aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/dma/fsldma.c
Commit message (Collapse)AuthorAge
* fsldma: Add DMA_SLAVE supportIra Snyder2009-09-08
| | | | | | | | | | | | | | | | | | | | Use the DMA_SLAVE capability of the DMAEngine API to copy/from a scatterlist into an arbitrary list of hardware address/length pairs. This allows a single DMA transaction to copy data from several different devices into a scatterlist at the same time. This also adds support to enable some controller-specific features such as external start and external pause for a DMA transaction. [dan.j.williams@intel.com: rebased on tx_list movement] Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Acked-by: Li Yang <leoli@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: split apart external pause and request count featuresIra Snyder2009-09-08
| | | | | | | | | | | | | | | | When using the Freescale DMA controller in external control mode, both the request count and external pause bits need to be setup correctly. This was being done with the same function. The 83xx controller lacks the external pause feature, but has a similar feature called external start. This feature requires that the request count bits be setup correctly. Split the function into two parts, to make it possible to use the external start feature on the 83xx controller. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: implement a private tx_listDan Williams2009-09-08
| | | | | | | | | | Drop fsldma's use of tx_list from struct dma_async_tx_descriptor in preparation for removal of this field. Cc: Li Yang <leoli@freescale.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* drivers/dma/fsldma.c: Remove unnecessary semicolonsJoe Perches2009-07-23
| | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: do not clear bandwidth control bits on the 83xx controllerIra Snyder2009-06-16
| | | | | | | | | | | | | | | The 83xx controller does not support the external pause feature. The bit in the mode register that controls external pause on the 85xx controller happens to be part of the bandwidth control settings for the 83xx controller. This patch fixes the driver so that it only clears the external pause bit if the hardware is the 85xx controller. When driving the 83xx controller, the bit is left untouched. This follows the existing convention that mode registers settings are not touched unless necessary. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: enable external start for the 83xx controllerIra Snyder2009-06-16
| | | | | | | | | The 83xx controller has external start capability, but lacks external pause capability. Hook up the external start function pointer for the 83xx controller. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: use PCI Read Multiple commandIra W. Snyder2009-06-16
| | | | | | | | | | | | | | | | | | | | | By default, the Freescale 83xx DMA controller uses the PCI Read Line command when reading data over the PCI bus. Setting the controller to use the PCI Read Multiple command instead allows the controller to read much larger bursts of data, which provides a drastic speed increase. The slowdown due to using PCI Read Line was only observed when a PCI-to-PCI bridge was between the devices trying to communicate. A simple test driver showed an increase from 4MB/sec to 116MB/sec when performing DMA over the PCI bus. Using DMA to transfer between blocks of local SDRAM showed no change in performance with this patch. The dmatest driver was also used to verify the correctness of the transfers, and showed no errors. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Acked-by: Timur Tabi <timur@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: Fix compile warningsKumar Gala2009-05-27
| | | | | | | | | | | | | | | We we build with dma_addr_t as a 64-bit quantity we get: drivers/dma/fsldma.c: In function 'fsl_chan_xfer_ld_queue': drivers/dma/fsldma.c:625: warning: cast to pointer from integer of different size drivers/dma/fsldma.c: In function 'fsl_dma_chan_do_interrupt': drivers/dma/fsldma.c:737: warning: cast to pointer from integer of different size drivers/dma/fsldma.c:737: warning: cast to pointer from integer of different size drivers/dma/fsldma.c: In function 'of_fsl_dma_probe': drivers/dma/fsldma.c:927: warning: cast to pointer from integer of different Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: fix memory leak on error path in fsl_dma_prep_memcpy()Ira Snyder2009-05-22
| | | | | | | | | | | When preparing a memcpy operation, if the kernel fails to allocate memory for a link descriptor after the first link descriptor has already been allocated, then some memory will never be released. Fix the problem by walking the list of allocated descriptors backwards, and freeing the allocated descriptors back into the DMA pool. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Li Yang <leoli@freescale.com>
* fsldma: snooping is not enabled for last entry in descriptor chainIra Snyder2009-05-22
| | | | | | | | | | | | On the 83xx controller, snooping is necessary for the DMA controller to ensure cache coherence with the CPU when transferring to/from RAM. The last descriptor in a chain will always have the End-of-Chain interrupt bit set, so we can set the snoop bit while adding the End-of-Chain interrupt bit. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Li Yang <leoli@freescale.com>
* fsldma: fix infinite loop on multi-descriptor DMA chain completionIra Snyder2009-05-22
| | | | | | | | | | | | | | | | | | | | | | | | | When creating a DMA transaction with multiple descriptors, the async_tx cookie is set to 0 for each descriptor in the chain, excluding the last descriptor, whose cookie is set to -EBUSY. When fsl_dma_tx_submit() is run, it only assigns a cookie to the first descriptor. All of the remaining descriptors keep their original value, including the last descriptor, which is set to -EBUSY. After the DMA completes, the driver will update the last completed cookie to be -EBUSY, which is an error code instead of a valid cookie. This causes dma_async_is_complete() to always return DMA_IN_PROGRESS. This causes the fsldma driver to never cleanup the queue of link descriptors, and the driver will re-run the DMA transaction on the hardware each time it receives the End-of-Chain interrupt. This causes an infinite loop. With this patch, fsl_dma_tx_submit() is changed to assign a cookie to every descriptor in the chain. The rest of the code then works without problems. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Li Yang <leoli@freescale.com>
* fsldma: fix "DMA halt timeout!" errorsIra Snyder2009-05-22
| | | | | | | | | | | | | | | | | When using the DMA controller from multiple threads at the same time, it is possible to get lots of "DMA halt timeout!" errors printed to the kernel log. This occurs due to a race between fsl_dma_memcpy_issue_pending() and the interrupt handler, fsl_dma_chan_do_interrupt(). Both call the fsl_chan_xfer_ld_queue() function, which does not protect against concurrent accesses to dma_halt() and dma_start(). The existing spinlock is moved to cover the dma_halt() and dma_start() functions. Testing shows that the "DMA halt timeout!" errors disappear. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Li Yang <leoli@freescale.com>
* fsldma: fix check on potential fdev->chan[] overflowRoel Kluin2009-05-22
| | | | | | | | Fix the check of potential array overflow when using corrupted channel device tree nodes. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Li Yang <leoli@freescale.com>
* dmaengine: initialize tx_list in dma_async_tx_descriptor_initDan Williams2009-03-25
| | | | | | | | Centralize this common initialization (and one case where ipu_idmac is duplicating ->chan initialization). Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: fix off by one in dma_haltDan Williams2009-03-04
| | | | | | | | | Prevent dev_err from firing even if we successfully detected 'dma-idle' before the full 1ms timeout has elapsed. Acked-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: print correct IRQ on mpc83xxPeter Korsgaard2009-01-16
| | | | | | | | | | | | The mpc83xx variant uses a shared IRQ for all channels, so the individual channel nodes don't have an interrupt property. Fix the code to print the controller IRQ instead if there isn't any for the channel. Acked-by: Timur Tabi <timur@freescale.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: check for NO_IRQ in fsl_dma_chan_remove()Peter Korsgaard2009-01-15
| | | | | | | | | There's no per-channel IRQ on mpc83xx, so only call free_irq if we have one. Acked-by: Timur Tabi <timur@freescale.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: use a valid 'device' for dma_pool_createDan Williams2009-01-12
| | | | | | | | | | | | | | | | | | The dmaengine sysfs implementation was fixed to support proper lifetime rules which means that the current: new_fsl_chan->dev = &new_fsl_chan->common.dev->device; ...retrieves a NULL pointer because new_fsl_chan->common.dev has not been allocated at this point. So, set new_fsl_chan->dev to a valid device. Cc: Li Yang <leoli@freescale.com> Cc: Zhang Wei <zw@zh-kernel.org> Reported-by: Ira Snyder <iws@ovro.caltech.edu> Tested-by: Ira Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* dmaengine: add a release for dma class devices and dependent infrastructureDan Williams2009-01-06
| | | | | | | | | | | | | | | | | | | | | | Resolves: WARNING: at drivers/base/core.c:122 device_release+0x4d/0x52() Device 'dma0chan0' does not have a release() function, it is broken and must be fixed. The dma_chan_dev object is introduced to gear-match sysfs kobject and dmaengine channel lifetimes. When a channel is removed access to the sysfs entries return -ENODEV until the kobject can be released. The bulk of the change is updates to existing code to handle the extra layer of indirection between a dma_chan and its struct device. Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* dmaengine: kill struct dma_client and supporting infrastructureDan Williams2009-01-06
| | | | | | | | | | | | All users have been converted to either the general-purpose allocator, dma_find_channel, or dma_request_channel. Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: allow Freescale Elo DMA driver to be compiled as a moduleTimur Tabi2008-09-26
| | | | | | | | | | | | | | | | | Modify the Freescale Elo / Elo Plus DMA driver so that it can be compiled as a module. The primary change is to stop treating the DMA controller as a bus, and the DMA channels as devices on the bus. This is because the Open Firmware (OF) kernel code does not allow busses to be removed, so although we can call of_platform_bus_probe() to probe the DMA channels, there is no of_platform_bus_remove(). Instead, the DMA channels are manually probed, similar to what fsl_elbc_nand.c does. Cc: Scott Wood <scottwood@freescale.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: remove internal self-test from Freescale Elo DMA driverTimur Tabi2008-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | The Freescale Elo DMA driver runs an internal self-test before registering the channels with the DMA engine. This self-test has a fundemental flaw in that it calls the DMA engine's callback functions directly before the registration. However, the registration initializes some variables that the callback functions uses, namely the device struct. The code works today because there are two device structs: the one created by the DMA engine, and one created by the Open Firmware (OF) subsystem. The self-test currently uses the device struct created by OF. However, in the future, some of the device structs created by OF will be eliminated. This means that the self-test will only have access to the device struct created by the DMA engine. But this device struct isn't initialized when the self-test runs, and this causes a kernel panic. Since there is already a DMA test module (dmatest), the internal self-test code is not useful anyway. It is extremely unlikely that the test will fail in normal usage. It may have been helpful during development, but not any more. Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* dmaengine: Add dma_client parameter to device_alloc_chan_resourcesHaavard Skinnemoen2008-07-08
| | | | | | | | | | | | | | | | A DMA controller capable of doing slave transfers may need to know a few things about the slave when preparing the channel. We don't want to add this information to struct dma_channel since the channel hasn't yet been bound to a client at this point. Instead, pass a reference to the client requesting the channel to the driver's device_alloc_chan_resources hook so that it can pick the necessary information from the dma_client struct by itself. [dan.j.williams@intel.com: fixed up fsldma and mv_xor] Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: fix incorrect exit path for initializationLi Yang2008-07-08
| | | | | | Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Zhang Wei <zw@zh-kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* dmaengine: ack to flags: make use of the unused bits in the 'ack' fieldDan Williams2008-04-17
| | | | | | | | | | | | | | | | | | 'ack' is currently a simple integer that flags whether or not a client is done touching fields in the given descriptor. It is effectively just a single bit of information. Converting this to a flags parameter allows the other bits to be put to use to control completion actions, like dma-unmap, and capture results, like xor-zero-sum == 0. Changes are one of: 1/ convert all open-coded ->ack manipulations to use async_tx_ack and async_tx_test_ack. 2/ set the ack bit at prep time where possible 3/ make drivers store the flags at prep time 4/ add flags to the device_prep_dma_interrupt prototype Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* async_tx: kill ->device_dependency_addedDan Williams2008-04-17
| | | | | | | | | | DMA drivers no longer need to be notified of dependency submission events as async_tx_run_dependencies and async_tx_channel_switch will handle the scheduling and execution of dependent operations. [sfr@canb.auug.org.au: extend this for fsldma] Acked-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: Split the MPC83xx event from MPC85xx and refine irq codes.Zhang Wei2008-04-17
| | | | | | | | | | | Split MPC83xx EOCDI event from MPC85xx EOLNI event, which is also need to update cookie and start the next transfer. The DMA channel irq handler function code is refined. The patch is tested on MPC8377MDS board. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by; Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: Remove CONFIG_FSL_DMA_SELFTEST, keep fsl_dma_self_test() running always.Zhang Wei2008-04-17
| | | | | | | | Always enabling the fsl_dma_self_test() to ensure the DMA controller should works well after the driver probed. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* [POWERPC] fsldma: Use compatiable binding as specKumar Gala2008-03-31
| | | | | | | | | | Documentation/powerpc/booting-without-of.txt specifies the compatiables we should bind to for this driver (elo, eloplus). Use these instead of the extremely specific 'mpc8540' and 'mpc8349' compatiables. Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fsldma: Fix the DMA halt when using DMA_INTERRUPT async_tx transfer.Zhang Wei2008-03-18
| | | | | | | | | | | | The DMA_INTERRUPT async_tx is a NULL transfer, thus the BCR(count register) is 0. When the transfer started with a byte count of zero, the DMA controller will triger a PE(programming error) event and halt, not a normal interrupt. I add special codes for PE event and DMA_INTERRUPT async_tx testing. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: Add a completed cookie updated action in DMA finish interrupt.Zhang Wei2008-03-13
| | | | | | | | | | | | | The patch 'fsldma: do not cleanup descriptors in hardirq context' (commit 222ccf9ab838a1ca7163969fabd2cddc10403fb5) removed descriptors cleanup function to tasklet but the completed cookie do not updated. Thus, the DMA controller will get lots of duplicated transfer interrupts. Just make a completed cookie update in interrupt handler. And keep other cleanup jobs in tasklet function. Tested-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: Add device_prep_dma_interrupt support to fsldma.cZhang Wei2008-03-13
| | | | | | | | | This is a bug that I assigned DMA_INTERRUPT capability to fsldma but missing device_prep_dma_interrupt function. For a bug in dmaengine.c the driver passed BUG_ON() checking. The patch fixes it. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: Fix fsldma.c warning messages when it's compiled under PPC64.Zhang Wei2008-03-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are warning messages reported by Stephen Rothwell with ARCH=powerpc allmodconfig build: drivers/dma/fsldma.c: In function 'fsl_dma_prep_memcpy': drivers/dma/fsldma.c:439: warning: comparison of distinct pointer types lacks a cast drivers/dma/fsldma.c: In function 'fsl_chan_xfer_ld_queue': drivers/dma/fsldma.c:584: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'dma_addr_t' drivers/dma/fsldma.c: In function 'fsl_dma_chan_do_interrupt': drivers/dma/fsldma.c:668: warning: format '%x' expects type 'unsigned int', but argument 5 has type 'dma_addr_t' drivers/dma/fsldma.c:684: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'dma_addr_t' drivers/dma/fsldma.c:684: warning: format '%016llx' expects type 'long long unsigned int', but argument 5 has type 'dma_addr_t' drivers/dma/fsldma.c:701: warning: format '%02x' expects type 'unsigned int', but argument 4 has type 'dma_addr_t' drivers/dma/fsldma.c: In function 'fsl_dma_self_test': drivers/dma/fsldma.c:840: warning: format '%d' expects type 'int', but argument 5 has type 'size_t' drivers/dma/fsldma.c: In function 'of_fsl_dma_probe': drivers/dma/fsldma.c:1010: warning: format '%08x' expects type 'unsigned int', but argument 5 has type 'resource_size_t' This patch fixed the above warning messages. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* fsldma: do not cleanup descriptors in hardirq contextDan Williams2008-03-04
| | | | | | | | | "Cleaning" descriptors involves calling pending callbacks and clients assume that their callback will only ever happen in softirq context. Delay cleanup to the tasklet. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Zhang Wei <wei.zhang@freescale.com>
* dmaengine: add driver for Freescale MPC85xx DMA controllerZhang Wei2008-03-04
The driver implements DMA engine API for Freescale MPC85xx DMA controller, which could be used by devices in the silicon. The driver supports the Basic mode of Freescale MPC85xx DMA controller. The MPC85xx processors supported include MPC8540/60, MPC8555, MPC8548, MPC8641 and so on. The MPC83xx(MPC8349, MPC8360) are also supported. [kamalesh@linux.vnet.ibm.com: build fix] [dan.j.williams@intel.com: merge mm fixes, rebase on async_tx-2.6.25] Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> Acked-by: Kumar Gala <galak@gate.crashing.org> Cc: Shannon Nelson <shannon.nelson@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>