aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
Commit message (Collapse)AuthorAge
* i2c: Convert most new-style drivers to use module aliasingJean Delvare2008-04-29
| | | | | | | | | | | | | | Based on earlier work by Jon Smirl and Jochen Friedrich. Update most new-style i2c drivers to use standard module aliasing instead of the old driver_name/type driver matching scheme. I've left the video drivers apart (except for SoC camera drivers) as they're a bit more diffcult to deal with, they'll have their own patch later. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jon Smirl <jonsmirl@gmail.com> Cc: Jochen Friedrich <jochen@scram.de>
* i2c: Add support for device alias namesJean Delvare2008-04-29
| | | | | | | | | | | | | | Based on earlier work by Jon Smirl and Jochen Friedrich. This patch allows new-style i2c chip drivers to have alias names using the official kernel aliasing system and MODULE_DEVICE_TABLE(). At this point, the old i2c driver binding scheme (driver_name/type) is still supported. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jochen Friedrich <jochen@scram.de> Cc: Jon Smirl <jonsmirl@gmail.com> Cc: Kay Sievers <kay.sievers@vrfy.org>
* hwmon: (w83781d) Fix I/O resource conflict with PNPJean Delvare2008-03-27
| | | | | | | | | | | | | | | Only request I/O ports 0x295-0x296 instead of the full I/O address range. This solves a conflict with PNP resources on a few motherboards. Also request the I/O ports in two parts (4 low ports, 4 high ports) during device detection, otherwise the PNP resource makes the request (and thus the detection) fail. This fixes lm-sensors ticket #2306: http://www.lm-sensors.org/ticket/2306 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* ibmpex: report temperatures in mC, not CDarrick J. Wong2008-03-19
| | | | | | | | | | | ibmpex's temperature sensors report incorrect units. Apply a conversion factor so that tempertures report correctly. Until now, no systems seemed to report temperatures this way, but evidently QS2x blades do. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ibmpex: update Kconfig to list more supported modelsDarrick J. Wong2008-03-19
| | | | | | | | | Enhanced the list of supported machines. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ibmpex: correct power use multipliers for QS2x bladeDarrick J. Wong2008-03-19
| | | | | | | | | | The QS2x blades ships with v2.54 of the firmware, which use the same multiplier for all power meters. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon: normal_i2c arrays should be constMark M. Hoffman2008-02-18
| | | | Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: New driver for Analog Devices ADT7473 sensor chipDarrick J. Wong2008-02-18
| | | | | | | | This driver reports voltage, temperature and fan sensor readings on an ADT7473 chip. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (coretemp) Add Penryn CPU to coretempRudolf Marek2008-02-17
| | | | | | | | | | | This patch adds support for family 0x17, which has Penryn Core. It should also cover the 8 cores Xeons. Can someone test please? I think it should work. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (coretemp) Add TjMax detection for mobile CPUsRudolf Marek2008-02-17
| | | | | | | | | | | | Following patch will finally solve the detection of Intel Mobile CPUs which share same CPUID with Desktop/Server CPUs. We need this information to test some bit so we know if TjMax is 100C or 85C. Intel claims this works for mobiles only, respect that and set for desktops the TjMax to 100C. Intel provided some table on their wiki based on my chat with them at: http://softwarecommunity.intel.com/isn/Community/en-US/forums/30247249/ShowThread.aspx#30247249 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (applesmc) sensors set for MacBook2Riki Oktarianto2008-02-17
| | | | | | | | | | | | | | On my mid-2007 MacBook2, reading Ts0P sensor always failed with this message: applesmc: wait status failed: 5 != 50. So I assume that there's no such Ts0p sensor in this model (please confirm, anyone). If there's the case, then we need a new set of sensors defined for MacBook2. Signed-off-by: Riki Oktarianto <rkoktarianto@gmail.com> Cc: Nicolas Boichat <nicolas@boichat.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (thmc50) Storage class should be before const qualifierTobias Klauser2008-02-17
| | | | | | | | | | | The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (coretemp) fix section mismatch warningSam Ravnborg2008-02-17
| | | | | | | | | | | | | | | Fix following warning: WARNING: vmlinux.o(.text+0xebfd04): Section mismatch in reference from the function coretemp_cpu_callback() to the function .cpuinit.text:coretemp_device_add() coretemp_cpu_callback() are only used inside a HOTPLUG_CPU block so annotate it __cpuinit. The notifier referencing the function are annotated __refdata to silence warning from the exit function. The unregister function do not use the embedded pointer but clears the variable so the annotation is OK. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (coretemp) Add maximum cooling temperature readoutRudolf Marek2008-02-17
| | | | | | | | | Following patch will add reporting of maximum temperature, at which all fans should spin full speed. It may be non-physical temperature on Desktop/Server CPUs. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (adm1026) Properly terminate sysfs groupsJean Delvare2008-02-17
| | | | | | | | The missing NULL at the end of two sysfs file groups causes a kernel crash when calling sysfs_create_group(). Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (vt8231) Update maintainer email addressRoger Lucas2008-02-17
| | | | | | | | Signed-off-by: Roger Lucas <vt8231@hiddenengine.co.uk> (modified MAINTAINERS entry also - MMH) Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (vt8231) Add individual alarm filesJean Delvare2008-02-17
| | | | | | | | | The new libsensors needs these individual alarm files. Signed-off-by: Jean Delvare <khali@linux-fr.org> CC: Roger Lucas <vt8231@hiddenengine.co.uk> Acked-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (via686a) Add individual alarm filesJean Delvare2008-02-17
| | | | | | | | The new libsensors needs these individual alarm files. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (smsc47m1) Add individual alarm filesJean Delvare2008-02-17
| | | | | | | | The new libsensors needs these individual alarm files. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (max1619) Add individual alarm and fault filesJean Delvare2008-02-17
| | | | | | | | The new libsensors needs these individual alarm and fault files. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (lm92) Add individual alarm filesJean Delvare2008-02-17
| | | | | | | | The new libsensors needs these individual alarm files. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (lm80) Add individual alarm filesJean Delvare2008-02-07
| | | | | | | The new libsensors needs these individual alarm files. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (lm80) De-macro the sysfs callbacksJean Delvare2008-02-07
| | | | | | | | | | | | | Use standard dynamic sysfs callbacks instead of macro-generated functions. This makes the code more readable, and the binary smaller (by about 34%). As a side note, another benefit of this type of cleanup is that they shrink the build time. For example, this cleanup saves about 29% of the lm80 driver build time. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (lm80) Various cleanupsJean Delvare2008-02-07
| | | | | | | | | | | * Drop trailing whitespace * Fold a long line * Rename new_client to client * Drop redundant initializations to 0 * Drop bogus comment Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627hf) Refactor beep enable handlingJean Delvare2008-02-07
| | | | | | | | We can handle the beep enable bit as any other beep mask bit for slightly smaller code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627hf) Add individual alarm and beep filesJean Delvare2008-02-07
| | | | | | | | | | The new libsensors needs these individual alarm and beep files. The code was copied from the w83781d driver. I've tested the alarm files on a W83627THF. I couldn't test the beep files as the system in question doesn't have a speaker. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627hf) Enable VBAT monitoringJean Delvare2008-02-07
| | | | | | | | | | | If VBAT monitoring is disabled, enable it. Bug reported on the lm-sensors trac system: http://lm-sensors.org/ticket/2282 This is the exact same patch that was applied to the w83627ehf driver 6 months ago. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627ehf) The W83627DHG has 8 VID pinsJean Delvare2008-02-07
| | | | | | | | While the W83627EHF/EHG has only 6 VID pins, the W83627DHG has 8 VID pins, to support VRD 11.0. Add support for this. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (asb100) Add individual alarm filesJean Delvare2008-02-07
| | | | | | | | | | | The new libsensors needs these individual alarm files. I did not create alarm files for in5 and in6 as these alarms are documented as not working. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (asb100) De-macro the sysfs callbacksJean Delvare2008-02-07
| | | | | | | | | | Use standard dynamic sysfs callbacks instead of macro-generated wrappers. This makes the code more readable, and the binary smaller (by about 12%). Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (asb100) Various cleanupsJean Delvare2008-02-07
| | | | | | | | | | | | | | * Drop history, it's incomplete and doesn't belong there * Drop unused version number * Drop trailing spaces * Coding style fixes * Fold long lines * Rename new_client to client * Drop redundant initializations to 0 Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: VRM is not written to registersJean Delvare2008-02-07
| | | | | | | | | | | | What was true of reading the VRM value is also true of writing it: not being a register value, it doesn't need hardware access, so we don't need a reference to the i2c client. This allows for a minor code cleanup. As gcc appears to be smart enough to simplify the generated code by itself, this cleanup only affects the source code, the generated binaries are unchanged. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (dme1737) fix Super-IO device ID overrideJuerg Haefliger2008-02-07
| | | | | | | | | | | The dme1737 has a second place where the Super-IO device ID is checked. This has been missed by Jean's initial patch that adds support for user-controlled Super-IO device ID override. This patch fixes this issue. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (dme1737) fix divide-by-0Juerg Haefliger2008-02-07
| | | | | | | | | This patch fixes a possible divide-by-0 and a minor bug in the FAN_FROM_REG macro (in TPC mode). Signed-off-by: Juerg Haefliger <juergh at gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (abituguru3) Add AUX4 fan input for Abit IP35 ProSergey Vlasov2008-02-07
| | | | | | | | | Abit IP35 Pro has 6 fan connectors (CPU, SYS and AUX1-4), but the entry for AUX4 was missing from the table. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Add support for Texas Instruments/Burr-Brown ADS7828Steve Hardy2008-02-07
| | | | | | Signed-off-by: Steve Hardy <steve@linuxrealtime.co.uk> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (adm9240) Add individual alarm filesJean Delvare2008-02-07
| | | | | | | | The new libsensors needs these individual alarm files. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Grant Coady <gcoady.lk@gmail.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (lm77) Add individual alarm filesJean Delvare2008-02-07
| | | | | | | | | The new libsensors needs this. As the old library never had support for the lm77 driver, I even dropped the legacy "alarms" file. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Discard useless I2C driver IDsJean Delvare2008-02-07
| | | | | | | | | Many I2C hwmon drivers define a driver ID but no other code references these, meaning that they are useless. Discard them, along with a few IDs which are defined but never used at all. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (lm85) Make the pwmN_enable files writableJean Delvare2008-02-07
| | | | | | | | | | | | | Make the pwmN_enable files writable. This makes it possible to use standard fan speed control tools (pwmconfig, fancontrol) with the lm85 driver. I left the non-standard pwmN_auto_channels files in place, as they give additional control for the automatic mode, and some users might be used to them by now. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (lm85) Return standard values in pwmN_enableJean Delvare2008-02-07
| | | | | | | | The values returned by the lm85 driver in pwmN_enable sysfs files do not match the standard. Fix that. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (adm1031) Add individual alarm and fault filesJean Delvare2008-02-07
| | | | | | | The new libsensors needs these. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (adm1031) Get rid of macro-generated wrappersJean Delvare2008-02-07
| | | | | | | | | Use the standard dynamic sysfs callbacks instead of macro-generated wrappers. It makes the code more simple and the binary smaller (-8% on my system.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (adm1031) Various cleanupsJean Delvare2008-02-07
| | | | | | | | | | | | | * Rename new_client to client * Drop redundant initializations to 0 * Drop trailing space * Other whitespace cleanups * Split/fold a few long lines * Constify static data * Optimizations in set_fan_div() Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (adm1031) Fix register overwrite in set_fan_div()Jean Delvare2008-02-07
| | | | | | | | | | | | | | Don't rely on the register cache when setting a new fan clock divider. For one thing, the cache might not have been initialized at all if the driver has just been loaded. For another, the cached values may be old and you never know what can happen in the driver's back. Also invalidate the cache instead of trying to adjust the measured fan speed: the whole point of changing the clock divider is to get a better reading. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (it87) Delete pwmN_freq files on driver removalJean Delvare2008-02-07
| | | | | | | | | In commit f8d0c19a93cea3a26a90f2462295e1e01a4cd250 I forgot to delete the pwmN_freq files on driver removal, here's the fix. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Riku Voipio <riku.voipio@movial.fi> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83781d) Misc cleanupsJean Delvare2008-02-07
| | | | | | | | | * Drop unused defines * Drop unused driver ID * Remove trailing whitespace Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83781d) Drop W83627HF supportJean Delvare2008-02-07
| | | | | | | | | | The W83627HF hardware monitoring features are supported by the w83627hf driver for several years now. Support by the w83781d has been advertised as deprecated 6 months ago, it's about time to see it go. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (adm1026) Don't create files for missing inputsJean Delvare2008-02-07
| | | | | | | | | On the ADM1026, pins 27 and 28 can be used for two different functions: either temp3, or in8+in9. We should only create the sysfs files for the function that is configured, otherwise it is confusing for the user. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (adm1026) More cleanups (updated)Jean Delvare2008-02-07
| | | | | | | | | | | | | | Various cleanups: * Drop an unused define. * Drop unused struct member "type". * Drop one useless instruction. * Drop redundant initializations to 0. * Rename new_client to client. * Drop a useless cast. * Minor code cleanup. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-26 07:29:11 -0500