aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/Makefile
Commit message (Collapse)AuthorAge
* hwmon: sht15 humidity sensor driverJonathan Cameron2009-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Data sheet at: http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf These sensors communicate over a 2 wire bus running a device specific protocol. The complexity of the driver is mainly due to handling the substantial delays between requesting a reading and the device pulling the data line low to indicate that the data is available. This is handled by an interrupt that is disabled under all other conditions. I wasn't terribly clear on the best way to handle this, so comments on that aspect would be particularly welcome! Interpretation of the temperature depends on knowing the supply voltage. If configured in a board config as a regulator consumer this is obtained from the regulator subsystem. If not it should be provided in the platform data. I've placed this driver in the hwmon subsystem as it is definitely a device that may be used for hardware monitoring and with it's relatively slow response times (up to 120 millisecs to get a reading) a caching strategy certainly seems to make sense! Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds2009-04-07
|\ | | | | | | | | | | * 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: Add Asus ATK0110 support hwmon: (lm95241) Convert to new-style i2c driver
| * hwmon: Add Asus ATK0110 supportLuca Tettamanti2009-04-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Asus boards have an ACPI interface for interacting with the hwmon (fan, temperatures, voltages) subsystem; this driver exposes the relevant information via the standard sysfs interface. There are two different ACPI interfaces: - an old one (based on RVLT/RFAN/RTMP) - a new one (GGRP/GITM) Both may be present but there a few cases (my board, sigh) where the new interface is just an empty stub; the driver defaults to the old one when both are present. The old interface has received a considerable testing, but I'm still awaiting confirmation from my tester that the new one is working as expected (hence the debug code is still enabled). Currently all the attributes are read-only, though a (partial) control should be possible with a bit more work. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | hwmon: add support for GMT G760A fan speed PWM controllerHerbert Valerio Riedel2009-04-07
|/ | | | | | | | | | | | | | | This controller can be found on the D-Link DNS-323 for instance, where it is to be configured via static i2c_board_info in the board-specific mach-orion/dns323-setup.c; this driver supports only the new-style driver model. Tested-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Matthew Palmer <mpalmer@debian.org> Signed-off-by: Laurie Bradshaw <bradshaw.laurie@googlemail.com> Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lis3: SPI transport layerDaniel Mack2009-04-01
| | | | | | | | | | | | Make use of the new abstraction layer and add a new transport layer for spi. Works fine on a PXA based board. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon: Add LTC4215 driverIra Snyder2009-04-01
| | | | | | | | | | | | | | | | | | | | | | | Add Linux support for the Linear Technology LTC4215 Hot Swap controller I2C monitoring interface. I have tested the driver with my board, and it appears to work fine. With the power supplies disabled, it reads 11.93V input, 1.93V output, no current and no power. With the supplies enabled, it reads 11.93V input, 11.98V output, no current, no power. I'm not drawing any current at the moment, so this is reasonable. The value in the sense register never reads anything except 0, so I expect to get zero from the current and power calculations. I didn't attempt to support changing any of the chip's settings or enabling the FET. I'm not sure even how to do that and still fit within the hwmon framework. :) Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Cc: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon: LM95241 driverDavide Rizzo2009-04-01
| | | | | | | | | | | An hwmon driver for the National Semiconductor LM95241 triple temperature sensors chip Signed-off-by: Davide Rizzo <elpa-rizzo@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Move the pcf8591 driver to hwmonJean Delvare2009-03-30
| | | | | | | | | | | | | | Directory drivers/i2c/chips is going away, so drivers there must find new homes. For the pcf8591 driver, the best choice seems to be the hwmon subsystem. While the Philips PCF8591 device isn't a typical hardware monitoring chip, its DAC interface is compatible with the hwmon one, so it fits somewhat. If a better subsystem is ever created for ADC/DAC chips, the driver could be moved there. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
* hwmon: Add a driver for the ADT7475 hardware monitoring chipJordan Crouse2009-01-15
| | | | | | | | Hwmon driver for the ADT7475 chip. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* LIS3LV02D: separate the core from HP ACPI APIEric Piel2009-01-09
| | | | | | | | | | | | | | The sensor can be accessed via various buses. In particular, SPI, I²C and, on HP laptops, via a specific ACPI API (the only one currently supported). Separate this latest platform from the core of the sensor driver to allow support for the other bus type. The second, and more direct goal is actually to be able to merge this part with the hp-disk-leds driver, which has the same ACPI PNP number. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon: Add LTC4245 driverIra Snyder2009-01-07
| | | | | | | | | Add Linux support for the Linear Technology LTC4245 Multiple Supply Hot Swap controller I2C monitoring interface. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* adt7462: new hwmon driverDarrick J. Wong2008-11-12
| | | | | | | | | | | New driver to play with. As Jean mentioned a couple of years ago, this chip is a beast with odd combinations of 8 fans, 4 temperatures, and 13 voltage sensors. This driver has been tested on an IntelliStation Z30. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* LIS3LV02Dx Accelerometer driverPavel Machek2008-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | This adds a driver to the accelerometer sensor found in several HP laptops (under the commercial names of "HP Mobile Data Protection System 3D" and "HP 3D driveguard"). It tries to have more or less the same interfaces as the hdaps and other accelerometer drivers: in sysfs and as a joystick. This driver was first written by Yan Burman. Eric Piel has updated it and slimed it up (including the removal of an interface to access to the free-fall feature of the sensor because it is not reliable enough for now). Pavel Machek removed few more features and switched locking from semaphore to mutex. Several people have contributed to the database of the axes. [eric.piel@tremplin-utc.net: LIS3LV02D: Conform to the new ACPI API] Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Yan Burman <burman.yan@gmail.com> Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'master' of ↵David S. Miller2008-10-11
|\ | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: sound/core/memalloc.c
| * hwmon: add max1111 Low-power Multichannel Serial 8-bit ADCsEric Miao2008-09-23
| | | | | | | | | | | | | | | | | | | | | | | | Driver based on corgi_ssp.c and sharpsl_pm.c, previously done by Richard Purdie and many others. Now changed to generic HWMON device and expose all the ADC input value through sysfs. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | hwmon: Add Ultra45 workstation hwmon driver.David S. Miller2008-08-24
|/ | | | | | | | This is a PIC16F747 based controller that monitors and consolidates the hardware access to various fan and temperature values reported by adr7462 and similar devices behind an I2C bus. Signed-off-by: David S. Miller <davem@davemloft.net>
* hwmon: ADC124S501 generic driverMarc Pignat2008-08-15
| | | | | | | | | | | | | | | | | | | | | | | | SPI driver for analog to digital converters national semiconductor ADC081S101, ADC124S501, ... Code for 8 channels by Tobias Himmer. This driver adds support for National Semiconductor ADC<bb><c>S<sss> chip family, where: * bb is the resolution in number of bits (8, 10, 12) * c is the number of channels (1, 2, 4, 8) * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 kSPS and 101 for 1 MSPS) [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Cc: Tobias Himmer <tobias@himmer-online.de> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon: ad7414 driverSean MacLennan2008-08-06
| | | | | | | Driver for the Analog Devices AD7414 temperature monitoring chip. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* ibmaem: new driver for power/energy/temp meters in IBM System X hardwareDarrick J. Wong2008-05-24
| | | | | | | | | | | | This driver reads IBM Active Energy Manager energy/temperature/power sensors on IBM System X hardware. [akpm@linux-foundation.org: fix printk warnings] Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon: New driver for Analog Devices ADT7473 sensor chipDarrick J. Wong2008-02-18
| | | | | | | | This driver reports voltage, temperature and fan sensor readings on an ADT7473 chip. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Add support for Texas Instruments/Burr-Brown ADS7828Steve Hardy2008-02-07
| | | | | | Signed-off-by: Steve Hardy <steve@linuxrealtime.co.uk> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Add support for Winbond W83L786NG/NRKevin Lo2008-02-07
| | | | | Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (i5k_amb) New memory temperature sensor driverDarrick J. Wong2007-11-08
| | | | | | | | New driver to read FB-DIMM temperature sensors on systems with the Intel 5000 series chipsets. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Add new combined driver for FSC chipsHans de Goede2007-10-11
| | | | | | | | | | This patch adds a new merged driver for FSC sensor chips, it merges the fscher and fscpos drivers and adds support for the FSC Scylla, Heracles and Heimdall chips. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: IBM power meter driverDarrick J. Wong2007-10-09
| | | | | | | Add a driver to export IBM PowerExecutive power meter sensors. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Add f75375s driverRiku Voipio2007-10-09
| | | | | | | Add support for Fintek F75375S/SP and F75373. Signed-off-by: Riku Voipio <riku.voipio@movial.fi> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: add support for adt7470Darrick J. Wong2007-10-09
| | | | | | | | New driver to expose temperature and fan controls attached to Analog Devices ADT7470 hwmon chips. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: add support for Fintek F71882FG and F71883FGHans de Goede2007-10-09
| | | | | | | | | | | | | | | | | | This is the second version of a new driver for the hardware monitoring features of the Fintek F71882FG and F71883FG Super-I/O chips. This version has several small fixes for flaws discovered during the review of the first version. This version of the driver does not support the pwm part of these chips (yet). I'll first design a sysfs api for this and post that for discussion, and then implement pwm support as an incremental patch over this one. This driver supports all sensors of this chip, except for the vid inputs. The vid inputs are somewhat documented in the datasheet, but I know nothing about vid/vrm stuff. Help with this would be much appreciated. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: add support for THMC50 and ADM1022Krzysztof Helt2007-07-30
| | | | | | | | This patch adds support for THMC50 and ADM1022 hardware monitoring chips. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Add LM93 supportHans-Jürgen Koch2007-07-19
| | | | | | | This patch adds support for the LM93 hardware monitoring chip. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Add support for newer uGuru'sHans de Goede2007-07-19
| | | | | | | | | | | This patch adds a new driver for the hardware monitoring features of the third revision of the Abit uGuru chip, found on recent Abit motherboards. This is an entirely different beast then the first and second revision (its again a winbond microcontroller, but the "protocol" to talk to it and the bank addresses are very different. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: New SMSC DME1737 driverJuerg Haefliger2007-07-19
| | | | | | | | | | | | | Add support for the hardware monitoring and fan control capabilities of the SMSC DME1737 and Asus A8000 Super-I/O chips. The hardware monitoring logic of this chip is similar to the LM85 but has some additional features that this driver supports. Even though it's a Super-I/O chip, the hardware monitoring logic can only be accessed via SMBus. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds2007-05-08
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (32 commits) Use menuconfig objects - hwmon hwmon/smsc47b397: Use dynamic sysfs callbacks hwmon/smsc47b397: Convert to a platform driver hwmon/w83781d: Deprecate W83627HF support hwmon/w83781d: Use dynamic sysfs callbacks hwmon/w83781d: Be less i2c_client-centric hwmon/w83781d: Clean up conversion macros hwmon/w83781d: No longer use i2c-isa hwmon/ams: Do not print error on systems without apple motion sensor hwmon/ams: Fix I2C read retry logic hwmon: New AD7416, AD7417 and AD7418 driver hwmon/coretemp: Add documentation hwmon: New coretemp driver i386: Use functions from library in msr driver i386: Add safe variants of rdmsr_on_cpu and wrmsr_on_cpu hwmon/lm75: Use dynamic sysfs callbacks hwmon/lm78: Use dynamic sysfs callbacks hwmon/lm78: Be less i2c_client-centric hwmon/lm78: No longer use i2c-isa hwmon: New max6650 driver ...
| * hwmon: New AD7416, AD7417 and AD7418 driverAlessandro Zummo2007-05-08
| | | | | | | | | | | | | | A driver for the Analog Devices AD7416, AD7417 and AD7418 chips. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: New coretemp driverRudolf Marek2007-05-08
| | | | | | | | | | | | | | | | Add the support for the digital temperature sensor found in recent Intel Core CPUs. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: New max6650 driverHans-Juergen Koch2007-05-08
| | | | | | | | | | | | | | | | This driver supports the Maxim MAX6650 and MAX6651 fan speed monitoring and control chips. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | Apple SMC driver (hardware monitoring and control)Nicolas Boichat2007-05-08
|/ | | | | | | | | | | | | | | | | This driver provides support for the Apple System Management Controller, which provides an accelerometer (Apple Sudden Motion Sensor), light sensors, temperature sensors, keyboard backlight control and fan control. Only Intel-based Apple's computers are supported (MacBook Pro, MacBook, MacMini). [bunk@stusta.de: make drivers/hwmon/applesmc.c:backlight_work stati] [khali@linux-fr.org: fix temperature attribute file names] Signed-off-by: Nicolas Boichat <nicolas@boichat.ch> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon: New driver for the Analog Devices ADM1029Corentin Labbe2007-02-14
| | | | | Signed-off-by: Corentin Labbe <corentin.labbe@geomatys.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: New AMS hardware monitoring driverStelian Pop2006-12-12
| | | | | | | | | | | | | | | | This driver adds support for the Apple Motion Sensor (AMS) as found in 2005 revisions of Apple PowerBooks and iBooks. It implements both the PMU and I2C variants. The I2C driver and mouse emulation is based on code by Stelian Pop, while the PMU driver has been developped by Michael Hanselmann. HD parking support will be added later. Various people contributed fixes to this driver, including Aristeu Sergio Rozanski Filho and Jean Delvare. Signed-off-by: Stelian Pop <stelian@popies.net> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Robert Love <rml@novell.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: New Winbond W83793 hardware monitoring driverRudolf Marek2006-12-12
| | | | | | | | Add support for the W83793 hardware monitoring chip. This driver was originally contributed by Yuan Mu of Winbond Electronics Corp. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: New PC87427 hardware monitoring driverJean Delvare2006-12-12
| | | | | | | | | | | This is a new hardware monitoring driver for the National Semiconductor PC87427 Super-I/O chip. It only supports fan speed monitoring for now, while the chip can do much more. Thanks to Amir Habibi at Candelis for setting up a test system, and to Michael Kress for testing several iterations of this driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: New driver for the VIA VT1211Juerg Haefliger2006-09-28
| | | | | | | | | | | | | | | | | hwmon: New driver for the VIA VT1211 This is a new driver for the VIA VT1211 Super-IO chip. It is a rewrite of the existing vt1211 driver (by Mark D. Studebaker and Lars Ekman) which has been around for a while but never made it into the main kernel tree. It is implemented as a platform driver and therefore requires lm_sensors 2.10.1 to function properly. Signed-off-by: Juerg Haefliger <juergh@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* hwmon: New driver k8tempRudolf Marek2006-09-28
| | | | | | | | | Add support for the temperature sensor(s) found in AMD K8 CPUs. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] lm70: New hardware monitoring driverKaiwan N Billimoria2006-06-22
| | | | | | | | | | | | | | | | | | | | This driver implements support for the National Semiconductor LM70 temperature sensor. The LM70 temperature sensor chip supports a single temperature sensor. It communicates with a host processor (or microcontroller) via an SPI/Microwire Bus interface. Communication with the LM70 is simple: when the temperature is to be sensed, the driver accesses the LM70 using SPI communication: 16 SCLK cycles comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's complement digital temperature (sent via the SIO line), is available in the driver for interpretation. This driver makes use of the kernel's in-core SPI support. Signed-off-by: Kaiwan N Billimoria <kaiwan@designergraphix.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] abituguru: New hardware monitoring driverHans de Goede2006-06-22
| | | | | | | | New hardware monitoring driver for the Abit uGuru Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] HWMON: w83791d: New hardware monitoring driver for the Winbond W83791DCharles Spirakis2006-06-22
| | | | | | | | | | Add support for the w83791d sensor chip. The w83791d hardware is somewhere between the w83781d and the w83792d and this driver code is derived from the code that supports those chips. Signed-off-by: Charles Spirakis <bezaur@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] smsc47m192: New hwmon driver for SMSC LPC47M192/997Hartmut Rick2006-06-22
| | | | | | | | | New driver (smsc47m192) which supports voltage and temperature measurement features of SMSC LPC47M192 and LPC47M997 chips. Signed-off-by: Hartmut Rick <linux@rick.claranet.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: New f71805f driverJean Delvare2006-02-06
| | | | | | | | | | | | | | | This is my f71805f hardware monitoring driver ported from lm_sensors to Linux 2.6. This new driver differs from the other hardware monitoring drivers in that it is implemented as a platform driver. This might not be optimal yet (we would probably need a generic infrastructure and bus type for Super-I/O logical devices) but it is certainly much better than the i2c-isa solution. Note that this driver requires lm_sensors CVS. I hope to get it released as 2.10.0 soon. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: New vt8231 driverRoger Lucas2006-01-06
| | | | | | | | | Port the vt8231 hardware monitoring driver from lm_sensors CVS to Linux 2.6. Signed-off-by: Roger Lucas <roger@planbit.co.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] updated hdaps driver.Robert Love2005-09-09
| | | | | | | | Driver for the IBM Hard Drive Active Protection System (HDAPS), an accelerometer found in most modern ThinkPads. Signed-off-by: Robert Love <rml@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-17 03:04:57 -0500