aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
Commit message (Collapse)AuthorAge
* hwmon: (adm1026) Prevent log spammingJean Delvare2008-10-17
| | | | | | | | | When debugging is enabled, the adm1026 driver currently logs the message "Setting VID from GPIO11-15" 108 times each time you run "sensors". Once should be enough. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Philip Pokorny <ppokorny@penguincomputing.com>
* hwmon: (adm1026) Fix debug messagesJean Delvare2008-10-17
| | | | | | | | * Add missing new-line to one debug message. * Remove leading colon from 3 debug messages. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Philip Pokorny <ppokorny@penguincomputing.com>
* hwmon: (adm1029) Use mask for fan_div valueCorentin Labbe2008-10-17
| | | | | | | | This is my patch for testing correct values of fan div in adm1029 and prevent a division by 0 for some (unlikely) register values. Signed-off-by: Corentin Labbe <corentin.labbe@geomatys.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (ibmaem) Automatically load on IBM systems via DMIDarrick J. Wong2008-10-17
| | | | | Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (ibmpex) Automatically load on IBM systems via DMIDarrick J. Wong2008-10-17
| | | | | Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (w83781d) Use new style driver bindingWolfgang Grandegger2008-10-17
| | | | | | | | | | | | This patch modifies the w83781d driver to use new style driver binding. Substantial code modifications are required to deal with the new interface, especially legacy device detection. [JD: largely edited to make the patch smaller and to get the driver to work again on ISA devices.] Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (w83781d) Stop abusing struct i2c_client for ISA devicesJean Delvare2008-10-17
| | | | | | | | | Upcoming changes to the I2C part of the w83781d driver will cause ISA devices to no longer have a struct i2c_client at hand. So, we must stop (ab)using it now. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Wolfgang Grandegger <wg@grandegger.com>
* hwmon: (w83781d) Make ISA interface depend on CONFIG_ISAWolfgang Grandegger2008-10-17
| | | | | | | | | | | Probing the ISA bus on systems without ISA bus may hang the system. This patch makes the ISA bus related code depend on the kernel configuration parameter CONFIG_ISA. It moves ISA bus related code into one #ifdef CONFIG_ISA ... #endif block and adds some helper function. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (w83781d) Detect alias chipsJean Delvare2008-10-17
| | | | | | | | | | | | | | | | | The W83781D and W83782D can be accessed either on the I2C bus or the ISA bus. We must not access the same chip through both interfaces. So far we were relying on the user passing the correct ignore parameter to skip the registration of the I2C interface as suggested by sensors-detect, but this is fragile: the user may load the w83781d driver without running sensors-detect, and the i2c bus numbers are not stable across reboots and hardware changes. So, better detect alias chips in the driver directly, and skip any I2C chip which is obviously an alias of the ISA chip. This is done by comparing the value of 26 selected registers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Wolfgang Grandegger <wg@grandegger.com>
* hwmon: (w83781d) Refactor beep enable handlingJean Delvare2008-10-17
| | | | | | | | We can handle the beep enable bit as any other beep mask bit for slightly smaller code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Wolfgang Grandegger <wg@grandegger.com>
* hwmon: (w83791d) add support for thermal cruise modeMarc Hulsman2008-10-17
| | | | | | | | | Add support to set target temperature and tolerance for thermal cruise mode. Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (w83791d) add pwm_enable supportMarc Hulsman2008-10-17
| | | | | | | | Add support for pwm_enable. Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (w83791d) add manual PWM supportMarc Hulsman2008-10-17
| | | | | | | | Add PWM manual control. Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (w83791d) fan 4/5 pins can also be used for gpioMarc Hulsman2008-10-17
| | | | | | | | | Pins fan/pwm 4-5 can be in use as GPIO. If that is the case, do not create their sysfs-interface. Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (max1619) Use inline functions instead of macrosAndrew Morton2008-10-17
| | | | | | Macros evaluating their arguments more than once are evil. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (it87) Fix thermal sensor type valuesJean Delvare2008-10-17
| | | | | | | | | | | | | | | The it87 driver doesn't follow the standard sensor type values as documented in Documentation/hwmon/sysfs-interface. It uses value 2 for thermistors instead of value 4. This causes "sensors" to tell the user that the chip is setup for a transistor while it is actually setup for a thermistor. Using value 4 for thermistors solves the problem. For compatibility reasons, we still accept value 2 but emit a warning message so that users update their configuration files. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com>
* hwmon: (lm78) Convert to a new-style i2c driverJean Delvare2008-10-17
| | | | | | | The new-style lm78 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm78) Stop abusing struct i2c_client for ISA devicesJean Delvare2008-10-17
| | | | | | | | Upcoming changes to the I2C part of the lm78 driver will cause ISA devices to no longer have a struct i2c_client at hand. So, we must stop (ab)using it now. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm78) Prevent misdetection of Winbond chipsJean Delvare2008-10-17
| | | | | | | | | The LM78 detection is relatively weak, and sometimes recent Winbond chips can be misdetected as an LM78. We have had repeated reports of this happening. We have an explicit check against this for the ISA access, do the same for I2C access now. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm78) Detect alias chipsJean Delvare2008-10-17
| | | | | | | | | | | | | | | | The LM78 and LM79 can be accessed either on the I2C bus or the ISA bus. We must not access the same chip through both interfaces. So far we were relying on the user passing the correct ignore parameter to skip the registration of the I2C interface as suggested by sensors-detect, but this is fragile: the user may load the lm78 driver without running sensors-detect, and the i2c bus numbers are not stable across reboots and hardware changes. So, better detect alias chips in the driver directly, and skip any I2C chip which is obviously an alias of the ISA chip. This is done by comparing the value of 26 selected registers. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm78) Fix I/O resource conflict with PNPJean Delvare2008-10-17
| | | | | | | | | | | | | | | Only request I/O ports 0x295-0x296 instead of the full I/O address range. This solves a conflict with PNP resources on a few motherboards. Also request the I/O ports in two parts (4 low ports, 4 high ports) during device detection, otherwise the PNP resource make the request (and thus the detection) fail. This is the exact same fix that was applied to driver w83781d in March 2008 to address the same problem: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2961cb22ef02850d90e7a12c28a14d74e327df8d Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm85) Better label namesJean Delvare2008-10-17
| | | | | | | | Label names ERROR1 and ERROR3 aren't exactly explicit. Change them for better names that indicate what we are up to. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at>
* hwmon: (lm85) Simplify RANGE_TO_REGJean Delvare2008-10-17
| | | | | | | | | | Function RANGE_TO_REG can easily be simplified. Credits go to Herbert Poetzl for indirectly suggesting this to me. I tested that the new implementation returns the same result as the original implementation for all input values. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at>
* hwmon: (lm85) Convert to a new-style i2c driverJean Delvare2008-10-17
| | | | | | | | The new-style lm85 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at>
* hwmon: (lm85) Support different PWM frequency tablesJean Delvare2008-10-17
| | | | | | | | | The Analog Devices and SMSC devices supported by the lm85 driver do not have the same PWM frequency table as the National Semiconductor devices. Add support for per-device frequency tables. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at>
* hwmon: (lm85) Select the closest PWM frequencyJean Delvare2008-10-17
| | | | | | | | | The LM85 and compatible chips only support 8 arbitrary PWM frequencies. The algorithm to pick one of them based on the user input is not optimum. Improve it to always pick the closest supported frequency. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at>
* hwmon: (lm85) Implement the standard PWM frequency interfaceJean Delvare2008-10-17
| | | | | | | | | | | Implement the standard PWM frequency interface: pwm[1-*]_freq in units of 1 Hz, instead of the non-standard pwm[1-*]_auto_pwm_freq in units of 0.1 Hz. The old naming was not only non-standard, it was also confusing, because it suggested that the frequency value only applied in automatic fan speed mode, which isn't true. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at>
* hwmon: (lm85) Rework the device detectionJean Delvare2008-10-17
| | | | | | | | Rework the device detection to make it clearer and faster in the general case (when a known device is found.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at>
* hwmon: (ams) Simplify IRQ handling routineDmitry Torokhov2008-10-17
| | | | | | | | | Simplify the IRQ handling routine of ams driver. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (ams) Fix locking issuesDmitry Torokhov2008-10-17
| | | | | | | | | | Use a separate mutex to serialize input device creation/removal, otheriwse we deadlock if we try to remove input device while it is being polled. Also do not take ams_info.lock when it is not needed. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (ams) Fix permissions on 'joystick' module parameterDmitry Torokhov2008-10-17
| | | | | | | | | | | We should not allow writes to the 'joystick' module parameters since writing there will not trigger creation of the input device. Disable writes since we provide alternative way of enabling input device via AMS device's sysfs attribute. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (ams) Convert to a new-style i2c driverJean Delvare2008-10-17
| | | | | | | | | | | | | | | | | | | | | | The legacy i2c binding model is phasing out, so the ams driver needs to be converted to a new-style i2c driver. Here is a naive approach of this conversion. Basically it is moving the i2c device creation from the ams driver to the i2c-powermac driver. This should work, but I suspect we could come up with something cleaner by declaring the i2c device as part of the platform setup. This could be done later by someone more familiar with openfirmware-based platforms than I am myself. One nice thing brought by this conversion is that the ams driver should be loaded automatically on systems where is is needed (at least when the I2C interface to the chip is used) providing coldplug-aware user-space environment. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Cc: Stelian Pop <stelian@popies.net> Cc: Michael Hanselmann <linux-kernel@hansmi.ch> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* hwmon: (lm87) Add support for configuration through platform_dataBen Hutchings2008-10-17
| | | | | | | | | | The lm87 driver normally assumes that firmware configured the chip correctly. Since this is not always the case, alllow platform code to set the channel register value via platform_data. All other configuration registers can be changed after driver initialisation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm87) Restore original configuration register on removalBen Hutchings2008-10-17
| | | | | | | | This means that if we have to start the monitor when probed, we also stop it on removal. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm87) Fix masking of config register in lm87_init_client()Ben Hutchings2008-10-17
| | | | | | | | | | | | lm87_init_client() conditionally sets the Start bit and clears the INT#_Clear bit in the Config 1 register. The condition should be that either of these bits needs changing, but currently it checks the (self-clearing) Initialization bit instead of INT#_Clear. Fix the condition and also ensure we never set the Initialization bit. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Don't spam the kernel logJean Delvare2008-10-17
| | | | | | | | | Degrade the "Unsupported chip" message from info to debug level. There's nothing wrong with this, so no need to bother the user. Also make the message slightly more descriptive. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
* hwmon: (lm90) Support MAX6646, MAX6647 and MAX6649Ben Hutchings2008-10-17
| | | | | | | | These Maxim chips are similar to MAX6657 but use unsigned temperature values to allow for readings up to 145 degrees. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Rename temperature conversion functions to match usageBen Hutchings2008-10-17
| | | | | | | | | | The encoding of temperatures varies between chips and modes. So do not use "temp1" or "temp2" in the names of the conversion functions, but specify the encoding. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Martyn Welch <martyn.welch@gefanuc.com>
* hwmon: (lm90) Support ADT7461 in extended modeNate Case2008-10-17
| | | | | | | | | | Support ADT7461 in extended temperature range mode, which will change the range of readings from 0..127 to -64..191 degC. Adjust the register conversion functions accordingly. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Martyn Welch <martyn.welch@gefanuc.com>
* hwmon: (lm90) Convert some macros to static functionsNate Case2008-10-17
| | | | | | | | | | | Use static functions instead of the TEMPx_FROM_REG* and TEMPx_TO_REG* macros. This will ensure type safety and eliminate any side effects from arguments passed in since the macros referenced 'val' multiple times. This change should not affect functionality. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Martyn Welch <martyn.welch@gefanuc.com>
* hwmon: (lm90) Update datasheet linksJean Delvare2008-10-17
| | | | | | | | | Update the links to the datasheet of some of the devices supported by the lm90 driver. Also remove the links from the driver itself, so that we don't have to update them twice each time they change. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
* hwmon: (lm90) Don't access nonexistent registers on Maxim chipsJean Delvare2008-10-17
| | | | | | | | | | The Maxim chips supported by the lm90 driver have 8-bit high and low remote limit values, not 11-bit as the other chips have. So stop reading from and writing to registers that do not exist on these chips. Also round the limit values set by the user properly. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
* hwmon: (lm90) Support the extra resolution bits of MAX6657Jean Delvare2008-10-17
| | | | | | | | | The Maxim MAX6657, MAX6658 and MAX6659 have extra resolution bits for the local temperature measurement. Let the lm90 driver read them and export them to user-space. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
* hwmon: (lm90) Move 16-bit value read to a separate functionJean Delvare2008-10-17
| | | | | | | | | Move the code which aggregates two 8-bit register values into a 16-bit value to a separate function. We'll need to do it a second time soon and I don't want to duplicate the code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
* device create: misc: convert device_create_drvdata to device_createGreg Kroah-Hartman2008-10-16
| | | | | | | | Now that device_create() has been audited, rename things back to the original call to be sane. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'next' of ↵Linus Torvalds2008-10-15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (158 commits) powerpc: Fix CHRP PCI config access for indirect_pci powerpc/chrp: Fix detection of Python PCI host bridge on IBM CHRPs powerpc: Fix 32-bit SMP boot on CHRP powerpc: Fix link errors on 32-bit machines using legacy DMA powerpc/pci: Improve detection of unassigned bridge resources hvc_console: Fix free_irq in spinlocked section powerpc: Get USE_STRICT_MM_TYPECHECKS working again powerpc: Reflect the used arguments in machine_init() prototype powerpc: Fix DMA offset for non-coherent DMA powerpc: fix fsl_upm nand driver modular build powerpc/83xx: add NAND support for the MPC8360E-RDK boards powerpc: FPGA support for GE Fanuc SBC610 i2c: MPC8349E-mITX Power Management and GPIO expander driver powerpc: reserve two DMA channels for audio in MPC8610 HPCD device tree powerpc: document the "fsl,ssi-dma-channel" compatible property powerpc: disable CHRP and PMAC support in various defconfigs OF: add fsl,mcu-mpc8349emitx to the exception list powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boards powerpc: remove support for bootmem-allocated memory for the DIU driver powerpc: remove non-dependent load fsl_booke PTE_64BIT ...
| * Merge commit 'origin'Benjamin Herrenschmidt2008-10-14
| |\ | | | | | | | | | | | | | | | Manual fixup of conflicts on: arch/powerpc/include/asm/dcr-regs.h drivers/net/ibm_newemac/core.h
| * | powerpc/drivers: Use linux/of_device.h instead of asm/of_device.hStephen Rothwell2008-08-20
| | | | | | | | | | | | | | | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | | hwmon: (dme1737) Convert to a new-style i2c driverJean Delvare2008-10-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new-style dme1737 driver implements the optional detect() callback to cover the use cases of the legacy driver. I don't actually expect any new-style device for that driver, but as the old i2c API is going away soon, we have to switch to the new one. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Juerg Haefliger <juergh@gmail.com>
* | | hwmon: (dme1737) Be less i2c-centricJean Delvare2008-10-14
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | The dme1737 driver support both LPC (ISA) and SMBus devices. At the moment it's rather i2c-centric, and LPC variants use a fake i2c_client for some operations. In a near future, i2c_client will be allocated by i2c-core rather than by the device drivers, so non-i2c drivers will not have one. As a preparation step, change the driver code to no longer assume that an i2c_client structure is always available. No functional change. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Juerg Haefliger <juergh@gmail.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-29 14:02:27 -0500