aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
Commit message (Collapse)AuthorAge
* hwmon: New driver for the SMSC EMC6W201Jean Delvare2011-05-25
| | | | | | | | | | | This is a new driver for the SMSC EMC6W201 hardware monitoring device. The device is functionally close to the EMC6D100 series, but is register-incompatible. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Harry G McGavran Jr <w5pny@arrl.net> Tested-by: Jeff Rickman <jrickman@myamigos.us> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (abituguru) Depend on DMIJean Delvare2011-05-25
| | | | | | | | | | | | | | | | | The abituguru drivers are only built on X86, where DMI support is now enabled by default. So let these drivers depend on DMI, for the following gains: * Robustness and safety. Detection of these devices is weak and uses non-standard methods, it should really be limited to Abit boards unless the user explicitly asks otherwise. * Code simplicity. The code is easier to read without ifdefs. * Better build testing coverage. Now there's only one way to build the drivers, so no risk of build failure on exotic systems. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Alistair John Strachan <alistair@devzero.co.uk> Acked-by: Hans de Goede <hdegoede@redhat.com>
* hwmon: (it87) Use request_muxed_regionNat Gurumoorthy2011-05-25
| | | | | | | | | | | | Serialize access to the hardware by using "request_muxed_region" macro defined by Alan Cox. Call to this macro will hold off the requestor if the resource is currently busy. "superio_enter" will return an error if call to "request_muxed_region" fails. Rest of the code change is to ripple an error return from superio_enter to the top level. Signed-off-by: Nat Gurumoorthy <natg@google.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (sch5627) Trigger Vbat measurementsHans de Goede2011-05-25
| | | | | | | | | The sch5627 needs to be explicitly told to start an adc conversion for Vbat, once in a while. Without this Vbat may read 0, and will never get updated. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (sch5627) Add sch5627_send_cmd functionHans de Goede2011-05-25
| | | | | | | | This patch generalizes sch5627_read_virtual_reg so that it can be used to write virtual regs too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Sigend-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (max6650) Properly support the MAX6650Jean Delvare2011-05-25
| | | | | | | | The MAX6650 has only one fan input. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: "Hans J. Koch" <hjk@hansjkoch.de> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (max6650) Drop device detectionJean Delvare2011-05-25
| | | | | | | | | | MAX6650 device detection is unreliable, we got reports of false positives. We now have many ways to let users instantiate the devices explicitly, so unreliable detection should be dropped. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: "Hans J. Koch" <hjk@hansjkoch.de> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
* Move ACPI power meter driver to hwmonJean Delvare2011-05-25
| | | | | | | | | | | | | As discussed earlier, the ACPI power meter driver would better live in drivers/hwmon, as its only purpose is to create hwmon-style interfaces for ACPI 4.0 power meter devices. Users are more likely to look for it there, and less likely to accidentally hide it by unselecting its dependencies. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: "Darrick J. Wong" <djwong@us.ibm.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Len Brown <lenb@kernel.org>
* hwmon: (f71882fg) Add support for F71808AHans de Goede2011-05-25
| | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (f71882fg) Split has_beep in fan_has_beep and temp_has_beepHans de Goede2011-05-25
| | | | | | | Needed for upcoming support of the F71808A. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (asc7621) Drop duplicate dependencyJean Delvare2011-05-25
| | | | | | | | The config SENSORS_ASC7621 entry is inside an if HWMON / endif block, so it already depends on HWMON. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (jc42) Change detection classJean Delvare2011-05-25
| | | | | | | | While the JC42-compatible chips are temperature sensors, I2C_CLASS_SPD makes more sense because these chips always live on memory modules. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: Add driver for AMD family 15h processor power informationAndreas Herrmann2011-05-25
| | | | | | | | | | | | | | | | | | This CPU family provides NB register values to gather following TDP information * ProcessorPwrWatts: Specifies in Watts the maximum amount of power the processor can support. * CurrPwrWatts: Specifies in Watts the current amount of power being consumed by the processor. This driver provides * power1_crit (ProcessorPwrWatts) * power1_input (CurrPwrWatts) Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (k10temp) Add support for Fam15h (Bulldozer)Andre Przywara2011-05-25
| | | | | | | | | | | | AMDs upcoming CPUs use the same mechanism for the internal temperature reporting as the Fam10h CPUs, so we just needed to add the appropriate PCI-ID to the list. This allows to use the k10temp driver on those CPUs. While at it change the Kconfig entry to be more generic. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Use helper functions to set and get driver dataJean Delvare2011-05-25
| | | | | | | | Use helper functions to set and get driver data. This is more elegant. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (coretemp) Add comments describing the handling of HT CPUsGuenter Roeck2011-05-24
| | | | | | | | | | | | | | | | | | | | The coretemp driver provides a single set of device attributes for each physical core of a HT CPU to avoid duplicate sensors. This functionality was introduced with commit d883b9f09772 ("hwmon: (coretemp) Skip duplicate CPU entries"). Commit e40cc4bdfd4b ("x86/hwmon: register alternate sibling upon CPU removal") extends this functionality to register the HT sibling of a CPU which is taken offline, to ensure that sensor attributes are provided if at least one HT sibling of a core is online. Add comments into the code describing the functionality in some more detail. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon: (coretemp) Fix compile error if CONFIG_SMP is not definedGuenter Roeck2011-05-23
| | | | | | | | | | | | | cpu_sibling_mask() is not defined unless CONFIG_SMP is defined, so it must not be used directly in the code without ifdef protection. To solve the problem and avoid ifdefs in the code, define for_each_sibling() and use it instead. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon: (coretemp) Fix checkpatch errorsGuenter Roeck2011-05-21
| | | | | | | | | Fix remaining checkpatch errors in the coretemp driver. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Acked-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Remove pkgtemp driverGuenter Roeck2011-05-21
| | | | | | | | | After the merge of pkgtemp functionality into the coretemp driver, the pkgtemp driver is no longer necessary. Remove it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (coretemp) Merge pkgtemp with coretempDurgadoss R2011-05-20
| | | | | | | | | | | | | | This patch merges the pkgtemp with coretemp driver. The sysfs interfaces for all cores in the same pkg are shown under one directory, in hwmon. It also supports CONFIG_HOTPLUG_CPU. So, the sysfs interfaces are created when each core comes online and are removed when it goes offline. Signed-off-by: Durgadoss R <durgadoss.r@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> [guenter.roeck@ericsson.com: Fixed section reference errors] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (pmbus) Add support for Analog Devices ADM1275Guenter Roeck2011-05-19
| | | | | | | | Add support for Analog Devices ADM1275 Hot-Swap Controller and Digital Power Monitor Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
* hwmon: (pmbus) Support for TI UCD90xxx series Sequencer and System Health ↵Guenter Roeck2011-05-19
| | | | | | | | | | Controllers Hardware monitoring support for TI UCD90120, UCD90124, UCD9090, and UCD90910 Sequencer and System Health Controllers. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
* hwmon: (pmbus) Add support for TI UCD9200 series of PWM System ControllersGuenter Roeck2011-05-19
| | | | | | | | This patch adds hardware monitoring support for TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248 Digital PWM System Controllers. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
* hwmon: (pmbus) Use device specific function to read fan configurationGuenter Roeck2011-05-19
| | | | | | | | Fan control implementation tends to be device specific, so start using the device specific function call to read fan configuration registers. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
* hwmon: (pmbus) Expand scope of device specific get_status functionGuenter Roeck2011-05-19
| | | | | | | | | Some devices use non-standard registers to access various functionality. This does not only affect status registers, but other registers as well. Rename local get_status function to get_byte_data to reflect this requirement. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
* hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registersGuenter Roeck2011-05-19
| | | | | | | | | This commit replaces hard-coded sensor and limit register detection code with table based sensor detection. This change eliminates code block repetition and reduces code size. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
* hwmon: Driver for MAX16065 System Manager and compatiblesGuenter Roeck2011-05-19
| | | | | | | | | This patch adds hardware monitoring support for Maxim MAX16065, MAX16066, MAX16067, MAX16068, MAX16070, and MAX16071 flash-configurable system managers with nonvolatile fault registers. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (sht15) add support for CRC validationJerome Oufella2011-05-19
| | | | | | | | | | The sht15 sensor allows validating exchanges to and from the device using a crc8 function. An utility function to reverse a byte has also been added. Signed-off-by: Jerome Oufella <jerome.oufella@savoirfairelinux.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (sht15) add support for the status registerVivien Didelot2011-05-19
| | | | | | | | | | | | | * Add support for: - Heater. - End of battery notice. - Ability not to reload from OTP. - Low resolution (12bit temp, 8bit humidity). * Add an utility function to read individual bytes from the device. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (sht15) clean-up the probe functionVivien Didelot2011-05-19
| | | | | | | | | | | * Move the creation of sysfs attributes after the end of the initialization, and remove them in the error path. * Release regulator in the error path. * Add a soft reset command (need to wait 11ms before next command). Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (sht15) general code clean-upVivien Didelot2011-05-19
| | | | | | | | | | | | * Add a documentation file for the device. * Respect a bit more the kernel-doc syntax. * Rename some variables for clarity. * Use bool type for flags. * Use an enum for states (actions being done). Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: Add support for MAX6642Per Dalén2011-05-19
| | | | | | | | MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor with Overtemperature Alarm from Maxim. Signed-off-by: Per Dalen <per.dalen@appeartv.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (twl4030-madc-hwmon) Return proper error if hwmon_device_register failsAxel Lin2011-05-01
| | | | | | | | The driver did not return an error if the call to hwmon_device_register failed. Fix by returning the error reported from hwmon_device_register. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (lm85) Fix error paths in probe functionJean Delvare2011-04-29
| | | | | | | | | | We must remove all files we created, even in error cases. Fixes second part of kernel bug #34072: https://bugzilla.kernel.org/show_bug.cgi?id=34072 Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (lm85) Add missing list terminatorsJean Delvare2011-04-29
| | | | | | | | Fixes kernel bug #34072: https://bugzilla.kernel.org/show_bug.cgi?id=34072 Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (adm1021) Clarify documentation regarding Xeon processorsJean Delvare2011-04-29
| | | | | | | | | | | Recent Xeon processor thermal sensors are supported by the coretemp driver and not the adm1021 driver. Only one old generation of Xeon processors (the first Netburst ones) are supported by the adm1021 driver. Reported-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (lm90) Add support for ADT7461A and NCT1008Guenter Roeck2011-04-29
| | | | | | | | | This patch adds support for ADT7461A and NCT1008 to the lm90 driver. Both chips have identical functionality and report the same manufacturing ID and device ID values. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (pmbus) Removed unused variable from struct pmbus_dataGuenter Roeck2011-04-19
| | | | | | | | struct pmbus_data included an unused variable named status_bits. Remove it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
* Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds2011-04-07
|\ | | | | | | | | * 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
| * Fix common misspellingsLucas De Marchi2011-03-31
| | | | | | | | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* | hwmon: twl4030-madc-hwmon: add "platform:" prefix for platform modaliasAxel Lin2011-03-29
|/ | | | | | | | | | Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS with "platform:"), the platform modalias is prefixed with "platform:". Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* drivers: Final irq namespace conversionThomas Gleixner2011-03-29
| | | | | | Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge branch 'hwmon-for-linus' of ↵Linus Torvalds2011-03-27
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (pmbus) Fix temperature limit register access
| * hwmon: (pmbus) Fix temperature limit register accessGuenter Roeck2011-03-26
| | | | | | | | | | | | | | | | | | | | Commit 8677011 added auto-update to temperature limit registers. Unfortunately, the update flag is also used to determine if an attribute is writable, which results in read-only temperature limit registers. To fix the problem, pass 'readonly' as separate flag to the function used to add sensor attributes. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* | hwmon: (f71882fg) Add support for the F71889AHans de Goede2011-03-26
| | | | | | | | | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | hwmon: (f71882fg) Add support for the F81865FJean Delvare2011-03-26
| | | | | | | | | | | | | | | | | | | | Add support for the Fintek F81865F. It's essentially compatible with the F71882FG, but has fewer inputs: 7 voltage, 2 temperature and 2 fan inputs only. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
* | hwmon: (f71882fg) Document all supported devicesJean Delvare2011-03-26
| | | | | | | | | | | | | | | | | | | | The list of supported devices was not always well documented in all places. Clarify and list all devices in documentation, Kconfig and the driver itself. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
* | hwmon: (f71882fg) Per-chip fan/temperature input count tablesJean Delvare2011-03-26
| | | | | | | | | | | | | | | | | | | | | | | | Use tables to list the count of fan and temperature inputs for all supported chips, almost similar to (but more simple than) what is already done for voltage inputs. This avoids repeating the same tests in different functions, and will make it easier to add support for chips with a different count of fan or temperature inputs. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
* | hwmon: (f71882fg) Secure chip property definition arraysJean Delvare2011-03-26
|/ | | | | | | | | Using C99-style array initialization will ensure definitions won't drift if the chips enum gets new values added. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
* jz4740: silence warnings related to mfd_get_cell changesAndres Salomon2011-03-23
| | | | | | | | | mfd_get_cell returns a const, so change the jz4740 clients to store a const mfd cell. This silences type mismatch warnings. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-04 00:23:24 -0500