aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
Commit message (Collapse)AuthorAge
* [PATCH] hwmon: kzalloc conversionDeepak Saxena2005-10-28
| | | | | | | | | Use kzalloc instead of kmalloc+memset in all hardware monitoring drivers. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Missing class check in two hwmon driversJean Delvare2005-10-28
| | | | | | | | The atxp1 and ds1621 drivers should make sure they do not probe non-hwmon i2c adapters. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: New device ID for the smsc47b397 driverMark M. Hoffman2005-10-28
| | | | | | | | | | | This patch adds a new ID to the SMSC LPC47B397-NC hardware monitoring driver - for a chip that is claimed to be 100% compatible otherwise. Signed-off-by: Bryan Young (Utilitek Systems, Inc.) Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Drop useless w83627hf initialization stepJean Delvare2005-10-28
| | | | | | | | | | | Drop a useless initialization step in the w83627hf driver. The comment says that the W83627HF PWM2 can be disabled, but it can't. I suppose this is a leftover from the w83781d driver (from which the w83627hf driver is derived), as for example the W83782D had the ability to disable PWM2. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Drop legacy ISA address support from it87Jean Delvare2005-10-28
| | | | | | | | | | | | | Drop legacy ISA address support from the it87 driver. All supported chips are Super-I/O chips, so the device ISA address can be safely read from Super-I/O space rather than blindly assumed. Two nearby inaccurate documentation statements have been fixed as well: * The IT8705F doesn't have an SMBus interface. * The SiS950 doesn't have a distinct prefix. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Fix w83627ehf/hf vs PNPACPI conflict (bug #4014)Petr Vandrovec2005-10-28
| | | | | | | | | | | | | | | | | | | | | | | | This patch changes w83627hf and w83627ehf drivers to reserve only ports 0x295-0x296, instead of full 0x290-0x297 range. While some other sensors chips respond to all addresses in 0x290-0x297 range, Winbond chips respond to 0x295-0x296 only (this behavior is implied by documentation, and matches behavior observed on real systems). This is not problem alone, as no BIOS was found to put something at these unused addresses, and sensors chip itself provides nothing there as well. But in addition to only respond to these two addresses, also BIOS vendors report in their ACPI-PnP structures that there is some resource at I/O address 0x295 of length 2. And when later this hwmon driver attempts to request region with base 0x290/length 8, it fails as one request_region cannot span more than one device. Due to this we have to ask only for region this hardware really occupies, otherwise driver cannot be loaded on systems with ACPI-PnP enabled. Signed-off-by: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Minor w83l785ts optimizationJean Delvare2005-10-28
| | | | | | | | | | | | Using s8 instead of u8 to store temperature register values saves a few instructions on sysfs file read. The very same was done for several other drivers a while ago (lm63, lm83, lm90...) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/hwmon/w83l785ts.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
* [PATCH] hwmon: w83l785ts converted to dynamic sysfs callbacksJean Delvare2005-10-28
| | | | | | | | | | | Convert the w83l785ts driver to use dynamic sysfs callbacks. This is a small driver so the benefit is thin, but still worth it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/hwmon/w83l785ts.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-)
* [PATCH] hwmon: Discard bogus comment about init setting limitsJean Delvare2005-10-28
| | | | | | | | | | | | | | | | Discard a common out-of-date comment in 5 hardware monitoring drivers. The hardware monitoring chip drivers are no more setting sensor limits at initialization time, for quite some time already. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/hwmon/lm78.c | 1 - drivers/hwmon/via686a.c | 1 - drivers/hwmon/w83627hf.c | 1 - drivers/hwmon/w83781d.c | 1 - drivers/hwmon/w83792d.c | 1 - 5 files changed, 5 deletions(-)
* [PATCH] hwmon: Discard explicit static initializations to 0Jean Delvare2005-10-28
| | | | | | | | | | | Kill explicit static initializations to 0 in 2 hwmon drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/hwmon/adm1021.c | 2 +- drivers/hwmon/via686a.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
* [PATCH] hwmon: Do not forcibly enable via686a by defaultJean Delvare2005-10-28
| | | | | | | | | | | | | | | | | | | | | Do not enable the VIA VT82C686A/B integrated sensors by default, as disabled sensors usually means that this feature is not used so the values won't make any sense. This has been confusing many users in the past: http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1786 http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1811 http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=2052 It is still possible to forcibly enable the sensors by using the force_addr module parameter. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Documentation/hwmon/via686a | 17 +++++++++++++++-- drivers/hwmon/via686a.c | 18 +++++++++++------- 2 files changed, 26 insertions(+), 9 deletions(-)
* [PATCH] hwmon: adm9240 whitespace cleanupsJean Delvare2005-10-28
| | | | | | | | | | | | This whitespace cleanup patch removes one trailing space and breaks lines longer than 80 characters. Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/hwmon/adm9240.c | 33 +++++++++++++++++++++------------ 1 file changed, 21 insertions(+), 12 deletions(-)
* [PATCH] hwmon: via686a: save 0.5k by long v[256] -> s16 v[256]Jean Delvare2005-10-28
| | | | | | | | We can save 0.5kB of data in the via686a driver. From: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: adm9240 driver update - dynamic sysfsGrant Coady2005-10-28
| | | | | | | | | | | | | hwmon: adm9240 update 2/2: convert to use dynamic sysfs accessors This patch converts adm9240 to use Yani Ioannou's dynamic sysfs callbacks, reducing driver memory footprint from 16312 to 14104 bytes on 2.6.14-rc1, removing the old driver macro mess. Run tested on Intel SE440BX-2 mobo. Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: adm9240 driver update - cleanupsGrant Coady2005-10-28
| | | | | | | | | | hwmon: adm9240 update 1/2: cleanups: o remove i2c read/write wrapper interface as it does nothing, o change kmalloc + memset to kzalloc Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacksRussell King2005-10-28
| | | | | | | | | | | | | | | | In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] Driver Core: fix up all callers of class_device_create()Greg Kroah-Hartman2005-10-28
| | | | | | | | The previous patch adding the ability to nest struct class_device changed the paramaters to the call class_device_create(). This patch fixes up all in-kernel users of the function. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hdaps: small update.Robert Love2005-09-23
| | | | | | | | | | | | | | - Handle dmi_system_check() elegantly, now that my bugfix is upstream. - Add support for the X41 and R52. - Cleanup some comments do I do not have to keep updating them with each new whitelisted laptop. Signed-off-by: Robert Love <rml@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hdaps driver updateRobert Love2005-09-17
| | | | | | | | | | | | | | | - Remove the relative input device - Add an absolute input device - Misc. cleanup and bug fixing The patch is sizable due to the cleanup from removing the relative input device (net -112 lines). Signed-off-by: Robert Love <rml@novell.com> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hwmon: w83627hf: no reset by defaultJean Delvare2005-09-09
| | | | | | | | | | | | | Make the reset of the chips in w83627hf optional rather than the default. This reset has been causing trouble several times already. It may even go completely away unless it proves to be useful to at least one user. Closes bug #5168: http://bugzilla.kernel.org/show_bug.cgi?id=5168 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Update smsc47m1 head commentJean Delvare2005-09-09
| | | | | | | | Update the head comment of the smsc47m1 driver to mention all the supported devices. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: fix sis5595, via686a force_addr module parameterJean Delvare2005-09-09
| | | | | | | | | | Recent changes to the i2c-isa design broke the force_addr parameter of two hardware monitoring drivers as a side effect: sis5595 and via686a. The last address test was in fact useless beforehand, and the redesign turned it into a bug. I'm sorry about that. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] updated hdaps driver.Robert Love2005-09-09
| | | | | | | | Driver for the IBM Hard Drive Active Protection System (HDAPS), an accelerometer found in most modern ThinkPads. Signed-off-by: Robert Love <rml@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: (3/3) pc87360 driver updateJim Cromie2005-09-05
| | | | | | | | | | | pc87360: consolidate fan helper This patch consolidates the _set_fan_min() helper routine into the 2 line sysfs-callback wrapper that uses it. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: (2/3) pc87360 driver updateJim Cromie2005-09-05
| | | | | | | | | | | | | | | | | | | | | | | | pc87360: number-skew to init The temp, therm, fan, pwm callbacks all have an offset skew in the code which accommodates attribute numbering conventions under /sys/bus/i2c/devices/9191-6620/ (ie they start at 1) This patch moves that skew into the declaration, and out of the functions (except for therm, where we simplify from 2 skews to 1). The declarative skew is clearer, less error-prone, and more efficient. The use of 11+offset-4 below reflects the fact that the sysfs numbering of these units is 4, 5, 6, but they use internal VLM units 11, 12, 13 to measure the thermistor voltages. There's one remaining skew factor, in *_crit callbacks below, because there are no critical thresholds for voltages 0-10, only for those supporting the thermistors. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: (1/3) pc87360 driver updateJim Cromie2005-09-05
| | | | | | | | | | | | | | | | | Use the new "dynamic sysfs callbacks", as introduced recently by Yani Ioannou, in pc87360. Note that this change isn't indiscriminate. Only those attributes that would benefit from having an index (i.e., those which are macro-repeated) have been converted. This significantly shrinks the size of the module: before: 49235 drivers/hwmon/pc87360.ko after: 32532 drivers/hwmon/pc87360.ko Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: VID table updateR.Marek@sh.cvut.cz2005-09-05
| | | | | | | | This patch updates the VID entries, so any future Intel CPU will be detected as unknown rather than 9.0 Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: hwmon vs i2c, second round (11/11)Jean Delvare2005-09-05
| | | | | | | | Use the common vid_from_reg function in lm78 rather than reimplementing it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: hwmon vs i2c, second round (10/11)Jean Delvare2005-09-05
| | | | | | | | | | | | | | I see very little reason why vid_from_reg is inlined. It is not exactly short, its parameters are seldom known in advance, and it is never called in speed critical areas. Uninlining it should cause little performance loss if any, and saves a signficant space as well as compilation time. As suggested by Alexey Dobriyan, I am leaving vid_to_reg inline for now, as it is short and has a single user so far. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: hwmon vs i2c, second round (08/11)Jean Delvare2005-09-05
| | | | | | | | Cleanup hwmon-vid a bit, fixing typos, rewording some comments and reindenting properly at places. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: hwmon vs i2c, second round (07/11)Jean Delvare2005-09-05
| | | | | | | | | | | | | The only part left in i2c-sensor is the VRM/VRD/VID handling code. This is in no way related to i2c, so it doesn't belong there. Move the code to hwmon, where it belongs. Note that not all hardware monitoring drivers do VRM/VRD/VID operations, so less drivers depend on hwmon-vid than there were depending on i2c-sensor. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: hwmon vs i2c, second round (06/11)Jean Delvare2005-09-05
| | | | | | | | | | | The only thing left in i2c-sensor.h are module parameter definition macros. It's only an extension of what i2c.h offers, and this extension is not sensors-specific. As a matter of fact, a few non-sensors drivers use them. So we better merge them in i2c.h, and get rid of i2c-sensor.h altogether. Signed-off-by: Jean Delvare <khali@linux-fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: hwmon vs i2c, second round (04/11)Jean Delvare2005-09-05
| | | | | | | | i2c_probe and i2c_detect now do the exact same thing and operate on the same data structure, so we can have everyone call i2c_probe. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: lm85: trivial cleanupsJean Delvare2005-09-05
| | | | | | | Remove an unused macro and an outdated comment from the lm85 driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: move SENSORS_LIMIT to hwmon.hJean Delvare2005-09-05
| | | | | | | | Move SENSORS_LIMIT from i2c-sensor.h to hwmon.h, as it is in no way related to i2c. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: tag super-i/o find functions __initJean Delvare2005-09-05
| | | | | | | | | | | | | Super-I/O find functions in hardware monitoring drivers can be tagged __init as they are only called from functions themselves tagged __init. Two of them (smsc47b397 and w83627ehf) already do, but the other four of them (it87, pc87360, smsc47m1 and w83627hf) did not. This saves a few bytes of memory after the drivers are loaded, 192 in the case of the it87 driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: refactor message in i2c_detach_clientJean Delvare2005-09-05
| | | | | | | | | | | | We could refactor the error message 34 different i2c drivers print if i2c_detach_client() fails in this function itself. Saves quite a few lines of code. Documentation is updated to reflect that change. Note that this patch should be applied after Rudolf Marek's w83792d patches. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: W83792D add hwmon class register 2/3R.Marek@sh.cvut.cz2005-09-05
| | | | | | | This patch adds registration of hwmon class. Tested with help of i2c-stub. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: W83792D driver 1/3R.Marek@sh.cvut.cz2005-09-05
| | | | | | | | | | | | | | I would like to announce support for W83792D chip. This driver was developed by Winbond Electronics Corp. I added sysfs attributes callbacks infrastructure plus various code fixes and codingstyle cleanups. I would like to thank Winbond for supporting free software. This patch is against 2.6.13rc3 plus hwmon-class and hwmon-split. Separate patch for documantation and hwmon class register will follow. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Chunhao Huang <DZShen@Winbond.com.tw> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: Separate non-i2c hwmon drivers from i2c-core (8/9)Jean Delvare2005-09-05
| | | | | | | | | Kill all uses of i2c_is_isa_adapter except for the hybrid drivers (it87, lm78, w83781d). The i2c-isa adapter not being registered with the i2c core anymore, drivers don't have to fear being erroneously attached to it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: Separate non-i2c hwmon drivers from i2c-core (7/9)Jean Delvare2005-09-05
| | | | | | | | | | | Kill normal_isa in header files, documentation and all chip drivers, as it is no more used. normal_i2c could be renamed to normal, but I decided not to do so at the moment, so as to limit the number of changes. This might be done later as part of the i2c_probe/i2c_detect merge. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: Separate non-i2c hwmon drivers from i2c-core (5/9)Jean Delvare2005-09-05
| | | | | | | | | | | | | | | Call the ISA chip drivers detection function directly instead of relying on i2c_detect. The net effect is that address lists won't be handled anymore, but they were mostly useless in the ISA case anyway (pc87360, smsc47m1, smsc47b397 had already dropped them). We don't need to handle multiple devices, all we may need is a way to force a given address instead of the original one (some drivers already do: sis5595, via686a, w83627hf), and, for drivers supporting multiple chips, a way to force one given kind. All this may be added later on demand, but I actually don't think there will be much demand. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: Separate non-i2c hwmon drivers from i2c-core (4/9)Jean Delvare2005-09-05
| | | | | | | | | | | | | All ISA hardware monitoring drivers (including hybrid drivers) now have a hard dependency on i2c-isa, so they must select I2C_ISA. As a result, CONFIG_I2C_ISA doesn't need to be left visible to the user. The good thing here is that users will stop complaining that some driver doesn't work just because they forgot to compile or load i2c-isa. At this point, all drivers are working again and the cleanup phase can begin. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: Separate non-i2c hwmon drivers from i2c-core (3/9)Jean Delvare2005-09-05
| | | | | | | | | | | | | | Convert the 10 ISA hardware monitoring drivers (it87, lm78, pc87360, sis5595, smsc47b397, smsc47m1, via686a, w83627hf, w83627ehf, w83781d) to explicitely register with i2c-isa. For hybrid drivers (it87, lm78, w83781d), we now have two separate instances of i2c_driver, one for the I2C interface of the chip, and one for ISA interface. In the long run, the one for ISA will be replaced with a different driver type. At this point, all drivers are working again, except for missing dependencies in Kconfig. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C hwmon: add hwmon sysfs class to driversMark M. Hoffman2005-09-05
| | | | | | | | | This patch modifies sensors chip drivers to make use of the new sysfs class "hwmon". Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C hwmon: hwmon sysfs classMark M. Hoffman2005-09-05
| | | | | | | | | | This patch adds the sysfs class "hwmon" for use by hardware monitoring (sensors) chip drivers. It also fixes up the related Kconfig/Makefile bits. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Document on the W83627EHG chipJean Delvare2005-09-05
| | | | | | | Document the fact that the W83627EHG is compatible with the W83627EHF. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: kill client name lm78-jJean Delvare2005-09-05
| | | | | | | | | | | | | | | Drop the separate client name for the LM78-J chip. This is really only a later revision of the LM78, with almost no difference and no difference the driver handles in any case. This was the only client name that had a dash in it, and special care had to be taken in libsensors because of it. As we plan to write a new library soon, I'd like to get rid of this exception before we do. As a nice side effect, it saves 876 bytes in lm78.ko. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: soften lm75 initializationJean Delvare2005-09-05
| | | | | | | | | The LM75 initialization is a bit agressive, it arbitrarily reconfigures the chip. Make it only change the bit it needs. This is a port from the 2.4 kernel version of the driver (lm_sensors). Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C hwmon: kfree fixesMark M. Hoffman2005-08-26
| | | | | | | | | | | | | | This patch fixes several instances of hwmon drivers kfree'ing the "wrong" pointer; the existing code works somewhat by accident. (akpm: plucked from Greg's queue based on lkml discussion. Finishes off the patch from Jon Corbet) Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-14 00:13:43 -0500