aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/clk/ti
Commit message (Collapse)AuthorAge
* clk: don't use __initconst for non-const arraysUwe Kleine-König2015-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | The statement static const char *name[]; defines a modifiable array of pointers to constant chars. That is *name[0] = 'f'; is forbidden, but name[0] = "f"; is not. So marking an array that is defined as above with __initconst is wrong. Either an additional const must be added such that the whole definition reads: static const char *const name[] __initconst; or where this is not possible __initdata must be used. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michael Turquette <mturquette@linaro.org>
* clk: constify of_device_id arrayFabian Frederick2015-04-01
| | | | | | | | | | | of_device_id is always used as const. (See driver.of_match_table and open firmware functions) __initdata updated to __initconst for static const struct of_device_id ti_clkdm_match_table[] Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* Merge branch 'for-4.1-clk-ti' of github.com:t-kristo/linux-pm into clk-nextMichael Turquette2015-03-24
|\
| * clk: ti: Implement FAPLL set_rate for the PLLTony Lindgren2015-03-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we have a fractional divider for the synthesizer, just implement a simple multiply logic for the PLL. It seems the PLL divider needs to have also the multiplier set for the PLL to lock. At least I have not yet figured out if divided rates are doable. So let's just ignore the PLL divider for now as the synthesizer has both integer and fractional dividers so we don't even need to use the PLL divider for the rates we know work with PLL locking. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * clk: ti: Implement FAPLL set_rate for the synthesizerTony Lindgren2015-03-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We can pretty much get any rate out of the FAPLL because of the fractional divider. Let's first try just adjusting the post divider, and if that is not enough, then reprogram both the fractional divider and the post divider. Let's also add a define for the fixed SYNTH_PHASE_K instead of using 8. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * clk: ti: Fix FAPLL recalc_rate for rounding errorsTony Lindgren2015-03-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to round the calculated value to have it match the requested rate. While at it, let's fix a typo and use a define for SYNTH_MAX_DIV_M as we will need it in later patches for set_rate. And let's remove two unused includes. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * clk: ti: DRA7: Add timer_sys_ck aliases for Timers 13 through 16Suman Anna2015-03-24
| | | | | | | | | | | | | | | | | | | | The OMAP DMTimer API, omap_dm_timer_set_source(), uses the clock name timer_sys_ck for setting a timer's clock source for the source index OMAP_TIMER_SRC_SYS_CLK. There is currently no clock alias data for the Timers 13 through 16 for this clock name, so add the same. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * clk: ti: DRA7: Correct timer_sys_ck clock aliases for TimersSuman Anna2015-03-24
| | | | | | | | | | | | | | | | | | | | | | | | | | The OMAP DMTimer API, omap_dm_timer_set_source(), can set the parent of a timer node using 3 different values that use fixed parent names for the clocks. The parent name, timer_sys_ck, is used for setting the parent when used with the source index OMAP_TIMER_SRC_SYS_CLK. This should point to the TIMER_SYS_CLK and not the SYSCLKIN2, so correct the clock aliases appropriately. SYSCLKIN2 is not a mandatory clock input. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * clk: ti: OMAP5: Correct the DT clock aliases for timersSuman Anna2015-03-24
| | | | | | | | | | | | | | | | | | | | | | The DT clock aliases for Timers use the legacy (non-DT) device names and a source clock named sys_ck. OMAP5 is DT-boot only, so correct the DT clock aliases to use the DT device names instead. Also, the source clock name is corrected from 'sys_ck' to 'timer_sys_ck', the name used by the OMAP dmtimer driver. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * clk: ti: OMAP4: Remove the legacy timer DT clock aliasesSuman Anna2015-03-24
| | | | | | | | | | | | | | | | | | | | The DT clock aliases for timers using the legacy OMAP timer device names have been cleaned up. These device names reflect the names used in legacy boot, and are no longer applicable as OMAP4 is DT boot only now. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * clk: ti: clk-3xxx-legacy: Correct McBSP related clock aliasesPeter Ujfalusi2015-03-24
| | | | | | | | | | | | | | | | | | | | | | | | | | Correct the McBSP2/4 ick mapping (they were 2->4 and 4->2). Add missing mcbsp clock aliases. Collect the McBSP clock definition in one location at the same time. Fixes the following warning on boot: [ 0.307739] omap_hwmod: mcbsp2: _wait_target_ready failed: -16 [ 0.307769] omap_hwmod: mcbsp2: cannot be enabled for reset (3) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * clk: ti: clk-3xxx: Correct McBSP related DT clock definitionsPeter Ujfalusi2015-03-24
| | | | | | | | | | | | | | | | | | | | | | | | | | In DT boot we do not have devices named as omap-mcbsp.X. Correct the McBSP2/4 ick mapping (they were 2->4 and 4->2). Collect the McBSP clock definition in one location at the same time. Fixes the following warning on boot: [ 0.307739] omap_hwmod: mcbsp2: _wait_target_ready failed: -16 [ 0.307769] omap_hwmod: mcbsp2: cannot be enabled for reset (3) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * clk: ti: fix ti_clk_get_reg_addr error handlingTero Kristo2015-03-24
| | | | | | | | | | | | | | | | | | | | | | | | There is a case where NULL can be a valid return value for ti_clk_get_reg_addr, specifically the case where both the provider index and register offsets are zero. In this case, the current error checking against a NULL pointer will fail. Thus, change the API to return a ERR_PTR value in an error case, and change all the users of this API to check against IS_ERR instead. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Michael Turquette <mturquette@linaro.org>
* | clk: ti: Fix FAPLL parent enable bit handlingTony Lindgren2015-02-25
|/ | | | | | | | | | | | | | | Commit 163152cbbe32 ("clk: ti: Add support for FAPLL on dm816x") added basic support for the FAPLL on dm818x, but has a bug for the parent PLL enable bit. The FAPLL_MAIN_PLLEN is defined as BIT(3) but the code is doing a shift on it. This means the parent PLL won't get disabled even if all it's child synthesizers are disabled. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
* clk: omap: compile legacy omap3 clocks conditionallyArnd Bergmann2015-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'ARM: OMAP3: legacy clock data move under clk driver' patch series causes build errors when CONFIG_OMAP3 is not set: drivers/clk/ti/dpll.c: In function 'ti_clk_register_dpll': drivers/clk/ti/dpll.c:199:31: error: 'omap3_dpll_ck_ops' undeclared (first use in this function) const struct clk_ops *ops = &omap3_dpll_ck_ops; ^ drivers/clk/ti/dpll.c:199:31: note: each undeclared identifier is reported only once for each function it appears in drivers/clk/ti/dpll.c:259:10: error: 'omap3_dpll_per_ck_ops' undeclared (first use in this function) ops = &omap3_dpll_per_ck_ops; ^ drivers/built-in.o: In function `ti_clk_register_gate': drivers/clk/ti/gate.c:179: undefined reference to `clkhwops_omap3430es2_dss_usbhost_wait' drivers/clk/ti/gate.c:179: undefined reference to `clkhwops_am35xx_ipss_module_wait' -in.o: In function `ti_clk_register_interface': drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_hsotgusb_wait' drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_dss_usbhost_wait' drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_ssi_wait' drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_am35xx_ipss_wait' drivers/built-in.o: In function `ti_clk_register_composite': :(.text+0x3da768): undefined reference to `ti_clk_build_component_gate' In order to fix that problem, this patch makes the omap3 legacy code compiled only when both CONFIG_OMAP3 and CONFIG_ATAGS are set. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
* Merge branch 'clk-omap-legacy' into clk-nextMichael Turquette2015-02-02
|\ | | | | | | | | Conflicts: arch/arm/mach-omap2/cclock3xxx_data.c
| * clk: ti: add omap3 legacy clock dataTero Kristo2015-01-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduces omap3 legacy clock data under clock driver. The clock data is also in new format, which makes it possible to get rid of the clk-private.h header. This patch also introduces SoC specific init functions that shall be called from the low level init. The data format used in this file has two possible evolution paths; it can either be removed completely once no longer needed, or it will be possible to retain the format and modify the TI clock driver to be a loadable module at some point. The actual path to be followed will be decided later. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
| * clk: ti: composite: add support for legacy composite clock initTero Kristo2015-01-30
| | | | | | | | | | | | | | | | | | Legacy clock data is initialized slightly differently compared to DT clocks, thus add support for this. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
| * clk: ti: dpll: add support for legacy DPLL initTero Kristo2015-01-30
| | | | | | | | | | | | | | | | | | Legacy clock data is initialized slightly differently compared to DT clocks, thus add support for this. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
| * clk: ti: divider: add support for legacy divider initTero Kristo2015-01-30
| | | | | | | | | | | | | | | | | | Legacy clock data is initialized slightly differently compared to DT clocks, thus add support for this. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
| * clk: ti: interface: add support for legacy interface clock initTero Kristo2015-01-30
| | | | | | | | | | | | | | | | | | | | | | Legacy clock data is initialized slightly differently compared to DT clocks, thus add support for this. The interface clock descriptor itself is overloading the gate clock descriptor, thus it needs to be called from the gate setup. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
| * clk: ti: gate: add support for legacy gate initTero Kristo2015-01-30
| | | | | | | | | | | | | | | | | | Legacy clock data is initialialized slightly differently compared to DT clocks, thus add support for this. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
| * clk: ti: mux: add support for legacy mux initTero Kristo2015-01-30
| | | | | | | | | | | | | | | | | | Legacy clock data is initialized slightly differently compared to DT clocks, thus add support for this. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
| * clk: ti: add core support for initializing legacy clocksTero Kristo2015-01-30
| | | | | | | | | | | | | | | | | | | | | | Legacy clock data for OMAP3 is being moved under clock driver, thus base support for this is needed. This patch adds basic definitions for clock init descriptors and core infrastructure for initialization, which will be called from the OMAP3 clock init. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
* | clk: ti: Drop use of clk-private.hStephen Boyd2015-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | These modules don't need to include clk-private.h. Replace the include with clk.h because these modules are clock consumers and also include clk-provider.h in clk/ti.h because struct clk_hw_omap has a struct clk_hw embedded in it. Cc: Tero Kristo <t-kristo@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
* | clk: ti: Initialize clocks for dm816xTony Lindgren2015-01-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clocks on ti81xx are not compatible with omap3. On dm816x the clock source is a FAPLL (Flying Adder PLL), and on dm814x there seems to be an APLL (All Digital PLL). Let's fix up things for dm816x in preparation for adding the FAPLL support. As we already have a dummy ti81xx_dt_clk_init() in place, let's use that for now to avoid adding a dependency to the omap patches. Later on if somebody adds dm814x support we can split the ti81xx_dt_clk_init() clock init function as needed. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
* | clk: ti: Add support for FAPLL on dm816xTony Lindgren2015-01-20
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On dm816x the clocks are sourced from a FAPLL (Flying Adder PLL) that does not seem to be used on the other omap variants. There are four instances of the FAPLL on dm816x that each have three to seven child synthesizers. I've set up the FAPLL as a single fapll.c driver. Later on we could potentially have the PLL code generic. To do that, we would have to consider the following: 1. Setting the PLL to bypass mode also sets the child synthesizers into bypass mode. As the bypass rate can also be generated by the PLL in regular mode, there's no way for the child synthesizers to detect the bypass mode based on the parent clock rate. 2. The PLL registers control the power for each of the child syntheriser. Note that the clocks are currently still missing the set_rate implementation so things are still running based on the bootloader values. That's OK for now as most of the outputs have dividers and those can be set using the existing TI component clock code. I have verified that the extclk rates are correct for a few clocks, so adding the set_rate support should be fairly trivial later on. This code is partially based on the TI81XX-LINUX-PSP-04.04.00.02 patches published at: http://downloads.ti.com/dsps/dsps_public_sw/psp/LinuxPSP/TI81XX_04_04/04_04_00_02/index_FDS.html Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
* ARM: OMAP3+: DPLL: use determine_rate() and set_rate_and_parent()Tero Kristo2014-11-13
| | | | | | | | | | | Currently, DPLLs are hiding the gory details of switching parent within set_rate, which confuses the common clock code and is wrong. Fixed by applying the new determine_rate() and set_rate_and_parent() functionality to any clock-ops previously using the broken approach. This patch also removes the broken legacy code. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* Merge branch 'for-v3.18/ti-clk-driver' of github.com:t-kristo/linux-pm into ↵Mike Turquette2014-09-30
|\ | | | | | | clk-next
| * clk: ti: dra7-atl-clock: Mark the device as pm_runtime_irq_safePeter Ujfalusi2014-09-29
| | | | | | | | | | | | | | It is safe to call the pm sync calls in interrupt context in this driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * clk: ti: LLVMLinux: Move __init outside of type definitionBehan Webster2014-09-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As written, the __init for ti_clk_get_div_table is in the middle of the return type. The gcc documentation indicates that section attributes should be added to the end of the function declaration: extern void foobar (void) __attribute__ ((section ("bar"))); However gcc seems to be very permissive with where attributes can be placed. clang on the other hand isn't so permissive, and fails if you put the section definition in the middle of the return type: drivers/clk/ti/divider.c:298:28: error: expected ';' after struct static struct clk_div_table ^ ; drivers/clk/ti/divider.c:298:1: warning: 'static' ignored on this declaration [-Wmissing-declarations] static struct clk_div_table ^ drivers/clk/ti/divider.c:299:9: error: type specifier missing, defaults to 'int' [-Werror,-Wimplicit-int] __init *ti_clk_get_div_table(struct device_node *node) ~~~~~~ ^ drivers/clk/ti/divider.c:345:9: warning: incompatible pointer types returning 'struct clk_div_table *' from a function with result type 'int *' [-Wincompatible-pointer-types] return table; ^~~~~ drivers/clk/ti/divider.c:419:9: warning: incompatible pointer types assigning to 'const struct clk_div_table *' from 'int *' [-Wincompatible-pointer-types] *table = ti_clk_get_div_table(node); ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~ 3 warnings and 2 errors generated. By convention, most of the kernel code puts section attributes between the return type and function name. In the case where the return type is a pointer, it's important to place the '*' on left of the __init. This updated code works for both gcc and clang. Signed-off-by: Behan Webster <behanw@converseincode.com> Reviewed-by: Mark Charlebois <charlebm@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * clk: ti: consider the fact that of_clk_get() might return an errorSebastian Andrzej Siewior2014-09-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | I "forgot" to update the dtb and the kernel crashed: |Unable to handle kernel NULL pointer dereference at virtual address 0000002e |PC is at __clk_get_flags+0x4/0xc |LR is at ti_dt_clockdomains_setup+0x70/0xe8 because I did not have the clock nodes. of_clk_get() returns an error pointer which is not checked here. Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * clk: ti: dra7-atl-clock: fix a memory leakTero Kristo2014-09-29
| | | | | | | | | | | | | | | | | | | | | | of_clk_add_provider makes an internal copy of the parent_names property while its called, thus it is no longer needed after this call and can be freed. Signed-off-by: Tero Kristo <t-kristo@ti.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
| * clk: ti: change clock init to use generic of_clk_initTero Kristo2014-09-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, the TI clock driver initialized all the clocks hierarchically under each separate clock provider node. Now, each clock that requires IO access will instead check their parent node to find out which IO range to use. This patch allows the TI clock driver to use a few new features provided by the generic of_clk_init, and also allows registration of clock nodes outside the clock hierarchy (for example, any external clocks.) Signed-off-by: Tero Kristo <t-kristo@ti.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Stefan Assmann <sassmann@kpanic.de> Acked-by: Tony Lindgren <tony@atomide.com>
* | clk: Remove .owner field for driverKiran Padwal2014-09-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to init .owner field. Based on the patch from Peter Griffin <peter.griffin@linaro.org> "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* | clk: ti: dra7-atl: Provide error check for incoming parameters in set_rateNishanth Menon2014-08-21
| | | | | | | | | | | | | | | | | | | | | | | | Check for valid parameters in check rate. Else, we end up getting errors. This occurs as part of the inital clock tree update of child clock nodes where new_rate could be 0 for non functional clocks. Fixes: 9ac33b0ce81fa48 (" CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)") Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
* | clk: ti: divider: Provide error check for incoming parameters in set_rateNishanth Menon2014-08-21
|/ | | | | | | | | | | | | | | | | | | | Check for valid parameters in check rate. Else, we end up getting errors like: [ 0.000000] Division by zero in kernel. [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.17.0-rc1 #1 [ 0.000000] [<c0015160>] (unwind_backtrace) from [<c0011978>] (show_stack+0x10/0x14) [ 0.000000] [<c0011978>] (show_stack) from [<c055f5f4>] (dump_stack+0x78/0x94) [ 0.000000] [<c055f5f4>] (dump_stack) from [<c02e17cc>] (Ldiv0+0x8/0x10) [ 0.000000] [<c02e17cc>] (Ldiv0) from [<c047d228>] (ti_clk_divider_set_rate+0x14/0x14c) [ 0.000000] [<c047d228>] (ti_clk_divider_set_rate) from [<c047a938>] (clk_change_rate+0x138/0x180) [ 0.000000] [<c047a938>] (clk_change_rate) from [<c047a908>] (clk_change_rate+0x108/0x180) This occurs as part of the inital clock tree update of child clock nodes where new_rate could be 0 for non functional clocks. Fixes: b4761198bfaf296 ("CLK: ti: add support for ti divider-clock") Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
* Merge tag 'clk-for-linus-3.17' of ↵Linus Torvalds2014-08-04
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/mike.turquette/linux Pull clock framework updates from Mike Turquette: "The clock framework changes for 3.17 are mostly additions of new clock drivers and fixes/enhancements to existing clock drivers. There are also some non-critical fixes and improvements to the framework core. Changes to the clock framework core include: - improvements to printks on errors - flattening the previously hierarchal structure of per-clock entries in debugfs - allow per-clock debugfs entries that are specific to a particular clock driver - configure initial clock parent and/or initial clock rate from Device Tree - several feature enhancements to the composite clock type - misc fixes New clock drivers added include: - TI Palmas PMIC - Allwinner A23 SoC - Qualcomm APQ8084 and IPQ8064 SoCs - Rockchip rk3188, rk3066 and rk3288 SoCs - STMicroelectronics STiH407 SoC - Cirrus Logic CLPS711X SoC Many fixes, feature enhancements and further clock tree support for existing clock drivers also were merged, such as Samsung's "ARMCLK down" power saving feature for their Exynos4 & Exynos5 SoCs" * tag 'clk-for-linus-3.17' of git://git.linaro.org/people/mike.turquette/linux: (86 commits) clk: Add missing of_clk_set_defaults export clk: checking wrong variable in __set_clk_parents() clk: Propagate any error return from debug_init() clk: clps711x: Add DT bindings documentation clk: Add CLPS711X clk driver clk: st: Use round to closest divider flag clk: st: Update frequency tables for fs660c32 and fs432c65 clk: st: STiH407: Support for clockgenA9 clk: st: STiH407: Support for clockgenD0/D2/D3 clk: st: STiH407: Support for clockgenC0 clk: st: Add quadfs reset handling clk: st: Add polarity bit indication clk: st: STiH407: Support for clockgenA0 clk: st: STiH407: Support for A9 MUX Clocks clk: st: STiH407: Support for Flexgen Clocks clk: st: Adds Flexgen clock binding clk: st: Remove uncessary (void *) cast clk: st: use static const for clkgen_pll_data tables clk: st: use static const for stm_fs tables clk: st: Update ST clock binding documentation ...
| * Merge branch 'for-v3.17/ti-clk-driver' of github.com:t-kristo/linux-pm into ↵Mike Turquette2014-07-25
| |\ | | | | | | | | | clk-next-ti
| | * CLK: ti: dra7: Initialize USB_DPLLRoger Quadros2014-07-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB_DPLL must be initialized and locked at boot so that USB modules can work. Also program USB_DLL_M2 output to half rate. CC: Mike Turquette <mturquette@linaro.org> CC: Tero Kristo <t-kristo@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
* | | clk: ti: clk-7xx: Correct ABE DPLL configurationPeter Ujfalusi2014-07-31
|/ / | | | | | | | | | | | | | | | | | | | | | | ABE DPLL frequency need to be lowered from 361267200 to 180633600 to facilitate the ATL requironments. The dpll_abe_m2x2_ck clock need to be set to double of ABE DPLL rate in order to have correct clocks for audio. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* | clk: ti: set CLK_SET_RATE_NO_REPARENT for ti,mux-clockTomi Valkeinen2014-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When setting the rate of a clock, by default the clock framework will change the parent of the clock to the most suitable one in __clk_mux_determine_rate() (most suitable by looking at the clock rate). This is a rather dangerous default, and causes problems on AM43x when using display and ethernet. There are multiple ways to select the clock muxes on AM43x, and some of those clock paths have the same source clocks for display and ethernet. When changing the clock rate for the display subsystem, the clock framework decides to change the display mux from the dedicated display PLL to a shared PLL which is used by the ethernet, and then changes the rate of the shared PLL, breaking the ethernet. As I don't think there ever is a case where we want the clock framework to automatically change the parent clock of a clock mux, this patch sets the CLK_SET_RATE_NO_REPARENT for all ti,mux-clocks. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
* | clk: ti: am43x: Fix boot with CONFIG_SOC_AM33XX disabledRoger Quadros2014-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define ti_clk_register_dpll_x2() and of_ti_am3_dpll_x2_setup() if AM43XX is defined. Fixes the below boot issue. [ 2.157258] gpmc_l3_clk not enabled [ 2.161194] gpmc_l3_clk not enabled [ 2.164896] Division by zero in kernel. [ 2.169055] CPU: 0 PID: 321 Comm: kworker/u2:2 Tainted: G W 3.16.0-rc1-00008-g4c0e520 #273 [ 2.178880] Workqueue: deferwq deferred_probe_work_func [ 2.184459] [<c001477c>] (unwind_backtrace) from [<c001187c>] (show_stack+0x10/0x14) [ 2.192752] [<c001187c>] (show_stack) from [<c0530f28>] (dump_stack+0x80/0x9c) [ 2.200486] [<c0530f28>] (dump_stack) from [<c02c867c>] (Ldiv0+0x8/0x10) [ 2.207678] [<c02c867c>] (Ldiv0) from [<c0022da0>] (gpmc_calc_divider+0x24/0x40) [ 2.215490] [<c0022da0>] (gpmc_calc_divider) from [<c0022e20>] (gpmc_cs_set_timings+0x18/0x474) [ 2.224783] [<c0022e20>] (gpmc_cs_set_timings) from [<c003069c>] (gpmc_nand_init+0x74/0x1a8) [ 2.233791] [<c003069c>] (gpmc_nand_init) from [<c0024668>] (gpmc_probe+0x52c/0x874) [ 2.242089] [<c0024668>] (gpmc_probe) from [<c0349218>] (platform_drv_probe+0x18/0x48) [ 2.250534] [<c0349218>] (platform_drv_probe) from [<c0347d88>] (driver_probe_device+0x104/0x22c) [ 2.259988] [<c0347d88>] (driver_probe_device) from [<c03464dc>] (bus_for_each_drv+0x44/0x8c) [ 2.269087] [<c03464dc>] (bus_for_each_drv) from [<c0347c4c>] (device_attach+0x74/0x8c) [ 2.277620] [<c0347c4c>] (device_attach) from [<c0347380>] (bus_probe_device+0x88/0xb0) [ 2.286074] [<c0347380>] (bus_probe_device) from [<c0347768>] (deferred_probe_work_func+0x60/0x90) [ 2.295611] [<c0347768>] (deferred_probe_work_func) from [<c004ef50>] (process_one_work+0x1b4/0x4bc) [ 2.305288] [<c004ef50>] (process_one_work) from [<c004f3d4>] (worker_thread+0x148/0x550) [ 2.313954] [<c004f3d4>] (worker_thread) from [<c0055a48>] (kthread+0xc8/0xe4) [ 2.321628] [<c0055a48>] (kthread) from [<c000e648>] (ret_from_fork+0x14/0x2c) Signed-off-by: Roger Quadros <rogerq@ti.com> Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
* | clk: ti: dra7: return error code in failure caseJulia Lawall2014-06-19
| | | | | | | | | | | | | | | | | | Add a returned error code in the MAX_APLL_WAIT_TRIES case. Remove the updating of the return variable r to 0 if MAX_APLL_WAIT_TRIES is not yet reached, because r is already 0 at this point. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Tero Kristo <t-kristo@ti.com>
* | clk: ti: apll: not allocating enough dataDan Carpenter2014-06-19
|/ | | | | | | | | There is a cut and paste bug here which will lead to memory corruption because we don't allocate enough data. Fixes: 4d008589e271 ('CLK: TI: APLL: add support for omap2 aplls') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
* Merge tag 'clk-for-linus-3.16-part2' of ↵Linus Torvalds2014-06-15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/mike.turquette/linux Pull more clock framework updates from Mike Turquette: "This contains the second half the of the clk changes for 3.16. They are simply fixes and code refactoring for the OMAP clock drivers. The sunxi clock driver changes include splitting out the one mega-driver into several smaller pieces and adding support for the A31 SoC clocks" * tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux: (25 commits) clk: sunxi: document PRCM clock compatible strings clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support clk: sun6i: Protect SDRAM gating bit clk: sun6i: Protect CPU clock clk: sunxi: Rework clock protection code clk: sunxi: Move the GMAC clock to a file of its own clk: sunxi: Move the 24M oscillator to a file of its own clk: sunxi: Remove calls to clk_put clk: sunxi: document new A31 USB clock compatible clk: sunxi: Implement A31 USB clock ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing with higher frequencies CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC) CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ck CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic) dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clock CLK: TI: gate: add composite interface clock to OMAP2 only build ARM: OMAP2: clock: add DT boot support for cpufreq_ck CLK: TI: OMAP2: add clock init support ...
| * Merge branch 'for-v3.16/ti-clk-drv' of github.com:t-kristo/linux-pm into ↵Mike Turquette2014-06-10
| |\ | | | | | | | | | clk-next
| | * CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher ↵Nishanth Menon2014-06-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | frequencies MPU DPLL on OMAP5, DRA75x, DRA72x has a limitation on the maximum frequency it can be locked at. Duty Cycle Correction circuit is used to recover a correct duty cycle for achieving higher frequencies (hardware internally switches output to M3 output(CLKOUTHIF) from M2 output (CLKOUT)). So provide support to setup required data to handle Duty cycle by the setting up the minimum frequency for DPLL. 1.4GHz is common for all these devices and is based on Technical Reference Manual information for OMAP5432((SWPU282U) chapter 3.6.3.3.1 "DPLLs Output Clocks Parameters", and equivalent information from DRA75x, DRA72x documentation(SPRUHP2E, SPRUHI2P). Signed-off-by: Nishanth Menon <nm@ti.com> [t-kristo@ti.com: updated for latest dpll init API call] Signed-off-by: Tero Kristo <t-kristo@ti.com>
| | * CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ckPeter Ujfalusi2014-06-06
| | | | | | | | | | | | | | | | | | | | | | | | In order to get correct clock dividers for AESS/ABE we need to set the dpll_abe_m2x2_ck rate to be double of dpll_abe_ck. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| | * CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)Peter Ujfalusi2014-05-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Audio Tracking Logic is designed to be used by HD Radio applications to synchronize the audio output clocks to the baseband clock. ATL can be also used to track errors between two reference clocks (BWS, AWS) and generate a modulated clock output which averages to some desired frequency. In essence ATL is generating a clock to be used by an audio codec and also to be used by the SoC as MCLK. To be able to integrate the ATL provided clocks to the clock tree we need two types of DT binding: - DT clock nodes to represent the ATL clocks towards the CCF - binding for the ATL IP itself which is going to handle the hw configuration The reason for this type of setup is that ATL itself is a separate device in the SoC, it has it's own address space and clock domain. Other IPs can use the ATL generated clock as their functional clock (McASPs for example) and external components like audio codecs can also use the very same clock as their MCLK. The ATL IP in DRA7 contains 4 ATL instences. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-03-21 05:34:25 -0400