aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/char/tpm/tpm.h
Commit message (Collapse)AuthorAge
* TPM: Retry SaveState command in suspend pathDuncan Laurie2013-04-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the TPM has already been sent a SaveState command before the driver is loaded it may have problems sending that same command again later. This issue is seen with the Chromebook Pixel due to a firmware bug in the legacy mode boot path which is sending the SaveState command before booting the kernel. More information is available at http://crbug.com/203524 This change introduces a retry of the SaveState command in the suspend path in order to work around this issue. A future firmware update should fix this but this is also a trivial workaround in the driver that has no effect on systems that do not show this problem. When this does happen the TPM responds with a non-fatal TPM_RETRY code that is defined in the specification: The TPM is too busy to respond to the command immediately, but the command could be resubmitted at a later time. The TPM MAY return TPM_RETRY for any command at any time. It can take several seconds before the TPM will respond again. I measured a typical time between 3 and 4 seconds and the timeout is set at a safe 5 seconds. It is also possible to reproduce this with commands via /dev/tpm0. The bug linked above has a python script attached which can be used to test for this problem. I tested a variety of TPMs from Infineon, Nuvoton, Atmel, and STMicro but was only able to reproduce this with LPC and I2C TPMs from Infineon. The TPM specification only loosely defines this behavior: TPM Main Level 2 Part 3 v1.2 r116, section 3.3. TPM_SaveState: The TPM MAY declare all preserved values invalid in response to any command other than TPM_Init. TCG PC Client BIOS Spec 1.21 section 8.3.1. After issuing a TPM_SaveState command, the OS SHOULD NOT issue TPM commands before transitioning to S3 without issuing another TPM_SaveState command. TCG PC Client TIS 1.21, section 4. Power Management: The TPM_SaveState command allows a Static OS to indicate to the TPM that the platform may enter a low power state where the TPM will be required to enter into the D3 power state. The use of the term "may" is significant in that there is no requirement for the platform to actually enter the low power state after sending the TPM_SaveState command. The software may, in fact, send subsequent commands after sending the TPM_SaveState command. Change-Id: I52b41e826412688e5b6c8ddd3bb16409939704e9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
* tpm: Fix cancellation of TPM commands (interrupt mode)Stefan Berger2013-02-05
| | | | | | | | Support cancellation of TPM commands when driver is used in interrupt mode. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
* tpm: Fix cancellation of TPM commands (polling mode)Stefan Berger2013-02-05
| | | | | | | | | | | | | | | | On one of my machines the cancellation of TPM commands does not work. The reason is that by writing into sysfs 'cancel' the tpm_tis_ready call causes the status flag TPM_STS_VALID to be set in the statusregister. However, the TIS driver seems to wait for TPM_STS_COMMAND_READY. Once a 2nd time sysfs 'cancel' is written to, the TPM_STS_COMMAND_READY flag also gets set, resulting in TPM_STS_VALID|TPM_STS_COMMAND_READY to be read from the status register. This patch now converts req_canceled into a function to enable more complex comparisons against possible cancellation status codes. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
* tpm: Store TPM vendor IDStefan Berger2013-02-05
| | | | | | | Store the TPM vendor ID for later use. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
* tpm: rename vendor data to priv and provide an accessorKent Yoder2013-02-05
| | | | | | | | "data" was too generic a name for what's being used as a generic private pointer by vendor-specific code. Rename it to "priv" and provide a #define for users. Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
* TPM: Switch to __packed instead of __attribute__((packed))Jason Gunthorpe2013-02-05
| | | | | | | | This seems to be preferred these days. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
* TPM: Issue TPM_STARTUP at driver load if the TPM has not been startedJason Gunthorpe2013-02-05
| | | | | | | | | | | | | | The TPM will respond to TPM_GET_CAP with TPM_ERR_INVALID_POSTINIT if TPM_STARTUP has not been issued. Detect this and automatically issue TPM_STARTUP. This is for embedded applications where the kernel is the first thing to touch the TPM. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Peter Huewe <peter.huewe@infineon.com> Reviewed-by: Peter Huewe <peter.huewe@infineon.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
* driver/char/tpm: fix regression causesd by ppiGang Wei2012-10-10
| | | | | | | | | | | | | | | | | | | This patch try to fix the S3 regression https://lkml.org/lkml/2012/10/5/433, which includes below line: [ 1554.684638] sysfs: cannot create duplicate filename '/devices/pnp0/00:0c/ppi' The root cause is that ppi sysfs teardown code is MIA, so while S3 resume, the ppi kobject will be created again upon existing one. To make the tear down code simple, change the ppi subfolder creation from using kobject_create_and_add to just using a named ppi attribute_group. Then ppi sysfs teardown could be done with a simple sysfs_remove_group call. Adjusted the name & return type for ppi sysfs init function. Reported-by: Ben Guthro <ben@guthro.net> Signed-off-by: Gang Wei <gang.wei@intel.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
* driver: add PPI support in tpm driverXiaoyan Zhang2012-08-22
| | | | | | | | | | | | | | | | The Physical Presence Interface enables the OS and the BIOS to cooperate and provides a simple and straightforward platform user experience for administering the TPM without sacrificing security. V2: separate the patch out in a separate source file, add #ifdef CONFIG_ACPI so it compiles out on ppc, use standard error instead of ACPI error as return code of show/store fns. V3: move #ifdef CONFIG_ACPI from .c file to .h file. V4: move tpm_ppi code from tpm module to tpm_bios module. V5: modify sys_add_ppi() so that ppi_attr_grp doesn't need to be exported Signed-off-by: Xiaoyan Zhang <xiaoyan.zhang@intel.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
* drivers/char/tpm: Add securityfs support for event logAshley Lai2012-08-22
| | | | | | | | | This patch retrieves the event log data from the device tree during file open. The event log data will then displayed through securityfs. Signed-off-by: Ashley Lai <adlai@us.ibm.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
* drivers/char/tpm: Add new device driver to support IBM vTPMAshley Lai2012-08-22
| | | | | | | | | | | | | | | This patch adds a new device driver to support IBM virtual TPM (vTPM) for PPC64. IBM vTPM is supported through the adjunct partition with firmware release 740 or higher. With vTPM support, each lpar is able to have its own vTPM without the physical TPM hardware. This driver provides TPM functionalities by communicating with the vTPM adjunct partition through Hypervisor calls (Hcalls) and Command/Response Queue (CRQ) commands. Signed-off-by: Ashley Lai <adlai@us.ibm.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
* tpm: Move tpm_get_random api into the TPM device driverKent Yoder2012-08-22
| | | | | | | | | | | | Move the tpm_get_random api from the trusted keys code into the TPM device driver itself so that other callers can make use of it. Also, change the api slightly so that the number of bytes read is returned in the call, since the TPM command can potentially return fewer bytes than requested. Acked-by: David Safford <safford@linux.vnet.ibm.com> Reviewed-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
* PM / TPM: Drop unused pm_message_t argument from tpm_pm_suspend()Rafael J. Wysocki2012-07-10
| | | | | | | The tpm_pm_suspend()'s second argument of type pm_message_t is not used, so remove it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* tpm_tis: Only probe iTPMsStefan Berger2012-02-14
| | | | | | | | | Detect iTPMs through the vendor ID on the hardware interface and only probe the device if the manufacturer is found to be Intel. This obsoletes a previously added delay necessary for some TPMs but not iTPMs. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
* tpm: fix (ACPI S3) suspend regressionStefan Berger2012-01-18
| | | | | | | | | | | | | | | | | | | This patch fixes an (ACPI S3) suspend regression introduced in commit 68d6e6713fcb ("tpm: Introduce function to poll for result of self test") and occurring with an Infineon TPM and tpm_tis and tpm_infineon drivers active. The suspend problem occurred if the TPM was disabled and/or deactivated and therefore the TPM_PCRRead checking the result of the (asynchronous) self test returned an error code which then caused the tpm_tis driver to become inactive and this then seemed to have negatively influenced the suspend support by the tpm_infineon driver... Besides that the tpm_tis drive may stay active even if the TPM is disabled and/or deactivated. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* TPM: fix transmit_cmd error logicRajiv Andrade2011-11-16
| | | | | | | | | | It's incorrect to assume that buffers returned by the TPM 10 bytes long are always error reports. This patches parses the error field in its header instead. The error report is now being printed using dev_err() instead of dev_dbg(), making it easier for users to provide more detailed bug reports. Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
* TPM: Export wait_for_stat for other vendor specific driversRajiv Andrade2011-11-16
| | | | | | | Moved wait_for_stat to tpm.c so that other drivers can use it. Also renamed it to avoid future namespace conflicts. Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
* tpm: Introduce function to poll for result of self testStefan Berger2011-11-16
| | | | | | | | This patch introduces a function that runs the TPM_ContinueSelfTest() function and then polls the TPM to check whether it finished the selftest and can receive new commands. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
* tpm: Cleanup tpm_continue_selftestStefan Berger2011-11-16
| | | | | | Cleanup the tpm_continue_selftest function. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
* tpm: Have tpm_get_timeouts return an error codeStefan Berger2011-11-16
| | | | | | Have the tpm_get_timeouts function return an error code. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
* tpm_tis: Fix the probing for interruptsStefan Berger2011-07-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes several aspects of the probing for interrupts. This patch reads the TPM's timeouts before probing for the interrupts. The tpm_get_timeouts() function is invoked in polling mode and gets the proper timeouts from the TPM so that we don't need to fall back to 2 minutes timeouts for short duration commands while the interrupt probing is happening. This patch introduces a variable probed_irq into the vendor structure that gets the irq number if an interrupt is received while the the tpm_gen_interrupt() function is run in polling mode during interrupt probing. Previously some parts of tpm_gen_interrupt() were run in polling mode, then the irq variable was set in the interrupt handler when an interrupt was received and execution of tpm_gen_interrupt() ended up switching over to interrupt mode. tpm_gen_interrupt() execution ended up on an event queue where it eventually timed out since the probing handler doesn't wake any queues. Before calling into free_irq() clear all interrupt flags that may have been set by the TPM. The reason is that free_irq() will call into the probing interrupt handler and may otherwise fool us into thinking that a real interrupt happened (because we see the flags as being set) while the TPM's interrupt line is not even connected to anything on the motherboard. This solves a problem on one machine I did testing on (Thinkpad T60). If a TPM claims to use a specifc interrupt, the probing is done as well to verify that the interrupt is actually working. If a TPM indicates that it does not use a specific interrupt (returns '0'), probe all interrupts from 3 to 15. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
* tpm_tis: Add timeouts sysfs entryStefan Berger2011-07-12
| | | | | | | | | Display the TPM's interface timeouts in a 'timeouts' sysfs entry. Display the entries as having been adjusted when they were scaled due to their values being reported in milliseconds rather than microseconds. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
* tpm_tis: Introduce durations sysfs entryStefan Berger2011-07-12
| | | | | | | | | | Display the TPM's command timeouts in a 'durations' sysfs entry. Display the entries as having been adjusted when they were scaled due to their values being reported in milliseconds rather than microseconds. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by: Guillaume Chazarain <guichaz@gmail.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
* Revert "tpm_tis: Use timeouts returned from TPM"Linus Torvalds2011-02-20
| | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 9b29050f8f75916f974a2d231ae5d3cd59792296. It has caused hibernate regressions, for example Juri Sladby's report: "I'm unable to hibernate 2.6.37.1 unless I rmmod tpm_tis: [10974.074587] Suspending console(s) (use no_console_suspend to debug) [10974.103073] tpm_tis 00:0c: Operation Timed out [10974.103089] legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62 [10974.103095] PM: Device 00:0c failed to freeze: error -62" and Rafael points out that some of the new conditionals in that commit seem to make no sense. This commit needs more work and testing, let's revert it for now. Reported-by: Norbert Preining <preining@logic.at> Reported-and-requested-by: Jiri Slaby <jirislaby@gmail.com> Cc: Stefan Berger <stefanb@linux.vnet.ibm.com> Cc: Guillaume Chazarain <guichaz@gmail.com> Cc: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tpm_tis: Use timeouts returned from TPMStefan Berger2011-02-10
| | | | | | | | | | | | | | | The current TPM TIS driver in git discards the timeout values returned from the TPM. The check of the response packet needs to consider that the return_code field is 0 on success and the size of the expected packet is equivalent to the header size + u32 length indicator for the TPM_GetCapability() result + 3 timeout indicators of type u32. I am also adding a sysfs entry 'timeouts' showing the timeouts that are being used. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by: Guillaume Chazarain <guichaz@gmail.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
* tpm: add module_put wrapperMimi Zohar2010-11-28
| | | | | | | | | | | | | For readability, define a tpm_chip_put() wrapper to call module_put(). Replace existing module_put() calls with the wrapper. (Change based on trusted/encrypted patchset review by David Howells.) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: David Safford <safford@watson.ibm.com> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Serge E. Hallyn <serge.hallyn@canonical.com> Signed-off-by: James Morris <jmorris@namei.org>
* TPM: ReadPubEK output struct fixRajiv Andrade2010-06-14
| | | | | | | | | | | | This patch adds a missing element of the ReadPubEK command output, that prevents future overflow of this buffer when copying the TPM output result into it. Prevents a kernel panic in case the user tries to read the pubek from sysfs. Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
* TPM: integrity interfaceRajiv Andrade2009-02-02
| | | | | | | | | | This patch adds internal kernel support for: - reading/extending a pcr value - looking up the tpm_chip for a given chip number Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
* TPM: sysfs functions consolidationRajiv Andrade2009-02-02
| | | | | | | | | | | According to Dave Hansen's comments on the tpm_show_*, some of these functions present a pattern when allocating data[] memory space and also when setting its content. A new function was created so that this pattern could be consolidated. Also, replaced the data[] command vectors and its indexes by meaningful structures as pointed out by Matt Helsley too. Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
* The tpm_dev_release function is only called for platform devices, not pnpRajiv Andrade2008-10-10
| | | | | | | | | | | | | devices, so we implemented the .remove function for pnp ones. Since it's code is very similar to the one inside tpm_dev_release, we've created a helper function tpm_dev_vendor_release, which is called by both. Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Morris <jmorris@namei.org>
* Renames num_open to is_open, as only one process can open the file at a time.Rajiv Andrade2008-10-10
| | | | | | | | Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Morris <jmorris@namei.org>
* tpm.c: fix crash during device removalRichard MUSIL2008-02-06
| | | | | | | | | | | | | | | | | The clean up procedure now uses platform device "release" callback to handle memory clean up. For this purpose "release" function callback was added to struct tpm_vendor_specific, so hw device driver provider can get called when it is safe to remove all allocated resources. This is supposed to fix a bug in device removal, where device while in receive function (waiting on timeout) was prone to segfault, if the tpm_chip struct was unallocated before the timeout expired (in tpm_remove_hardware). Acked-by: Marcel Selhorst <tpm@selhorst.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tpmdd maintainersKent Yoder2007-08-22
| | | | | | | | | | | Fix up the maintainers info in the tpm drivers. Kylene will be out for some time, so copying the sourceforge list is the best way to get some attention. Cc: Marcel Selhorst <tpm@selhorst.net> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* use mutex instead of semaphore in TPM driverMatthias Kaehlcke2007-05-08
| | | | | | | | | | | The TPM driver uses two semaphores as mutexes. Use the mutex API instead of the (binary) semaphores. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Cc: Kylene Hall <kjhall@us.ibm.com> Cc: Marcel Selhorst <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PCI: Cleanup the includes of <linux/pci.h>Jean Delvare2007-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I noticed that many source files include <linux/pci.h> while they do not appear to need it. Here is an attempt to clean it all up. In order to find all possibly affected files, I searched for all files including <linux/pci.h> but without any other occurence of "pci" or "PCI". I removed the include statement from all of these, then I compiled an allmodconfig kernel on both i386 and x86_64 and fixed the false positives manually. My tests covered 66% of the affected files, so there could be false positives remaining. Untested files are: arch/alpha/kernel/err_common.c arch/alpha/kernel/err_ev6.c arch/alpha/kernel/err_ev7.c arch/ia64/sn/kernel/huberror.c arch/ia64/sn/kernel/xpnet.c arch/m68knommu/kernel/dma.c arch/mips/lib/iomap.c arch/powerpc/platforms/pseries/ras.c arch/ppc/8260_io/enet.c arch/ppc/8260_io/fcc_enet.c arch/ppc/8xx_io/enet.c arch/ppc/syslib/ppc4xx_sgdma.c arch/sh64/mach-cayman/iomap.c arch/xtensa/kernel/xtensa_ksyms.c arch/xtensa/platform-iss/setup.c drivers/i2c/busses/i2c-at91.c drivers/i2c/busses/i2c-mpc.c drivers/media/video/saa711x.c drivers/misc/hdpuftrs/hdpu_cpustate.c drivers/misc/hdpuftrs/hdpu_nexus.c drivers/net/au1000_eth.c drivers/net/fec_8xx/fec_main.c drivers/net/fec_8xx/fec_mii.c drivers/net/fs_enet/fs_enet-main.c drivers/net/fs_enet/mac-fcc.c drivers/net/fs_enet/mac-fec.c drivers/net/fs_enet/mac-scc.c drivers/net/fs_enet/mii-bitbang.c drivers/net/fs_enet/mii-fec.c drivers/net/ibm_emac/ibm_emac_core.c drivers/net/lasi_82596.c drivers/parisc/hppb.c drivers/sbus/sbus.c drivers/video/g364fb.c drivers/video/platinumfb.c drivers/video/stifb.c drivers/video/valkyriefb.c include/asm-arm/arch-ixp4xx/dma.h sound/oss/au1550_ac97.c I would welcome test reports for these files. I am fine with removing the untested files from the patch if the general opinion is that these changes aren't safe. The tested part would still be nice to have. Note that this patch depends on another header fixup patch I submitted to LKML yesterday: [PATCH] scatterlist.h needs types.h http://lkml.org/lkml/2007/3/01/141 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] severing fs.h, radix-tree.h -> sched.hAl Viro2006-12-04
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* [PATCH] tpm_register_hardware gcc 4.1 warning fixDaniel Walker2006-05-15
| | | | | | | | | | drivers/char/tpm/tpm.c: In function 'tpm_register_hardware': drivers/char/tpm/tpm.c:1157: warning: assignment from incompatible pointer type Signed-off-by: Daniel Walker <dwalker@mvista.com> Acked-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: msecs_to_jiffies cleanupsKylene Jo Hall2006-04-22
| | | | | | | | | | | | | The timeout and duration values used in the tpm driver are not exposed to userspace. This patch converts the storage units to jiffies with msecs_to_jiffies. They were always being used in jiffies so this simplifies things removing the need for calculation all over the place. The change necessitated a type change in the tpm_chip struct to hold jiffies. Signed-off-by: Kylie Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: driver for next generation TPM chipsLeendert van Doorn2006-04-22
| | | | | | | | | | | | | The driver for the next generation of TPM chips version 1.2 including support for interrupts. The Trusted Computing Group has written the TPM Interface Specification (TIS) which defines a common interface for all manufacturer's 1.2 TPM's thus the name tpm_tis. Signed-off-by: Leendert van Doorn <leendert@watson.ibm.com> Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: new 1.2 sysfs filesKylene Jo Hall2006-04-22
| | | | | | | | | | | | | | | | | Many of the sysfs files were calling the TPM_GetCapability command with array. Since for 1.2 more sysfs files of this type are coming I am generalizing the array so there can be one array and the unique parts can be filled in just before the command is called. This updated version of the patch breaks the multi-value sysfs file into separate files pointed out by Greg. It also addresses the code redundancy and ugliness in the tpm_show_* functions pointed out on another patch by Dave Hansen. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: command duration updateKylene Jo Hall2006-04-22
| | | | | | | | | | | | | | | With the TPM 1.2 Specification, each command is classified as short, medium or long and the chip tells you the maximum amount of time for a response to each class of command. This patch provides and array of the classifications and a function to determine how long the response should be waited for. Also, it uses that information in the command processing to determine how long to poll for. The function is exported so the 1.2 driver can use the functionality to determine how long to wait for a DataAvailable interrupt if interrupts are being used. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: return chip from tpm_register_hardwareKylene Jo Hall2006-04-22
| | | | | | | | | | | | | Changes in the 1.2 TPM Specification make it necessary to update some fields of the chip structure in the initialization function after it is registered with tpm.c thus tpm_register_hardware was modified to return a pointer to the structure. This patch makes that change and the associated changes in tpm_atmel and tpm_nsc. The changes to tpm_infineon will be coming in a patch from Marcel Selhorst. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: chip struct updateKylene Jo Hall2006-04-22
| | | | | | | | | | | | To assist with chip management and better support the possibility of having multiple TPMs in the system of the same kind, the struct tpm_vendor_specific member of the tpm_chip was changed from a pointer to an instance. This patch changes that declaration and fixes up all accesses to the structure member except in tpm_infineon which is coming in a patch from Marcel Selhorst. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: sparc32 build fixAndrew Morton2006-03-25
| | | | | | | | | | In file included from drivers/char/tpm/tpm_nsc.c:23: drivers/char/tpm/tpm.h: In function `tpm_read_index': drivers/char/tpm/tpm.h:92: warning: implicit declaration of function `outb' drivers/char/tpm/tpm.h:93: warning: implicit declaration of function `inb' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: add bios measurement logKylene Jo Hall2006-01-08
| | | | | | | | | | | | | | According to the TCG specifications measurements or hashes of the BIOS code and data are extended into TPM PCRS and a log is kept in an ACPI table of these extensions for later validation if desired. This patch exports the values in the ACPI table through a security-fs seq_file. Signed-off-by: Seiji Munetoh <munetoh@jp.ibm.com> Signed-off-by: Stefan Berger <stefanb@us.ibm.com> Signed-off-by: Reiner Sailer <sailer@us.ibm.com> Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: locking fixKylene Jo Hall2005-11-13
| | | | | | | | Use schedule_work() to avoid down()-in-timer-handler problem. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: updates for new hardwareKylene Jo Hall2005-11-13
| | | | | | | | | | This is the patch to support TPMs on power ppc hardware. It has been reworked as requested to remove the need for messing with the io page mask by just using ioremap. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reasonOlaf Hering2005-11-09
| | | | | | | | | | | | | | | | | | | | | This patch removes almost all inclusions of linux/version.h. The 3 #defines are unused in most of the touched files. A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is unfortunatly in linux/version.h. There are also lots of #ifdef for long obsolete kernels, this was not touched. In a few places, the linux/version.h include was move to where the LINUX_VERSION_CODE was used. quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'` search pattern: /UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] missing platform_device.h includesAl Viro2005-11-02
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: change from pci_dev to dev power management functionsKylene Jo Hall2005-10-30
| | | | | | | | | | This patch is in support of moving away from the lpc bus pci_dev. The power management prototypes used by platform drivers is different but the functionality remains the same. Signed-off-by: Kylene Hall <kjhall@us.ibm.com Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-21 20:48:55 -0500