aboutsummaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAge
* ARM: 7127/1: hw_breakpoint: skip v7-specific reset on v6 coresWill Deacon2011-10-08
| | | | | | | | | | ARMv6 cores do not implement the DBGOSLAR register, so we don't need to try and clear it on boot. Furthermore, the VCR is zeroed out of reset, so we don't need to zero it explicitly when a CPU comes online. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'for_3_2/for-rmk/arm_cpu_pm' of ↵Russell King2011-09-26
|\ | | | | | | git://gitorious.org/omap-sw-develoment/linux-omap-dev into devel-stable
| * ARM: mm: Add strongly ordered descriptor support.Santosh Shilimkar2011-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On certain architectures, there might be a need to mark certain addresses with strongly ordered memory attributes to avoid ordering issues at the interconnect level. On OMAP4, the asynchronous bridge buffers can only be drained with strongly ordered accesses and hence the need to mark the memory strongly ordered. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Woodruff Richard <r-woodruff2@ti.com> Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
| * ARM: vfp: Fix the comment to make it consistent with the code.Santosh Shilimkar2011-09-23
| | | | | | | | | | | | | | Function vfp_force_reload() clears vfp_current_hw_state, so update the comment accordingly. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
| * ARM: gic: Allow gic arch extensions to provide irqchip flagsColin Cross2011-09-23
| | | | | | | | | | | | | | | | | | | | | | Tegra can benefit from the IRQCHIP_MASK_ON_SUSPEND flag, allow it to be passed to the gic irq chip. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-and-Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
| * ARM: vfp: Use cpu pm notifiers to save vfp stateColin Cross2011-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When the cpu is powered down in a low power mode, the vfp registers may be reset. This patch uses CPU_PM_ENTER and CPU_PM_EXIT notifiers to save and restore the cpu's vfp registers. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-and-Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
| * ARM: gic: Use cpu pm notifiers to save gic stateColin Cross2011-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the cpu is powered down in a low power mode, the gic cpu interface may be reset, and when the cpu cluster is powered down, the gic distributor may also be reset. This patch uses CPU_PM_ENTER and CPU_PM_EXIT notifiers to save and restore the gic cpu interface registers, and the CPU_CLUSTER_PM_ENTER and CPU_CLUSTER_PM_EXIT notifiers to save and restore the gic distributor registers. Original-author: Gary King <gking@nvidia.com> Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-and-Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
| * ARM: Enable CPU_PM notifiers on ARM machines.Santosh Shilimkar2011-09-23
| | | | | | | | | | | | Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-and-Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
* | Merge branch 'pm' into devel-stableRussell King2011-09-22
|\ \
| * | ARM: pm: add L2 cache cleaning for suspendRussell King2011-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to ensure that state is pushed out from the L2 cache when suspending so that the resume paths can access their data before the MMU and caches have been re-initialized. Add the necessary calls to __cpu_suspend_save(). Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: pm: convert some assembly to CRussell King2011-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert some of the sleep.S guts to C code, which makes it easier to use our macros and to add L2 cache handling. We provide a helper function, __cpu_suspend_save(), which deals with saving the common state, setting up for resume, and flushing caches. The remainder left as assembly code is the saving of the CPU general purpose registers, and allocating space on the stack to save the CPU specific registers and resume state. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: pm: get rid of cpu_resume_turn_mmu_onRussell King2011-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't require cpu_resume_turn_mmu_on as we can combine the ldr instruction with the following code provided we ensure that cpu_resume_mmu is aligned for older CPUs. Note that we also align to a 32-byte boundary to ensure that the code can't cross a section boundary. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: pm: no need to save/restore context ID registerRussell King2011-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to save and restore the context ID register on ARMv6 and ARMv7 with a temporary page table as we write the context ID register when we switch back to the real page tables for the thread. Moreover, the temporary page tables do not contain any non-global mappings, so the context ID value should not be used. To be safe, initialize the register to a reserved context ID value. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: pm: only use preallocated page table during resumeRussell King2011-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only use the preallocated page table during the resume, not while suspending. This avoids the overhead of having to switch unnecessarily to the resume page table in the suspend path. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: pm: preallocate a page table for suspend/resumeRussell King2011-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Preallocate a page table and setup an identity mapping for the MMU enable code. This means we don't have to "borrow" a page table to do this, avoiding complexities with L2 cache coherency. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: pm: force non-zero return value from __cpu_suspend when abortingRussell King2011-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensure that the return value from __cpu_suspend is non-zero when aborting. Zero indicates a successful suspend occurred. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | Merge branch 'kprobes-test' of git://git.yxit.co.uk/linux into devel-stableRussell King2011-09-21
|\ \ \
| * | | ARM: kprobes: Add introductory comment to test codeJon Medhurst2011-09-20
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
| * | | ARM: kprobes: Add some benchmarking to test moduleJon Medhurst2011-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These benchmarks show the basic speed of kprobes and verify the success of optimisations done to the emulation of typical function entry instructions (i.e. push/stmdb). Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
| * | | ARM: kprobes: Add decoding table test coverage analysisJon Medhurst2011-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is used to verify that all combinations of CPU instructions described by the kprobes decoding tables have a test case. Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
| * | | ARM: kprobes: Add decoding table self-consistency testsJon Medhurst2011-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These check that the bitmask and match value used in the decoding tables are self consistent. Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
| * | | ARM: kprobes: Add exports for test codeJon Medhurst2011-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The test code will be using kprobes' internal decoding tables so we need to export these for when then the tests are compiled as a module. Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
| * | | ARM: kprobes: Add ARM instruction simulation test casesJon Medhurst2011-09-20
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
| * | | ARM: kprobes: Add Thumb instruction simulation test casesJon Medhurst2011-09-20
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
| * | | ARM: kprobes: Framework for instruction set test casesJon Medhurst2011-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On ARM we have to simulate/emulate CPU instructions in order to singlestep them. This patch adds a framework which can be used to construct test cases for different instruction forms. It is described in detail in the in-source comments of kprobes-test.c Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
| * | | ARM: kprobes: Add basic API testsJon Medhurst2011-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These test that the different kinds of probes can be successfully placed into ARM and Thumb code and that the handlers are called correctly when this code is executed. Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
| * | | ARM: kprobes: Add config option for selecting the ARM kprobes testsJon Medhurst2011-09-20
| | |/ | |/| | | | | | | | | | Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
| * | Merge branch 'fixes' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds2011-09-12
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'fixes' of git://git.linaro.org/people/arnd/arm-soc: ARM: CSR: add missing sentinels to of_device_id tables ARM: cns3xxx: Fix newly introduced warnings in the PCIe code ARM: cns3xxx: Fix compile error caused by hardware.h removed ARM: davinci: fix cache flush build error ARM: davinci: correct MDSTAT_STATE_MASK ARM: davinci: da850 EVM: read mac address from SPI flash OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers OMAP2430: hwmod: musb: add missing terminator to omap2430_usbhsotg_addrs[] OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomain OMAP4: clock: fix compile warning OMAP4: clock: re-enable previous clockdomain enable/disable sequence OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup OMAP: powerdomains: Make all powerdomain target states as ON at init
| | * \ Merge branch 'for_3.1/pm-fixes-2' of ↵Arnd Bergmann2011-09-12
| | |\ \ | | | | | | | | | | | | | | | git://gitorious.org/khilman/linux-omap-pm into fixes
| | | * | OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlersKevin Hilman2011-09-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The suspend/resume _noirq handlers were #ifdef'd out in the !CONFIG_SUSPEND case, but were still assigned to the dev_pm_ops struct. Fix by defining them to NULL in the !CONFIG_SUSPEND case. Reported-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kevin Hilman <khilman@ti.com>
| | * | | Merge branch 'sirf/fixes' into fixesArnd Bergmann2011-09-12
| | |\ \ \
| | | * | | ARM: CSR: add missing sentinels to of_device_id tablesJamie Iles2011-09-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The of_device_id tables used for matching should be terminated with empty sentinel values. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Barry Song <baohua.song@csr.com>
| | | | | |
| | | \ \ \
| | *-. \ \ \ Merge branches 'cns3xxx/fixes', 'omap/fixes' and 'davinci/fixes' into fixesArnd Bergmann2011-09-10
| | |\ \ \ \ \
| | | | * | | | ARM: davinci: fix cache flush build errorLinus Walleij2011-09-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TNET variant of DaVinci compiles some code that it shares with other DaVinci variants, however it has a V6 CPU rather than an ARM926T, thus the hardcoded call to arm926_flush_kern_cache_all() in sleep.S will obviously fail, and we need to build with the v6_flush_kern_cache_all() call instead. This was triggered by manually altering the DaVinci config to build the TNET version. Cc: Dave Martin <dave.martin@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: stable@kernel.org
| | | | * | | | ARM: davinci: correct MDSTAT_STATE_MASKSergei Shtylyov2011-09-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MDSTAT.STATE occupies bits 0..5 according to all available documentation, so fix the #define MDSTAT_STATE_MASK at last. Using the wrong value seems to have been harmless though... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
| | | | * | | | ARM: davinci: da850 EVM: read mac address from SPI flashRajashekhara, Sudhakar2011-09-07
| | | | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DA850/OMAP-L138 EMAC driver uses random mac address instead of a fixed one because the mac address is not stuffed into EMAC platform data. This patch provides a function which reads the mac address stored in SPI flash (registered as MTD device) and populates the EMAC platform data. The function which reads the mac address is registered as a callback which gets called upon addition of MTD device. NOTE: In case the MAC address stored in SPI flash is erased, follow the instructions at [1] to restore it. [1] http://processors.wiki.ti.com/index.php/GSG:_OMAP-L138_DVEVM_Additional_Procedures#Restoring_MAC_address_on_SPI_Flash Modifications in v2: Guarded registering the mtd_notifier only when MTD is enabled. Earlier this was handled using mtd_has_partitions() call, but this has been removed in Linux v3.0. Modifications in v3: a. Guarded da850_evm_m25p80_notify_add() function and da850evm_spi_notifier structure with CONFIG_MTD macros. b. Renamed da850_evm_register_mtd_user() function to da850_evm_setup_mac_addr() and removed the struct mtd_notifier argument to this function. c. Passed the da850evm_spi_notifier structure to register_mtd_user() function. Modifications in v4: Moved the da850_evm_setup_mac_addr() function within the first CONFIG_MTD ifdef construct. Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: stable@kernel.org
| | | | | | |
| | | | \ \ \
| | | | \ \ \
| | | | \ \ \
| | | | \ \ \
| | | | \ \ \
| | | *-----. \ \ \ Merge branches 'non_hwmod_compliant_fix_3.1rc', 'omap3_clock_fixes_3.1rc', ↵Paul Walmsley2011-09-04
| | | |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'omap4_clock_fixes_3.1rc', 'missing_2430_musb_adds_terminator_fix_3.1rc' and 'pwrdm_clkdm_fixes_3.1rc' into prcm-fixes-a-3.1rc
| | | | | | | * | | | OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain ↵Santosh Shilimkar2011-08-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | force wakeup While using clockdomain force wakeup method, not waiting for powerdomain to be effectively ON may end up locking the clockdomain FSM until a next wakeup event occurs. One such issue was seen on OMAP4430, where L4_PER was periodically getting stuck in in-transition state when transitioning from from OSWR to ON. This issue was reported and investigated by Patrick Titiano <p-titiano@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reported-by: Patrick Titiano <p-titiano@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> [paul@pwsan.com: updated to apply; added transition wait on clkdm_deny_idle(); remove two superfluous pwrdm_wait_transition() calls] Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | | | | | | * | | | OMAP: powerdomains: Make all powerdomain target states as ON at initRajendra Nayak2011-08-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Program all powerdomain target state as ON; this is to prevent domains from hitting low power states (if bootloader has target states set to something other than ON) and potentially even losing context while PM is not fully initialized, which can cause the system to crash. The PM late init code can then program the desired target state for all the power domains. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [paul@pwsan.com: dropped comment typo hunk; fixed comment indent and moved to kerneldoc; moved code to pwrdm_init(); changed pwrdm_init() argument name to prevent clash; cleaned up patch description] Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | | | | | * | | | | OMAP2430: hwmod: musb: add missing terminator to omap2430_usbhsotg_addrs[]Paul Walmsley2011-09-04
| | | | | | | |_|/ / | | | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a missing array terminator to omap2430_usbhsotg_addrs[]. Without this terminator, the omap_hwmod resource building code runs off the end of the array, resulting in at least this error -- if not worse behavior: [ 0.578002] musb-omap2430: failed to claim resource 4 [ 0.583465] omap_device: musb-omap2430: build failed (-16) [ 0.589294] Could not build omap_device for musb-omap2430 usb_otg_hs This should have been part of commit 78183f3fdf76f422431a81852468be01b36db325 ("omap_hwmod: use a null structure record to terminate omap_hwmod_addr_space arrays") but was evidently missed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | | | | * | | | | OMAP4: clock: fix compile warningPaul Walmsley2011-08-21
| | | | | | |/ / / | | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following compile warning: arch/arm/mach-omap2/clock44xx_data.c: In function 'omap4xxx_clk_init': arch/arm/mach-omap2/clock44xx_data.c:3371:6: warning: 'cpu_clkflg' may be used uninitialized in this function The approach taken here is intended to work if omap4xxx_clk_init() is converted into an initcall. Thanks to Bjarne Steinsbo <bsteinsbo@gmail.com> for proposing another approach. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Bjarne Steinsbo <bsteinsbo@gmail.com>
| | | | * | | | | OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomainPaul Walmsley2011-08-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The oscillator that supplies GPT12_FCLK and WDT1_FCLK exists in the WKUP powerdomain[1]. This resolves at least one boot-time warning: omap_hwmod: gpt12_fck: missing clockdomain for gpt12_fck. 1. _OMAP34xx Multimedia High Security (HS) Device Silicon Revision 3.1.x Security Addendum Version K (SWPU119K)_ Figure 3-29. August 2010.
| | | * | | | | | OMAP4: clock: re-enable previous clockdomain enable/disable sequencePaul Walmsley2011-08-19
| | | | |/ / / / | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod: Follow the recommended PRCM module enable sequence"), device drivers for OMAP IP blocks that do not use runtime PM can cause oopses or kernel instability[1][2]. This is because those non-runtime PM drivers do not use the hwmod code, which implements the correct IP block enable and disable sequence. Several options for dealing with this problem have been proposed: 1. Add a new field to the OMAP struct clk to mark clocks that are currently used by non-runtime PM drivers. Modify the clock code to use the old clockdomain sequence for these marked clocks. As drivers are converted to use runtime PM, remove the annotation from the clocks. 2. Similar to #1, but associate the flag with the struct omap_clk instead. 3. Add IDLEST wait support to the OMAP4 clock code, similar to the way it is implemented for OMAP2/3, and enable it in each struct clk currently used by non-runtime PM drivers. As drivers are converted to use runtime PM, remove the annotation from the clocks. 4. Do nothing; leave the problem to those responsible for the unconverted drivers. 5. Re-enable clock-based clockdomain control in the OMAP4 clock code. This would revert back to the behavior of Linux 3.0, simply with a slightly longer module enable/disable latency. Unfortunately, no approach seemed particularly good. Options 1 through 3 seemed unwise due to the following reasons: A. The OMAP struct clks are intended primarily to describe hardware clock nodes, and the intention is that no driver-specific data should be stored there (applies to #1) B. The resulting patch would have been quite large for the -rc series (applies to #1, #2, #3) C. The patch would have been a new, yet temporary hack; and similar fixes have drawn negative comments in the recent past (see for example [3]) Option 4 is undesirable because commit 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod: Follow the recommended PRCM module enable sequence") has resulted in a less stable kernel; and kernel stability is more important than OMAP4 power management. Option 5 is the approach taken in this patch. This seemed to be the least intrusive approach for 3.1-rc. The approach in this patch was originally proposed by Ohad Ben-Cohen <ohad@wizery.com>. I'm simply writing the commit message and passing it along. ... Thanks to Luciano Coelho <coelho@ti.com> for reporting the problem. Thanks to Ohad Ben-Cohen <ohad@wizery.com> for tracking the problem down, generating a temporary workaround, and proposing a patch to deal with the problem. Thanks to Rajendra Nayak <rnayak@ti.com> for proposing another patch to deal with the problem. Thanks to Felipe Balbi <balbi@ti.com> for comments. 1. Coelho, Luciano <coelho@ti.com>. _Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda_. Tue, 09 Aug 2011 14:26:08 +0300. Posted to the <linux-omap@vger.kernel.org> mailing list. Available from (among others) http://www.spinics.net/linux/lists/linux-omap/msg55213.html 2. Munegowda, Keshava <keshava_mgowda@ti.com>. _Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda_. Thu, 11 Aug 2011 13:51:05 +0530. Posted to the <linux-omap@vger.kernel.org> mailing list. Available from (among others) http://www.spinics.net/linux/lists/linux-omap/msg55371.html 3. King, Russell <linux@arm.linux.org.uk>. _Re: [PATCH 5/8] OMAP4: PM: TEMP: Prevent l3init from idling/force sleep_. Thu, 23 Jun 2011 16:22:49 +0100. Posted to the <linux-omap@vger.kernel.org> mailing list. Available from (among others) http://www.mail-archive.com/linux-omap@vger.kernel.org/msg51392.html Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Luciano Coelho <coelho@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
| | * | | | | | ARM: cns3xxx: Fix newly introduced warnings in the PCIe codeAnton Vorontsov2011-09-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d5341942d784134f2997b3ff82cd63cf71d1f932 ("PCI: Make the struct pci_dev * argument of pci_fixup_irqs const") did not change argument of pdev_to_cnspci(), and thus introduced the following warnings: CHECK arch/arm/mach-cns3xxx/pcie.c pcie.c:177:60: warning: incorrect type in argument 1 (different modifiers) pcie.c:177:60: expected struct pci_dev *dev pcie.c:177:60: got struct pci_dev const *dev CC arch/arm/mach-cns3xxx/pcie.o pcie.c: In function 'cns3xxx_pcie_map_irq': pcie.c:177: warning: passing argument 1 of 'pdev_to_cnspci' discards qualifiers from pointer target type pcie.c:52: note: expected 'struct pci_dev *' but argument is of type 'const struct pci_dev *' This patch fixes the issue. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
| | * | | | | | ARM: cns3xxx: Fix compile error caused by hardware.h removedTommy Lin2011-09-09
| | | |_|_|/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit c9d95fbe59e426eed7f16e7cac812e46ac4772d0 "ARM: convert PCI defines to variables" deleted cns3xxx' hardware.h, but didn't remove references for it, so do it now. This patch removes lines that refer to hardware.h. Signed-off-by: Tommy Lin <tommy.lin.1101@gmail.com> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
| * | | | | | Merge branch 'for-linus' of git://openrisc.net/~jonas/linuxLinus Torvalds2011-09-11
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://openrisc.net/~jonas/linux: Add missing DMA ops openrisc: don't use pt_regs in struct sigcontext
| | * | | | | | Add missing DMA opsJonas Bonn2011-09-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the initial architecture submission, not all of the DMA ops were implemented. This patch adds the *map_page and *map_sg variants of the DMA mapping ops. This patch is currently of interest mainly to some drivers that haven't been submitted upstream yet. Signed-off-by: Jonas Bonn <jonas@southpole.se>
| | * | | | | | openrisc: don't use pt_regs in struct sigcontextJonas Bonn2011-09-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As it was decided not to export struct pt_regs to userspace, struct sigcontext shouldn't be using it either. The pt_regs struct for OpenRISC is kernel internal and the layout of the registers may change in the future. The struct user_regs_struct is what is guaranteed to remain stable, so struct sigcontext may use that instead. This patch removes the usage of struct pt_regs in struct sigcontext and makes according changes in signal.c to get the register layout right. The usp field is removed from the sigcontext structure as this information is already contained in the user_regs_struct. Signed-off-by: Jonas Bonn <jonas@southpole.se> Reviewed-by: Emilio Cota <cota@braap.org>
| * | | | | | | Merge branch 'fixes' of ↵Linus Torvalds2011-09-10
| |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7088/1: entry: fix wrong parameter name used in do_thumb_abort ARM: 7080/1: l2x0: make sure I&D are not locked down on init ARM: 7081/1: mach-integrator: fix the clocksource NET: am79c961: fix race in link status code ARM: 7067/1: mm: keep significant bits in pfn_valid
| | * | | | | | | ARM: 7088/1: entry: fix wrong parameter name used in do_thumb_abortJanusz Krzysztofik2011-09-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit be020f8618ca, "ARM: entry: abort-macro: specify registers to be used for macros", while replacing register numbers with macro parameter names, mismatched the name used for r1. For me, this resulted in user space built for EABI with -march=armv4t -mtune=arm920t -mthumb-interwork -mthumb broken on my OMAP1510 based Amstrad Delta (old ABI and no thumb still worked for me though). Fix this by using correct parameter name fsr instead of mismatched psr, used by callers for another purpose. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.2 (git 2.25.0) at 2025-03-07 02:51:00 -0500