aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/firewire/sbp2.c
Commit message (Collapse)AuthorAge
* firewire: sbp2: remove redundant check for bidi commandStefan Richter2015-01-31
| | | | | | | | | | | | | | [Bart van Asche:] SCSI core never sets cmd->sc_data_direction to DMA_BIDIRECTIONAL; scsi_bidi_cmnd(cmd) should be used instead to test for a bidirectional command. [Christoph Hellwig:] Bidirectional commands won't ever be queued anyway, unless a LLD or transport driver sets QUEUE_FLAG_BIDI. So, simply remove the respective queuecommand check in the SBP-2 transport driver. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: replace card lock by target lockStefan Richter2014-12-10
| | | | | | | | | | | | | firewire-core uses fw_card.lock to protect topology data and transaction data. firewire-sbp2 uses fw_card.lock for entirely unrelated purposes. Introduce a sbp2_target.lock to firewire-sbp2 and replace all fw_card.lock uses in the driver. fw_card.lock is now entirely private to firewire-core. This has no immediate advantage apart from making it clear in the code that firewire-sbp2 does not interact with the core via the core lock. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: replace some spin_lock_irqsave by spin_lock_irqStefan Richter2014-12-10
| | | | | | | | | | | | | | | | | | | | | | | Users of card->lock Calling context ------------------------------------------------------------------------ sbp2_status_write AR-req handler, tasklet complete_transaction AR-resp or AT-req handler, tasklet sbp2_send_orb among else scsi host .queuecommand, which may be called in some sort of atomic context sbp2_cancel_orbs sbp2_send_management_orb/ sbp2_{login,reconnect,remove}, worklet or process sbp2_scsi_abort, scsi eh thread sbp2_allow_block sbp2_login, worklet sbp2_conditionally_block among else complete_command_orb, tasklet sbp2_conditionally_unblock sbp2_{login,reconnect}, worklet sbp2_unblock sbp2_{login,remove}, worklet or process Drop the IRQ flags saving from sbp2_cancel_orbs, sbp2_conditionally_unblock, and sbp2_unblock. It was already omitted in sbp2_allow_block. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: protect a reference counter properlyStefan Richter2014-12-10
| | | | | | | | | | | | | | The assertion in the comment in sbp2_allow_block() is no longer true. Or maybe it never was true. At least now, the sole caller of sbp2_allow_block(), sbp2_login, can run concurrently to one of sbp2_unblock()'s callers, sbp2_remove. sbp2_login is performed by sbp2_logical_unit.work. sbp2_remove is performed by fw_device.work. sbp2_remove cancels sbp2_logical_unit.work, but only after it called sbp2_unblock. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: don't use PREPARE_DELAYED_WORKTejun Heo2014-03-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. firewire core-device and sbp2 have been been multiplexing work items with multiple work functions. Introduce fw_device_workfn() and sbp2_lu_workfn() which invoke fw_device->workfn and sbp2_logical_unit->workfn respectively and always use the two functions as the work functions and update the users to set the ->workfn fields instead of overriding work functions using PREPARE_DELAYED_WORK(). This fixes a variety of possible regressions since a2c1c57be8d9 "workqueue: consider work function when searching for busy work items" due to which fw_workqueue lost its required non-reentrancy property. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: linux1394-devel@lists.sourceforge.net Cc: stable@vger.kernel.org # v3.9+ Cc: stable@vger.kernel.org # v3.8.2+ Cc: stable@vger.kernel.org # v3.4.60+ Cc: stable@vger.kernel.org # v3.2.40+
* firewire: sbp2: bring back WRITE SAME supportStefan Richter2013-12-15
| | | | | | | | | | | | | Commit 54b2b50c20a6 "[SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers" disabled WRITE SAME support for all SBP-2 attached targets. But as described in the changelog of commit b0ea5f19d3d8 "firewire: sbp2: allow WRITE SAME and REPORT SUPPORTED OPERATION CODES", it is not required to blacklist WRITE SAME. Bring the feature back by reverting the sbp2.c hunk of commit 54b2b50c20a6. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: stable@kernel.org
* [SCSI] Disable WRITE SAME for RAID and virtual host adapter driversMartin K. Petersen2013-11-28
| | | | | | | | | | | | | | | | | | Some host adapters do not pass commands through to the target disk directly. Instead they provide an emulated target which may or may not accurately report its capabilities. In some cases the physical device characteristics are reported even when the host adapter is processing commands on the device's behalf. This can lead to adapter firmware hangs or excessive I/O errors. This patch disables WRITE SAME for devices connected to host adapters that provide an emulated target. Driver writers can disable WRITE SAME by setting the no_write_same flag in the host adapter template. [jejb: fix up rejections due to eh_deadline patch] Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* firewire: introduce fw_driver.probe and .remove methodsStefan Richter2013-06-09
| | | | | | | | | | | | | | | | | | | | | | | | | FireWire upper layer drivers are converted from generic struct driver.probe() and .remove() to bus-specific struct fw_driver.probe() and .remove(). The new .probe() adds a const struct ieee1394_device_id *id argument, indicating the entry in the driver's device identifiers table which matched the fw_unit to be probed. This new argument is used by the snd-firewire-speakers driver to look up device-specific parameters and methods. There is at least one other FireWire audio driver currently in development in which this will be useful too. The new .remove() drops the unused error return code. Although all in-tree drivers are being converted to the new methods, support for the old methods is left in place in this commit. This allows public developer trees to merge this commit and then move to the new fw_driver methods. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Clemens Ladisch <clemens@ladisch.de> (for sound/firewire/) Cc: Peter Hurley <peter@hurleysoftware.com> (for drivers/staging/fwserial/)
* firewire: remove unnecessary alloc/OOM messagesStefan Richter2013-04-28
| | | | | | These are redundant to log messages from the mm core. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: replace BUG_ON by WARN_ONStefan Richter2013-04-28
| | | | | | | No need to crash and burn if S/G element sizes cannot be set to our liking; just leave a message in the log. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: Remove two unneeded checks for macrosPaul Bolle2013-04-28
| | | | | | | | | The old IEEE 1394 driver stack was removed in v2.6.37. That made the checks for two Kconfig (module) macros unneeded, since they will now always evaluate to true. Remove these two checks. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: allow WRITE SAME and REPORT SUPPORTED OPERATION CODESStefan Richter2012-12-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commits 3c6bdaeab4fd "[SCSI] Add a report opcode helper" 5db44863b6eb "[SCSI] sd: Implement support for WRITE SAME" introduced in-kernel uses of the mentioned commands but cautiously blacklisted them for any IEEE 1394 (SBP-2/3) targets and some other transports. I looked through a range of SBP devices and found that the blacklist flags can be removed: The kernel never attempts these commands if the device's INQUIRY data claim a SCSI revision of less than 0x05. This is the case with all SBP devices that I checked, except for three more recent devices which claimed a revision of 0x05 i.e. conformance with SPC-3 (two devices based on the OXUF936QSE chip but having different firmwares, one based on OXUF934DSB.) I tried "sg_opcodes" from sg3_utils on several older and newer devices and did not encounter any apparent firmware bugs with it. All devices returned Illegal Request/ Invalid command operation code and carried on. I furthermore tried "sg_write_same -U" on the OXUF934DSB device with the same result. Alas I did not have a TRIM enabled SSD available for these tests. All of the bridges were correctly identified by the kernel as "fully provisioned", CD-ROM devices aside. The kernel won't issue WRITE SAME to fully provisioned devices, nor would it attempt REPORT SUPPORTED OPERATION CODES or WRITE SAME with UNMAP bit on devices which do not claim conformance to SPC-3 or later. Hence let's remove the no_report_opcodes and no_write_same blacklist flags so that these commands can be used on newer targets with respective capabilities. I guess the Linux sbp-target could be such a target. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* [SCSI] sd: Implement support for WRITE SAMEMartin K. Petersen2012-11-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement support for WRITE SAME(10) and WRITE SAME(16) in the SCSI disk driver. - We set the default maximum to 0xFFFF because there are several devices out there that only support two-byte block counts even with WRITE SAME(16). We only enable transfers bigger than 0xFFFF if the device explicitly reports MAXIMUM WRITE SAME LENGTH in the BLOCK LIMITS VPD. - max_write_same_blocks can be overriden per-device basis in sysfs. - The UNMAP discovery heuristics remain unchanged but the discard limits are tweaked to match the "real" WRITE SAME commands. - In the error handling logic we now distinguish between WRITE SAME with and without UNMAP set. The discovery process heuristics are: - If the device reports a SCSI level of SPC-3 or greater we'll issue READ SUPPORTED OPERATION CODES to find out whether WRITE SAME(16) is supported. If that's the case we will use it. - If the device supports the block limits VPD and reports a MAXIMUM WRITE SAME LENGTH bigger than 0xFFFF we will use WRITE SAME(16). - Otherwise we will use WRITE SAME(10) unless the target LBA is beyond 0xFFFFFFFF or the block count exceeds 0xFFFF. - no_write_same is set for ATA, FireWire and USB. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] Add a report opcode helperMartin K. Petersen2012-11-14
| | | | | | | | | | | | | | The REPORT SUPPORTED OPERATION CODES command can be used to query whether a given opcode is supported by a device. Add a helper function that allows us to look up commands. We only issue RSOC if the device reports compliance with SPC-3 or later. But to err on the side of caution we disable the command for ATA, FireWire and USB. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* firewire: sbp2: document the absence of alignment requirementsClemens Ladisch2012-05-21
| | | | | | | | | | | | | The SBP-2/3 specifications do not require any alignment of data buffers; only their own data structures need to be quadlet-aligned [SR: or octlet-aligned]. Fix the comments to reflect this, but leave the actual alignment at 32 bits to avoid theoretical problems with target implementations that might handle this incorrectly. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: remove superfluous blk_queue_max_segment_size() callClemens Ladisch2012-05-21
| | | | | | | | The SCSI framework automatically initializes the block queue's segment size with the DMA device's segment size. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: use scsi_dma_(un)mapClemens Ladisch2012-05-21
| | | | | | | | Use the scsi_dma_map/scsi_dma_unmap helper to simplify the code a little. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: give correct DMA device to scsi frameworkClemens Ladisch2012-05-21
| | | | | | | | | | The sbp2 driver does DMA not on the unit but on the card device. The driver worked even with the wrong device because at the moment, it happens to reimplement the DMA functions of the SCSI framework. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* Remove all #inclusions of asm/system.hDavid Howells2012-03-28
| | | | | | | | | Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
* Merge tag 'firewire-updates' of ↵Linus Torvalds2012-03-22
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull IEEE 1394 (FireWire) subsystem updates post v3.3 from Stefan Richter: - Some SBP-2 initiator fixes, side product from ongoing work on a target. - Reintroduction of an isochronous I/O feature of the older ieee1394 driver stack (flush buffer completions); it was evidently rarely used but not actually unused. Matching libraw1394 code is already available. - Be sure to prefix all kernel log messages with device name or card name, and other logging related cleanups. - Misc other small cleanups, among them a small API change that affects sound/firewire/ too. Clemens Ladisch is aware of it. * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (26 commits) firewire: allow explicit flushing of iso packet completions firewire: prevent dropping of completed iso packet header data firewire: ohci: factor out iso completion flushing code firewire: ohci: simplify iso header pointer arithmetic firewire: ohci: optimize control bit checks firewire: ohci: remove unused excess_bytes field firewire: ohci: copy_iso_headers(): make comment match the code firewire: cdev: fix IR multichannel event documentation firewire: ohci: fix too-early completion of IR multichannel buffers firewire: ohci: move runtime debug facility out of #ifdef firewire: tone down some diagnostic log messages firewire: sbp2: replace a GFP_ATOMIC allocation firewire: sbp2: Fix SCSI sense data mangling firewire: sbp2: Ignore SBP-2 targets on the local node firewire: sbp2: Take into account Unit_Unique_ID firewire: nosy: Use the macro DMA_BIT_MASK(). firewire: core: convert AR-req handler lock from _irqsave to _bh firewire: core: fix race at address_handler unregistration firewire: core: remove obsolete comment firewire: core: prefix log messages with card name ...
| * firewire: sbp2: replace a GFP_ATOMIC allocationStefan Richter2012-03-10
| | | | | | | | | | | | | | | | | | | | | | sbp2_send_management_orb() is called by sbp2_login, sbp2_reconnect, and sbp2_remove, all which are able to sleep during memory allocations. Actually, sbp2_send_management_orb() itself is a sleeping function. Login and remove could allocate with GFP_KERNEL but reconnect needs GFP_NOIO to ensure progress in low memory situations. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * firewire: sbp2: Fix SCSI sense data manglingChris Boot2012-02-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SCSI sense data in SBP-2/3 is carried in an unusual format that means we have to un-mangle it on our end before we pass it to the SCSI subsystem. Currently our un-mangling code doesn't quite follow the SBP-2 standard in that we always assume Current and never Deferred error types, we never set the VALID bit, and we mishandle the FILEMARK, EOM and ILI bits. This patch fixes the sense un-mangling to correctly handle those and follow the spec. Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * firewire: sbp2: Ignore SBP-2 targets on the local nodeChris Boot2012-02-22
| | | | | | | | | | | | | | | | | | | | | | The firewire-sbp2 module tries to login to an SBP-2/3 target even when it is running on the local node, which fails because of the inability to fetch data from DMA mapped regions using firewire transactions on the local node. It also doesn't make much sense to have the initiator and target on the same node, so this patch prevents this behaviour. Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (changed the comment)
| * firewire: sbp2: Take into account Unit_Unique_IDChris Boot2012-02-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the target's unit directory contains a Unit_Unique_ID entry, we should use that as the target's GUID for identification purposes. The SBP-2 standards document says: "Although the node unique ID (EUI-64) present in the bus information block is sufficient to uniquely identify nodes attached to Serial Bus, it is insufficient to identify a target when a vendor implements a device with multiple Serial Bus node connections. In this case initiator software requires information by which a particular target may be uniquely identified, regardless of the Serial Bus access path used." [ IEEE T10 P1155D Revision 4, Section 7.6 (page 51) ] and [ IEEE T10 P1467D Revision 5, Section 7.9 (page 74) ] Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * firewire: sbp2: identify to driver core as "firewire_sbp2", not "sbp2"Stefan Richter2012-02-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit eba9ebaaa26d "firewire: sbp2: use dev_printk API" changed messages from e.g. firewire_sbp2: fw3.0: logged in to LUN 0000 (0 retries) to sbp2 fw3.0: logged in to LUN 0000 (0 retries) because the driver calls itself as "sbp2" when registering with driver core and with SCSI core. This is of course confusing, so switch to the name "firewire_sbp2" for driver core in order to match what lsmod and /sys/module/ show. So we are back to firewire_sbp2 fw3.0: logged in to LUN 0000 (0 retries) in the kernel log. This also changes /sys/bus/firewire/drivers/sbp2 /sys/bus/firewire/devices/fw3.0/driver -> [...]/sbp2 /sys/module/firewire_sbp2/drivers/firewire:sbp2 to /sys/bus/firewire/drivers/firewire_sbp2 /sys/bus/firewire/devices/fw3.0/driver -> [...]/firewire_sbp2 /sys/module/firewire_sbp2/drivers/firewire:firewire_sbp2 but "cat /sys/class/scsi_host/host27/proc_name" stays "sbp2" just in case that proc_name is used by any userland. The transport detection in lsscsi is not affected. (Tested with lsscsi version 0.25.) Udev's /dev/disk/by-id and by-path symlinks are not affected either. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * firewire: sbp2: use dev_printk APIStefan Richter2012-01-15
| | | | | | | | | | | | All messages are uniformly prefixed by driver name and device name now. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | module_param: make bool parameters really bool (drivers & misc)Rusty Russell2012-01-12
|/ | | | | | | | | | | | module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* firewire: use clamp and min3 macrosStefan Richter2011-10-09
| | | | | | | Use kernel.h's convenience macros. Also omit a printk that should never happen and won't matter much if it ever happened. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: fold two functions into oneStefan Richter2011-09-16
| | | | | | | | | sbp2_release_target() is folded into its primary user, sbp2_remove(). The only other caller, a failure path in sbp2_probe(), now uses sbp2_remove(). This adds unnecessary cancel_delayed_work_sync() calls to that failure path but results in less code and text. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: move some code to more sensible placesStefan Richter2011-09-16
| | | | | | | | | | | | | | | | | | | | | Implement sbp2_queue_work(), which is now a very simple accessor to one of the struct sbp2_logical_unit members, right after the definition of struct sbp2_logical_unit. Put the sbp2_reconnect() implementation right after the sbp2_login() implementation. They are both part of the SBP-2 access protocol. Implement the driver methods sbp2_probe(), spp2_update(), sbp2_remove() in this order, reflecting the lifetime of an SBP-2 target. Place the sbp2_release_target() implementation right next to sbp2_remove() which is its primary user, and after sbp2_probe() which is the counterpart to sbp2_release_target(). There are no changes to the implementations here, or at least not meant to be. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: remove obsolete reference countingStefan Richter2011-09-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 0278ccd9d53e07c4e699432b2fed9de6c56f506c "firewire: sbp2: fix panic after rmmod with slow targets", the lifetime of an sbp2_target instance does no longer extent past the return of sbp2_remove(). Therefore it is no longer necessary to call fw_unit_get/put() and fw_device_get/put() in sbp2_probe/remove(). Furthermore, said commit also ensures that lu->work is not going to be executed or requeued at a time when the sbp2_target is no longer in use. Hence there is no need for sbp2_target reference counting for lu->work. Other concurrent contexts: - Processes which access the sysfs of the SCSI host device or of one of its subdevices are safe because these interfaces are all removed by scsi_remove_device/host() in sbp2_release_target(). - SBP-2 command block ORB transactions are finished when scsi_remove_device() in sbp2_release_target() returns. - SBP-2 management ORB transactions are finished when cancel_delayed_work_sync(&lu->work) before sbp2_release_target() returns. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: fix panic after rmmod with slow targetsChris Boot2011-08-22
| | | | | | | | | | | | | | | | | | If firewire-sbp2 starts a login to a target that doesn't complete ORBs in a timely manner (and has to retry the login), and the module is removed before the operation times out, you end up with a null-pointer dereference and a kernel panic. [SR: This happens because sbp2_target_get/put() do not maintain module references. scsi_device_get/put() do, but at occasions like Chris describes one, nobody holds a reference to an SBP-2 sdev.] This patch cancels pending work for each unit in sbp2_remove(), which hopefully means there are no extra references around that prevent us from unloading. This fixes my crash. Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: parallelize login, reconnect, logoutStefan Richter2011-05-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The struct sbp2_logical_unit.work items can all be executed in parallel but are not reentrant. Furthermore, reconnect or re-login work must be executed in a WQ_MEM_RECLAIM workqueue. Hence replace the old single-threaded firewire-sbp2 workqueue by a concurrency-managed but non-reentrant workqueue with rescuer. firewire-core already maintains one, hence use this one. In earlier versions of this change, I observed occasional failures of parallel INQUIRY to an Initio INIC-2430 FireWire 800 to dual IDE bridge. More testing indicates that parallel INQUIRY is not actually a problem, but too quick successions of logout and login + INQUIRY, e.g. a quick sequence of cable plugout and plugin, can result in failed INQUIRY. This does not seem to be something that should or could be addressed by serialization. Another dual-LU device to which I currently have access to, an OXUF924DSB FireWire 800 to dual SATA bridge with firmware from MacPower, has been successfully tested with this too. This change is beneficial to environments with two or more FireWire storage devices, especially if they are located on the same bus. Management tasks that should be performed as soon and as quickly as possible, especially reconnect, are no longer held up by tasks on other devices that may take a long time, especially login with INQUIRY and sd or sr driver probe. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: octlet AT payloads can be stack-allocatedStefan Richter2011-05-10
| | | | | | | | | | | | | We do not need slab allocations for ORB pointer write transactions anymore in order to satisfy streaming DMA mapping constraints, thanks to commit da28947e7e36 "firewire: ohci: avoid separate DMA mapping for small AT payloads". (Besides, the slab-allocated buffers that firewire-sbp2 used to provide for 8-byte write requests were still not fully portable since they shared a cacheline with unrelated CPU-accessed data.) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: omit Scsi_Host lock from queuecommandStefan Richter2011-05-10
| | | | | | | | | | | | | | firewire-sbp2 already takes care for internal serialization where required (ORB list accesses), and it does not use cmd->serial_number internally. Hence it is safe to not grab the shost lock around queuecommand. While we are at housekeeping, drop a redundant struct member: sbp2_command_orb.done is set once in a hot path and dereferenced once in a hot path. We can as well dereference sbp2_command_orb.cmd->scsi_done instead. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: revert obsolete 'fix stall with "Unsolicited response"'Stefan Richter2011-03-20
| | | | | | | | Now that firewire-core sets the local node's SPLIT_TIMEOUT to 2 seconds per default, commit a481e97d3cdc40b9d58271675bd4f0abb79d4872 is no longer required. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* SCSI host lock push-downJeff Garzik2010-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* firewire: sbp2: fix stall with "Unsolicited response"Stefan Richter2010-08-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix I/O stalls with some 4-bay RAID enclosures which are based on OXUF936QSE: - Onnto dataTale RSM4QO, old firmware (not anymore with current firmware), - inXtron Hydra Super-S LCM, old as well as current firmware when used in RAID-5 mode, perhaps also in other RAID modes. The stalls happen during heavy or moderate disk traffic in periods that are a multiple of 5 minutes, roughly twice per hour. They are caused by the target responding too late to an ORB_Pointer register write: The target responds after Split_Timeout, hence firewire-core cancels the transaction, and firewire-sbp2 fails the SCSI request. The SCSI core retries the request, that fails again (and again), hence SCSI core calls firewire-sbp2's abort handler (and even the Management_Agent register write in the abort handler has the transaction timeout problem). During all that, the process which issued the I/O is stalled in I/O wait state. Meanwhile, the target actually acts on the first failed SCSI request: It responds to the ORB_Pointer write later (seen in the kernel log as "firewire_core: Unsolicited response") and also finishes the SCSI request with proper status (seen in the kernel log as "firewire_sbp2: status write for unknown orb"). So let's just ignore RCODE_CANCELLED in the transaction callback and wait for the target to complete the ORB nevertheless. This requires a small modification is sbp2_cancel_orbs(); it now needs to call orb->callback() regardless whether fw_cancel_transaction() found the transaction unfinished or finished. A different solution is to increase Split_Timeout on the local node. (Tested: 2000ms timeout; maybe 1000ms or something like that works too. 200ms is insufficient. Standard is 100ms.) However, I rather not do this because any software on any node could change the Split_Timeout to something unsuitable. Or such a large Split_Timeout may be undesirable for other purposes. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: fix memory leak in sbp2_cancel_orbs or at send errorStefan Richter2010-08-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an ORB was canceled (Command ORB i.e. SCSI request timed out, or Management ORB timed out), or there was a send error in the initial transaction, we missed to drop one of the ORB's references and thus leaked memory. Background: In total, we hold 3 references to each Operation Request Block: - 1 during sbp2_scsi_queuecommand() or sbp2_send_management_orb() respectively, - 1 for the duration of the write transaction to the ORB_Pointer or Management_Agent register of the target, - 1 for as long as the ORB stays within the lu->orb_list, until the ORB is unlinked from the list and the orb->callback was executed. The latter one of these 3 references is finished - normally by sbp2_status_write() when the target wrote status for a pending ORB, - or by sbp2_cancel_orbs() in case of an ORB time-out, - or by complete_transaction() in case of a send error. Of them, the latter two lacked the kref_put. Add the missing kref_put()s. Add comments to the gets and puts of references for transaction callbacks and ORB callbacks so that it is easier to see what is supposed to happen. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* Merge firewire branches to be released post v2.6.35Stefan Richter2010-08-02
|\ | | | | | | | | | | | | | | | | | | Conflicts: drivers/firewire/core-card.c drivers/firewire/core-cdev.c and forgotten #include <linux/time.h> in drivers/firewire/ohci.c Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * firewire: remove an unused function argumentStefan Richter2010-06-20
| | | | | | | | | | | | | | | | | | | | | | | | | | void (*fw_address_callback_t)(..., int speed, ...) is the speed that a remote node chose to transmit a request to us. In case of split transactions, firewire-core will transmit the response at that speed. Upper layer drivers on the other hand (firewire-net, -sbp2, firedtv, and userspace drivers) cannot do anything useful with that speed datum, except log it for debug purposes. But data that is merely potentially (not even actually) used for debug purposes does not belong into the API. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * firewire: drop sizeof expressions from some request size argumentsStefan Richter2010-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of fw_card_bm_work()'s lock request, the present sizeof expression is going to be wrong if somebody changes the fw_card's DMA scratch buffer's size in the future. In case of quadlet write requests, sizeof(u32) is just silly; it's 4. In case of SBP-2 ORB pointer write requests, 8 is arguably quicker to understand as the correct and only possible value than sizeof(some_datum). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | Merge branch 'for-linus' of ↵Linus Torvalds2010-03-03
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (23 commits) firewire: ohci: extend initialization log message firewire: ohci: fix IR/IT context mask mixup firewire: ohci: add module parameter to activate quirk fixes firewire: ohci: use an ID table for quirks detection firewire: ohci: reorder struct fw_ohci for better cache efficiency firewire: ohci: remove unused dualbuffer IR code firewire: core: combine a bit of repeated code firewire: core: change type of a data buffer firewire: cdev: increment ABI version number firewire: cdev: add more flexible cycle timer ioctl firewire: core: rename an internal function firewire: core: fix an information leak firewire: core: increase stack size of config ROM reader firewire: core: don't fail device creation in case of too large config ROM blocks firewire: core: fix "giving up on config rom" with Panasonic AG-DV2500 firewire: remove incomplete Bus_Time CSR support firewire: get_cycle_timer optimization and cleanup firewire: ohci: enable cycle timer fix on ALi and NEC controllers firewire: ohci: work around cycle timer bugs on VIA controllers firewire: make PCI device id constant ...
| * firewire: qualify config ROM cache pointers as const pointersStefan Richter2009-12-29
| | | | | | | | | | | | | | | | Several config ROM related functions only peek at the ROM cache; mark their arguments as const pointers. Ditto fw_device.config_rom and fw_unit.directory, as the memory behind them is meant to be write-once. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | block: Rename blk_queue_max_sectors to blk_queue_max_hw_sectorsMartin K. Petersen2010-02-26
|/ | | | | | | | | | | | | The block layer calling convention is blk_queue_<limit name>. blk_queue_max_sectors predates this practice, leading to some confusion. Rename the function to appropriately reflect that its intended use is to set max_hw_sectors. Also introduce a temporary wrapper for backwards compability. This can be removed after the merge window is closed. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* firewire: normalize style of queue_work wrappersStefan Richter2009-10-14
| | | | | | | | | | | | | | | | | A few stylistic changes to unify some code patterns in the subsystem: - The similar queue_delayed_work helpers fw_schedule_bm_work, schedule_iso_resource, and sbp2_queue_work now have the same call convention. - Two conditional calls of schedule_iso_resource are factored into another small helper. - An sbp2_target_get helper is added as counterpart to sbp2_target_put. Object size of firewire-core is decreased a little bit, object size of firewire-sbp2 remains unchanged. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: provide fallback if mgt_ORB_timeout is missingStefan Richter2009-10-14
| | | | | | | | | | | | | | The Unit_Characteristics entry of an SBP-2 unit directory is not mandatory as far as I can tell. If it is missing, we would probably fail to log in into the target because firewire-sbp2 would not wait for status after it sent the login request. The fix moves the cleanup of tgt->mgt_orb_timeout into a place where it is executed exactly once before login, rather than 0..n times depending on the target's config ROM. With targets with one or more Unit_Characteristics entries, the result is the same as before. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: remove a workaround for Momobay FX-3AStefan Richter2009-09-12
| | | | | | The inquiry delay does more harm than good in tests on a recent kernel. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: sbp2: fix status receptionStefan Richter2009-09-12
| | | | | | | | | Per SBP-2 clause 5.3, a target shall store 8...32 bytes of status information. Trailing zeros after the first 8 bytes don't need to be stored, they are implicit. Fix the status write handler to clear all unwritten status data. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-09-05
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: fix freeing of unallocated memory firewire: ohci: fix Ricoh R5C832, video reception firewire: ohci: fix Agere FW643 and multiple cameras firewire: core: fix crash in iso resource management
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-25 00:18:33 -0500