aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpio/Kconfig
Commit message (Collapse)AuthorAge
* drivers/gpio is platform-neutralDavid Brownell2010-06-29
| | | | | | | | | | | Update Kconfig and Makefile in drivers/gpio to discourage inappropriate addition of platform-specific code. [akpm@linux-foundation.org: fix tpyo] Signed-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: rdc321x needs to select MFD_CORERandy Dunlap2010-05-27
| | | | | | | | | | | | | Fix rdc321x-southbridge build: GPIO_RDC321X needs to select MFD_CORE so that the core is built at the same (or higher) tristate level. rdc321x-southbridge.c:(.devinit.text+0x6103): undefined reference to `mfd_add_devices' rdc321x-southbridge.c:(.devexit.text+0xe5f): undefined reference to `mfd_remove_devices' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpio: Add TC35892 GPIO driverRabin Vincent2010-05-27
| | | | | | | | Add a GPIO driver to support the GPIOs on the TC35892 I/O Expander. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpio: Add support for Janz VMOD-TTL Digital IO moduleIra W. Snyder2010-05-27
| | | | | | | | | | | | | | The Janz VMOD-TTL is a MODULbus daughterboard which fits onto any MODULbus carrier board. It essentially consists of some various logic and a Zilog Z8536 CIO Counter/Timer and Parallel IO Unit. The board must be physically configured with jumpers to enable a user to drive output signals. I am only interested in outputs, so I have made this driver as simple as possible. It only supports a very minimal subset of the features provided by the Z8536 chip. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpio: Add support for RDC321x GPIO controllerFlorian Fainelli2010-05-27
| | | | | | | This patch adds a new GPIO driver for the RDC321x SoC GPIO controller. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpio: add Penwell gpio supportAlek Du2010-05-27
| | | | | | | | | | | Intel Penwell chip has two 96 pins GPIO blocks, which are very similiar as Intel Langwell chip GPIO block, except for pin number difference. This patch expends the original Langwell GPIO driver to support Penwell's. Signed-off-by: Alek Du <alek.du@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: add interrupt handling capability to max732xMarc Zyngier2010-05-27
| | | | | | | | | | | | | | Most of the GPIO expanders supported by the max732x driver have interrupt generation capability by reporting changes on input pins through an INT# pin. This patch implements the irq_chip functionnality (edge detection only). Signed-off-by: Marc Zyngier <maz@misterjones.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jebediah Huang <jebediah.huang@gmail.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mfd: Fix lpc_sch related depends/selects, fix build errorRandy Dunlap2010-03-07
| | | | | | | | | | | | | LPC_SCH is selected by GPI_SCH and I2C_ISCH, even when PCI is not enabled, but LPC_SCH depends on PCI, so make GPI_SCH and I2C_ISCH also depend on PCI. Those 2 selects also need to select what LPC_SCH selects, since kconfig does not follow selects. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Denis Turischev <denis@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpio: add Intel SCH GPIO controller driverDenis Turischev2010-03-07
| | | | | Signed-off-by: Denis Turischev <denis@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpiolib: Add WM8994 GPIO supportMark Brown2010-03-07
| | | | | | | The WM8994 has 11 GPIO lines. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpiolib: Add support for WM8350 GPIO controllerMark Brown2010-03-07
| | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpio: introduce it8761e_gpio driver for IT8761E Super I/O chipDenis Turischev2010-03-06
| | | | | | | Signed-off-by: Denis Turischev <denis@compulab.co.il> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: pca953x.c: add interrupt handling capabilityMarc Zyngier2010-03-06
| | | | | | | | | | | | | | | | | | Most of the GPIO expanders controlled by the pca953x driver are able to report changes on the input pins through an *INT pin. This patch implements the irq_chip functionality (edge detection only). The driver has been tested on an Arcom Zeus. [akpm@linux-foundation.org: the compiler does inlining for us nowadays] Signed-off-by: Marc Zyngier <maz@misterjones.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: David Brownell <david-b@pacbell.net> Cc: Nate Case <ncase@xes-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: add driver for MAX7300 I2C GPIO extenderWolfram Sang2010-03-06
| | | | | | | | | | | | | | | | Add the MAX7300-I2C variant of the MAX7301-SPI version. Both chips share the same core logic, so the generic part of the in-kernel SPI-driver is refactored into a generic part. The I2C and SPI specific funtions are then wrapped into seperate drivers picking up the generic part. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Juergen Beisert <j.beisert@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Jean Delvare <khali@linux-fr.org> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: adp5588-gpio: new driver for ADP5588 GPIO expandersMichael Hennerich2010-01-11
| | | | | | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: add GPIO driver for the Timberdale FPGARichard Röjfors2009-12-16
| | | | | | | | | | | | A GPIO driver for the Timberdale FPGA found on the Intel Atom board Russellville. The GPIO driver also has an IRQ-chip to support interrupts on the pins. Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* cs5535: drop the Geode-specific MFGPT/GPIO codeAndres Salomon2009-12-15
| | | | | | | | | | | | | | | With generic modular drivers handling all of this stuff, the geode-specific code can go away. The cs5535-gpio, cs5535-mfgpt, and cs5535-clockevt drivers now handle this. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* cs5535-gpio: add AMD CS5535/CS5536 GPIO driver supportAndres Salomon2009-12-15
| | | | | | | | | | | | | | | | | | | | This creates a CS5535/CS5536 GPIO driver which uses a gpio_chip backend (allowing GPIO users to use the generic GPIO API if desired) while also allowing architecture-specific users directly (via the cs5535_gpio_* functions). Tested on an OLPC machine. Some Leemotes also use CS5536 (with a mips cpu), which is why this is in drivers/gpio rather than arch/x86. Currently, it conflicts with older geode GPIO support; once MFGPT support is reworked to also be more generic, the older geode code will be removed. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: David Brownell <david-b@pacbell.net> Reviewed-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: gpio support for ADP5520/ADP5501 MFD PMICsMichael Hennerich2009-09-23
| | | | | | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: add Intel Moorestown Platform Langwell chip gpio driverAlek Du2009-09-23
| | | | | | | | | | | | The Langwell chip is the IO hub for Intel Moorestown platform which has a 64-pin gpio block device inside. It is exposed as a dedicated PCI device. We use it to control outside peripheral as well as to do IRQ demuxing. The gpio block uses MSI to send level type interrupt to IOAPIC. Signed-off-by: Alek Du <alek.du@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mfd/gpio: add a GPIO interface to the UCB1400 MFD chip driver via gpiolibMarek Vasut2009-09-23
| | | | | | | | | Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Brownell <david-b@pacbell.net> Cc: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: add MC33880 driverRichard Röjfors2009-09-23
| | | | | | | | | A GPIO driver for the Freescale MC33880 High/Low side switch Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: Add WM831X GPIO driverMark Brown2009-09-17
| | | | | | | | | | | | | | | | Add support for the GPIO pins on the WM831x. No direct support is currently supplied for configuring non-gpiolib functionality such as pull configuration and alternate functions, soft configuration of these will be provided in a future patch. Currently use of these pins as interrupts is not supported due to the ongoing issues with generic irq not support interrupt controllers on interrupt driven buses. Users can directly request the interrupts with the wm831x-specific APIs currently provided if required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* MIPS: Update VR41xx GPIO driver to use gpiolibYoichi Yuasa2009-07-03
| | | | | Signed-off-by: Yoichi Yuasa <yyuasa@linux.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* gpio: driver for PrimeCell PL061 GPIO controllerBaruch Siach2009-06-19
| | | | | | | | | | | | | | This is a driver for the ARM PrimeCell PL061 GPIO AMBA peripheral. The driver is implemented using the gpiolib framework. This driver also includes support for the use of the PL061 as an interrupt controller (secondary). Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: David Brownell <david-b@pacbell.net> Acked-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* microblaze: Kconfig: Enable drivers for MicroblazeMichal Simek2009-05-21
| | | | Signed-off-by: Michal Simek <monstr@monstr.eu>
* trivial: fix typos/grammar errors in Kconfig textsMatt LaPlante2009-03-30
| | | | | | Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* gpio: pca953x handles more chips, i2c fault codesDavid Brownell2009-01-06
| | | | | | | | | | | Minor updates to the pca953x GPIO expander driver: handle several more compatible parts, and stop assuming that the I2C layer's return codes are garbage (that's now been fixed). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* GPIO: add new Xilinx driver for powerpcJohn Linn2008-11-12
| | | | | | | | | | | | | | | | This driver supports the Xilinx XPS GPIO IP core which has the typical GPIO features. Signed-off-by: Kiran Sutariya <kirans@xilinx.com> Signed-off-by: John Linn <john.linn@xilinx.com> Cc: David Brownell <david-b@pacbell.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: "Grant Likely" <grant.likely@secretlab.ca> Cc: <avorontsov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mfd: twl4030-gpio driverDavid Brownell2008-10-21
| | | | | | | | | | | | | | This adds basic support for the GPIOs in the twl4030 power management chip. That includes two open drain LED drivers, and the use of GPIO-0 (and GPIO-1) as MMC/SD card detect switches which can control whether the VMMC1 (and VMMC2) regulators are active. This version of the code has a debounce call that will probably be replaced before long, when a more generic interface exists. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* gpio: max732x driverEric Miao2008-07-25
| | | | | | | | | | | | | This adds a driver supporting a family of I2C port expanders from Maxim, which includes the MAX7319 and MAX7320-7327 chips. [dbrownell@users.sourceforge.net: minor fixes] Signed-off-by: Jack Ren <jack.ren@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpiolib: allow user-selectionMichael Buesch2008-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds functionality to the gpio-lib subsystem to make it possible to enable the gpio-lib code even if the architecture code didn't request to get it built in. The archtitecture code does still need to implement the gpiolib accessor functions in its asm/gpio.h file. This patch adds the implementations for x86 and PPC. With these changes it is possible to run generic GPIO expansion cards on every architecture that implements the trivial wrapper functions. Support for more architectures can easily be added. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: David Brownell <david-b@pacbell.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: add bt8xxgpio driverMichael Buesch2008-07-25
| | | | | | | | | | | | | | | | | This adds the bt8xxgpio driver. The purpose of the bt8xxgpio driver is to export all of the 24 GPIO pins available on Brooktree 8xx chips to the kernel GPIO infrastructure. This makes it possible to use a physically modified BT8xx card as cheap digital GPIO card. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: David Brownell <david-b@pacbell.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: sysfs interfaceDavid Brownell2008-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a simple sysfs interface for GPIOs. /sys/class/gpio /export ... asks the kernel to export a GPIO to userspace /unexport ... to return a GPIO to the kernel /gpioN ... for each exported GPIO #N /value ... always readable, writes fail for input GPIOs /direction ... r/w as: in, out (default low); write high, low /gpiochipN ... for each gpiochip; #N is its first GPIO /base ... (r/o) same as N /label ... (r/o) descriptive, not necessarily unique /ngpio ... (r/o) number of GPIOs; numbered N .. N+(ngpio - 1) GPIOs claimed by kernel code may be exported by its owner using a new gpio_export() call, which should be most useful for driver debugging. Such exports may optionally be done without a "direction" attribute. Userspace may ask to take over a GPIO by writing to a sysfs control file, helping to cope with incomplete board support or other "one-off" requirements that don't merit full kernel support: echo 23 > /sys/class/gpio/export ... will gpio_request(23, "sysfs") and gpio_export(23); use /sys/class/gpio/gpio-23/direction to (re)configure it, when that GPIO can be used as both input and output. echo 23 > /sys/class/gpio/unexport ... will gpio_free(23), when it was exported as above The extra D-space footprint is a few hundred bytes, except for the sysfs resources associated with each exported GPIO. The additional I-space footprint is about two thirds of the current size of gpiolib (!). Since no /dev node creation is involved, no "udev" support is needed. Related changes: * This adds a device pointer to "struct gpio_chip". When GPIO providers initialize that, sysfs gpio class devices become children of that device instead of being "virtual" devices. * The (few) gpio_chip providers which have such a device node have been updated. * Some gpio_chip drivers also needed to update their module "owner" field ... for which missing kerneldoc was added. * Some gpio_chips don't support input GPIOs. Those GPIOs are now flagged appropriately when the chip is registered. Based on previous patches, and discussion both on and off LKML. A Documentation/ABI/testing/sysfs-gpio update is ready to submit once this merges to mainline. [akpm@linux-foundation.org: a few maintenance build fixes] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: pcf857x: add lock and handle more chipsDavid Brownell2008-07-22
| | | | | | | | | | | | Two small updates to the pcf857x driver: (a) the max732[89] chips are also second sources for the pcf8574/a, and (b) add a mutex to prevent trashing the cached state. Adding the lock is effectively a bugfix, although it seems unlikely that anyone would have run into the issue it protects against. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: gpio driver for max7301 SPI GPIO expanderJuergen Beisert2008-07-22
| | | | | | | | | | | | | | | Maxim's MAX7301 is an SPI GPIO expander with 28 GPIOs. Note: MAX7301's interrupt feature is not supported yet. [akpm@linux-foundation.org: coding-style fixes] [g.liakhovetski@pengutronix.de: Fix inaccuracies in comments, check spi_setup() return code, mask off high byte in max7301_read()] Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: pca953x (i2c) handles max7310 tooDavid Brownell2008-07-04
| | | | | | | | | | The pca953x driver can handle another 8-bit I/O expander, the max7310. This patch adds that chip to the list of supported IDs in that driver, and expands the Kconfig helptext accordingly. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: rename pca953x symbolsGuennadi Liakhovetski2008-02-06
| | | | | | | | | | | This second part of an extension to support more pca953x chips renames the C and Kconfig symbols. All affected files were updated by sed, except for a couple of obvious exceptions. It also updates the Kconfig helptext. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpiolib: pca9539 i2c gpio expander supporteric miao2008-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | This adds a new-style I2C driver with basic support for the sixteen bit PCA9539 GPIO expanders. These chips have multiple registers, push-pull output drivers, and (not supported in this patch) pin change interrupts. Board-specific code must provide "pca9539_platform_data" with each chip's "i2c_board_info". That provides the GPIO numbers to be used by that chip, and callbacks for board-specific setup/teardown logic. Derived from drivers/i2c/chips/pca9539.c (which has no current known users). This is faster and simpler; it uses 16-bit register access, and cache the OUTPUT and DIRECTION registers for fast access Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mcp23s08 spi gpio expander supportDavid Brownell2008-02-05
| | | | | | | | | | | | | | | | Basic driver for 8-bit SPI based MCP23S08 GPIO expander, without support for IRQs or the shared chipselect mechanism. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Jean Delvare <khali@linux-fr.org> Cc: Eric Miao <eric.miao@marvell.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpiolib: pcf857x i2c gpio expander supportDavid Brownell2008-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a new-style I2C driver for most common 8 and 16 bit I2C based "quasi-bidirectional" GPIO expanders: pcf8574 or pcf8575, and several compatible models (mostly faster, supporting I2C at up to 1 MHz). The driver exposes the GPIO signals using the platform-neutral GPIO programming interface, so they are easily accessed by other kernel code. The lack of such a flexible kernel API has been a big factor in the proliferation of board-specific drivers for these chips... stuff that rarely makes it upstream since it's so ugly. This driver will let such boards use standard calls. Since it's a new-style driver, these devices must be configured as part of board-specific init. That eliminates the need for error-prone manual configuration of module parameters, and makes compatibility with legacy drivers (pcf8574.c, pc8575.c) for these chips easier (there's a clear either/or disjunction). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: Eric Miao <eric.miao@marvell.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpiolib: add drivers/gpio directoryDavid Brownell2008-02-05
Add an empty drivers/gpio directory for gpiolib infrastructure and GPIO expanders. It will be populated by later patches. This won't be the only place to hold such gpio_chip code. Many external chips add a few GPIOs as secondary functionality (such as MFD drivers) and platform code frequently needs to closely integrate GPIO and IRQ support. This is placed *early* in the build/link sequence since it's common for other drivers to depend on GPIOs to do their work, so they must be initialized early in the device_initcall() sequence. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: Eric Miao <eric.miao@marvell.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-05 14:08:26 -0500