aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ata
Commit message (Collapse)AuthorAge
* libata: Don't fail device revalidation for bad _GTF methodsMatthew Garrett2007-11-10
| | | | | | | | Experience suggests that the _GTF method may be bad. We currently fail device revalidation in that case, which seems excessive. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: port and host should be stopped before hardware resources are releasedTejun Heo2007-11-08
| | | | | | | | | | | | | | | | | Port / host stop calls used to be made from ata_host_release() which is called after all hardware resources acquired after host allocation are released. This is wrong as port and host stop routines often access the hardware. Add separate devres for port / host stop which is invoked right after IRQ is released but with all other hardware resources intact. The devres is added iff ->host_stop and/or ->port_stop exist. This problem has been spotted by Mark Lord. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <liml@rtr.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: skip 0xff polling for PATA controllersTejun Heo2007-11-08
| | | | | | | | | | | | | | | In a presentation of true workmanship, pata_ali asserts IRQ permanantly if the TF status register is read more than once when there's no device attached to the port. Avoid waiting polling for !0xff if it's PATA. It's needed only for some rare SATA devices anyway. This problem is reported by Luca Tettamanti in bugzilla bug 9298. Signed-off-by: Tejun Heo <htejun@gmail.com> Tested-By: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: pata_platform: Support polling-mode configuration.Paul Mundt2007-11-08
| | | | | | | | | | | | | | | Some SH boards (old R2D-1 boards) have generally not had working CF under libata, due to both buswidth issues (handled by Aoi Shinkai in 43f4b8c7578b928892b6f01d374346ae14e5eb70), and buggy interrupt controllers. For these sorts of boards simply disabling the IRQ and polling ends up working fine. This conditionalizes the IRQ resource for pata_platform and lets platforms that want to use polling mode simply omit the resource entirely. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: Support PIO polling-only hosts.Paul Mundt2007-11-08
| | | | | | | | | | | | | | By default ata_host_activate() expects a valid IRQ in order to successfully register the host. This patch enables a special case for registering polling-only hosts that either don't have IRQs or have buggy IRQ generation (either in terms of handling or sensing), which otherwise work fine. Hosts that want to use polling mode can simply set ATA_FLAG_PIO_POLLING and pass in an invalid IRQ. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata sata_qstor conversion to new error handling (EH).Mark Lord2007-11-08
| | | | | | | | | | sata_qstor conversion to new error handling (EH). Convert sata_qstor to use the newer libata EH mechanisms. Based on earlier work by Jeff Garzik. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata sata_qstor workaround for spurious interruptsMark Lord2007-11-08
| | | | | | | | | | | | | | | | sata_qstor workaround for spurious interrupts. The qstor hardware generates spurious interrupts from time to time when switching in and out of packet mode. These eventually result in the IRQ being disabled, which kills other devices sharing this IRQ with us. This workaround isn't perfect, but it's about the best we can do for this hardware. Spurious interrupts will still happen, but won't be logged as such, and therefore won't cause the IRQ to be inadvertently disabled. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata sata_qstor nuke idle stateMark Lord2007-11-08
| | | | | | | | | | sata_qstor nuke idle state. We're really only ever in one of two hardware states: packet, or mmio. Get rid of unnecessary "qs_state_idle" state. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* nv_hardreset: update dangling reference to bugzilla entryFernando Luis Vázquez Cao2007-11-08
| | | | | Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata_piix: add SATELLITE PRO U200 to broken suspend listYann Chachkoff2007-11-08
| | | | | | | | | | | | Please warmly welcome the PRO variant of Satellite U200 to the broken suspend list. Original patch is from Yann Chachkoff. Patch reformatted and forwarded by Tejun Heo. Signed-off-by: Yann Chachkoff <yann.chachkoff@myrealbox.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: handle broken cable reportingAlan Cox2007-11-05
| | | | | | | | | | | | | One or two ancient drives predated the cable spec and didn't sent the valid bits for the field. I had hoped to leave this out of libata as a piece of historical annoyance but a recent CD drive shows the same bug so we have to import support for it. Same concept as Bartlomiej's changes old IDE except that as we have centralised blacklists we can avoid keeping another private table of stuff Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_hpt37x: Fix outstanding bug reports on the HPT374 and 37x cable detectAlan Cox2007-11-05
| | | | | | | | | - Read frequency correctly - Correct cable detect handling - Fix wrong filter test Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata_piix: Add additional PCI identifier for 40 wire short cableAlan Cox2007-11-05
| | | | | | | Keeping the list in sync with the old IDE driver Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_serverworks: Fix problem with some drive combinationsAlan Cox2007-11-05
| | | | | | | | | The driver used the channel not the device number for deciding where to load some timing parameters. Also change so that we clear the UDMA field as the old driver did. Not believed neccessary but does no harm. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: Don't disable dipm with SET FEATURESKristen Carlson Accardi2007-11-04
| | | | | | | | | LPM seems to get hung up while disabling DIPM, and after thinking about this a bit, I don't think we really need to manually disable it anyway. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] Utilize new SCSI event infrastructureJeff Garzik2007-11-03
| | | | | | | An end to CD-ROM polling (if you have a device that supports AN)... hooray! Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: don't configure downstream links faster than the upstream linkTejun Heo2007-11-03
| | | | | | | | | There's nothing to be gained by configuring downstream links faster than the upstream link and such configurations cause problems on certain PMPs. Limit downstream link speed by the upstream link speed. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: request PHY speed configuration on SControl access failureTejun Heo2007-11-03
| | | | | | | | | | In sata_set_spd_needed(), if SControl read failed, it returned 0 and skipped PHY speed configuration. However, if SControl access fails, it's far more logical to request PHY speed configuration. Reverse the logic. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: consider errors not associated with commands for speed downTejun Heo2007-11-03
| | | | | | | | | | | | | | | | | | | libata EH used to ignore errors not associated with commands when determining whether speed down is necessary or not. This leads to the following problems. * Errors not associated with commands can occur indefinitely without libata EH taking corrective actions. * Upstream link errors don't trigger speed down when PMP is attached to it and commands issued to downstream device trigger errors on the upstream link. This patch makes ata_eh_link_autopsy() consider errors not associated with command for speed down. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: more robust reset failure handlingTejun Heo2007-11-03
| | | | | | | | | | | | | | | | | | Reset failure is a critical error. It results in disabling the link requiring user intervention to re-enable it. Make reset failure handling more robust such that libata EH doesn't give up too early. * Temporary glitches during hardreset may lead to classification failure when there's no softreset available. Retry instead of giving up. * Initial softreset or follow up softreset may fail classification. Move classification error handling block out of followup softreset block such that both cases are handled and retry instead of giving up. Also, on the last try, give ATA class a blind shot. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: cosmetic clean up / reorganization of ata_eh_reset()Tejun Heo2007-11-03
| | | | | | | | | | | | Clean up and reorganize ata_eh_reset() to ease further changes. * Cache ARRAY_SIZE(ata_eh_reset_timeouts) in @max_tries. * Cache link->flags in @lflags. * Move failure handling block to the end of the function and unnest both success and failure handling blocks. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: fix timing computation in ata_eh_reset()Tejun Heo2007-11-03
| | | | | | | | | As jiffies changes asynchronously, it needs to be cached if unchanging timestamp is needed. The code in ata_eh_reset() intended to do that with @now but never actually did it. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: increase 128 KB / cmd limit for ATAPI tape drivesTony Battersby2007-11-03
| | | | | | | | | | | | | | | | | | | | | | | Commands sent to ATAPI tape drives via the SCSI generic (sg) driver are limited in the amount of data that they can transfer by the max_sectors value. The max_sectors value is currently calculated according to the command set for disk drives, which doesn't apply to tape drives. The default max_sectors value of 256 limits ATAPI tape drive commands to 128 KB. This patch against 2.6.24-rc1 increases the max_sectors value for tape drives to 65535, which permits tape drive commands to transfer just under 32 MB. Tested with a SuperMicro PDSME motherboard, AHCI, and a Sony SDX-570V SATA tape drive. Note that some of the chipset drivers also set their own max_sectors value, which may override the value set in libata-core. I don't have any of these chipsets to test, so I didn't go messing with them. Also, ATAPI devices other than tape drives may benefit from similar changes, but I have only tape drives and disk drives to test. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_promise: fix endianess bug in ASIC PRD bug workaroundMikael Pettersson2007-11-03
| | | | | | | | | | | | | | | | | The original workaround for the Promise ASIC PRD bug contained an endianess bug which I failed to detect: the adjustment of the last PRD entry's length field applied host arithmetic to little-endian data, which is incorrect on big-endian machines. We have the length available in host-endian format, so do the adjustment on host-endian data and then convert and store it in the PRD entry's little-endian data field. Thanks to an anonymous reviewer for detecting this bug. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: fix docbookStephen Hemminger2007-11-03
| | | | | | | Fix docbook format in the comments. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* make ata_scsi_lpm_get() staticAdrian Bunk2007-11-03
| | | | | | | ata_scsi_lpm_get() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: suppress two warningsStephen Rothwell2007-11-03
| | | | | | | | drivers/ata/libata-core.c:768: warning: 'ata_lpm_enable' defined but not used drivers/ata/libata-core.c:784: warning: 'ata_lpm_disable' defined but not used Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: Remove ata_scsi_suspend/resume callbacksashish kalra2007-11-03
| | | | | | Signed-off-by: ashish kalra <ashish.kalra@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: Remove sending LOG EXT command in sata_fsl_softreset()ashish kalra2007-11-03
| | | | | | Signed-off-by: ashish kalra <ashish.kalra@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: Move MPC8315DS link speed limit workaround to specific ifdefashish kalra2007-11-03
| | | | | | Signed-off-by: ashish kalra <ashish.kalra@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: cleanup style problemLi Yang2007-11-03
| | | | | Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: remove unneeded sata_fsl_hardreset()Jeff Garzik2007-11-03
| | | | | | Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: remove unneeded on-stack copy of FISJeff Garzik2007-11-03
| | | | | | | | | Remove unneeded on-stack copy of FIS in sata_fsl_cache_taskfile_from_d2h_fis(). Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: cleanup needless casts to/from void __iomem *Jeff Garzik2007-11-03
| | | | | | Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: Remove unnecessary SCR casesJeff Garzik2007-11-03
| | | | | | | | | | SCRs in the driver map to the standard values found in include/linux/ata.h, so no need for individual scr_read/scr_write case statements duplicating the natural value. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: Kill ata_sg_is_last()Li Yang2007-11-03
| | | | | Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: save irq in private data for irq unmappingLi Yang2007-11-03
| | | | | | | Powerpc uses virtual irq which has to be unmapped. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: Remove deprecated hooksLi Yang2007-11-03
| | | | | Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: Update for ata_link introductionLi Yang2007-11-03
| | | | | | | Update the driver to use the newly added ata_link structure. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: implement and use ATA_QCFLAG_QUIETTejun Heo2007-10-30
| | | | | | | | | | | | | | | | | | | | Implement ATA_QCFLAG_QUIET which indicates that there's no need to report if the command fails with AC_ERR_DEV and set it for passthrough commands. Combined with previous changes, this now makes device errors for all direct commands reported directly to the issuer without going through EH actions and reporting. Note that EH is still invoked after non-IO device errors to determine the nature of the error and resume command execution (some controller requires special care after error to continue). It just performs default maintenance after error, examines what's going on, realizes that it's none of its business and reports the command failure without logging any error messages. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: stop being overjealous about non-IO commandsTejun Heo2007-10-30
| | | | | | | | | | | | | | | | | | | | | | libata EH always revalidated device and retried failed command after error except for ATAPI CCs. This is unnecessary and hinders with users issuing direct commands. This patch makes the following changes. * Make sata_sil24 not request ATA_EH_REVALIDATE on device errors. sil24 is the only driver which does this. All others let libata EH core code decide. * Don't request revalidation after device error of non-IO command. Revalidation doesn't really help anybody. As ATA_EH_REVALIDATE isn't set by default, there's no reason to clear it after sense data is read. Kill ATA_EH_REVALIDATE clearing code while at it. * Don't retry non-IO command after device error. Device has rejected the command. There's no point in retrying. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: flush is an IO commandTejun Heo2007-10-30
| | | | | | | | | | | ATA_QCFLAG_IO is used to mark commands which are used to perform regluar IO transfers via block layer. These commands are assumed to be valid and taken more seriously during error handling. Cache flush is used by regular IO path and necessary for data integrity. Mark it with ATA_QCFLAG_IO. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_promise: cleanupsMikael Pettersson2007-10-30
| | | | | | | | | | | | | | Minor sata_promise cleanups: - use C99 array initialisers in pdc_port_info[] - add myself in the file head's Maintained by note, since users don't always read the MAINTAINERS file - SG/PRD bug workaround warrants driver version bump Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> -- drivers/ata/sata_promise.c | 17 +++++++++-------- 1 files changed, 9 insertions(+), 8 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_promise: ASIC PRD table bug workaround, take 2Mikael Pettersson2007-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | Second-generation Promise SATA controllers have an ASIC bug which can trigger if the last PRD entry is larger than 164 bytes, resulting in intermittent errors and possible data corruption. Work around this by replacing calls to ata_qc_prep() with a private version that fills the PRD, checks the size of the last entry, and if necessary splits it to avoid the bug. Also reduce sg_tablesize by 1 to accommodate the new entry. Tested on the second-generation SATA300 TX4 and SATA300 TX2plus, and the first-generation PDC20378. Thanks to Alexander Sabourenkov for verifying the bug by studying the vendor driver, and for writing the initial patch upon which this one is based. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> -- Changes since previous version: * use new PDC_MAX_PRD constant to initialise sg_tablesize drivers/ata/sata_promise.c | 87 ++++++++++++++++++++++++++++++++++++++++++--- 1 files changed, 83 insertions(+), 4 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'alpm' of ↵Linus Torvalds2007-10-29
|\ | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'alpm' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] AHCI: add hw link power management support [libata] Link power management infrastructure
| * [libata] AHCI: add hw link power management supportKristen Carlson Accardi2007-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch will set the correct bits to turn on Aggressive Link Power Management (ALPM) for the ahci driver. This will cause the controller and disk to negotiate a lower power state for the link when there is no activity (see the AHCI 1.x spec for details). This feature is mutually exclusive with Hot Plug, so when ALPM is enabled, Hot Plug is disabled. ALPM will be enabled by default, but it is settable via the scsi host syfs interface. Possible settings for this feature are: Setting Effect ---------------------------------------------------------- min_power ALPM is enabled, and link set to enter lowest power state (SLUMBER) when idle Hot plug not allowed. max_performance ALPM is disabled, Hot Plug is allowed medium_power ALPM is enabled, and link set to enter second lowest power state (PARTIAL) when idle. Hot plug not allowed. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * [libata] Link power management infrastructureKristen Carlson Accardi2007-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | Merge branch 'upstream-linus' of ↵Linus Torvalds2007-10-29
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] AHCI: fix newly introduced host-reset bug [libata] sata_nv: fix SWNCQ enabling libata: add MAXTOR 7V300F0/VA111900 to NCQ blacklist libata: no need to speed down if already at PIO0 libata: relocate forcing PIO0 on reset pata_ns87415: define SUPERIO_IDE_MAX_RETRIES [libata] Address some checkpatch-spotted issues [libata] fix 'if(' and similar areas that lack whitespace libata: implement ata_wait_after_reset() libata: track SLEEP state and issue SRST to wake it up libata: relocate and fix post-command processing
| * [libata] AHCI: fix newly introduced host-reset bugJeff Garzik2007-10-29
| | | | | | | | | | | | | | | | | | The recent fix to host reset introduced a problem, whereby AHCI-enable bit would be cleared upon reset, if it was not asserted prior to reset. Unconditionally enable AHCI-enable bit. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * [libata] sata_nv: fix SWNCQ enablingJeff Garzik2007-10-29
| | | | | | | | | | | | Adapted from patches by Kuan Lou @ NVIDIA and Bartlomiej Zolnierkiewicz. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-30 02:33:04 -0500