aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
Commit message (Collapse)AuthorAge
* drm/radeon/kms: fix DP detect and EDID fetch for DP bridgesAlex Deucher2011-09-06
| | | | | | | | Sink type is always DP for DP bridges and EDID fetch on DP bridges is always i2c over aux rather than plain i2c. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: make sure pci max read request size is valid on evergreen+ (v2)Alex Deucher2011-09-02
| | | | | | | | | | | | | | | | If the bios or OS sets the pci max read request size to 0 or an invalid value (6,7), it can result in a hang or slowdown. Check and set it to something sane if it's invalid. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=42162 v2: use pci reg defines from include/linux/pci_regs.h Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: set a default max_pixel_clockDave Airlie2011-08-31
| | | | | | | | | | | On some Power rv100 cards, we have no ATY OF table, but we have no combios table either, and hence we refuse all modes on VGA-0 since we end up with a 0 max pixel clock. Signed-off-by: Dave Airlie <airlied@redhat.com> Cc: stable@kernel.org Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
* drm/radeon/kms: add s/r quirk for Compaq Presario V5245EUAlex Deucher2011-08-30
| | | | | | | | | | | Fixes resume on Compaq Presario V5245EU. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=41642 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: evergreen & ni reset SPI block on CP resumeJerome Glisse2011-08-30
| | | | | | | | | | | For some reason SPI block is in broken state after module unloading. This lead to broken rendering after reloading module. Fix this by reseting SPI block in CP resume function Signed-off-by: Jerome Glisse <jglisse@redhat.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: Fix the number of connector and encoder to cleanup functionsJoonyoung Shim2011-08-29
| | | | | | | | | It is left out the code to decrease the number of connector and encoder to the cleanup functions. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* Merge branch 'drm-intel-fixes' of ↵Linus Torvalds2011-08-26
|\ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915: Fix wrong initializer for "locked" variable in assert_panel_unlocked i915: do not setup intel_backlight twice
| * drm/i915: Fix wrong initializer for "locked" variable in assert_panel_unlockedThomas Jarosch2011-08-25
| | | | | | | | | | | | | | | | | | | | Otherwise it just contains random memory. Issue detected by cppcheck. Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
| * i915: do not setup intel_backlight twiceKamal Mostafa2011-08-22
| | | | | | | | | | | | | | | | | | | | | | | | | | The commit "Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support" adds calls to intel_panel_setup_backlight() from intel_{lvds,dp}_init so do not call it again from intel_setup_outputs(). BugLink: http://bugs.launchpad.net/bugs/831542 Signed-off-by: Kamal Mostafa <kamal@canonical.com> ACKed-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Keith Packard <keithp@keithp.com>
* | drm/radeon: Extended DDC Probing for Toshiba L300D Radeon Mobility X1100 ↵Thomas Reim2011-08-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HDMI-A Connector Toshiba Satellite L300D with ATI Mobility Radeon X1100 sends data to i2c bus for a HDMI connector that is not implemented/existent on the notebook's board. Fix by applying extented DDC probing for this connector. Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines Tested for kernel 2.6.38 on Toshiba Satellite L300D notebook BugLink: http://bugs.launchpad.net/bugs/826677 Signed-off-by: Thomas Reim <reimth@gmail.com> Acked-by: Chris Routh <routhy@gmail.com> Cc: <stable@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/ttm: ensure ttm for new node is bound before calling move_notify()Ben Skeggs2011-08-23
| | | | | | | | | | | | | | | | | | | | This was true for new TTM_PL_SYSTEM and new TTM_PL_TT cases, but wasn't the case on TTM_PL_SYSTEM<->TTM_PL_TT moves, which causes trouble on some paths as nouveau's move_notify() hook requires that the dma addresses be valid at this point. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/ttm: unbind ttm before destroying node in accel move cleanupBen Skeggs2011-08-23
| | | | | | | | | | | | | | | | | | Nouveau makes the assumption that if a TTM is bound there will be a mm_node around for it and the backwards ordering here resulted in a use-after-free on some eviction paths. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/ttm: fix ttm_bo_add_ttm(user) failure pathMarcin Slusarz2011-08-23
| | | | | | | | | | | | | | | | | | | | ttm_tt_destroy kfrees passed object, so we need to nullify a reference to it. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: stable@kernel.org Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/radeon: Make vramlimit parameter actually work.Michel Dänzer2011-08-22
| | | | | | | | | | | | Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/radeon: Explicitly print GTT/VRAM offsets on test failure.Michel Dänzer2011-08-22
| | | | | | | | | | | | | | | | | | Otherwise these would need to be painstakingly calculated looking at the source code. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/radeon: Take IH ring into account for test size calculation.Michel Dänzer2011-08-22
| | | | | | | | | | | | Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/radeon/alpha: Add Alpha support to Radeon DRM codeJay Estabrook2011-08-22
|/ | | | | | | | | | | Alpha needs to have available the system bus address for the Radeon's local memory, so that it can be used in ttm_bo_vm_fault(), when building the PTEs for accessing that VRAM. So, we make bus.addr hold the ioremap() return, and then we can modify bus.base appropriately for use during page fault processing. Signed-off-by: Jay Estabrook <jay.estabrook@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-08-20
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel: drm/i915: set GFX_MODE to pre-Ivybridge default value even on Ivybridge
| * drm/i915: set GFX_MODE to pre-Ivybridge default value even on IvybridgeJesse Barnes2011-08-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prior to Ivybridge, the GFX_MODE would default to 0x800, meaning that MI_FLUSH would flush the TLBs in addition to the rest of the caches indicated in the MI_FLUSH command. However starting with Ivybridge, the register defaults to 0x2800 out of reset, meaning that to invalidate the TLB we need to use PIPE_CONTROL. Since we're not doing that yet, go back to the old default so things work. v2: don't forget to actually *clear* the new bit Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | Merge branch 'drm-intel-fixes' of ↵Linus Torvalds2011-08-15
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915: Cannot set clock gating under UMS drm/i915: Can't do accurate vblank timestamps with UMS Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support. drm/i915: split out PCH refclk update code drm/i915: show interrupt info on IVB drm/i915: Remove unused 'reg' argument to dp_pipe_enabled drm/i915: Fix PCH port pipe select in CPT disable paths drm/i915: Leave LVDS registers unlocked drm/i915: Wait for LVDS panel power sequence
| * | drm/i915: Cannot set clock gating under UMSKeith Packard2011-08-15
| | | | | | | | | | | | | | | | | | | | | | | | The clock gating functions are only assigned under KMS, so don't try to call them under UMS. Signed-off-by: Keith Packard <keithp@keithp.com> Tested-by: Justin P. Mattock <justinmattock@gmail.com>
| * | drm/i915: Can't do accurate vblank timestamps with UMSKeith Packard2011-08-15
| | | | | | | | | | | | | | | | | | | | | | | | Disable this feature when KMS is not running by setting the driver->get_vblank_timestamp function pointer to NULL. Signed-off-by: Keith Packard <keithp@keithp.com> Tested-by: Justin P. Mattock <justinmattock@gmail.com>
| * | Not all systems expose a firmware or platform mechanism for changing the ↵Matthew Garrett2011-08-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | backlight intensity on i915, so add native driver support. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Airlie <airlied@linux.ie> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> Tested-by: Michel Alexandre Salim <salimma@fedoraproject.org> Tested-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Keith Packard <keithp@keithp.com>
| * | drm/i915: split out PCH refclk update codeJesse Barnes2011-08-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | We ought to be calling this from our DPMS routines as well as global state may change and we need to enable/disable clocks. So split out the code in preparation for further changes. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
| * | drm/i915: show interrupt info on IVBJesse Barnes2011-08-09
| |/ | | | | | | | | | | | | | | IVB uses the same interrupt reg layout as SNB, so add an IS_GEN7 to the interrupt debugfs file. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
| * drm/i915: Remove unused 'reg' argument to dp_pipe_enabledKeith Packard2011-08-08
| | | | | | | | | | | | | | Just an extra parameter which isn't actually needed. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * drm/i915: Fix PCH port pipe select in CPT disable pathsKeith Packard2011-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CPT pipe select is different from previous generations (using two bits instead of one). All of the paths from intel_disable_pch_ports were not making this distinction. Mode setting with pipe A turned off would then also force all outputs on pipe B to get turned off as the disable code would mistakenly decide that all of these outputs were on pipe A and turn them off. This is an extension of the CPT DP disable fix (why didn't I fix this then?) Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * drm/i915: Leave LVDS registers unlockedKeith Packard2011-08-08
| | | | | | | | | | | | | | | | | | There's no reason to relock them; it just makes operations more complex. This fixes DPMS where the panel registers were locked making the disable not work. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * drm/i915: Wait for LVDS panel power sequenceKeith Packard2011-08-08
| | | | | | | | | | | | | | | | | | During mode setting, check to make sure the panel power sequencing has completed before doing further operations on the device. This uncovered errors with DPMS not turning the device off as it was left locked. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | drm/radeon/kms: don't try to be smart in the hpd handlerAlex Deucher2011-08-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Attempting to try and turn off disconnected display hw in the hotput handler lead to more problems than it helped. For now just register an event and only attempt the do something interesting with DP. Other connectors are just too problematic: - Some systems have an HPD pin assigned to LVDS, but it's rarely if ever connected properly and we don't really care about hpd events on LVDS anyway since it's always connected. - The HPD pin is wired up correctly for eDP, but we don't really have to do anything since the events since it's always connected. - Some HPD pins fire more than once when you connect/disconnect - etc. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=39882 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/radeon: re-POST the asic on Apple hardware when booted via EFIMatthew Garrett2011-08-12
| | | | | | | | | | | | | | | | | | | | | | | | At least some Apples program the GPU into a state that wedges the engine once userspace starts trying to perform accelerated operations. Executing the Atom init scripts gets the hardware back into a working state. The same hardware works fine when booted via BIOS emulation, so let's just execute the init scripts on Apples when we're using EFI. Signed-off-by: Matthew Garrett <mjg@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/radeon: Allow panel preferred EDID to override BIOS native modeMatthew Garrett2011-08-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have two sources of information about panel capabilities on mobile radeon - the BIOS, which gives us a native mode, and the panel's preferred mode. In theory these two will always match, but there's some corner cases where the BIOS hasn't been fully initialised and so the native mode in it ends up with default values. However, if we get a panel with reasonable EDID, it's probably the case that the panel's preferred mode does actually represent the panel capabilities. This patch handles that case by replacing the native mode with the panel's preferred mode if the resolutions don't match. Systems without a valid internal panel EDID will still use the BIOS native mode. Signed-off-by: Matthew Garrett <mjg@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/radeon/kms: make some watermark messages debug onlyAlex Deucher2011-08-12
| | | | | | | | | | Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/radeon/kms: fix regression is handling >2 heads on cedar/caicosAlex Deucher2011-08-12
| | | | | | | | | | | | | | | | | | Need to add support for 4 crtcs when setting the possible crtcs for the encoders. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/radeon/kms: don't enable connectors that are off in the hotplug handlerAlex Deucher2011-08-12
|/ | | | | | | | | | | | If we get a hotplug event on an connector that is off, don't attempt to turn it on or off, it should already be off. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=728228 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
* Revert "drm/i915: Try enabling RC6 by default (again)"Dave Airlie2011-08-05
| | | | | | | | This reverts commit 4e20fa65a3ea789510eed1a15deb9e8aab2b8202. Francesco Allertsen still has a broken configuration. Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon: Extended DDC Probing for ECS A740GM-M DVI-D ConnectorThomas Reim2011-08-04
| | | | | | | | | | | | | | | | | | | | ECS A740GM-M with ATI RADEON 2100 sends data to i2c bus for a DVI connector that is not implemented/existent on the board. Fix by applying extented DDC probing for this connector. Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines Tested for kernel 2.6.38 on Asus ECS A740GM-M board BugLink: http://bugs.launchpad.net/bugs/810926 Cc: <stable@kernel.org> Signed-off-by: Thomas Reim <reimth@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon: Log Subsystem Vendor and Device InformationThomas Reim2011-08-04
| | | | | | | | | | | | | | | Log PCI subsystem vendor and subsystem device ID in addition to PCI vendor and device ID during kernel mode initialisation. This helps to better identify radeon devices of third-party vendors, e. g. for bug analysis. Tested for kernel 2.6.35, 2.6.38 and 3.0 on Asus M2A-VM HDMI board Cc: <stable@kernel.org> Signed-off-by: Thomas Reim <reimth@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC ↵Thomas Reim2011-08-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Lines (here: Asus M2A-VM HDMI) Some integrated ATI Radeon chipset implementations with add-on HDMI card (e. g. Asus M2A-VM HDMI) indicate the availability of a DDC even when the add-on card is not plugged in or HDMI is disabled in BIOS setup. In this case, drm_get_edid() and drm_edid_block_valid() periodically dump data and kernel errors into system log files and onto terminals. For these connectors DDC probing is extended by a check for a correct EDID header. Only in case a valid EDID header is also found, the (HDMI or DVI) connector will be used by the Radeon driver. This prevents the kernel driver from useless flooding of logs and terminal sessions with EDID dumps and error messages. This patch adds a flag 'requires_extended_probe' to the radeon_connector structure. In function radeon_connector_needs_extended_probe() this flag can be set on a chipset family/vendor/connector type specific basis. In addition, function radeon_ddc_probe() has been adapted to perform extended DDC probing if required by the connector's flag. Requires function drm_edid_header_is_valid() in DRM module provided by [PATCH] drm: Separate EDID Header Check from EDID Block Check. Tested for kernel 2.6.35, 2.6.38 and 3.0 on Asus M2A-VM HDMI board BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=668196 BugLink: http://bugs.launchpad.net/bugs/7228066 Cc: <stable@kernel.org> Signed-off-by: Thomas Reim <reimth@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: Separate EDID Header Check from EDID Block CheckThomas Reim2011-08-04
| | | | | | | | | | | | | | | | Provides function drm_edid_header_is_valid() for EDID header check and replaces EDID header check part of function drm_edid_block_valid() by a call of drm_edid_header_is_valid(). This is a prerequisite to extend DDC probing, e. g. in function radeon_ddc_probe() for Radeon devices, by a central EDID header check. Tested for kernel 2.6.35, 2.6.38 and 3.0 Cc: <stable@kernel.org> Signed-off-by: Thomas Reim <reimth@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: Add NULL check about irq functionsJoonyoung Shim2011-08-04
| | | | | | | | | | The struct drm_driver has some function pointers for irq. They are gpu specific and some functions aren't essential things. This can prevents creation of unnecessary dummy function for irq. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: Fix irq install error handlingJoonyoung Shim2011-08-04
| | | | | | | | | | | | The registered irq should be unregistered by free_irq() if irq_postinstall() returns the error after request_irq() is called successfully. [airlied: add vga switcheroo disable] Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon: fix potential NULL dereference in drivers/gpu/drm/radeon/atom.cBojan Prtvar2011-08-04
| | | | | | | kzalloc() can return NULL, so I added check for it Signed-off-by: Bojan Prtvar <prtvar.b@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon: clean reg header filesFernando Luis Vázquez Cao2011-08-04
| | | | | | | | Reg header files are generated so they are not cleaned automagically. They need to be added to the clean-files list. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/debugfs: Initialise empty variableEmil Velikov2011-08-04
| | | | | | | [airlied: move char declaration] Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* Merge branch 'drm-intel-next' of ↵Dave Airlie2011-08-04
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://master.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 into drm-fixes * 'drm-intel-next' of ssh://master.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: (42 commits) drm/i915: allow cache sharing policy control drm/i915/hdmi: HDMI source product description infoframe support drm/i915/hdmi: split infoframe setting from infoframe type code drm: track CEA version number if present drm/i915: Try enabling RC6 by default (again) Revert "drm/i915/dp: Zero the DPCD data before connection probe" drm/i915/dp: wait for previous AUX channel activity to clear drm/i915: don't use uninitialized EDID bpc values when picking pipe bpp drm/i915/pch: Save/restore PCH_PORT_HOTPLUG across suspend drm/i915: apply phase pointer override on SNB+ too drm/i915: Add quirk to disable SSC on Sony Vaio Y2 drm/i915: provide more error output when mode sets fail drm/i915: add GPU max frequency control file i915: add Dell OptiPlex FX170 to intel_no_lvds drm/i915: Ignore GPU wedged errors while pinning scanout buffers drm/i915/hdmi: send AVI info frames on ILK+ as well drm/i915: fix CB tuning check for ILK+ drm/i915: Flush other plane register writes drm/i915: flush plane control changes on ILK+ as well drm/i915: apply timing generator bug workaround on CPT and PPT ...
| * drm/i915: allow cache sharing policy controlJesse Barnes2011-08-03
| | | | | | | | | | | | | | | | | | | | Expose the SNB+ cache sharing policy register in debugfs. The new file, i915_cache_sharing, has 4 values, 0-3, with 0 being "max uncore resources" and 3 being the minimum. Exposing this control should make benchmarking easier and help us choose a good default. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
| * drm/i915/hdmi: HDMI source product description infoframe supportJesse Barnes2011-08-03
| | | | | | | | | | | | | | Set an SPD infoframe if the sink supports it. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
| * drm/i915/hdmi: split infoframe setting from infoframe type codeJesse Barnes2011-08-03
| | | | | | | | | | | | | | | | This makes it easier to add support for other infoframes (e.g. SPD, vendor specific). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
| * drm: track CEA version number if presentJesse Barnes2011-08-03
| | | | | | | | | | | | | | | | | | | | Drivers need to know the CEA version number in addition to other display info (like whether the display is an HDMI sink) before enabling certain features. So track the CEA version number in the display info structure. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-23 12:37:11 -0500