aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/base
Commit message (Collapse)AuthorAge
* devres: device resource managementTejun Heo2007-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement device resource management, in short, devres. A device driver can allocate arbirary size of devres data which is associated with a release function. On driver detach, release function is invoked on the devres data, then, devres data is freed. devreses are typed by associated release functions. Some devreses are better represented by single instance of the type while others need multiple instances sharing the same release function. Both usages are supported. devreses can be grouped using devres group such that a device driver can easily release acquired resources halfway through initialization or selectively release resources (e.g. resources for port 1 out of 4 ports). This patch adds devres core including documentation and the following managed interfaces. * alloc/free : devm_kzalloc(), devm_kzfree() * IO region : devm_request_region(), devm_release_region() * IRQ : devm_request_irq(), devm_free_irq() * DMA : dmam_alloc_coherent(), dmam_free_coherent(), dmam_declare_coherent_memory(), dmam_pool_create(), dmam_pool_destroy() * PCI : pcim_enable_device(), pcim_pin_device(), pci_is_managed() * iomap : devm_ioport_map(), devm_ioport_unmap(), devm_ioremap(), devm_ioremap_nocache(), devm_iounmap(), pcim_iomap_table(), pcim_iomap(), pcim_iounmap() Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Driver Core: Increase the default timeout value of the firmware subsystemDave Jones2007-02-07
| | | | | | | | | | | | https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=174589 The ipw driver sometimes takes a long time to load its firmware. Whilst the ipw driver should be using the async interface of the firmware loader to make this a non-issue, this is a minimal fix. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: allow to delay the uevent at device creation timeKay Sievers2007-02-07
| | | | | | | | | | For the block subsystem, we want to delay all uevents until the disk has been scanned and allpartitons are already created before the first event is sent out. Signed-off-by: Kay Sievers <kay.sievers@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: add device_type to struct deviceKay Sievers2007-02-07
| | | | | | | | | | | | | | | | | | | This allows us to add type specific attributes, uevent vars and release funtions. A subsystem can carry different types of devices like the "block" subsys has disks and partitions. Both types create a different set of attributes, but belong to the same subsystem. This corresponds to the low level objects: kobject -> device (object/device data) kobj_type -> device_type (type of object/device we are embedded in) kset -> class/bus (list of objects/devices of a subsystem) Signed-off-by: Kay Sievers <kay.sievers@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: add uevent vars for devices of a classKay Sievers2007-02-07
| | | | | | | | | | | Devices converted from class_device to device should have the same uevent keys as the original class_device had. We search up the parents until we find the first bus device and add the (already deprecated) PHYDEV* values. Signed-off-by: Kay Sievers <kay.sievers@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: Change function call order in device_bind_driver().Cornelia Huck2007-02-07
| | | | | | | | | | | Change function call order in device_bind_driver(). If we create symlinks (which might fail) before adding the device to the list we don't have to clean up afterwards (which we didn't). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: Don't stop probing on ->probe errors.Cornelia Huck2007-02-07
| | | | | | | | | | | | Don't stop on the first ->probe error that is not -ENODEV/-ENXIO. There might be a driver registered returning an unresonable return code, and this stops probing completely even though it may make sense to try the next possible driver. At worst, we may end up with an unbound device. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core fixes: device_register() retval check in platform.cCornelia Huck2007-02-07
| | | | | | | | Check the return value of device_register() in platform_bus_init(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core fixes: make_class_name() retval checksCornelia Huck2007-02-07
| | | | | | | | | Make make_class_name() return NULL on error and fixup callers in the driver core. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: Allow device_move(dev, NULL).Cornelia Huck2007-02-07
| | | | | | | | | | | | | | | | If we allow NULL as the new parent in device_move(), we need to make sure that the device is placed into the same place as it would if it was newly registered: - Consider the device virtual tree. In order to be able to reuse code, setup_parent() has been tweaked a bit. - kobject_move() can fall back to the kset's kobject. - sysfs_move_dir() uses the sysfs root dir as fallback. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: Remove device_is_registered() in device_move().Cornelia Huck2007-02-07
| | | | | | | | | | | device_is_registered() will always be false for a device with no bus. Remove this check and trust the caller to know what they're doing. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] fix kernel-doc warnings in 2.6.20-rc1Randy Dunlap2006-12-22
| | | | | | | | Fix kernel-doc warnings in 2.6.20-rc1. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Driver core: Make platform_device_add_data accept a const pointerScott Wood2006-12-13
| | | | | | | | | | | | platform_device_add_data() makes a copy of the data that is given to it, and thus the parameter can be const. This removes a warning when data from get_property() on powerpc is handed to platform_device_add_data(), as get_property() returns a const pointer. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: "platform_driver_probe() can save codespace": save codespaceAndrew Morton2006-12-13
| | | | | | | | | | | This function can be __init Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: delete virtual directory on class_unregister()Akinobu Mita2006-12-13
| | | | | | | | | Class virtual directory is created as the need arises. But it is not deleted when the class is unregistered. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] getting rid of all casts of k[cmz]alloc() callsRobert P. J. Day2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds2006-12-07
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (156 commits) [PATCH] x86-64: Export smp_call_function_single [PATCH] i386: Clean up smp_tune_scheduling() [PATCH] unwinder: move .eh_frame to RODATA [PATCH] unwinder: fully support linker generated .eh_frame_hdr section [PATCH] x86-64: don't use set_irq_regs() [PATCH] x86-64: check vector in setup_ioapic_dest to verify if need setup_IO_APIC_irq [PATCH] x86-64: Make ix86 default to HIGHMEM4G instead of NOHIGHMEM [PATCH] i386: replace kmalloc+memset with kzalloc [PATCH] x86-64: remove remaining pc98 code [PATCH] x86-64: remove unused variable [PATCH] x86-64: Fix constraints in atomic_add_return() [PATCH] x86-64: fix asm constraints in i386 atomic_add_return [PATCH] x86-64: Correct documentation for bzImage protocol v2.05 [PATCH] x86-64: replace kmalloc+memset with kzalloc in MTRR code [PATCH] x86-64: Fix numaq build error [PATCH] x86-64: include/asm-x86_64/cpufeature.h isn't a userspace header [PATCH] unwinder: Add debugging output to the Dwarf2 unwinder [PATCH] x86-64: Clarify error message in GART code [PATCH] x86-64: Fix interrupt race in idle callback (3rd try) [PATCH] x86-64: Remove unwind stack pointer alignment forcing again ... Fixed conflict in include/linux/uaccess.h manually Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * [PATCH] i386: change the 'no_control' field to 'hotpluggable' in the struct cpuSiddha, Suresh B2006-12-06
| | | | | | | | | | | | | | | | | | | | | | Change the 'no_control' field in the cpu struct to a more positive and better term 'hotpluggable'. And change(/cleanup) the logic accordingly. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: "Li, Shaohua" <shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
* | [PATCH] hotplug CPU: clean up hotcpu_notifier() useIngo Molnar2006-12-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There was lots of #ifdef noise in the kernel due to hotcpu_notifier(fn, prio) not correctly marking 'fn' as used in the !HOTPLUG_CPU case, and thus generating compiler warnings of unused symbols, hence forcing people to add #ifdefs. the compiler can skip truly unused functions just fine: text data bss dec hex filename 1624412 728710 3674856 6027978 5bfaca vmlinux.before 1624412 728710 3674856 6027978 5bfaca vmlinux.after [akpm@osdl.org: topology.c fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] driver/base/memory.c: handle errors properlyAndrew Morton2006-12-07
| | | | | | | | | | | | | | | | | | Do proper error-checking and propagation in drivers/base/memory.c, hence fix __must_check warnings. Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] slab: remove SLAB_KERNELChristoph Lameter2006-12-07
| | | | | | | | | | | | | | | | SLAB_KERNEL is an alias of GFP_KERNEL. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] slab: remove SLAB_ATOMICChristoph Lameter2006-12-07
| | | | | | | | | | | | | | | | SLAB_ATOMIC is an alias of GFP_ATOMIC Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] add numa node information to struct deviceChristoph Hellwig2006-12-07
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | For node-aware skb allocations we need information about the node in struct net_device or struct device. Davem suggested to put it into struct device which this patch does. In particular: - struct device gets a new int numa_node member if CONFIG_NUMA is set - there are two new helpers, dev_to_node and set_dev_node to transparently deal with the non-numa case - for pci devices the node-info is set to the value we get from pcibus_to_node. Note that for some architectures pcibus_to_node doesn't work yet at the time we call it currently. This is harmless and will just mean skb allocations aren't node-local on this architectures until the implementation of pcibus_to_node on these architectures have been updated (There are patches for x86 and x86_64 floating around) [akpm@osdl.org: cleanup] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] severing module.h->sched.hAl Viro2006-12-04
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* Driver core: platform_driver_probe(), can save codespaceDavid Brownell2006-12-01
| | | | | | | | | | | | | | | | | | This defines a new platform_driver_probe() method allowing the driver's probe() method, and its support code+data, to safely live in __init sections for typical system configurations. Many system-on-chip processors could benefit from this API, to the tune of recovering hundreds to thousands of bytes per driver. That's memory which is currently wasted holding code which can never be called after system startup, yet can not be removed. It can't be removed because of the linkage requirement that pointers to init section code (like, ideally, probe support) must not live in other sections (like driver method tables) after those pointers would be invalid. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: Use klist_remove() in device_move()Cornelia Huck2006-12-01
| | | | | | | | | | As pointed out by Alan Stern, device_move needs to use klist_remove which waits until removal is complete. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: Introduce device_move(): move a device to a new parent.Cornelia Huck2006-12-01
| | | | | | | | | | | | | | | Provide a function device_move() to move a device to a new parent device. Add auxilliary functions kobject_move() and sysfs_move_dir(). kobject_move() generates a new uevent of type KOBJ_MOVE, containing the previous path (DEVPATH_OLD) in addition to the usual values. For this, a new interface kobject_uevent_env() is created that allows to add further environmental data to the uevent at the kobject layer. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: make drivers/base/core.c:setup_parent() staticAdrian Bunk2006-12-01
| | | | | | | | This patch makes the needlessly global setup_parent() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: Introduce device_find_child().Cornelia Huck2006-12-01
| | | | | | | | Introduce device_find_child() to match device_for_each_child(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* cpu topology: consider sysfs_create_group return valueHeiko Carstens2006-12-01
| | | | | | | | | | | | | | | | | | | | | | Take return value of sysfs_create_group() into account. That function got called in case of CPU_ONLINE notification. Since callbacks are not allowed to fail on CPU_ONLINE notification do the sysfs group creation on CPU_UP_PREPARE notification. Also remember if creation succeeded in a bitmask. So it's possible to know whether it's legal to call sysfs_remove_group or not. In addition some other minor stuff: - since CPU_UP_PREPARE might fail add CPU_UP_CANCELED handling as well. - use hotcpu_notifier instead of register_hotcpu_notifier. - #ifdef code that isn't needed in the !CONFIG_HOTPLUG_CPU case. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: Call platform_notify_remove laterBenjamin Herrenschmidt2006-12-01
| | | | | | | | | | | | | | Move the call to platform_notify_remove() to after the call to bus_remove_device(), where it belongs. It's bogus to notify the platform of removal while drivers are still attached to the device and possibly still operating since the platform might use this callback to tear down some resources used by the driver (ACPI bits, iommu table, ...) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: convert firmware code to use struct deviceGreg Kroah-Hartman2006-12-01
| | | | | | | | | Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* CONFIG_SYSFS_DEPRECATED - class symlinksKay Sievers2006-12-01
| | | | | | | | Turn off class symlinks CONFIG_SYSFS_DEPRECATED is enabled. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* CONFIG_SYSFS_DEPRECATED - PHYSDEV* uevent variablesKay Sievers2006-12-01
| | | | | | | | | Disable the PHYSDEV* uevent variables if CONFIG_SYSFS_DEPRECATED is enabled. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* CONFIG_SYSFS_DEPRECATED - device symlinksKay Sievers2006-12-01
| | | | | | | | Turn off device symlinks CONFIG_SYSFS_DEPRECATED is enabled. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* CONFIG_SYSFS_DEPRECATED - bus symlinksKay Sievers2006-12-01
| | | | | | | | Turn off the bus symlinks if CONFIG_SYSFS_DEPRECATED is enabled Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: make old versions of udev work properlyGreg Kroah-Hartman2006-12-01
| | | | | | | | | If CONFIG_SYSFS_DEPRECATED is enabled, old versions of udev will work properly with devices that are associated with a class. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver Core: Move virtual_device_parent() to core.cGreg Kroah-Hartman2006-12-01
| | | | | | | | | It doesn't need to be global or in device.h Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: fix "driver" symlink timingKay Sievers2006-12-01
| | | | | | | | | | | Create the "driver" link before the child device may be created by the probing logic. This makes it possible for userspace (udev), to determine the driver property of the parent device, at the time the child device is created. Signed-off-by: Kay Sievers <kay.sievers@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: add notification of bus eventsBenjamin Herrenschmidt2006-12-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I finally did as you suggested and added the notifier to the struct bus_type itself. There are still problems to be expected is something attaches to a bus type where the code can hook in different struct device sub-classes (which is imho a big bogosity but I won't even try to argue that case now) but it will solve nicely a number of issues I've had so far. That also means that clients interested in registering for such notifications have to do it before devices are added and after bus types are registered. Fortunately, most bus types that matter for the various usage scenarios I have in mind are registerd at postcore_initcall time, which means I have a really nice spot at arch_initcall time to add my notifiers. There are 4 notifications provided. Device being added (before hooked to the bus) and removed (failure of previous case or after being unhooked from the bus), along with driver being bound to a device and about to be unbound. The usage I have for these are: - The 2 first ones are used to maintain a struct device_ext that is hooked to struct device.firmware_data. This structure contains for now a pointer to the Open Firmware node related to the device (if any), the NUMA node ID (for quick access to it) and the DMA operations pointers & iommu table instance for DMA to/from this device. For bus types I own (like IBM VIO or EBUS), I just maintain that structure directly from the bus code when creating the devices. But for bus types managed by generic code like PCI or platform (actually, of_platform which is a variation of platform linked to Open Firmware device-tree), I need this notifier. - The other two ones have a completely different usage scenario. I have cases where multiple devices and their drivers depend on each other. For example, the IBM EMAC network driver needs to attach to a MAL DMA engine which is a separate device, and a PHY interface which is also a separate device. They are all of_platform_device's (well, about to be with my upcoming patches) but there is no say in what precise order the core will "probe" them and instanciate the various modules. The solution I found for that is to have the drivers for emac to use multithread_probe, and wait for a driver to be bound to the target MAL and PHY control devices (the device-tree contains reference to the MAL and PHY interface nodes, which I can then match to of_platform_devices). Right now, I've been polling, but with that notifier, I can more cleanly wait (with a timeout of course). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] Fix device_attribute memory leak in device_delCatalin Marinas2006-11-25
| | | | | | | | | | dev->devt_attr is allocated in device_add() but it is never freed in device_del() in the drivers/base/core.c file (reported by kmemleak). Signed-off-by: Catalin Marinas <catalin.marinas@gmail.com> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] move SYS_HYPERVISOR inside the Generic Driver menuRandy Dunlap2006-10-28
| | | | | | | | | | | | | Put SYS_HYPERVISOR inside the Generic Driver Config menu where it should be. Otherwise xconfig displays it as a dangling (lost) menu item under Device Drivers, all by itself (when all options are displayed). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: <holzheu@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] drivers: wait for threaded probes between initcall levelsAndrew Morton2006-10-27
| | | | | | | | | | | | | | | | | | The multithreaded-probing code has a problem: after one initcall level (eg, core_initcall) has been processed, we will then start processing the next level (postcore_initcall) while the kernel threads which are handling core_initcall are still executing. This breaks the guarantees which the layered initcalls previously gave us. IOW, we want to be multithreaded _within_ an initcall level, but not between different levels. Fix that up by causing the probing code to wait for all outstanding probes at one level to complete before we start processing the next level. Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* driver core: kmalloc() failure check in driver_probe_deviceAkinobu Mita2006-10-18
| | | | | | | | driver_probe_device() is missing kmalloc() failure check. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: bus: remove indentation levelJeff Garzik2006-10-18
| | | | | | | | | | | | Before potentially fixing up these functions, this cosmetic change reduces the indentation level to make the code easier to read and maintain. No functional changes at all. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: Don't ignore error returns from probingAlan Stern2006-10-18
| | | | | | | | | | | | | This patch (as797) fixes device_add() in the driver core. It needs to pay attention when the driver for a new device reports an error. At the same time, since bus_remove_device() undoes the effects of both bus_add_device() and bus_attach_device(), it needs to check whether the bus_attach_device step failed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: Don't leak 'old_class_name' in drivers/base/core.c::device_rename()Jesper Juhl2006-10-18
| | | | | | | | | | | | If kmalloc() fails to allocate space for 'old_symlink_name' in drivers/base/core.c::device_rename(), then we'll leak 'old_class_name'. Spotted by the Coverity checker. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core fixes: sysfs_create_group() retval in topology.cCornelia Huck2006-10-18
| | | | | | | | | Return the return value of sysfs_create_group() in topology_add_dev(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core fixes: device_create_file() retval check in dmapool.cCornelia Huck2006-10-18
| | | | | | | | Check for device_create_file() return value in dma_pool_create(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core fixes: device_add() cleanup on errorCornelia Huck2006-10-18
| | | | | | | | | | Check for return code of device_create_file() and correct cleanup in the error case in device_add(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-29 16:36:37 -0500