aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ata
Commit message (Collapse)AuthorAge
* [libata] sata_mv: print out additional chip info during probeJeff Garzik2007-07-09
| | | | | | | Indicate whether this is a Generation-I (50xx), Generation-II (60xx), or Generation-II-E (6042/7042) chip. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] Use ATA_UDMAx standard masks when filling driver's udma_mask infoJeff Garzik2007-07-09
| | | | | | | | | The ATA_UDMAx masks are self-documenting, and far better than manually writing in the hex mask. Note that pata_it8213 mask differed from the comment. Added a FIXME there. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145)Jeff Garzik2007-07-09
| | | | | | | | | | | | | Add support for the SATA portion of Marvell's AHCI-compatible chips. The PATA port capability, also available via AHCI, is disabled until support is completed. NCQ and PCI MSI are disabled by default. Marvell says "we use NCQ" in their drivers but "we do not use PCI MSI." Theoretically that implies we need to fix ahci.c to work with Marvell NCQ, but one wonders why Marvell NCQ is any different from other AHCI chips. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] Clean up driver udma_mask initializersJeff Garzik2007-07-09
| | | | | | | | * Use ATA_UDMA* * Remove FIXME notations that once served to remind us to verify that these were indeed the correct UDMA masks. They are. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: Support chips with 64K PRD quirkAlan Cox2007-07-09
| | | | | | | | | Add ata_dumb_qc_prep and supporting logic so that a driver can just specify it needs to be helped in this area. 64K entries are split as with drivers/ide. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Add a PCI ID for santa rosa's PATA controller.Christian Lamparter2007-07-09
| | | | | Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_sil24: sil24_interrupt() micro-optimisationMikael Pettersson2007-07-09
| | | | | | | | | | | | | | | sil24_interrupt() loads host->ports[i] into a local variable, validates it, and then loads the value again in the call to sil24_host_intr(). This patch replaces the second load by a reference to the local variable. This is safe since no side-effects have occurred since the initial load. It also improves readability since it makes it clear that the parameter to sil24_host_intr() is the same value which was just validated. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Add irq_flags to struct pata_platform_infoSonic Zhang2007-07-09
| | | | | | | | | | | On some embedded platforms, such as blackfin, the gpio interrupt for IDE interface is designed to be triggered with high voltage. The gpio port should be configured properly by set_irq_type() when register the irq. This patch enable the generic pata platform driver to accept platform irq flags data. Signed-off-by: Sonic Zhang <sonic.adi@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_promise: cleanupsMikael Pettersson2007-07-09
| | | | | | | | | | | | | | | | | | This patch applies some trivial cleanups to sata_promise: - repair whitespace damage - correct comment at board_2057x_pata definition - pull SATAII TX4 support code out to separate functions - rename ata_nr to ata_no for consistency with libata's port_no - remove some init-time debug printks (requested by Jeff) This patch should cause no behavioural changes, except for the removed printks. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> -- drivers/ata/sata_promise.c | 56 ++++++++++++++++++--------------------------- 1 files changed, 23 insertions(+), 33 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] pata_ixp4xx: kill unused varJeff Garzik2007-07-09
| | | | | | Reported by Michael-Luke Jones. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata_piix: fix pio/mwdma programmingTejun Heo2007-07-09
| | | | | | | | | | | | | | | | Fix various bugs in pio/mwdma mode programming. * Control bits in the timing register wasn't cleared properly while programming PIO mode. * MWDMA mode programming cleared the wrong part of control bits. * MWDMA mode programming cleared udma_mask even when the controller doesn't support UDMA. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Art Haas <ahaas@airmail.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] ahci: minor internal cleanupsJeff Garzik2007-07-09
| | | | | | | Minor cleanups, in preparation for merging Marvell PATA AHCI support in the future. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] sata_sx4, sata_via: minor documentation updatesJeff Garzik2007-07-09
| | | | | | | | | | | sata_sx4: - describe overall driver theory of operation - add a few constants that will be used in the future sata_via: - remove mention of an old-EH function that is going away Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] ahci: minor internal cleanupsJeff Garzik2007-07-09
| | | | | | Function renaming and factorization. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] ahci: Factor out SATA port init into a separate functionJeff Garzik2007-07-09
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] pata_sil680: minor cleanups from benhJeff Garzik2007-07-09
| | | | | | | | Merge unrelated cleanups (__devinit, dev_dbg, hardware constant) from changeset "pata_sil680: Add MMIO support" authored by Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] sata_sx4: named constant cleanupJeff Garzik2007-07-09
| | | | | | | | * convert tabs to spaces * convert some hex numbers to (1 << n) preferred format * document i2c and timer control register bits Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] pata_ixp4xx: convert to new EHAlessandro Zummo2007-07-09
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] pdc_adma: Reorder initializers with a couple structsJeff Garzik2007-07-09
| | | | | | | | Make it easier to verify which struct initializers are present, by presenting them in the order in which they are defined in the API header. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] drivers: remove 'void __iomem *' casts from pre-iomap daysJeff Garzik2007-07-09
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] PATA drivers: remove ATA_FLAG_SRSTJeff Garzik2007-07-09
| | | | | | | This flag only has meaning in old-EH drivers, and these drivers have already been converted to the new EH. Remove. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] sata_sil: register table cleanupJeff Garzik2007-07-09
| | | | | | | | Make the register offset table more maintainable. From the 'sii-lbt' branch, which enables the LBT chip feature. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* use_clustering (sht) bit set to 0 in AHCI ?Jens Axboe2007-07-09
| | | | | | | | | | ahci: enable sg segment clustering The specification states that ahci supports segments up to 4MiB in size, so enable clustering. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: replace ap->cbl tests with ATA_FLAG_SATA testsTejun Heo2007-07-09
| | | | | | | | | | | ap->cbl == ATA_CBL_SATA indicates SATA cable while ap->flags & ATA_FLAG_SATA indicates SATA host port. Till now they always gave the same result but SATA/PATA bridge handling will change that. Switch to ATA_FLAG_SATA test if we're testing for host port type. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] pata_atiixp: add SB700 PCI IDJeff Garzik2007-07-09
| | | | | | From AMD. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-acpi: implement _GTM/_STM supportTejun Heo2007-07-09
| | | | | | | | | | | | | | | | | Implement _GTM/_STM support. acpi_gtm is added to ata_port which stores _GTM parameters over suspend/resume cycle. A new hook ata_acpi_on_suspend() is responsible for storing _GTM parameters during suspend. _STM is executed in ata_acpi_on_resume(). With this change, invoking _GTF is safe on IDE hierarchy and acpi_sata check before _GTF is removed. ata_acpi_gtm() and ata_acpi_stm() implementation is taken from Alan Cox's pata_acpi implementation. ata_acpi_gtm() is fixed such that the result parameter is not shifted by sizeof(union acpi_object). Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-acpi: remove redundant checksTejun Heo2007-07-09
| | | | | | | Remove remaining unnecessary feature and status checks. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: reimplement ACPI invocationTejun Heo2007-07-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reimplements ACPI invocation such that, instead of exporting ACPI details to the rest of libata, ACPI event handlers - ata_acpi_on_resume() and ata_acpi_on_devcfg() - are used. These two functions are responsible for determining whether specific ACPI method is used and when. On resume, _GTF is scheduled by setting ATA_DFLAG_ACPI_PENDING device flag. This is done this way to avoid performing the action on wrong device device (device swapping while suspended). On every ata_dev_configure(), ata_acpi_on_devcfg() is called, which performs _SDD and _GTF. _GTF is performed only after resuming and, if SATA, hardreset as the ACPI spec specifies. As _GTF may contain arbitrary commands, IDENTIFY page is re-read after _GTF taskfiles are executed. If one of ACPI methods fails, ata_acpi_on_devcfg() retries on the first failure. If it fails again on the second try, ACPI is disabled on the device. Note that successful configuration clears ACPI failed status. With all feature checks moved to the above two functions, do_drive_set_taskfiles() is trivial and thus collapsed into ata_acpi_exec_tfs(), which is now static and converted to return the number of executed taskfiles to be used by ata_acpi_on_resume(). As failures are handled properly, ata_acpi_push_id() now returns -errno on errors instead of unconditional zero. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-acpi: miscellaneous cleanupsTejun Heo2007-07-09
| | | | | | | | | | | | * Add missing LOCKING: and RETURNS: to function comment. * Don't conditionalize warning messages with ata_msg_probe(). Print directly with KERN_WARNING. * Drop duplicate debug messages. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-acpi: clean up ata_acpi_exec_tfs()Tejun Heo2007-07-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch cleans up ata_acpi_exec_tfs() and its friends. * Rename taskfile_array to ata_acpi_gtf and make it __packed as it's used as argument to ACPI method, and use pointer to ata_acpi_gtf and number of taskfiles to represent _GTF taskfiles instead of a pointer casted into unsigned long and byte count. This makes argument re-checking in do_drive_set_taskfiles() unnecessary. * Pointer in void * not in unsigned long. * Clean up do_drive_get_GTF() error handling and make do_drive_get_GTF() return number of taskfiles on success, 0 if _GTF doesn't exist or doesn't contain valid ata. -errno on other errors. * Remove superflous check for acpi->buffer.pointer. * Update taskfile_load_raw() such that printed messages look similar to the messages printed by ata_eh_report(). * s/do_drive_get_GTF/ata_dev_get_GTF/ s/do_drive_set_taskfiles/ata_dev_set_taskfiles/ Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-acpi: implement ata_acpi_associate()Tejun Heo2007-07-09
| | | | | | | | | | | | | | | | | | * Add acpi_handle to ata_host and ata_port. Rename ata_device->obj_handle to ->acpi_handle and move it above such that it doesn't get cleared on reconfiguration. * Replace ACPI node association which ata_acpi_associate() which is called once during host initialization. Unlike the previous implementation, ata_acpi_associate() uses ATA_FLAG_ACPI_SATA to choose between IDE or SATA ACPI hierarchy and uses simple child look up instead of recursive walk to match the nodes. This is way safer and simpler. Please read the following message for more info. http://article.gmane.org/gmane.linux.ide/17554 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_pcmcia: Switch to ata_sff_port_startAlan Cox2007-07-03
| | | | | | | | | PCMCIA doesn't use DMA and as this driver is used on many platforms we don't want it to fail on those that define the DMA alloc API as a NULL return Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_pdc202xx_old: Correct cable detect logicAlan Cox2007-07-03
| | | | | | | We got it backwards and now the other detects are fixed it shows up Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata_generic: Check the right register for the DMA enabled flagsAlan Cox2007-07-03
| | | | | | | Mirrors change in IT821X Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_ali: fix UDMA settingsChuck Ebbert2007-07-03
| | | | | | | | | This patch was found to fix some of the problems with the pata_ali driver. https://bugzilla.redhat.com/bugzilla/attachment.cgi?id=156482 Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_mv: PCI-ID for Adaptec 1430SA SATA ControllerFlorian Attenberger2007-07-03
| | | | | Signed-off-by: Florian Attenberger <valdyn@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: fix assigned IRQ reportingTejun Heo2007-07-03
| | | | | | | | | | | | | | host->irq and host->irq2 should be set before ata_host_register() for IRQ reporting to work. Move up host->irq assignment in ata_host_activate() and add it to ata_pci_init_one() native path and pata_cs5520. The port info printing in ata_host_register() doesn't fit all the different controllers. It should probably be moved out to LLDs with some helpers in the future. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] sata_nv: undo merge errorJeff Garzik2007-07-02
| | | | | | Only the ADMA entry was supposed to be able to change queue depth. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: PATA-mode fixes for sis_sataUwe Koziolek2007-07-02
| | | | | | | | | | | | | | | | Changed PATA handler for PATA-ports used by sata_sis. This patch was originally submitted by Jeff Garzik. Added PCI-ID 1180 for SiS966 Controller in pata_sis. The 1180 mode is fully compatible to other SiS PATA-controller. The PCI-ID 1183 is SATA in PATA-emulation, but not fully compatible to SiS5513/5518. sata_sis.c is forwarding this ID to pata_sis. 1183 is not working if simply added to pata_sis. This handling fixes issues with SiS968. Signed-off-by: Uwe Koziolek <uwe.koziolek@gmx.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: add HTS541616J9SA00 to NCQ blacklistTejun Heo2007-07-02
| | | | | | | | Another member of HTS5416* family doing spurious NCQ completion. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Enrico Sardi <enricoss@tiscali.it> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_nv: allow changing queue depthRobert Hancock2007-07-02
| | | | | | | | | The sata_nv driver was missing the change_queue_depth hook in the SCSI host template which the other NCQ-capable libata drivers had. This made it impossible to change the queue depth by user request. Add this in. Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_inic162x: disable LBA48 devicesTejun Heo2007-07-02
| | | | | | | | | sata_inic162x can't do LBA48 properly yet and is likely to corrupt data on drives larger than LBA28 limit. Disable LBA48 devices during device configuration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: remove reading alt_status from ata_hsm_qc_complete()Albert Lee2007-07-02
| | | | | | | | In ata_hsm_qc_complete(): Calling ata_altstatus() after the qc is completed might race with next qc. Remove it. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: pata_pdc2027x PLL input clock fixAlbert Lee2007-07-02
| | | | | | | | | | | | | | | Recently the PLL input clock of pata_pdc2027x is sometimes detected higer than expected (e.g. 20.027 MHz compared to 16.714 MHz). It seems sometimes the mdelay() function is not as precise as it used to be. Per Alan's advice, HT or power management might affect the precision of mdelay(). This patch calls gettimeofday() to mesure the time elapsed and calculate the PLL input clock accordingly. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* scsi disk help file is not completeRandy Dunlap2007-07-02
| | | | | | | | | | | | | | | | | | | | | | | On Mon, 11 Jun 2007 20:28:16 +0200 api wrote: > Good day, > When doing make menuconfig one comes across CONFIG_BLK_DEV_SD. > The help file states that this is for scsi disks.NO MENTION IS MADE THAT > IT IS NEEDE FOR SATA DISKS AS WELL! > Would have saved me a lot of time if the help was up to date. > I hope this can be changed so others can make a kernel for sata systems > quicker. From: Randy Dunlap <randy.dunlap@oracle.com> Add help info for BLK_DEV_SD referring to its use in SATA or PATA driver configurations. Add help text for "ATA" indicating that it probably needs some SCSI config symbols enabled in order to be useful. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: kill ATA_HORKAGE_DMA_RW_ONLYTejun Heo2007-06-27
| | | | | | | | | | ATA_HORKAGE_DMA_RW_ONLY for TORiSAN is verified to be subset of using DMA for ATAPI commands which aren't aligned to 16 bytes. As libata now doesn't use DMA for unaligned ATAPI commands, the horkage is redundant. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: use PIO for non-16 byte aligned ATAPI commandsTejun Heo2007-06-27
| | | | | | | | | | | | | | | | | | | | | | | The IDE driver used DMA for ATAPI commands if READ/WRITE command is multiple of sector size or sg command is multiple of 16 bytes. For libata, READ/WRITE sector alignment is guaranteed by the high level driver (sr), so we only have to worry about the 16 byte alignment. This patch makes ata_check_atapi_dma() always request PIO for all data transfer commands which are not multiple of 16 bytes. The following reports are related to this problem. http://bugzilla.kernel.org/show_bug.cgi?id=8605 (confirmed) http://thread.gmane.org/gmane.linux.kernel/476620 (confirmed) https://bugzilla.novell.com/show_bug.cgi?id=229260 (probably) Albert first pointed out the difference between IDE and libata. Kudos to him. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: call ata_check_atapi_dma() with qc better preparedTejun Heo2007-06-27
| | | | | | | | | | In atapi_xlat(), prepare qc better before calling ata_check_atapi_dma() such that ata_check_atapi_dma() can use info from qc. While at it, reformat weird looking if/else block in the function. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: fix infinite EH waiting bugTejun Heo2007-06-27
| | | | | | | | | | When EH gives up after repeated exceptions, it doesn't't clear the PENDING bit on exit which leaves PENDING bit set without EH actually scheduled. This makes ata_port_wait_eh() to wait forever makes rmmod hang on such port. Fix it by clearing the flag. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: fix ata_dev_disable()Tejun Heo2007-06-27
| | | | | | | Fix silly condition check bug in ata_dev_disable(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-11 21:03:51 -0500