aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
Commit message (Collapse)AuthorAge
* hwmon: (lm78) Add missing __devexit_p()Mike Frysinger2009-06-01
| | | | | | | | The remove function uses __devexit, so the .remove assignment needs __devexit_p() to fix a build error with hotplug disabled. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (w83781d) Fix W83782D support (NULL pointer dereference)Jean Delvare2009-05-08
| | | | | | | | | | | | Commit 360782dde00a2e6e7d9fd57535f90934707ab8a8 (hwmon: (w83781d) Stop abusing struct i2c_client for ISA devices) broke W83782D support for devices connected on the ISA bus. You will hit a NULL pointer dereference as soon as you read any device attribute. Other devices, and W83782D devices on the SMBus, aren't affected. Reported-by: Michel Abraham Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Michel Abraham
* hwmon: (asus_atk0110) Fix compiler warningLuca Tettamanti2009-05-08
| | | | | | | atk_sensor_type is only used when DEBUG is defined. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: sht15 humidity sensor driverJonathan Cameron2009-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Data sheet at: http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf These sensors communicate over a 2 wire bus running a device specific protocol. The complexity of the driver is mainly due to handling the substantial delays between requesting a reading and the device pulling the data line low to indicate that the data is available. This is handled by an interrupt that is disabled under all other conditions. I wasn't terribly clear on the best way to handle this, so comments on that aspect would be particularly welcome! Interpretation of the temperature depends on knowing the supply voltage. If configured in a board config as a regulator consumer this is obtained from the regulator subsystem. If not it should be provided in the platform data. I've placed this driver in the hwmon subsystem as it is definitely a device that may be used for hardware monitoring and with it's relatively slow response times (up to 120 millisecs to get a reading) a caching strategy certainly seems to make sense! Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hp_accel: remove unused #include <version.h>Huang Weiyi2009-04-13
| | | | | | | | | Remove unused #include <version.h> in drivers/hwmon/hp_accel.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds2009-04-07
|\ | | | | | | | | | | * 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: Add Asus ATK0110 support hwmon: (lm95241) Convert to new-style i2c driver
| * hwmon: Add Asus ATK0110 supportLuca Tettamanti2009-04-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Asus boards have an ACPI interface for interacting with the hwmon (fan, temperatures, voltages) subsystem; this driver exposes the relevant information via the standard sysfs interface. There are two different ACPI interfaces: - an old one (based on RVLT/RFAN/RTMP) - a new one (GGRP/GITM) Both may be present but there a few cases (my board, sigh) where the new interface is just an empty stub; the driver defaults to the old one when both are present. The old interface has received a considerable testing, but I'm still awaiting confirmation from my tester that the new one is working as expected (hence the debug code is still enabled). Currently all the attributes are read-only, though a (partial) control should be possible with a bit more work. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (lm95241) Convert to new-style i2c driverJean Delvare2009-04-07
| | | | | | | | | | | | | | | | The legacy i2c binding model is going away really soon now, so convert the lm95241 driver to the new binding model or it will break. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Davide Rizzo <elpa.rizzo@gmail.com>
* | hwmon: add support for GMT G760A fan speed PWM controllerHerbert Valerio Riedel2009-04-07
|/ | | | | | | | | | | | | | | This controller can be found on the D-Link DNS-323 for instance, where it is to be configured via static i2c_board_info in the board-specific mach-orion/dns323-setup.c; this driver supports only the new-style driver model. Tested-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Matthew Palmer <mpalmer@debian.org> Signed-off-by: Laurie Bradshaw <bradshaw.laurie@googlemail.com> Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-04-03
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) trivial: Update my email address trivial: NULL noise: drivers/mtd/tests/mtd_*test.c trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h trivial: Fix misspelling of "Celsius". trivial: remove unused variable 'path' in alloc_file() trivial: fix a pdlfush -> pdflush typo in comment trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL trivial: wusb: Storage class should be before const qualifier trivial: drivers/char/bsr.c: Storage class should be before const qualifier trivial: h8300: Storage class should be before const qualifier trivial: fix where cgroup documentation is not correctly referred to trivial: Give the right path in Documentation example trivial: MTD: remove EOL from MODULE_DESCRIPTION trivial: Fix typo in bio_split()'s documentation trivial: PWM: fix of #endif comment trivial: fix typos/grammar errors in Kconfig texts trivial: Fix misspelling of firmware trivial: cgroups: documentation typo and spelling corrections trivial: Update contact info for Jochen Hein trivial: fix typo "resgister" -> "register" ...
| * trivial: Update my email addressRiku Voipio2009-03-30
| | | | | | | | | | | | | | Update my email address. Signed-off-by: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | lis3: SPI transport layerDaniel Mack2009-04-01
| | | | | | | | | | | | | | | | | | | | | | | | Make use of the new abstraction layer and add a new transport layer for spi. Works fine on a PXA based board. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | lis3: solve dependency between core and ACPIDaniel Mack2009-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | This solves the dependency between lis3lv02d.[ch] and ACPI specific methods. It introduces a ->bus_priv pointer to the device struct which is casted to 'struct acpi_device' in the ACIP layer. Changed hp_accel.c accordingly. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | lis3: reorder functions to make forward decl obsoleteDaniel Mack2009-04-01
| | | | | | | | | | | | | | | | | | | | | | Move lis3lv02d_init_device() down so that the forward declaration of lis3lv02d_add_fs() becomes unnecessary. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | hp_accel: axis conversion for hp compaq 8710wLuca Cappa2009-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I have a laptop HP Compaq 8710W, I compiled into my kernel the LIS3LV02DL and HP_ACCEL module drivers. While loading it cannot recognize the laptop model, so i am sending the necessary information to update the database of axis orientations. >When the laptop is horizontal the position reported is about 0 for X and Y >and a positive value for Z Yes, it is about 0,0,1000, the actual reading says: (-17,-26,1018); > If the left side is elevated, X increases (becomes positive) Yes, X goes toward to positive 1000. >If the front side (where the touchpad is) is elevated, Y decreases (becomes negative) No, Y goes toward to positive 1000. >If the laptop is put upside-down, Z becomes negative Yes, the laptop on a table Z gives 1000, and if upsidedown the Z reads -1000. So in few words the Y axis is inverted. Cc: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | hp_accel: add two more axis informationPavel Machek2009-04-01
| | | | | | | | | | | | | | | | | | | | | | | | Add two more laptops to whitelist. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Pavel Machek <pavel@ucw.cz> Cc: Daniel Mack <daniel@caiaq.de> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Vladimir Botka <vbotka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | hwmon: Add LTC4215 driverIra Snyder2009-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Linux support for the Linear Technology LTC4215 Hot Swap controller I2C monitoring interface. I have tested the driver with my board, and it appears to work fine. With the power supplies disabled, it reads 11.93V input, 1.93V output, no current and no power. With the supplies enabled, it reads 11.93V input, 11.98V output, no current, no power. I'm not drawing any current at the moment, so this is reasonable. The value in the sense register never reads anything except 0, so I expect to get zero from the current and power calculations. I didn't attempt to support changing any of the chip's settings or enabling the FET. I'm not sure even how to do that and still fit within the hwmon framework. :) Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Cc: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | hwmon: LM95241 driverDavide Rizzo2009-04-01
| | | | | | | | | | | | | | | | | | | | | | An hwmon driver for the National Semiconductor LM95241 triple temperature sensors chip Signed-off-by: Davide Rizzo <elpa-rizzo@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | hp_accel: adev is poor name of exported symbolPavel Machek2009-04-01
| | | | | | | | | | | | | | | | | | | | | | | | As Andrew noted, adev is pretty poor name for symbol being exported. Rename it to lis3. Signed-off-by: Pavel Machek <pavel@ucw.cz> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Vladimir Botka <vbotka@suse.cz> Cc: <Quoc.Pham@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | hwmon: (fschmd) Add support for the FSC Hades ICHans de Goede2009-03-30
| | | | | | | | | | | | | | Add support for the Hades to the FSC hwmon driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | hwmon: (fschmd) Add support for the FSC Syleus ICHans de Goede2009-03-30
| | | | | | | | | | | | | | | | Many thanks to Fujitsu Siemens Computers for providing docs and a machine to test the driver on. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | dmi: Let dmi_walk() users pass private dataJean Delvare2009-03-30
| | | | | | | | | | | | | | | | | | | | | | At the moment, dmi_walk() lacks flexibility, users can't pass data to the callback function. Add a pointer for private data to make this function more flexible. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Roland Dreier <rolandd@cisco.com>
* | Move the pcf8591 driver to hwmonJean Delvare2009-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Directory drivers/i2c/chips is going away, so drivers there must find new homes. For the pcf8591 driver, the best choice seems to be the hwmon subsystem. While the Philips PCF8591 device isn't a typical hardware monitoring chip, its DAC interface is compatible with the hwmon one, so it fits somewhat. If a better subsystem is ever created for ADC/DAC chips, the driver could be moved there. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
* | hwmon: (w83627ehf) Only expose in6 or temp3 on the W83667HGGong Jun2009-03-30
| | | | | | | | | | | | | | | | | | The pin for in6 and temp3 is shared on the W83667HG, so only one of these features can be supported on any given system. Let the driver select which one depending on the temp3 disabled bit. Signed-off-by: Gong Jun <JGong@nuvoton.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | hwmon: (w83627ehf) Add support for W83667HGGong Jun2009-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | Add initial support for the Nuvoton W83667HG chip to the w83627ehf driver. It has been tested on ASUS P5QL PRO by Gong Jun. At the moment there is still a usability issue which is that only in6 or temp3 can be present on the W83667HG, so the driver shouldn't expose both. This will be addressed later. Signed-off-by: Gong Jun <JGong@nuvoton.com> Acked-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | hwmon: (w83627ehf) Invert fan pin variables logicJean Delvare2009-03-30
| | | | | | | | | | | | | | | | Use positive logic for fan pin variables (variable is set if pin is used for fan), instead of negative logic which is error prone. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Gong Jun <JGong@nuvoton.com>
* | hwmon: (hdaps) Fix Thinkpad X41 axis inversionFrank Seidel2009-03-30
| | | | | | | | | | | | | | | | Fix for kernel.org bug #7154: hdaps inversion of actual Thinkpad X41's Y-axis. Signed-off-by: Frank Seidel <frank@f-seidel.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | hwmon: (hdaps) Allow inversion of separate axisFrank Seidel2009-03-30
| | | | | | | | | | | | | | | | Fix for kernel.org bug #7154: hdaps inversion of each axis. This version is based on the work from Michael Ruoss <miruoss@student.ethz.ch>. Signed-off-by: Frank Seidel <frank@f-seidel.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | hwmon: (ds1621) Avoid unneeded register accessJean Delvare2009-03-30
| | | | | | | | | | | | | | | | | | | | Register access over SMBus isn't cheap, so avoid register access where possible: * Only write back the configuration register if it changed. * Don't refresh the register cache when we don't have to. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
* | hwmon: (ds1621) Clean up register accessJean Delvare2009-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a few oddities in how the ds1621 driver accesses the registers: * We don't need a wrapper to access the configuration register. * Check for error before calling swab16. Error checking isn't complete yet, but that's a start. * Device-specific read functions should never be called during detection, as by definition we don't know what device we are talking to at that point. * Likewise, don't assume that register reads succeed during detection. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
* | hwmon: (ds1621) Reorder code statementsJean Delvare2009-03-30
|/ | | | | | | | Reorder the ds1621 driver code so that we can get rid of forward function declarations. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
* hwmon: (f75375s) Remove unnecessary and confusing initializationAndrew Klossner2009-03-12
| | | | | | | | | | | | | | f75375_probe calls i2c_get_clientdata to initialize the data pointer, but there isn't yet any client data to get, and the value is never used before the variable is assigned a new value seven lines later. The call doesn't hurt anything and wastes only a couple of cycles. The reason to fix it is because this module serves as an example to hackers writing new hwmon drivers, and this part of the example is confusing. Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (it87) Properly decode -128 degrees C temperatureJean Delvare2009-03-12
| | | | | | | | The it87 driver is reporting -128 degrees C as +128 degrees C. That's not a terribly likely temperature value but let's still get it right, especially when it simplifies the code. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Document support for the MAX6648/6692 chipsDarrick J. Wong2009-03-12
| | | | | | | Update documentation to prevent further confusion/duplication. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (abituguru3) Fix I/O error handlingJean Delvare2009-03-12
| | | | | | | | | | Fix a logic bug reported by Roel Kluin, by rewriting the error handling code in a clearer way. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Roel Kluin <roel.kluin@gmail.com> Acked-by: Alistair John Strachan <alistair@devzero.co.uk> Acked-by: Hans de Goede <hdegoede@redhat.com>
* lm85: add VRM10 support for adt7468 chipDarrick J. Wong2009-03-10
| | | | | | | | | | The adt7468 chip supports VRM10 sensors just like the adt7463; add a missing check for it. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lm85: fix the version check that broke adt7468 probingDarrick J. Wong2009-03-10
| | | | | | | | | | | | | | The verstep check in the lm85 driver fails because the upper nibble of the version register is 0x7, not 0x6, on the adt7468 chip. Probing of all adt7468s was broken by 69fc1feba2d5856ff74dedb6ae9d8c490210825c ("hwmon: (lm85) Rework the device detection"), and this patch fixes that. Also add in a missing i2c_device_id that accidentally got dropped from the original patch. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lis3lv02d: add axes knowledge of HP Pavilion dv5 modelsGiuseppe Bilotta2009-02-18
| | | | | | | | | | | | | | | | Add support for HP Pavilion dv5. Since Intel-based models have an inverted x axis, while AMD-based models have an inverted y axis, we introduce a new macro that special-cases axis orientation based on two DMI entries: HP dv5 axis configuration is then based on both the PRODUCT and BOARD name. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Cc: Eric Piel <Eric.Piel@tremplin-utc.net> Cc: Pavel Machek <pavel@suse.cz> Tested-by: Palatis Tseng <palatis@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lis3lv02d: support both one- and two-byte sensorsGiuseppe Bilotta2009-02-18
| | | | | | | | | | | | | | | | | | | | | Sensors responding with 0x3B to WHO_AM_I only have one data register per direction, thus returning a signed byte from the position which is occupied by the MSB in sensors responding with 0x3A. Since multiple sensors share the reply to WHO_AM_I, we rename the defines to better indicate what they identify (family of single and double precision sensors). We support both kind of sensors by checking for the sensor type on init and defining appropriate data-access routines and sensor limits (for the joystick) depending on what we find. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Acked-by: Eric Piel <Eric.Piel@tremplin-utc.net> Cc: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hp accelerometer: add freefall detectionPavel Machek2009-02-18
| | | | | | | | | | | | | | | This adds freefall handling to hp_accel driver. According to HP, it should just work, without us having to set the chip up by hand. hpfall.c is example .c program that parks the disk when accelerometer detects free fall. It should work; for now, it uses fixed 20seconds protection period. Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Thomas Renninger <trenn@suse.de> Cc: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon: Fix ACPI resource check error handlingHans de Goede2009-02-17
| | | | | | | | | | This patch fixes a number of cases where things were not properly cleaned up when acpi_check_resource_conflict() returned an error, causing oopses such as the one reported here: https://bugzilla.redhat.com/show_bug.cgi?id=483208 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (f71882fg) Hide misleading error messageJean Delvare2009-02-17
| | | | | | | | | | | | | If the F71882FG chip is at address 0x4e, then the probe at 0x2e will fail with the following message in the logs: f71882fg: Not a Fintek device This is misleading because there is a Fintek device, just at a different address. So I propose to degrade this message to a debug message. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com>
* lis3lv02d: add axes knowledge for HP 6710Martin Kebert2009-02-05
| | | | | | | | | | | Add support for the HP laptops of model 6710x for having correctly setup axes. Signed-off-by: Martin Kebert <gkmarty@gmail.com> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lis3lv02d: add axes knowledge for HP 6730Pavel Herrmann2009-02-05
| | | | | | | | | | | Add support for the HP laptops of model 6730x for having correctly setup axes. Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lis3lv02d: add axes knowledge for HP 6530Eric Piel2009-02-05
| | | | | | | | | | | Add support for the HP laptops of model 6530x for having correctly setup axes. Reported-by: Jerome Poulin <jeromepoulin@gmail.com> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lis3lv02d: add axes knowledge for HP 6510bJiri Tersel2009-02-05
| | | | | | | | | | | According to dmesg my laptop model HP 6510b is not being recognized by this driver. After I have modified "lis3lv02d.c" axes in Neverball are OK. Signed-off-by: Jiri Tersel <tersel@mail.muni.cz> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon: applesmc: add support for MacPro 3 temperature sensorsBharath Ramesh2009-01-29
| | | | | | | | | | | MacPro 3 have more temperature sensors than the previous MacPro's also the sensor THTG has been removed. This patch add supports for the newer temperature sensors in the MacPro3. Signed-off-by: Bharath Ramesh <bramesh@vt.edu> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds2009-01-15
|\ | | | | | | | | | | | | | | | | | | | | * 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (abituguru3) Fix CONFIG_DMI=n fallback to probe hwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAX hwmon: (abituguru3) Match partial DMI board name strings hwmon: Add a driver for the ADT7475 hardware monitoring chip hwmon: (k8temp) Fix temperature reporting for (most) K8 RevG CPUs hwmon: (k8temp) Fix wrong sensor selection for AMD K8 RevF/RevG CPUs hwmon: (k8temp) Warn about fam F rev F errata
| * hwmon: (abituguru3) Fix CONFIG_DMI=n fallback to probeAlistair John Strachan2009-01-15
| | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_DMI is not enabled, dmi detection should flag that no board could be detected (err=1) rather than another error condition (err<0). This fixes the fallback to manual probing for all motherboards, even those without DMI strings, when CONFIG_DMI=n. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAXAlistair John Strachan2009-01-15
| | | | | | | | | | | | | | | | | | | | Switch the IN9 32X MAX over from port probing to the preferred DMI probe method. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: Paul Hartman <paul.hartman+gentoo@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-11 19:27:59 -0500