be bypassed hwmon: (adt7475) Print device information on probe hwmon: (adt7475) Handle alternative pin functions hwmon: (adt7475) Move sysfs files removal to a separate function hwmon: (adt7475) Add support for the ADT7490 hwmon: (adt7475) Improve device detection hwmon: (adt7475) Add missing static marker hwmon: (adt7475) Rework voltage inputs handling hwmon: (adt7475) Implement pwm_use_point2_pwm_at_crit hwmon: (adt7475) New documentation hwmon: (adt7475) Add support for the ADT7473 hwmon: (f71882fg) Add support for the f71889fg (version 2) hwmon: (f71882fg) Fix sysfs file removal hwmon: (f71882fg) Cleanup sysfs attr creation 2/2 hwmon: (f71882fg) Cleanup sysfs attr creation 1/2 hwmon: (thmc50) Stop using I2C_CLIENT_MODULE_PARM hwmon: Add Freescale MC13783 ADC driver ...
| * hwmon: (adt7475) Add VID support for the ADT7476Jean Delvare2009-12-09
| | | | | | | | | | | | | | | | | | | | The ADT7476 has 5 dedicated pins for VID input, and the +12V input can optionally be used as a 6th VID pin. Add support for VID input. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
| * hwmon: (adt7475) Add support for the ADT7476Jean Delvare2009-12-09
| | | | | | | | | | | | | | | | | | | | | | | | Add support for the Analog Devices ADT7476 chip. This chip is largely compatible with the ADT7473 and ADT7475, with additional features. In particular, it has 5 voltage inputs instead of 2, and VID input pins. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
| * hwmon: (adt7475) Voltage attenuators can be bypassedJean Delvare2009-12-09
| | | | | | | | | | | | | | | | | | | | | | | | | | It is possible to bypass the voltage attenuators on the +2.5V, Vccp, +5V and +12V voltage monitoring inputs. This is useful to connect other voltage channels than the ones the monitoring chip was originally designed for. When this feature is enabled, we must not include the scaling factors in our computations. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
| * hwmon: (adt7475) Print device information on probeJean Delvare2009-12-09
| | | | | | | | | | | | | | | | | | | | Print the device name and revision at probe time, as well as a list of all optional features which are available. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
| * hwmon: (adt7475) Handle alternative pin functionsJean Delvare2009-12-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The TACH4 pin can be used for other functions, so fan4 may not always be available. Likewise, the PWM2 pin can be used for ALERT output, in which case pwm2 is not available For the ADT7490, the +2.5 Vin pin may also be used for other functions, in which case in0 is not available. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
| * hwmon: (adt7475) Move sysfs files removal to a separate functionJean Delvare2009-12-09
| | | | | | | | | | | | | | | | | | | | | | | | Move sysfs files removal to a separate function. The code is common to the device probing error path and the standard device removal path. As it will grow with future driver development, this avoids code duplication. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
| * hwmon: (adt7475) Add support for the ADT7490Jean Delvare2009-12-09
| | | | | | | | | | | | | | | | | | | | | | Add support for the Analog Devices ADT7490 chip. This chip is largely compatible with the ADT7473 and ADT7475, with additional features. In particular, it has 6 voltage inputs instead of 2. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
| * hwmon: (adt7475) Improve device detectionJean Delvare2009-12-09
| | | | | | | | | | | | | | | | | | | | Check the value of register 0x3f as part of the device detection, to make it more robust. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
| * hwmon: (adt7475) Add missing static markerJean Delvare2009-12-09
| | | | | | | | | | | | | | | | | | | | adt7475_attr_group is used internally only and can thus be marked static. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
| * hwmon: (adt7475) Rework voltage inputs handlingJean Delvare2009-12-09
| | | | | | | | | | | | | | | | | | | | | | Rework the handling of voltage inputs to make it possible and easy to support more inputs. This will be needed for the upcoming ADT7490 support. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
| * hwmon: (adt7475) Implement pwm_use_point2_pwm_at_critJean Delvare2009-12-09
| | | | | | | | | | | | | | | | | | | | | | Implement the non-standard pwm_use_point2_pwm_at_crit sysfs attribute as the adt7473 driver did. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
| * hwmon: (adt7475) Add support for the ADT7473Jean Delvare2009-12-09
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the ADT7473 to the adt7475 driver, and mark the adt7473 driver for removal. The ADT7473 and ADT7475 chips are almost the same chip and essentially compatible, so there's no point in having separate drivers for them. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
| * hwmon: (f71882fg) Add support for the f71889fg (version 2)Hans de Goede2009-12-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Fintek f71889fg to the f71882fg driver, many thanks to Gerd v. Egidy for providing (remote) access to a machine which such an ic. Note that this bit of the patch: - val = SENSORS_LIMIT(val, 0, 255); + + if (data->type == f71889fg) + val = SENSORS_LIMIT(val, -128, 127); + else + val = SENSORS_LIMIT(val, 0, 127); Changes behaviour for already supported models, the new behaviour is correct as the already supported models have bit 7 of the involved registers fixed at 0, so the previous behaviour which allowed setting temp zone limits > 127 was not correct. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (f71882fg) Fix sysfs file removalHans de Goede2009-12-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a bug in the old sysfs file removal, as it uses fxxxx_in_temp_attr to remove the in and temp sysfs attributes, but fxxxx_in_temp_attr has temp#_alarm, where as f71858fg_in_temp_attr has temp#_max_alarm, so the temp#_max_alarm attributes for the f71858fg never get removed. This patch fixes this by doing the sysfs removal exactly the same way as the creation instead of being (too) clever, this will also avoid similar bugs in the future. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (f71882fg) Cleanup sysfs attr creation 2/2Hans de Goede2009-12-09
| | | | | | | | | | | | | | | | | | | | | | This patch merges the f71882fg_auto_pwm_attr array into the fxxxx_fan_attr resp. fxxxx_auto_pwm_attr array, as the f71882fg_auto_pwm_attr array was merely extending these 2 with entries for a 4th fan, it also makes these 2 arrays 2 dimensional so that the rest of the code can choose to add attr for 3 or 4 fans without needing to know the nr of attr per fan. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (f71882fg) Cleanup sysfs attr creation 1/2Hans de Goede2009-12-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes a number of cleanups to the sysfs attr creation in the f71882fg driver, this is a preparation patch for adding f71889fg support: * Add some comments to explain why some models need separate sysfs attr arrays for in / temp / fan / pwm * Rename a number of sysfs attr arrays to make their function clearer * Move the pwm#_auto_channels_temp attribute from the common to all models fan attr array to the per model auto mode pwm attr arrays, so that all the auto mode pwm attr are grouped together, and thus can be left out on models where we don't support auto pwm mode * Put fan_beep attr in their own array, so that only auto mode pwm attr remain in the per model pwm sysfs attr arrays. * Put the 4th special fan input for the f8000 in its own array, so that only auto mode pwm attr remain in the per model pwm sysfs attr arrays. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (thmc50) Stop using I2C_CLIENT_MODULE_PARMJean Delvare2009-12-09
| | | | | | | | | | | | | | | | The thmc50 driver is the last user of I2C_CLIENT_MODULE_PARM, and I would like to get rid of that macro. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Krzysztof Helt <krzysztof.h1@wp.pl>
| * hwmon: Add Freescale MC13783 ADC driverLuotao Fu2009-12-09
| | | | | | | | | | | | | | | | | | | | | | | | | | This driver provides support for the ADC integrated into the Freescale MC13783 PMIC. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Cc: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (w83791d) Remove experimental dependencyMarc Hulsman2009-12-09
| | | | | | | | | | | | | | | | The w83791d driver has been in the kernel for a while now, time to remove the EXPERIMENTAL dependency. Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: Clean up detect functionsJean Delvare2009-12-09
| | | | | | | | | | | | | | | | | | | | | | | | As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Corentin Labbe <corentin.labbe@geomatys.fr> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Riku Voipio <riku.voipio@iki.fi> Acked-by: "Hans J. Koch" <hjk@linutronix.de> Cc: Rudolf Marek <r.marek@assembler.cz>
| * hwmon: (w83l785ts) Clean up detect functionJean Delvare2009-12-09
| | | | | | | | | | | | As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (w83792d) Clean up detect functionJean Delvare2009-12-09
| | | | | | | | | | | | As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (w83791d) Clean up detect functionJean Delvare2009-12-09
| | | | | | | | | | | | | | As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Marc Hulsman <m.hulsman@tudelft.nl>
| * hwmon: (w83781d) Clean up detect functionJean Delvare2009-12-09
| | | | | | | | | | | | As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (tmp401/tmp421) Clean up detect functionsJean Delvare2009-12-09
| | | | | | | | | | | | | | As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Andre Prendel <andre.prendel@gmx.de>
| * hwmon: (lm90) Clean up detect functionJean Delvare2009-12-09
| | | | | | | | | | | | As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (lm85) Clean up detect functionJean Delvare2009-12-09
| | | | | | | | | | | | As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (lm83) Clean up detect functionJean Delvare2009-12-09
| | | | | | | | | | | | As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (lm77) Clean up detect functionJean Delvare2009-12-09
| | | | | | | | | | | | As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (adm1025) Clean up detect functionJean Delvare2009-12-09
| | | | | | | | | | | | As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (adm1021) Clean up detect functionJean Delvare2009-12-09
| | | | | | | | | | | | As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare <khali@linux-fr.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-10-31 09:43:22 -0400