aboutsummaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAge
* Blackfin arch: to do some consolidation of common code and common name spacesRobin Getz2007-10-10
| | | | | | | | now all BLKFIN should be BFIN, should be no functional changes. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin arch: remove unused code -- EVT0 is not controllable by softwareMike Frysinger2007-08-03
| | | | | | Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin arch: Add option to priorize DMA over CoreMichael Hennerich2007-08-03
| | | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin arch: Add support for the M25P16 SPI FLashMichael Hennerich2007-08-05
| | | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin arch: add set_dma_curr_addr DMA API to support sound driver ↵Roy Huang2007-10-10
| | | | | | | | recording function Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin arch: Add ability to expend the hardware trace bufferRobin Getz2007-07-24
| | | | | | | | | | | | Add ability to expend the hardware trace buffer via a configurable software buffer - so you can have lots of history when a crash occurs. The interesting way we do printk in the traps.c confusese the checking script Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin arch: Fix CCLK and SCLK checksRobin Getz2007-08-03
| | | | | | | | | | Fix CCLK and SCLK checks, combine all arch checks into one file for maintance. Checkins that remove more lines than they add are always good. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin arch: Some cosmetics based on LKML feedback from Joe PerchesMichael Hennerich2007-08-03
| | | | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin arch: add missing gpio error handling to make sure we roll back ↵Michael Hennerich2007-07-24
| | | | | | | | requests in case one fails Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin arch: Add PORT_J.High (needed for BF548-EZkit Touchscreen ↵Michael Hennerich2007-07-24
| | | | | | | | interrupts) - remove PORT_C.H Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin arch: Add label to call new GPIO APIMichael Hennerich2007-07-24
| | | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin arch: store labels so we later know who allocated GPIO/Peripheral ↵Michael Hennerich2007-10-10
| | | | | | | | resources Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin arch: Advertise GENERIC_GPIO and remove duplicated ↵Michael Hennerich2007-07-24
| | | | | | | | GENERIC_CALIBRATE_DELAY Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin arch: use HI/LO macros rather than masking the bit ranges ourselvesMike Frysinger2007-07-24
| | | | | | Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin arch: use the [CS]SYNC() macros which include anomaly workarounds ↵Mike Frysinger2007-07-24
| | | | | | | | rather than __builtin_bfin_[cs]sync() Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin arch: revise anomaly handling by basing things on the compiler not ↵Mike Frysinger2007-07-24
| | | | | | | | | | | | | the kconfig defines revise anomaly handling by basing things on the compiler not the kconfig defines, so the header is stable and usable outside of the kernel. This also allows us to move some code from preprocessing to compiling (gcc culls dead code) which should help with code quality (readability, catch minor bugs, etc...). Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin arch: update platform driver resource information to all board filesBryan Wu2007-10-10
| | | | | Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* [MIPS] Au1000: set the PCI controller IO baseFlorian Fainelli2007-10-09
| | | | | | | | | The PCI controller IO base was not set in the au1000 pci code. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Alchemy: Fix USB initialization.Florian Fainelli2007-10-09
| | | | | | | | | | | | | | | | | | | | | This patch fixes a wrong ifdef in the board setup code, leading to the GPIO pin not being pulled high, and thus the USB switch not being powered at all. This finishes the rename of CONFIG_USB_OHCI to CONFIG_USB_OHCI_HCD, which started in 2005 (before 2.6.12-rc2), then probably because things were working anyway for most people got forgotten. [Ralf: Paolo's original patch didn't fix the module case, Florian's patch only fixed MTX1 etc. so this is a combined patch plus some cleanups.] Cc: Giuseppe Patanè <giuseppe.patane@tvblob.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] IP32: Fix fatal typo in address computation.Giuseppe Sacco2007-10-09
| | | | | Signed-off-by: Giuseppe Sacco <eppesuig@debian.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Longhaul: add auto enabled "revid_errata" optionRafal Bilski2007-10-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | VIA C3 Ezra-T has RevisionID equal to 1, but it needs RevisionKey to be 0 or CPU will ignore new frequency and will continue to work at old frequency. New "revid_errata" option will force RevisionKey to be set to 0, whatever RevisionID is. Additionaly "Longhaul" will not silently ignore unsuccessful transition. It will try to check if "revid_errata" or "disable_acpi_c3" options need to be enabled for this processor/system. Same for Longhaul ver. 2 support. It will be disabled if none of above options will work. Best case scenario (with patch apllied and v2 enabled): longhaul: VIA C3 'Ezra' [C5C] CPU detected. Longhaul v2 supported. longhaul: Using northbridge support. longhaul: VRM 8.5 longhaul: Max VID=1.350 Min VID=1.050, 13 possible voltage scales longhaul: f: 300000 kHz, index: 0, vid: 1050 mV [...] longhaul: Voltage scaling enabled. Worst case scenario: longhaul: VIA C3 'Ezra-T' [C5M] CPU detected. Powersaver supported. longhaul: Using northbridge support. longhaul: Using ACPI support. longhaul: VRM 8.5 longhaul: Claims to support voltage scaling but min & max are both 1.250. Voltage scaling disabled longhaul: Failed to set requested frequency! longhaul: Enabling "Ignore Revision ID" option. longhaul: Failed to set requested frequency! longhaul: Disabling ACPI C3 support. longhaul: Disabling "Ignore Revision ID" option. longhaul: Failed to set requested frequency! longhaul: Enabling "Ignore Revision ID" option. [akpm@linux-foundation.org: coding-style cleanups] Signed-off-by: Rafal Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds2007-10-06
|\ | | | | | | | | * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] IP32: Enable PCI bridges
| * [MIPS] IP32: Enable PCI bridgesGiuseppe Sacco2007-10-05
| | | | | | | | | | | | | | | | | | Fixe MACE PCI addressing by adding the bus number parameter. Remove check of the used slot since every slot should be valid. Converted mkaddr from #define to inline function. Signed-off-by: Giuseppe Sacco <eppesuig@debian.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2007-10-05
|\ \ | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4598/2: OSIRIS: Ensure we do not get nRSTOUT during suspend [ARM] 4597/2: OSIRIS: ensure CPLD0 is preserved after suspend
| * | [ARM] 4598/2: OSIRIS: Ensure we do not get nRSTOUT during suspendBen Dooks2007-10-05
| | | | | | | | | | | | | | | | | | | | | Ensure nRSTOUT is not asserted during or on resume. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 4597/2: OSIRIS: ensure CPLD0 is preserved after suspendBen Dooks2007-10-05
| |/ | | | | | | | | | | | | | | | | Ensure that CPLD is restored to the original state on resume, and that before going into suspend we select the NAND bank we booted from for restarting. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'master' of ↵Linus Torvalds2007-10-05
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix 'niu' complex IRQ probing. [SPARC64]: check fork_idle() error [SPARC64]: Temporary workaround for PCI-E slot on T1000. [SPARC64]: VIO device addition log message level is too high. [SPARC64]: Fix domain-services port probing. [SPARC64]: Don't use in/local regs for ldx/stx data in N1 memcpy.
| * [SPARC64]: Fix 'niu' complex IRQ probing.David S. Miller2007-10-04
| | | | | | | | | | | | | | They should be computed the same as how we compute them under 'virtual-devices'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: check fork_idle() errorAkinobu Mita2007-10-04
| | | | | | | | | | | | | | Check the return value of fork_idle() to catch error. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Temporary workaround for PCI-E slot on T1000.David S. Miller2007-10-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI-E slot on T1000 connects directly to the Fire PCI chip with no intervening bridges visible in the OBP tree. Unfortunately the bus numbering of the device in that slot is different (2) from the PCI host controller (0), and thus the pci_bus_{read,write}_config_*() calls don't work out. Complicating things further the Fire PCI controller has no config space it responds to either. For now treat this case specially so that devices in the slot work. Longer term we need to perhaps cons up a dummy bridge between the Fire and the PCI-E slot so that the bus hierarchy is complete inside of the kernel and thus the bus numbering all works out right. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: VIO device addition log message level is too high.David S. Miller2007-10-04
| | | | | | | | | | | | | | There is no reason this should be KERN_ERR, KERN_INFO is just fine. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Fix domain-services port probing.David S. Miller2007-10-04
| | | | | | | | | | | | | | We should only use ports underneath "domain-services", other DS ports in the MDESC aren't for us to use. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Don't use in/local regs for ldx/stx data in N1 memcpy.David S. Miller2007-10-02
| | | | | | | | | | | | | | | | | | | | It doesn't matter for use in 64-bit objects, but when used in 32-bit environments the top 32-bits of the local and in registers will get chopped off on the next register window spill/restore which leads to difficult to track down and subtle bugs. Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds2007-10-03
|\ \ | | | | | | | | | | | | | | | | | | * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Terminally fix local_{dec,sub}_if_positive [MIPS] Type proof reimplementation of cmpxchg. [MIPS] pg-r4k.c: Fix a typo in an R4600 v2 erratum workaround
| * | [MIPS] pg-r4k.c: Fix a typo in an R4600 v2 erratum workaroundMaciej W. Rozycki2007-10-03
| |/ | | | | | | | | | | | | | | Restore a load from KSEG1 done as a workaround for an R4600 v2 erratum, dropped with 211be16de99a7424e66c0b6c0d00e2c970508ac2. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | Blackfin arch: fix PORT_J BUG for BF537/6 EMAC driver reported by Kalle ↵Michael Hennerich2007-10-03
| | | | | | | | | | | | | | | | | | Pokki <kalle.pokki@iki.fi> Cc: Kalle Pokki <kalle.pokki@iki.fi> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* | Blackfin arch: gpio pinmux and resource allocation API required by BF537 on ↵Michael Hennerich2007-10-03
| | | | | | | | | | | | | | | | chip ethernet mac driver Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* | Blackfin arch: add some missing syscallBryan Wu2007-09-22
|/ | | | | | | | | | | When compiling the Blackfin kernel, checksyscalls.pl will report lots of missing syscalls warnings. This patch will add some missing syscalls which make sense on Blackfin arch After appling this patch, toolchain should be rebuilt. Then recompiling the kernel with the new toolchain. Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Merge branch 'master' of ↵Linus Torvalds2007-10-02
|\ | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix missing load-twin usage in Niagara-1 memcpy. [SPARC64]: Fix put_user() calls in binfmt_aout32.c [SPARC]: Fix EBUS use of uninitialized variable.
| * [SPARC64]: Fix missing load-twin usage in Niagara-1 memcpy.David S. Miller2007-10-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | For the case where the source is not aligned modulo 8 we don't use load-twins to suck the data in and this kills performance since normal loads allocate in the L1 cache (unlike load-twin) and thus big memcpys swipe the entire L1 D-cache. We need to allocate a register window to implement this properly, but that actually simplifies a lot of things as a nice side-effect. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Fix put_user() calls in binfmt_aout32.cDavid S. Miller2007-09-30
| | | | | | | | | | | | | | | | | | | | argv and envp are pointers to u32's in userspace, so don't try to put_user() a NULL to them. Aparently gcc-4.2.x now warns about this, and since we use -Werror for arch/sparc64 code, this breaks the build. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC]: Fix EBUS use of uninitialized variable.David S. Miller2007-09-27
| | | | | | | | | | | | | | | | | | | | If of_get_property() fails, it returns NULL and the 'len' parameter is undefined. So we need to explicitly set len to zero in such cases. Noticed by Al Viro. Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'merge' of ↵Linus Torvalds2007-10-02
|\ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix xics set_affinity code
| * | [POWERPC] Fix xics set_affinity codeAnton Blanchard2007-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a POWER6 machine running 2.6.23-rc8 I sometimes see the following error: xics_set_affinity: No online cpus in the mask 00000000,00000000,00000000,00000001 for irq 20 In a desperate attempt to get a changelog entry in 2.6.23, I took a look into it. It turns out we are passing a real and not a virtual irq into get_irq_server. This works for the case where hwirq < NR_IRQS and we set virq = hwirq. In my case however hwirq = 590082 and we try and access irq_desc[590082], slightly past the end at 512 entries. Lucky we ship lots of memory with our machines. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | | Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds2007-10-01
|\ \ \ | | | | | | | | | | | | | | | | | | | | * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] vmlinux.lds.S: Handle note sections [MIPS] Fix value of O_TRUNC
| * | | [MIPS] vmlinux.lds.S: Handle note sectionsMaciej W. Rozycki2007-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Store any note sections after the exception tables like the other architectures do. This is required for .note.gnu.build-id emitted from binutils 2.18 onwards if nothing else. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | | | x86_64: increase VDSO_TEXT_OFFSET for ancient binutilsAndi Kleen2007-10-01
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For some reason old binutils genertate larger headers so increase the text offset of the vdso to avoid linker errors. Roland McGrath explains: "There are extra symbols in the '.dynsym' section that are responsible for the size difference (They also cause corresponding inflation in '.gnu.version') Older ld's wrongly generated these unneeded symbols in .dynsym. This was fixed not all that long ago (2006); binutils-2.17.50.0.6 might be the first fixed version, but I have not verified for sure where the cutoff was. The unneeded symbols et al from old ld add almost 700 bytes excess. This limits fairly tightly the amount by which the actual text and data in the vDSO can grow in the future without pushing the whole file over 4kb. If it does grow later on, we should consider changing the layout with a config option or something to pack it better without that padding, when building the kernel with newer binutils." Signed-off-by: Andi Kleen <ak@suse.de> Cc: Roland McGrath <roland@redhat.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | [ARM] Resolve PCI section warningsRussell King2007-09-30
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following (valid) section warnings: WARNING: vmlinux.o(.text+0xf7b5c): Section mismatch: reference to .init.text:pcibios_fixup_bus (between 'pci_scan_child_bus' and 'pci_scan_bridge') WARNING: vmlinux.o(.text+0xfc5f4): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_map_rom' and 'pci_unmap_rom') WARNING: vmlinux.o(.text+0xfc824): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_update_resource' and 'pci_claim_resource') WARNING: vmlinux.o(.text+0xfd6d8): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd730): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd788): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd7e0): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfe024): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') WARNING: vmlinux.o(.text+0xfe0f4): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') WARNING: vmlinux.o(.text+0xfe17c): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'for-2.6.23' of ↵Linus Torvalds2007-09-28
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc * 'for-2.6.23' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: [POWERPC] mpc8349emitx.dts: Setup USB-DR for peripheral mode. [POWERPC] Fix mpc834x USB-MPH configuration. [POWERPC] Fix cpm_uart driver for cpm1 machines [PPC] Fix cpm_dpram_addr returning phys mem instead of virt mem [POWERPC] Fix copy'n'paste typo in commproc.c
| * | [POWERPC] mpc8349emitx.dts: Setup USB-DR for peripheral mode.jacmet@sunsite.dk2007-09-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setup dr_mode for USB-DR to peripheral as the default (host mode) doesn't make much sense for the mini-AB connector on the ITX board. Peripheral mode is preferable to OTG as the fsl_usb2_udc.c driver doesn't yet properly support it. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-26 13:50:03 -0500