aboutsummaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAge
* cpuimx27: fix compile when ULPI is selectedEric Bénard2010-10-08
| | | | | | | | | without this patch we get : arch/arm/mach-imx/built-in.o: In function `eukrea_cpuimx27_init': eukrea_mbimx27-baseboard.c:(.init.text+0x44c): undefined reference to `mxc_ulpi_access_ops' Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: imx: set cache line size to 64 bytes for i.MX5Jason Wang2010-08-21
| | | | | | | | | | The core of i.MX5 series is cortex-A8, its cache line size is 64 bytes instead of 32 bytes. Refer to the OMAP3's selection, we choose 64 bytes for i.MX5, this can increase a little bit performance when perform cache operations. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* mx5/clock: fix clear bit fields issue in _clk_ccgr_disable functionJason Wang2010-08-21
| | | | | | | | | | | We can see MXC_CCM_CCGRx_MOD_OFF is defined as 0 while MXC_CCM_CCGRx_CG_MASK is defined as 0x3 in crm_regs.h, here in the _clk_ccgr_disable function, we want to clear the corresponding enable bit fields to disable this clock, so we should choose MASK instead of OFF otherwise clocks can't be disabled. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* mxc/tzic: add base address when accessing TZIC registersJason Wang2010-08-21
| | | | | | | | | When we call tzic_enable_wake function, the kernel will crash because of access to an unmapped address. This is because two register access operations forgot to add base address. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* clock-imx35: Calculate the base clock rate for the IPU unitJuergen Beisert2010-08-17
| | | | | | | | | | The mx3fb driver needs the clock the IPU runs in order to calculate the divider for the LCD clock. This patch adds the clock rate calculation routine for the i.MX35 CPU. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* clock-imx35: correct arm and ahb clock calculationMarc Kleine-Budde2010-08-17
| | | | | | | | | | | | According to the Datasheet: "i.MX35 (MCIMX35) Multimedia Applications Processor Reference Manual, Rev. 2" "Figure 14-24. Clock Control And Gating" change the result of get_rate_ahb based on the frequency returned by get_rate_arm to calculate the proper rate. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* clock-imx35: fix divider if ahb is source for ipg_perMarc Kleine-Budde2010-08-17
| | | | | | | | | | | | | According to the Datasheet: "i.MX35 (MCIMX35) Multimedia Applications Processor Reference Manual, Rev. 2" "Table 14-6. PDR0 Field Descriptions" the divider is CCM_PER_AHB[3:0] + 1. This patch adds the missing + 1. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* i.MX35: remove get_3_3_div helper functionSascha Hauer2010-08-17
| | | | | | | | In the v2 reference manual there are no dividers combined of two dividers. Instead, all dividers are simple 6bit dividers. I assume the combined dividers only exist in preliminary hardware. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* mx35: Fix boot ROM hang in internal boot modeHans J. Koch2010-08-17
| | | | | | | | | | | | If a watchdog reset occurs after booting in internal boot mode, the i.MX35 won't boot anymore. The boot ROM code seems to assume that some clocks are turned on (they are after a power-on reset). This patch turns on the necessary clocks. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by: John Ogness <jogness@linutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* eukrea-baseboards: fix the merge in one fileEric Bénard2010-08-16
| | | | | | | | | Last change I did made a big mess in function names and CONFIG names, this patch fixes this so that the baseboard support is really built when selected. Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'release' of ↵Linus Torvalds2010-08-15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: gcc-4.6: ACPI: fix unused but set variables in ACPI ACPI thermal: make procfs I/F depend on CONFIG_ACPI_PROCFS ACPI video: make procfs I/F depend on CONFIG_ACPI_PROCFS ACPI processor: remove deprecated ACPI procfs I/F ACPI power_resource: remove unused procfs I/F ACPI: remove deprecated ACPI procfs I/F ACPI: introduce drivers/acpi/sysfs.c ACPI: introduce module parameter acpi.aml_debug_output ACPI: introduce drivers/acpi/debugfs.c ACPI, APEI, ERST debug support ACPI, APEI, Manage GHES as platform devices ACPI, APEI, Rename CPER and GHES severity constants ACPI, APEI, Fix a typo of error path of apei_resources_request ACPI / ACPICA: Fix reference counting problems with GPE handlers ACPI: Add the check of ADR flag in course of finding ACPI handle for PCI device ACPI / Sleep: Drop acpi_suspend_finish() ACPI / Sleep: Consolidate suspend and hibernation routines ACPI / Wakeup: Simplify enabling of wakeup devices ACPI / Sleep: Rework enabling wakeup devices ACPI / Sleep: Free NVS copy if suspending of devices fails Fixed up totally buggered "ACPI: fix unused but set variables in ACPI" patch that doesn't even compile in the merge. Thanks to Sedat Dilek <sedat.dilek@googlemail.com> for noticing the breakage before I even pulled. And a big "Grrr.." at Len for not even bothering to compile the tree before asking me to pull.
| * Merge branch 'linus' into releaseLen Brown2010-08-15
| |\ | | | | | | | | | | | | | | | | | | Conflicts: drivers/acpi/debug.c Signed-off-by: Len Brown <len.brown@intel.com>
| * | ACPI, APEI, Rename CPER and GHES severity constantsHuang Ying2010-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The abbreviation of severity should be SEV instead of SER, so the CPER severity constants are renamed accordingly. GHES severity constants are renamed in the same way too. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | | Merge git://git.infradead.org/mtd-2.6Linus Torvalds2010-08-15
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: mtd/nand_ids: Fix buswidth mtd/m25p80: fix test for end of loop mtd/m25p80: retlen is never NULL MIPS: Fix gen_nand probe structures contents gen_nand: Test if nr_chips field is valid BFIN: Fix gen_nand probe structures contents nand/denali: move all hardware initialization work to denali_hw_init nand/denali: Add a page check in denali_read_page & denali_read_page_raw nand/denali: use cpu_relax() while waiting for hardware interrupt nand/denali: change read_status function method nand/denali: Fixed check patch warnings ARM: Fix gen_nand probe structures contents mtd/nand_base: fix kernel-doc warnings & typos nand/denali: use dev_xx debug function to replace nand_dbg_print and some printk nand/denali: Fixed handle ECC error bugs nand/denali: use iowrite32() to replace denali_write32() nand/denali: Fixed probe function bugs
| * | | MIPS: Fix gen_nand probe structures contentsMarek Vasut2010-08-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This platform didn't properly fill nr_chips in gen_nand registration and therefore depended on gen_nand bug fixed by commit 81cbb0b17796d81cbd92defe113cf2a7c7a21fbb ("mtd: gen_nand: fix support for multiple chips") Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | BFIN: Fix gen_nand probe structures contentsMarek Vasut2010-08-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These two platforms didn't properly fill nr_chips in gen_nand registration and therefore depended on gen_nand bug fixed by by commit 81cbb0b17796d81cbd92defe113cf2a7c7a21fbb ("mtd: gen_nand: fix support for multiple chips") Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | ARM: Fix gen_nand probe structures contentsMarek Vasut2010-08-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These three platforms didn't properly fill nr_chips in gen_nand registration and therefore depended on gen_nand bug fixed by commit 81cbb0b17796d81cbd92defe113cf2a7c7a21fbb ("mtd: gen_nand: fix support for multiple chips") Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds2010-08-15
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: don't validate CROSS_COMPILE needlessly arch/tile: export only COMMAND_LINE_SIZE to userspace. arch/tile: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN arch/tile: Rename the hweight() implementations to __arch_hweight() arch/tile: extend syscall ABI to set r1 on return as well. arch/tile: Various cleanups. arch/tile: support backtracing on TILE-Gx arch/tile: Fix a couple of issues with the COMPAT code for TILE-Gx. arch/tile: Use separate, better minsec values for clocksource and sched_clock. arch/tile: correct a bug in freeing bootmem by VA for the optional second initrd. arch: tile: mm: pgtable.c: Removed duplicated #include arch: tile: kernel/proc.c Removed duplicated #include Add fanotify syscalls to <asm-generic/unistd.h>. arch/tile: support new kunmap_atomic() naming convention. tile: remove unused ISA_DMA_THRESHOLD define Conflicts in arch/tile/configs/tile_defconfig (pick the mainline version with the reduced defconfig).
| * | | | arch/tile: don't validate CROSS_COMPILE needlesslyChris Metcalf2010-08-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this change, the arch/tile Makefile will only check for a valid combination of CROSS_COMPILE vs "uname -m" for a few common targets that are typically the ones we get wrong (vmlinux, all, and modules). The change handles the case of an empty "make" goal like "make all". Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
| * | | | arch/tile: export only COMMAND_LINE_SIZE to userspace.Chris Metcalf2010-08-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a failure in "make headers_check" for tile. I hadn't realized this file was exported to userspace by default. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
| * | | | arch/tile: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGNChris Metcalf2010-08-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | See commit a6eb9fe105d5de0053b261148cee56c94b4720ca. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
| * | | | arch/tile: Rename the hweight() implementations to __arch_hweight()Chris Metcalf2010-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | See commit 1527bc8b928dd1399c3d3467dd47d9ede210978a. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
| * | | | Merge branch 'master' into for-linusChris Metcalf2010-08-13
| |\ \ \ \
| * | | | | arch/tile: extend syscall ABI to set r1 on return as well.Chris Metcalf2010-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Until now, the tile architecture ABI for syscall return has just been that r0 holds the return value, and an error is only signalled like it is for kernel code, with a negative small number. However, this means that in multiple places in userspace we end up writing the same three-cycle idiom that tests for a small negative number for error. It seems cleaner to instead move that code into the kernel, and set r1 to hold zero on success or errno on failure; previously, r1 was just zeroed on return from the kernel (to avoid leaking kernel state). This way a single conditional branch after the syscall is sufficient to test for the failure case. The number of cycles taken is the same, but the error-checking code is in just one place, so total code size is smaller, and random userspace syscall code is easier to understand. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
| * | | | | arch/tile: Various cleanups.Chris Metcalf2010-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change rolls up random cleanups not representing any actual bugs. - Remove a stale CONFIG_ value from the default tile_defconfig - Remove unused tns_atomic_xxx() family of methods from <asm/atomic.h> - Optimize get_order() using Tile's "clz" instruction - Fix a bad hypervisor upcall name (not currently used in Linux anyway) - Use __copy_in_user_inatomic() name for consistency, and export it - Export some additional hypervisor driver I/O upcalls and some homecache calls - Remove the obfuscating MEMCPY_TEST_WH64 support code - Other stray comment cleanups, #if 0 removal, etc. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
| * | | | | arch/tile: support backtracing on TILE-GxChris Metcalf2010-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This functionality was stubbed out until recently. Now we support our normal backtracing API on TILE-Gx as well as on TILE64/TILEPro. This change includes a tweak to the instruction encoding caused by adding addxli for compat mode. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
| * | | | | arch/tile: Fix a couple of issues with the COMPAT code for TILE-Gx.Chris Metcalf2010-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | First, the siginfo preamble wasn't quite right; we need to indicate that we are padding up to 4 ints of preamble for 64-bit code, and then for compat mode we need to pad differently, using only 3 ints. Second, the C ABI requires a save area of two registers, not two pointers, since in compat mode we have 64-bit registers all of which we need to save, even though we only have 32-bit VAs. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
| * | | | | arch/tile: Use separate, better minsec values for clocksource and sched_clock.Chris Metcalf2010-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We were using the same 5-sec minsec for the clocksource and sched_clock that we were using for the clock_event_device. For the clock_event_device that's exactly right since it has a short maximum countdown time. But for sched_clock we want to avoid wraparound when converting from ticks to nsec over a much longer window, so we force a shift of 10. And for clocksource it seems dodgy to use a 5-sec minsec as well, so we copy some other platforms and force a shift of 22. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
| * | | | | arch/tile: correct a bug in freeing bootmem by VA for the optional second ↵Chris Metcalf2010-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | initrd. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
| * | | | | arch: tile: mm: pgtable.c: Removed duplicated #includeAndrea Gelmini2010-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
| * | | | | arch: tile: kernel/proc.c Removed duplicated #includeAndrea Gelmini2010-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
| * | | | | arch/tile: support new kunmap_atomic() naming convention.Chris Metcalf2010-08-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | See commit 597781f3e51f48ef8e67be772196d9e9673752c4. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
| * | | | | tile: remove unused ISA_DMA_THRESHOLD defineFUJITA Tomonori2010-08-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No need to define ISA_DMA_THRESHOLD Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> [cmetcalf@tilera.com: converted to a single-line #include file] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
* | | | | | defconfig reductionSam Ravnborg2010-08-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the defconfig files generated by "make savedefconfig" for remaining defconfig files. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* | | | | | archs: replace unifdef-y with header-ySam Ravnborg2010-08-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | unifdef-y and header-y have same semantic, so drop unifdef-y Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* | | | | | Merge branch 'for-linus/samsung-2635' of git://git.fluff.org/bjdooks/linuxLinus Torvalds2010-08-14
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus/samsung-2635' of git://git.fluff.org/bjdooks/linux: DMAENGINE: correct PL080 register header file ARM: SAMSUNG: Fix on build warning about dependency in Kconfig ARM: SMDK6410: Make virtual screen twice depth of real ARM: S3C64XX: Update consistent DMA size to 8MiB ARM: S3C64XX: Add audio support to SmartQ ARM: S3C64XX: Framebuffer fix for SmartQ5 ARM: S3C64XX: Set wifi and iNAND as permanently connected SD devices on SmartQ boards ARM: S3C64XX: Move SmartQ LCD control platform definition to shared file ARM: mach-real6410: add sdhc device support ARM: mach-real6410: add dm9000 ethernet support for mach-real6410 ARM: S3C64XX: Support for Real6410 Fix up trivial conflicts in arch/arm/mach-s3c64xx/mach-smartq5.c ("remove pixclock" vs "Framebuffer fix for SmartQ5")
| * \ \ \ \ \ Merge branch 'for-2636/s3c64xx' into for-linus/samsung-2635Ben Dooks2010-08-14
| |\ \ \ \ \ \
| | * | | | | | ARM: SMDK6410: Make virtual screen twice depth of realBen Dooks2010-08-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For situations where double buffering is needed (such as the current Android) make the screen virtual y size twice the LCD size so that there is space for a second screen that can be switched to. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| | * | | | | | ARM: S3C64XX: Update consistent DMA size to 8MiBBen Dooks2010-08-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the area available for consitent DMA allocations from the default to 8MiB to allow drivers such as the framebuffer to get more memory (for situations where larger virtual screen resolutions are needed). Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| | * | | | | | ARM: S3C64XX: Add audio support to SmartQMaurus Cuelenaere2010-08-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the I²C board information for the WM8987 used in the SmartQ as audio codec and adds the I²C/I²S platform drivers. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| | * | | | | | ARM: S3C64XX: Framebuffer fix for SmartQ5Patrick Georgi2010-08-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following change makes the framebuffer work on SmartQ5. There are still some problems with ADC, so this patch alone won't make the device run (or even give a working fb), but it's one issue less to think about. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| | * | | | | | ARM: S3C64XX: Set wifi and iNAND as permanently connected SD devices on ↵Maurus Cuelenaere2010-08-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SmartQ boards This patch changes the platform data definitions of the wifi and iNAND chip on the SmartQ 5 and 7 to indicate that they don't have a CD line available and are thus hard-wired to the SDHCI data lines. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| | * | | | | | ARM: S3C64XX: Move SmartQ LCD control platform definition to shared fileMaurus Cuelenaere2010-08-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This shares the common LCD control platform definition used in the SmartQ 5 and 7. This also corrects it as a GPIO bitbanged SPI device instead of an I²C one, which was wrong. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| | * | | | | | ARM: mach-real6410: add sdhc device supportDarius Augulis2010-08-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Register SHDCI devices Signed-off-by: Darius Augulis <augulis.darius@gmail.com> [ben-linux@fluff.org: rewrite header[ Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| | * | | | | | ARM: mach-real6410: add dm9000 ethernet support for mach-real6410Darius Augulis2010-08-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is based on "[PATCH v2] Support for Real6410" Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| | * | | | | | ARM: S3C64XX: Support for Real6410Darius Augulis2010-08-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for CoreWind Real6410 board, based on Samsung s3c6410 processor. Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| * | | | | | | DMAENGINE: correct PL080 register header fileLinus Walleij2010-08-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This PL008 among all other variables named PL080 doesn't seem right. Fix it. Also add some missing defined that I use in the new PL08x driver. Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| * | | | | | | ARM: SAMSUNG: Fix on build warning about dependency in KconfigKukjin Kim2010-08-14
| |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes on following build warning. warning: (PLAT_S5P && (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) || ARCH_S3C64XX && <choice>) selects PLAT_SAMSUNG which has unmet direct dependencies (ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX) Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
* | | | | | | Merge branch 'for-linus/i2c-2636' of git://git.fluff.org/bjdooks/linuxLinus Torvalds2010-08-14
|\ \ \ \ \ \ \ | |_|_|_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus/i2c-2636' of git://git.fluff.org/bjdooks/linux: i2c/nuc900: add i2c driver support for nuc900 i2c: Enable NXP LPC support in Kconfig i2c-pxa: fix compiler warning, due to missing const i2c: davinci: bus recovery procedure to clear the bus i2c: davinci: Add cpufreq support i2c: davinci: Add suspend/resume support i2c: davinci: Add helper functions for power management i2c: davinci: misc. cleanups: remove MOD_REG_BIT and IO_ADDRESS usage i2c: davinci: Fix smbus Oops with AIC33 usage
| * | | | | | i2c/nuc900: add i2c driver support for nuc900Wan ZongShun2010-08-10
| |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is to add i2c driver support for nuc900. Signed-off-by: Wan ZongShun <mcuos.com@gmail.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-13 07:41:40 -0500