| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Implement support for the VBLANK IOCTL. Note that Tegra is somewhat
special in this case because it doesn't use the generic IRQ support
provided by the DRM core (DRIVER_HAVE_IRQ) but rather registers one
interrupt handler for each display controller.
While at it, clean up the way that interrupts are enabled to ensure
that the VBLANK interrupt only gets enabled when required.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The sequence for replacing the scanout buffer is much shorter than a
full mode change operation so implementing this callback considerably
speeds up cases where only a new framebuffer is to be scanned out.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Add support for the B and C planes which support RGB and YUV pixel
formats and can be used as overlays or hardware cursor. Currently 32-bit
XRGB as well as UYVY, YUV420 and YUV422 pixel formats are advertised.
Other formats should be easy to add but these are the most common ones
and should cover the majority of use-cases.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Tegra uses the CMA FB helpers so framebuffers passed to the driver need
to use the corresponding functions to access the underlying GEM objects.
This used to work because struct tegra_framebuffer was sufficiently
similar to struct drm_fb_cma but that isn't guaranteed to stay that way.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
|
| | | |/ /
| |/| |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Driver implementations of the drm_crtc's .page_flip() function are
required to update the crtc->fb field on success to reflect that the new
framebuffer is now in use. This is important to keep reference counting
on the framebuffers balanced.
While at it, document this requirement to keep others from falling into
the same trap.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
| | |\ \ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
The summary:
. Add display mode check operaion to mixer driver
- Mixer IP also can put certain restrictions on the proposed
display modes and these restrictions need to be considered
during mode negotiation, which happens immediately after
edid parsing.
. Set correct mode for range of resolutions
- With this patch, the mixer driver could find the correct mode
for the range of resolutions upto 1080 vertical lines.
. Support extra resolution for hdmi
- This patch programs the core and timing generator registers
using the timing data provided in drm_display_mode without
hard-coded configurations. So this patch adds additional PHY
configs to allow us to support more permissible resolutions
and refresh rates.
. Add device tree support for g2d
- This patch adds just the compatible string for exynos5250 SoC
so that with device tree enabling, this driver can be probed.
. And bug fixes and code cleanups.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: Add device tree based discovery support for G2D
drm/exynos: hdmi: support extra resolutions using drm_display_mode timings
drm/exynos: mixer: set correct mode for range of resolutions
drm/exynos: implement display-mode-check callback in mixer driver
drm/exynos: add display-mode-check operation to exynos_mixer_ops struct
drm/exynos: release resources properly when fb creation is failed.
drm/exynos: fix wrong pointer access at vm close.
drm/exynos: Add missing braces around sizeof
drm/exynos: consider exception case to fb handle creation
drm/exynos: fix iommu address allocation order
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
This patch adds device tree match table for Exynos G2D controller.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
This patch programs the core and timing generator registers using the
timing data provided in drm_display_mode and not using hard-coded
configurations.
Additional PHY configs has been added. This allows us to support more
permissible resolutions and refresh rates.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Shirish S <s.shirish@samsung.com>
Signed-off-by: Akshay Saraswat <Akshay.s@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
With this patch, mixer driver find the correct resolution mode for
the range of resolutions, upto 1080 vertical lines. Resolution will
be categorized to NTSC SD, PAL SD or HD and the correct mode is
set to the mixer configuration register.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
This patch adds the implementation of check_timing callback in the mixer
driver. Based on the mixer version, correct set of restrictions will be
exposed by the mixer driver. A resolution will be acceptable only if passes
the criteria set by mixer and hdmi IPs.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
This patch adds the display mode check operation to exynos_mixer_ops
in drm-common-hdmi. In Exynos SoCs, mixer IP can put certain restrictions
on the proposed display modes. These restriction needs to be considered
during mode negotiation, which happens immediately after edid parsing.
Both, mixer check-mode and hdmi check-timing callbacks are called one after
another and ANDed result is returned back.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
This patch releases allocated resources properly when
exynos_user_fb_create() is failed.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
This patch fixes wrong pointer access issue to filp->f_op and
filp->private_data.
The exynos_drm_gem_mmap_ioctl() changes filp->f_op and
filp->private_data temporarily and restore them to use
original ones in exynos_drm_gem_mmap_buffer() but there
was no lock between the changing and the restoring so
wrong pointer access to filp->f_op and filp->private_data
was induced by vm close callback.
So this patch uses mutex lock properly to resolve this issue.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Fixes the following checkpatch warning:
WARNING: sizeof *sgt should be sizeof(*sgt)
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
GETFB ioctl request creates a new handle to only one gem object
so it should check if the given fb has one gem object.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
This patch modifies iommu address allocation order from 64k
to 4k. 64k order causes waste of the io space and this was
our mistakes.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
|
| | |/ / /
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The values of n, m1 and m2 needs to be subtracted by 2 before writing them to
the FP register. The dot clock calculation already thinks of these values in
register form so we must also specify them as such.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
| | |\ \ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
into drm-next
KMS driver for TI LCD controller
* 'tilcdc-next' of git://people.freedesktop.org/~robclark/linux:
drm/tilcdc: add support for LCD panels (v5)
drm/tilcdc: add encoder slave (v2)
drm/i2c: nxp-tda998x (v3)
drm/tilcdc: add TI LCD Controller DRM driver (v4)
drm/nouveau: use i2c encoder helper wrappers
drm: i2c encoder helper wrappers
drm/cma: add debugfs helpers
drm: small fix in drm_send_vblank_event()
drm: Don't set the plane->fb to NULL on successfull set_plane
drm/cma-helper: fixup compilation
Conflicts:
drivers/gpu/drm/Kconfig
drivers/gpu/drm/Makefile
drivers/gpu/drm/drm_fb_cma_helper.c
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Add an output panel driver for LCD panels. Tested with LCD3 cape on
beaglebone.
v1: original
v2: s/of_find_node_by_name()/of_get_child_by_name()/ from Pantelis
Antoniou
v3: add backlight support
v4: rebase to latest of video timing helpers
v5: remove some unneeded fields from panel-info struct, add DT bindings
docs
Signed-off-by: Rob Clark <robdclark@gmail.com>
Tested-by: Koen Kooi <koen@dominion.thruhere.net>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Add output panel driver for i2c encoder slaves.
v1: original
v2: add DT bindings docs, and minor updates for review comments
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Koen Kooi <koen@dominion.thruhere.net>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Driver for the NXP TDA998X i2c hdmi encoder slave.
v1: original
v2: fix npix/nline programming
v3: add Kconfig, fix dup'd MODULE_DESCRIPTION
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Koen Kooi <koen@dominion.thruhere.net>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
A simple DRM/KMS driver for the TI LCD Controller found in various
smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the
CMA helpers. Currently only the TFP410 DVI encoder is supported
(tested with beaglebone + DVI cape). There are also various LCD
displays, for which support can be added (as I get hw to test on),
and an external i2c HDMI encoder found on some boards.
The display controller supports a single CRTC. And the encoder+
connector are split out into sub-devices. Depending on which LCD
or external encoder is actually present, the appropriate output
module(s) will be loaded.
v1: original
v2: fix fb refcnting and few other cleanups
v3: get +/- vsync/hsync from timings rather than panel-info, add
option DT max-bandwidth field so driver doesn't attempt to
pick a display mode with too high memory bandwidth, and other
small cleanups
v4: remove some unneeded stuff from panel-info struct, properly
set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Koen Kooi <koen@dominion.thruhere.net>
|
| | | | | |
| | | | |
| | | | |
| | | | | |
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Simplify life for drivers using an encoder-slave, so that they can make
their drm_encoder_helper_funcs const, rather than needing to dynamically
allocate and populate them.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Add helper to display fb's which can be used directly in drm_info_list:
static struct drm_info_list foo_debugfs_list[] = {
...
{ "fb", drm_fb_cma_debugfs_show, 0 },
};
to display information about CMA fb objects, as well as a
drm_gem_cma_describe() which can be used if the driver bothers to keep
a list of CMA GEM objects.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Initialize e->pipe.. some drivers set this themselves, others do not.
Setting it in drm_send_vblank_event() should help ensure more consistent
behavior with the different drivers.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
We need to clear the local variable to get the refcounting right
(since the reference drm_mode_setplane holds is transferred to the
plane->fb pointer). But should be done _after_ we update the pointer.
Breakage introduced in
commit 6c2a75325c800de286166c693e0cd33c3a1c5ec8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Dec 11 00:59:24 2012 +0100
drm: refcounting for sprite framebuffers
Reported-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
/me grabs a few brown paper bags
So it looks like I've broken compilation in
commit 6aed8ec3f76a22217c9ae183d32b1aa990bed069
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sun Jan 20 17:32:21 2013 +0100
drm: review locking for drm_fb_helper_restore_fbdev_mode
Fix it up again.
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
| | |\ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
into drm-next
More drm-next bits for radeon. Just bug fixes.
* 'drm-next-3.9' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: properly validate the atpx interface
drm/radeon: switch get_gpu_clock() to a callback (v2)
drm/radeon: add a asic callback to get the xclk
drm/radeon: Avoid NULL pointer dereference from atom_index_iio() allocation failure
drm/radeon: remove overzealous warning in hdmi handling
drm/radeon: fix multi-head power profile stability on BTC+ asics
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Some bioses don't set the function mask correctly
which caused required functions to be disabled.
Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=53111
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Cleans up the code for future asics
v2: rebase, fix some missing radeon_asic updates
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
This is required to get the reference clock used
by the gfx engine for things like timestamps. Fixes
support for GL extensions the use timestamps on
certain boards.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
failure
Smatch anlysis:
drivers/gpu/drm/radeon/atom.c:1242 atom_index_iio() error: potential null
dereference 'ctx->iio'. (kzalloc returns null)
Also cleaned up some checks before calls to kfree(). kfree(NULL) is OK.
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Michel Dänzer" <michel.daenzer@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
hdmi audio works fine. The warning just confuses users.
fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=44341
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
vddci needs to track mclk for multi-head.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
| | |\ \ \ \ \
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
restore debugfs vbios, fix multiple actions with supervisor intrs
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau: restore debugfs/vbios.rom support
drm/nv50-/kms: remove UPDATE methods after each encoder disconnect
drm/nvd0/disp: handle multiple actions from one set of supervisor intrs
drm/nv50/disp: handle multiple actions from one set of supervisor intrs
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Supervisor can now handle more than one operation within a single
series of interrupts.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
| | |\| | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
Nothing terribly exciting in here probably:
- reworked thermal stuff from mupuf/I, has a chance of possibly working
well enough when we get to being able to reclock..
- driver will report mmio access faults on chipsets where it's supported
- will now sleep waiting on fences on nv84+ rather than polling
- some cleanup of the internal fencing, looking towards sli/dmabuf sync
- initial support for anx9805 dp/tmds encoder
- nv50+ display fixes related to the above, and also might fix a few
other issues
- nicer error reporting (will log process names with channel errors)
- various other random fixes
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (87 commits)
nouveau: ACPI support depends on X86 and X86_PLATFORM_DEVICES
drm/nouveau/i2c: add support for ddc/aux, and dp link training on anx9805
drm/nv50: initial kms support for off-chip TMDS/DP encoders
drm/nv50-/disp: initial supervisor support for off-chip encoders
drm/nv50-/disp: initial work towards supporting external encoders
drm/nv50-/kms: remove unnecessary wait-for-completion points
drm/nv50-/disp: move DP link training to core and train from supervisor
drm/nv50-/disp: handle supervisor tasks from workqueue
drm/nouveau/i2c: create proper chipset-specific class implementations
drm/nv50-/disp: 0x0000 is a valid udisp config value
drm/nv50/devinit: reverse the logic for running encoder init scripts
drm/nouveau/bios: store a type/mask hash in parsed dcb data
drm/nouveau/i2c: extend type to 16-bits, add lookup-by-type function
drm/nouveau/i2c: aux channels not necessarily on nvio
drm/nouveau/i2c: fix a bit of a thinko in nv_wri2cr helper functions
drm/nouveau/bios: parse external transmitter type if off-chip
drm/nouveau: store i2c port pointer directly in nouveau_encoder
drm/nouveau/i2c: handle i2c/aux mux outside of port lookup function
drm/nv50/graph: avoid touching 400724, it doesn't exist
drm/nouveau: Fix DPMS 1 on G4 Snowball, from snow white to coal black.
...
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
If I build nouveau on ia64, Kconfig warns:
warning: (DRM_NOUVEAU) selects ACPI_WMI which has unmet direct dependencies (X86 && X86_PLATFORM_DEVICES && ACPI)
warning: (DRM_NOUVEAU) selects MXM_WMI which has unmet direct dependencies (X86 && X86_PLATFORM_DEVICES && ACPI_WMI)
Make all the ACPI support depend on X86 and select
X86_PLATFORM_DEVICES.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
DP link training is now handled as part of the supervisor processing,
and can no longer race with it.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
We need to be able to do link training for PIOR-connected ANX9805 from
the third supervisor handler (due to script ordering in the bios, can't
have the "user" call train because some settings are overwritten from
the modesetting bios scripts).
This moves link training for SOR-connected DP encoders to the second
supervisor interrupt, *before* we call the modesetting scripts (yes,
different ordering from PIOR is necessary). This is useful since we
should now be able to remove some hacks to workaround races between
the supervisor and link training paths.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
i2c_algo_bit sleeps...
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
