aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915
Commit message (Collapse)AuthorAge
* drm/i915: use wait_for_vblank instead of msleep(17)Daniel Vetter2012-12-06
| | | | | | | | | | | | | | | | | | | | 17 ms is eerily close to 60 Hz ^-1 Unfortunately this goes back to the original DP enabling for ilk, and unfortunately does not come with a reason for it's existance attached. Some closer inspection of the code and DP specs shows that we set the idle link pattern before we disable the port. And it seems like that the DP spec (or at least our hw) only switch to the idle pattern on the next vblank. Hence a vblank wait at this spot makes _much_ more sense than a really long wait. v2: Rebase fixup. v3: Add comment requested by Paulo Zanoni saying that we don't really know what this wait is for. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: rip out pre-production ilk cpu edp w/aDaniel Vetter2012-12-06
| | | | | | | | | | | | | | | | | | While reading docs I've noticed that this special workaround to select the 1.6 GHz DP clock only applies to pre-production ilk machines. Since the registers we're touching here are rather undocumented and might be harmful on later chips, rip it out. For the Bspec reference of this w/a look in "vol4g CPU Display Registers [DevILK]", Section 4.1.7.1 "DP_A—DisplayPort A Control Register", "DP_PLL_Frequency_Select". v2: Keep a debug message as a hint in case something regresses. Requested by Chris Wilson. Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: move set_pll_edp to intel_dp.cDaniel Vetter2012-12-06
| | | | | | | | | | | | | Now that we enable the cpu edp pll in intel_dp->pre_enable and no longer in crtc_mode_set, we can also move the modeset part to the intel_dp->mode_set callback. Previously this was not possible because the encoder ->mode_set callbacks are called after the crtc mode set callback. v2: Rebase on top of copy&pasted hsw crtc_mode_set. Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: rip out pre-DDI stuff from haswell_crtc_mode_setDaniel Vetter2012-12-06
| | | | | | | | | | | | | | | Especially getting rid of all things lvds is ... great! v2: Drop the two additional pre-hsw hunks noticed by Paulo Zanoni. v3: - handle DP ports correctly (spoted by Paulo) - don't leave {} behind for a single-line block (again spotted by Paulo) - kill another if (IBX || CPT) block Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: be less verbose when handling gmbus/aux irqsPaulo Zanoni2012-12-06
| | | | | | | Having 9500 lines repeated on dmesg does not help me at all. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Remove duplicate and unused register #defines in i915_reg.hDexuan Cui2012-12-06
| | | | | | | | | TRANS_DP_VIDEO_AUDIO is not used at all. The other 3 has duplicated #defines. Signed-off-by: Dexuan Cui <dexuan.cui@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: use _NOTRACE for gmbus/dp aux wait loopsDaniel Vetter2012-12-06
| | | | | | | | | | | | | | Less clutter in the traces. And in both cases we yell rather loud into the logs if we time out. Patch suggested by Chris Wilson. v2: Annotate another I915_READ in dp_aux to be consistent - we filter out all register io in wait_for and similar loops. Chris also suggested to mark all dp_aux register access as _NOTRACE, but I think we should keep all functionally relevant access around, and filter unneeded bits in userspace after the trace is captured. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: irq-drive the dp aux communicationDaniel Vetter2012-12-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: wire up do aux channel done interruptDaniel Vetter2012-12-06
| | | | | | | Doesn't do anything yet than call dp_aux_irq_handler. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: use gmbus irq to wait for gmbus idleDaniel Vetter2012-12-06
| | | | | | | | | | | | | | | | | | | GMBUS_ACTIVE has inverted sense and so doesn't fit into the wait_hw_status helper, hence create a new gmbus_wait_idle functions. Also, we only care about the idle irq event and nothing else, which allows us to use the wait_event_timeout helper directly without jumping through hoops to catch NAKs. Since gen2/3 don't have gmbus interrupts, handle them separately with the old wait_for macro. This shaves another few ms off reading EDID from a hdmi screen on my testbox here. EDID reading with interrupt driven gmbus is now as fast as with busy-looping gmbus at 28 ms here (with negligible cpu overhead). Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: use the gmbus irq for waitsDaniel Vetter2012-12-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need two special things to properly wire this up: - Add another argument to gmbus_wait_hw_status to pass in the correct interrupt bit in gmbus4. - Since we can only get an irq for one of the two events we want, hand-roll the wait_event_timeout code so that we wake up every jiffie and can check for NAKs. This way we also subsume gmbus support for platforms without interrupts (or where those are not yet enabled). The important bit really is to only enable one gmbus interrupt source at the same time - with that piece of lore figured out, this seems to work flawlessly. Ben Widawsky rightfully complained the lack of measurements for the claimed benefits (especially since the first version was actually broken and fell back to bit-banging). Previously reading the 256 byte hdmi EDID takes about 72 ms here. With this patch it's down to 33 ms. Given that transfering the 256 bytes over i2c at wire speed takes 20.5ms alone, the reduction in additional overhead is rather nice. v2: Chris Wilson wondered whether GMBUS4 might contain some set bits when booting up an hence result in some spurious interrupts. Since we clear GMBUS4 after every wait and we do gmbus transfer really early in the setup sequence to detect displays the window is small, but still be paranoid and clear it properly. v3: Clarify the comment that gmbus irq generation can only support one kind of event, why it bothers us and how we work around that limit. Cc: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: wire up gmbus irq handlerDaniel Vetter2012-12-06
| | | | | | | | | | | | | | | | Only enables the interrupt and puts a irq handler into place, doesn't do anything yet. Unfortunately there's no gmbus interrupt support for gen2/3 (safe for pnv, but there the irq is marked as "Test mode"). v2: Wire up the irq handler for vlv and gen4 properly. v3: i915_enable_pipestat expects the mask bit, not the status bits ... and for added hilarity those are rather inconsistently named. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: extract gmbus_wait_hw_statusDaniel Vetter2012-12-06
| | | | | | | | | | | | | | | | | | | | The gmbus interrupt generation is rather fiddly: We can only ever enable one interrupt source (but we always want to check for NAK in addition to the real bit). And the bits in the gmbus status register don't map at all to the bis in the irq register. To prepare for this mess, start by extracting the hw status wait loop into it's own function, consolidate the NAK error handling a bit. To keep things flexible, pass in the status bit we care about (in addition to any NAK signalling). v2: I've failed to notice that the sense of GMBUS_ACTIVE is inverted, Chris Wilson gladly pointed that out for me. To keep things simple, ignore that case for now (we only need to idle the gmbus controller at the end of an entire i2c transaction, not after every message). Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: reorder setup sequence to have irqs for output setupDaniel Vetter2012-12-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise the new&shiny irq-driven gmbus and dp aux code won't work that well. Noticed since the dp aux code doesn't have an automatic fallback with a timeout (since the hw provides for that already). v2: Simple move drm_irq_install before intel_modeset_gem_init, as suggested by Ben Widawsky. v3: Now that interrupts are enabled before all connectors are fully set up, we might fall over serving a HPD interrupt while things are still being set up. Instead of jumping through massive hoops and complicating the code with a separate hpd irq enable step, simply block out the hotplug work item from doing anything until things are in place. v4: Actually, we can enable hotplug processing only after the fbdev is fully set up, since we call down into the fbdev from the hotplug work functions. So stick the hpd enabling right next to the poll helper initialization. v5: We need to enable irqs before intel_modeset_init, since that function sets up the outputs. v6: Fixup cleanup sequence, too. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: setup the hangcheck timer earlyDaniel Vetter2012-12-06
| | | | | | | | | | | | ... together with all the other irq related resources in intel_irq_init. I've managed to oops in the notify_ring function on my ilk, presumably because of the powerctx setup call to i915_gpu_idle. Note that this is only a problem with the reorder irq setup sequence for irq-driver gmbus/dp aux. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: don't handle PIPE_LEGACY_BLC_EVENT_STATUS on vlvDaniel Vetter2012-12-06
| | | | | | | | | | | | This is for legacy legacy stuff, and checking with the leftover pipe from the previous loop is propably not what we want. Since pipe == 2 after the loop ... Then we only assing a variable and do nothing with it. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: haswell has the same irq handlers as ivbDaniel Vetter2012-12-06
| | | | | | | No need to have the exaxt same code twice. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Add intel_ring_handle_seqno wrapMika Kuoppala2012-12-06
| | | | | | | | | | | | | | | If there are pre-wrap values in semaphore-mbox registers after wrap, syncing against some after-wrap request will complete immediately. Fix this by emitting ring commands to set mbox registers to zero when the wrap happens. v2: Use __intel_ring_begin to emit ring commands, from Chris Wilson. Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a small comment to handle_seqno_wrap.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Split intel_ring_beginMika Kuoppala2012-12-06
| | | | | | | | | | In preparation for handling ring seqno wrapping, split intel_ring_begin into helper part which doesn't allocate seqno. Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Fix debugfs seqno info print to use uintMika Kuoppala2012-12-05
| | | | | | | | seqno's are u32 so print accordingly Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Add debugfs entry to read/write next_seqnoMika Kuoppala2012-12-05
| | | | | | | | | | | | | | This is needed for testing seqno wrapping. Be careful to not bump next_seqno more than 0x7FFFFFFF at a time (between some handled requests) as i915_seqno_passed() can't handle bigger difference in between. v2: Address review comments from Chris Wilson. Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Squash in fixup to properly remove the debugfs file on driver unload again.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: fixup sparse warningsDaniel Vetter2012-12-03
| | | | | | | | | | | | | | | | | - __iomem where there is none (I love how we mix these things up). - Use gfp_t instead of an other plain type. - Unconfuse one place about enum pipe vs enum transcoder - for the pch transcoder we actually use the pipe enum. Fixup the other cases where we assign the pipe to the cpu transcoder with explicit casts. - Declare the mch_lock properly in a header. There is still a decent mess in intel_bios.c about __iomem, but heck, this is x86 and we're allowed to do that. Makes-sparse-happy: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Use a space after the cast consistently and fix up the newly-added cast in i915_irq.c to properly use __iomem.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Remove check for conflicting relocation write-domainsChris Wilson2012-12-03
| | | | | | | | | | | | | Simply use the last write-domain set for the object in the batch, trusting userspace to have correctly flushed the caches between usage as a write target. This check dates back from the golden age of having only a single operation per batch with the kernel repeating it for each cliprect, and conflicts both with userspace trying to efficiently batch multiple operations and with reducing the kernel overhead of relocation processing. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Tighten the checks for invalid relocation domainsChris Wilson2012-12-03
| | | | | | | | | | | | Be specific for the GPU domains so that we can detect if userspace ever passed in an invalid combination, as well as accurately reflect the known GPU domains when printing state. Fixes i-g-t/gem_exec_bad_domains References: https://bugs.freedesktop.org/show_bug.cgi?id=57826 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Fix dieing -> dying typoDamien Lespiau2012-12-03
| | | | | Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Use a slab for object allocationChris Wilson2012-11-30
| | | | | | | | | | | | | | | | The primary purpose of this was to debug some use-after-free memory corruption that was causing an OOPS inside drm/i915. As it turned out the corruption was being caused elsewhere and i915.ko as a major user of many objects was being hit hardest. Indeed as we do frequent the generic kmalloc caches, dedicating one to ourselves (or at least naming one for us depending upon the core) aids debugging our own slab usage. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Allocate overlay registers from stolen memoryChris Wilson2012-11-30
| | | | | | | Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Allocate ringbuffers from stolen memoryChris Wilson2012-11-30
| | | | | | | Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Allocate fbcon from stolen memoryChris Wilson2012-11-30
| | | | | | | Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Introduce i915_gem_object_create_stolen()Chris Wilson2012-11-30
| | | | | | | | | | | | | | Allow for the creation of GEM objects backed by stolen memory. As these are not backed by ordinary pages, we create a fake dma mapping and store the address in the scatterlist rather than obj->pages. v2: Mark _i915_gem_object_create_stolen() as static, as noticed by Jesse Barnes. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Support readback of stolen objects upon errorChris Wilson2012-11-30
| | | | | | | Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Allow objects to be created with no backing pages, but stolen spaceChris Wilson2012-11-30
| | | | | | | | | | | | | In order to accommodate objects that are not backed by struct pages, but instead point into a contiguous region of stolen space, we need to make various changes to avoid dereferencing obj->pages or obj->base.filp. First introduce a marker for the stolen object, that specifies its offset into the stolen region and implies that it has no backing pages. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Delay allocation of stolen space for FBCChris Wilson2012-11-30
| | | | | | | | | | | | | | | | | | | | As FBC is commonly disabled due to limitations of the chipset upon output configurations, on many systems FBC is never enabled. For those systems, it is advantageous to make use of the stolen memory for other objects and so we defer allocation of the FBC chunk until we actually require it. This increases the likelihood of that allocation failing, but that in turns means that we are already taking advantage of the stolen memory! As well as delaying the allocation from driver initialisation until the first use of FBC, we also return the stolen block after we finish using it - allowing greater flexibility in our usage of stolen space. A side effect of this is that we can then attempt to allocate only the required amount of space (with a little slack to reduce reallocation rate and avoid fragmentation). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Avoid clearing preallocated regions from the GTTChris Wilson2012-11-30
| | | | | | | | | | | As yet we do not do any preallocation (chicken-and-egg problem), but we may like to preserve anything already allocated by the BIOS or grub and reuse for own purposes after initialising the driver. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Fix detection of base of stolen memoryChris Wilson2012-11-30
| | | | | | | | | | | | | | | | | | | | | The routine to query the base of stolen memory was using the wrong registers and the wrong encodings on virtually every platform. It was not until the G33 refresh, that a PCI config register was introduced that explicitly said where the stolen memory was. Prior to 865G there was not even a register that said where the end of usable low memory was and where the stolen memory began (or ended depending upon chipset). Before then, one has to look at the BIOS memory maps to find the Top of Memory. Alas that is not exported by arch/x86 and so we have to resort to disabling stolen memory on gen2 for the time being. Then SandyBridge enlarged the PCI register to a full 32-bits and change the encoding of the address, so even though we happened to be querying the right register, we read the wrong bits and ended up using address 0 for our stolen data, i.e. notably FBC. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: optimize ilk/snb irq handlerDaniel Vetter2012-11-30
| | | | | | | | | | | | | | | | | | | | | | We only need to read/write the south interrupt register if the corresponding bit is set in the north master interrupt register. Noticed while reading our interrupt handling code. Same optimization has already been applied on ivb in commit 0e43406bcc1868a316eea6012a0a09d992c53521 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed May 9 21:45:44 2012 +0100 drm/i915: Simplify interrupt processing for IvyBridge We can take advantage that the PCH_IIR is a subordinate register to reduce one of the required IIR reads, and that we only need to clear interrupts handled to reduce the writes. And by simply tidying the code we can reduce the line count and hopefully make it more readable. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* i915: convert struct spinlock to spinlock_tLuis R. Rodriguez2012-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | spinlock_t should always be used. LD drivers/gpu/drm/i915/built-in.o CHECK drivers/gpu/drm/i915/i915_drv.c CC [M] drivers/gpu/drm/i915/i915_drv.o CHECK drivers/gpu/drm/i915/i915_dma.c CC [M] drivers/gpu/drm/i915/i915_dma.o CHECK drivers/gpu/drm/i915/i915_irq.c CC [M] drivers/gpu/drm/i915/i915_irq.o CHECK drivers/gpu/drm/i915/i915_debugfs.c drivers/gpu/drm/i915/i915_debugfs.c:558:31: warning: dereference of noderef expression drivers/gpu/drm/i915/i915_debugfs.c:558:39: warning: dereference of noderef expression drivers/gpu/drm/i915/i915_debugfs.c:558:51: warning: dereference of noderef expression drivers/gpu/drm/i915/i915_debugfs.c:558:63: warning: dereference of noderef expression CC [M] drivers/gpu/drm/i915/i915_debugfs.o CHECK drivers/gpu/drm/i915/i915_suspend.c CC [M] drivers/gpu/drm/i915/i915_suspend.o CHECK drivers/gpu/drm/i915/i915_gem.c drivers/gpu/drm/i915/i915_gem.c:3703:14: warning: incorrect type in assignment (different base types) drivers/gpu/drm/i915/i915_gem.c:3703:14: expected unsigned int [unsigned] [usertype] mask drivers/gpu/drm/i915/i915_gem.c:3703:14: got restricted gfp_t drivers/gpu/drm/i915/i915_gem.c:3706:22: warning: invalid assignment: &= drivers/gpu/drm/i915/i915_gem.c:3706:22: left side has type unsigned int drivers/gpu/drm/i915/i915_gem.c:3706:22: right side has type restricted gfp_t drivers/gpu/drm/i915/i915_gem.c:3707:22: warning: invalid assignment: |= drivers/gpu/drm/i915/i915_gem.c:3707:22: left side has type unsigned int drivers/gpu/drm/i915/i915_gem.c:3707:22: right side has type restricted gfp_t drivers/gpu/drm/i915/i915_gem.c:3711:39: warning: incorrect type in argument 2 (different base types) drivers/gpu/drm/i915/i915_gem.c:3711:39: expected restricted gfp_t [usertype] mask drivers/gpu/drm/i915/i915_gem.c:3711:39: got unsigned int [unsigned] [usertype] mask CC [M] drivers/gpu/drm/i915/i915_gem.o CHECK drivers/gpu/drm/i915/i915_gem_context.c CC [M] drivers/gpu/drm/i915/i915_gem_context.o CHECK drivers/gpu/drm/i915/i915_gem_debug.c CC [M] drivers/gpu/drm/i915/i915_gem_debug.o CHECK drivers/gpu/drm/i915/i915_gem_evict.c CC [M] drivers/gpu/drm/i915/i915_gem_evict.o CHECK drivers/gpu/drm/i915/i915_gem_execbuffer.c CC [M] drivers/gpu/drm/i915/i915_gem_execbuffer.o CHECK drivers/gpu/drm/i915/i915_gem_gtt.c CC [M] drivers/gpu/drm/i915/i915_gem_gtt.o CHECK drivers/gpu/drm/i915/i915_gem_stolen.c CC [M] drivers/gpu/drm/i915/i915_gem_stolen.o CHECK drivers/gpu/drm/i915/i915_gem_tiling.c CC [M] drivers/gpu/drm/i915/i915_gem_tiling.o CHECK drivers/gpu/drm/i915/i915_sysfs.c CC [M] drivers/gpu/drm/i915/i915_sysfs.o CHECK drivers/gpu/drm/i915/i915_trace_points.c CC [M] drivers/gpu/drm/i915/i915_trace_points.o CHECK drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_display.c:1736:9: warning: mixing different enum types drivers/gpu/drm/i915/intel_display.c:1736:9: int enum transcoder versus drivers/gpu/drm/i915/intel_display.c:1736:9: int enum pipe drivers/gpu/drm/i915/intel_display.c:3659:48: warning: mixing different enum types drivers/gpu/drm/i915/intel_display.c:3659:48: int enum pipe versus drivers/gpu/drm/i915/intel_display.c:3659:48: int enum transcoder CC [M] drivers/gpu/drm/i915/intel_display.o CHECK drivers/gpu/drm/i915/intel_crt.c CC [M] drivers/gpu/drm/i915/intel_crt.o CHECK drivers/gpu/drm/i915/intel_lvds.c CC [M] drivers/gpu/drm/i915/intel_lvds.o CHECK drivers/gpu/drm/i915/intel_bios.c drivers/gpu/drm/i915/intel_bios.c:706:60: warning: incorrect type in initializer (different address spaces) drivers/gpu/drm/i915/intel_bios.c:706:60: expected struct vbt_header *vbt drivers/gpu/drm/i915/intel_bios.c:706:60: got void [noderef] <asn:2>*vbt drivers/gpu/drm/i915/intel_bios.c:726:42: warning: incorrect type in argument 1 (different address spaces) drivers/gpu/drm/i915/intel_bios.c:726:42: expected void const *<noident> drivers/gpu/drm/i915/intel_bios.c:726:42: got unsigned char [noderef] [usertype] <asn:2>* drivers/gpu/drm/i915/intel_bios.c:727:40: warning: cast removes address space of expression drivers/gpu/drm/i915/intel_bios.c:738:24: warning: cast removes address space of expression CC [M] drivers/gpu/drm/i915/intel_bios.o CHECK drivers/gpu/drm/i915/intel_ddi.c drivers/gpu/drm/i915/intel_ddi.c:87:6: warning: symbol 'intel_prepare_ddi_buffers' was not declared. Should it be static? drivers/gpu/drm/i915/intel_ddi.c:1036:34: warning: mixing different enum types drivers/gpu/drm/i915/intel_ddi.c:1036:34: int enum pipe versus drivers/gpu/drm/i915/intel_ddi.c:1036:34: int enum transcoder CC [M] drivers/gpu/drm/i915/intel_ddi.o drivers/gpu/drm/i915/intel_ddi.c: In function ‘intel_ddi_setup_hw_pll_state’: drivers/gpu/drm/i915/intel_ddi.c:1129:2: warning: ‘port’ may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/i915/intel_ddi.c:1111:12: note: ‘port’ was declared here CHECK drivers/gpu/drm/i915/intel_dp.c CC [M] drivers/gpu/drm/i915/intel_dp.o CHECK drivers/gpu/drm/i915/intel_hdmi.c CC [M] drivers/gpu/drm/i915/intel_hdmi.o CHECK drivers/gpu/drm/i915/intel_sdvo.c CC [M] drivers/gpu/drm/i915/intel_sdvo.o CHECK drivers/gpu/drm/i915/intel_modes.c CC [M] drivers/gpu/drm/i915/intel_modes.o CHECK drivers/gpu/drm/i915/intel_panel.c CC [M] drivers/gpu/drm/i915/intel_panel.o CHECK drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/i915/intel_pm.c:2173:1: warning: symbol 'mchdev_lock' was not declared. Should it be static? CC [M] drivers/gpu/drm/i915/intel_pm.o CHECK drivers/gpu/drm/i915/intel_i2c.c CC [M] drivers/gpu/drm/i915/intel_i2c.o CHECK drivers/gpu/drm/i915/intel_fb.c CC [M] drivers/gpu/drm/i915/intel_fb.o CHECK drivers/gpu/drm/i915/intel_tv.c CC [M] drivers/gpu/drm/i915/intel_tv.o CHECK drivers/gpu/drm/i915/intel_dvo.c CC [M] drivers/gpu/drm/i915/intel_dvo.o CHECK drivers/gpu/drm/i915/intel_ringbuffer.c CC [M] drivers/gpu/drm/i915/intel_ringbuffer.o CHECK drivers/gpu/drm/i915/intel_overlay.c CC [M] drivers/gpu/drm/i915/intel_overlay.o CHECK drivers/gpu/drm/i915/intel_sprite.c CC [M] drivers/gpu/drm/i915/intel_sprite.o CHECK drivers/gpu/drm/i915/intel_opregion.c CC [M] drivers/gpu/drm/i915/intel_opregion.o CHECK drivers/gpu/drm/i915/dvo_ch7xxx.c CC [M] drivers/gpu/drm/i915/dvo_ch7xxx.o CHECK drivers/gpu/drm/i915/dvo_ch7017.c CC [M] drivers/gpu/drm/i915/dvo_ch7017.o CHECK drivers/gpu/drm/i915/dvo_ivch.c CC [M] drivers/gpu/drm/i915/dvo_ivch.o CHECK drivers/gpu/drm/i915/dvo_tfp410.c CC [M] drivers/gpu/drm/i915/dvo_tfp410.o CHECK drivers/gpu/drm/i915/dvo_sil164.c CC [M] drivers/gpu/drm/i915/dvo_sil164.o CHECK drivers/gpu/drm/i915/dvo_ns2501.c CC [M] drivers/gpu/drm/i915/dvo_ns2501.o CHECK drivers/gpu/drm/i915/i915_gem_dmabuf.c CC [M] drivers/gpu/drm/i915/i915_gem_dmabuf.o CHECK drivers/gpu/drm/i915/i915_ioc32.c CC [M] drivers/gpu/drm/i915/i915_ioc32.o CHECK drivers/gpu/drm/i915/intel_acpi.c CC [M] drivers/gpu/drm/i915/intel_acpi.o LD [M] drivers/gpu/drm/i915/i915.o Building modules, stage 2. MODPOST 1 modules CC drivers/gpu/drm/i915/i915.mod.o LD [M] drivers/gpu/drm/i915/i915.ko Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: kill intel_dp_link_clock()Paulo Zanoni2012-11-29
| | | | | | | | Use drm_dp_bw_code_to_link_rate insead. It's the same thing, but supports DP_LINK_BW_5_4 and is also used by the other drivers. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: invert the log inside intel_prepare_ddiPaulo Zanoni2012-11-29
| | | | | | | | | Do an early return in case we don't have DDI instead of having the whole function inside an "if" statement. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: add HAS_DDI checkPaulo Zanoni2012-11-29
| | | | | | | | | | | And use it whenever we call code that uses the DDIs. We already have intel_ddi.c and prefix every function with intel_ddi_something instead of haswell_something, so I think replacing the checks with HAS_DDI makes more sense. Just a cosmetical change, yes I know, but I have this OCD... Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: remove Haswell code from ironlake_fdi_pll_enablePaulo Zanoni2012-11-29
| | | | | | | | This function is not called on Haswell anymore. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: intel_prepare_ddi_buffers should be staticPaulo Zanoni2012-11-29
| | | | | | | | It's not even declared on header files. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: optimize the shmem_pwrite slowpath handlingDaniel Vetter2012-11-29
| | | | | | | | | | | | | | | | | | | | | | | Since we drop dev->struct_mutex when going through the slowpath, the object might have been moved out of the cpu domain. Hence we need to clflush the entire object to ensure that after the ioctl returns, everything is coherent again (interwoven writes are ill-defined anyway). But we only need to do this if we start in the cpu domain and the object requires flushing for coherency. So don't do the flushing if the object is coherent anyway or if we've done in-line clfushing already. v2: i915_gem_clflush_object already checks whether the object is coherent and if so, drops the flushing. Hence we don't need to check that ourselves, simplifying the condition. v3: Reorder the checks for better clarity (and adjust the comment accordingly), suggested by Chris Wilson. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: simplify shmem pwrite/pread slowpath handlingDaniel Vetter2012-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The shmem paths for pwrite/pread used a clever trick to hold onto a single page when dropping the big dev->struct_mutex for the slowpath. But this ran the risk of reinstating (or not completely purging) the backing storage when dropping purgeable objects. Hence the code needed to keep track of whether it ever dropped the lock, and if it did, manually check whether it needs to re-purge the backing storage. But thanks to the pages pin count introduced in commit a5570178c059cec59e9835be20bc8546377fa7b5 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Sep 4 21:02:54 2012 +0100 drm/i915: Pin backing pages whilst exporting through a dmabuf vmap which allowed us to pin the backing storage and remove that page reference trick from shmem_pwrite/read in commit f60d7f0c1d55a935475ab394955cafddefaa6533 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Sep 4 21:02:56 2012 +0100 drm/i915: Pin backing pages for pread and commit 755d22184f1e5015b040acee794542d9cf8a16c5 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Sep 4 21:02:55 2012 +0100 drm/i915: Pin backing pages for pwrite we can now abolish this check. The slowpath cleanup completely disappears from pread, and for pwrite we're only left with the domain fixup in case someone moved the object out of the cpu domain from under us. A follow-on patch will optimize that a notch more. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: enable intel_lvds->pre_pll_enable for ilk+, tooDaniel Vetter2012-11-29
| | | | | | | | | Only two things needed adjustment: - pipe select for PCH_CPT - There's no dithering bit on ilk+ in the lvds ctl reg Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: move intel_update_lvds to intel_lvds->pre_pll_enableDaniel Vetter2012-11-29
| | | | | | | | | | | | | | | | A few things needed to change: - HAS_PCH_SPLIT since ilk+ is not yet converted to this. - s/LVDS/intel_lvds->reg/ to prep for ilk conversion - replace the clock.p2 == 7 check with a is_dual_link check - s/adjusted_mode/intel_lvds->fixed_mode v2: Rebase on top of Jani Nikula's panel rework. I'm wondering whether we shouldn't add an attached_panel pointer to intel_encoder, to replace the encoder private ->attached_connector pointers, since that's essentially what we need. Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: add intel_lvds->regDaniel Vetter2012-11-29
| | | | | | | | | To ditch at least some of the PCH_SPLIT ? PCH_LVDS : LVDS code ... v2: Rebase on top of Jani Nikula's panel rework. Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: track is_dual_link in intel_lvdsDaniel Vetter2012-11-29
| | | | | | | | | | | | | | | | | | Yeah, all users (both the clock selection special cases and the lvds pin pair stuff) are still in common code, but this will change. v2: Rebase on top of Jani Nikula's panel rework. v3: Incorporate review from Paulo Zanoni: - s/__is_dual_link_lvds/compute_is_dual_link_lvds - kill dev_priv->lvds_val - drop spurious whitespace change v4: Add a debug printk to display the dual-link status, as suggested by Paulo Zanoni in review. Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v3) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: move is_dual_link_lvds to intel_lvds.cDaniel Vetter2012-11-29
| | | | | | | | | | | | | Just a prep patch to make this a property of intel_lvds. Makes more sense, removes clutter from intel_display.c and eventually I want to move all the encoder special cases wrt clock handling to encoders anyway. v2: Add an intel_ prefixe to is_dual_link_lvds since it's non-static now. Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: replace ad-hoc dual-link lvds checksDaniel Vetter2012-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | ... with is_dual_link_lvds introduced in commit b03543857fd75876b96e10d4320b775e95041bb7 Author: Takashi Iwai <tiwai@suse.de> Date: Tue Mar 20 13:07:05 2012 +0100 drm/i915: Check VBIOS value for determining LVDS dual channel mode, too All these checks predate this commit and have simply been overlooked. Since we don't support switching between single-link and dual-link modes anyway, this different checks could at best only get in the way of refactorings, and in the worst case cause inconsistencies. v2: Update the comment, we now have a solid way to figure out whether we need dual-link lvds or not (falling back to vbt values as a last resort). We still don't know how to switch between dual-link and single link so leave that part intact. I'm not sure though whether switching between these two modes makes any sense - we always drive the panel at its fixed mode (with a fixed bpc) anyway ... Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-30 18:53:15 -0500