aboutsummaryrefslogtreecommitdiffstats
path: root/arch/x86/oprofile
Commit message (Collapse)AuthorAge
* x86: Use syscore_ops instead of sysdev classes and sysdevsRafael J. Wysocki2011-03-23
| | | | | | | | | | | | | | | | | | | | | | | | | Some subsystems in the x86 tree need to carry out suspend/resume and shutdown operations with one CPU on-line and interrupts disabled and they define sysdev classes and sysdevs or sysdev drivers for this purpose. This leads to unnecessarily complicated code and excessive memory usage, so switch them to using struct syscore_ops objects for this purpose instead. Generally, there are three categories of subsystems that use sysdevs for implementing PM operations: (1) subsystems whose suspend/resume callbacks ignore their arguments entirely (the majority), (2) subsystems whose suspend/resume callbacks use their struct sys_device argument, but don't really need to do that, because they can be implemented differently in an arguably simpler way (io_apic.c), and (3) subsystems whose suspend/resume callbacks use their struct sys_device argument, but the value of that argument is always the same and could be ignored (microcode_core.c). In all of these cases the subsystems in question may be readily converted to using struct syscore_ops objects for power management and shutdown. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu>
* Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds2011-03-18
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Flush TLB if PGD entry is changed in i386 PAE mode x86, dumpstack: Correct stack dump info when frame pointer is available x86: Clean up csum-copy_64.S a bit x86: Fix common misspellings x86: Fix misspelling and align params x86: Use PentiumPro-optimized partial_csum() on VIA C7
| * x86, dumpstack: Correct stack dump info when frame pointer is availableNamhyung Kim2011-03-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current stack dump code scans entire stack and check each entry contains a pointer to kernel code. If CONFIG_FRAME_POINTER=y it could mark whether the pointer is valid or not based on value of the frame pointer. Invalid entries could be preceded by '?' sign. However this was not going to happen because scan start point was always higher than the frame pointer so that they could not meet. Commit 9c0729dc8062 ("x86: Eliminate bp argument from the stack tracing routines") delayed bp acquisition point, so the bp was read in lower frame, thus all of the entries were marked invalid. This patch fixes this by reverting above commit while retaining stack_frame() helper as suggested by Frederic Weisbecker. End result looks like below: before: [ 3.508329] Call Trace: [ 3.508551] [<ffffffff814f35c9>] ? panic+0x91/0x199 [ 3.508662] [<ffffffff814f3739>] ? printk+0x68/0x6a [ 3.508770] [<ffffffff81a981b2>] ? mount_block_root+0x257/0x26e [ 3.508876] [<ffffffff81a9821f>] ? mount_root+0x56/0x5a [ 3.508975] [<ffffffff81a98393>] ? prepare_namespace+0x170/0x1a9 [ 3.509216] [<ffffffff81a9772b>] ? kernel_init+0x1d2/0x1e2 [ 3.509335] [<ffffffff81003894>] ? kernel_thread_helper+0x4/0x10 [ 3.509442] [<ffffffff814f6880>] ? restore_args+0x0/0x30 [ 3.509542] [<ffffffff81a97559>] ? kernel_init+0x0/0x1e2 [ 3.509641] [<ffffffff81003890>] ? kernel_thread_helper+0x0/0x10 after: [ 3.522991] Call Trace: [ 3.523351] [<ffffffff814f35b9>] panic+0x91/0x199 [ 3.523468] [<ffffffff814f3729>] ? printk+0x68/0x6a [ 3.523576] [<ffffffff81a981b2>] mount_block_root+0x257/0x26e [ 3.523681] [<ffffffff81a9821f>] mount_root+0x56/0x5a [ 3.523780] [<ffffffff81a98393>] prepare_namespace+0x170/0x1a9 [ 3.523885] [<ffffffff81a9772b>] kernel_init+0x1d2/0x1e2 [ 3.523987] [<ffffffff81003894>] kernel_thread_helper+0x4/0x10 [ 3.524228] [<ffffffff814f6880>] ? restore_args+0x0/0x30 [ 3.524345] [<ffffffff81a97559>] ? kernel_init+0x0/0x1e2 [ 3.524445] [<ffffffff81003890>] ? kernel_thread_helper+0x0/0x10 -v5: * fix build breakage with oprofile -v4: * use 0 instead of regs->bp * separate out printk changes -v3: * apply comment from Frederic * add a couple of printk fixes Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Soren Sandmann <ssp@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <1300416006-3163-1-git-send-email-namhyung@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | Kill off warning: ‘inline’ is not at beginning of declarationJesper Juhl2011-01-19
|/ | | | | | | | | | | | | | | | Fix a bunch of warning: ‘inline’ is not at beginning of declaration messages when building a 'make allyesconfig' kernel with -Wextra. These warnings are trivial to kill, yet rather annoying when building with -Wextra. The more we can cut down on pointless crap like this the better (IMHO). A previous patch to do this for a 'allnoconfig' build has already been merged. This just takes the cleanup a little further. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds2011-01-11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits) perf session: Fix infinite loop in __perf_session__process_events perf evsel: Support perf_evsel__open(cpus > 1 && threads > 1) perf sched: Use PTHREAD_STACK_MIN to avoid pthread_attr_setstacksize() fail perf tools: Emit clearer message for sys_perf_event_open ENOENT return perf stat: better error message for unsupported events perf sched: Fix allocation result check perf, x86: P4 PMU - Fix unflagged overflows handling dynamic debug: Fix build issue with older gcc tracing: Fix TRACE_EVENT power tracepoint creation tracing: Fix preempt count leak tracepoint: Add __rcu annotation tracing: remove duplicate null-pointer check in skb tracepoint tracing/trivial: Add missing comma in TRACE_EVENT comment tracing: Include module.h in define_trace.h x86: Save rbp in pt_regs on irq entry x86, dumpstack: Fix unused variable warning x86, NMI: Clean-up default_do_nmi() x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPU x86, NMI: Remove DIE_NMI_IPI x86, NMI: Add priorities to handlers ...
| * Merge branch 'tip/perf/core' of ↵Ingo Molnar2011-01-09
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent
| * | x86, NMI: Remove DIE_NMI_IPIDon Zickus2011-01-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With priorities in place and no one really understanding the difference between DIE_NMI and DIE_NMI_IPI, just remove DIE_NMI_IPI and convert everyone to DIE_NMI. This also simplifies default_do_nmi() a little bit. Instead of calling the die_notifier in both the if and else part, just pull it out and call it before the if-statement. This has the side benefit of avoiding a call to the ioport to see if there is an external NMI sitting around until after the (more frequent) internal NMIs are dealt with. Patch-Inspired-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-5-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | x86, NMI: Add priorities to handlersDon Zickus2011-01-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to consolidate the NMI die_chain events, we need to setup the priorities for the die notifiers. I started by defining a bunch of common priorities that can be used by the notifier blocks. Then I modified the notifier blocks to use the newly created priorities. Now that the priorities are straightened out, it should be easier to remove the event DIE_NMI_IPI. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-4-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | Merge branch 'for-2.6.38' of ↵Linus Torvalds2011-01-07
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (30 commits) gameport: use this_cpu_read instead of lookup x86: udelay: Use this_cpu_read to avoid address calculation x86: Use this_cpu_inc_return for nmi counter x86: Replace uses of current_cpu_data with this_cpu ops x86: Use this_cpu_ops to optimize code vmstat: User per cpu atomics to avoid interrupt disable / enable irq_work: Use per cpu atomics instead of regular atomics cpuops: Use cmpxchg for xchg to avoid lock semantics x86: this_cpu_cmpxchg and this_cpu_xchg operations percpu: Generic this_cpu_cmpxchg() and this_cpu_xchg support percpu,x86: relocate this_cpu_add_return() and friends connector: Use this_cpu operations xen: Use this_cpu_inc_return taskstats: Use this_cpu_ops random: Use this_cpu_inc_return fs: Use this_cpu_inc_return in buffer.c highmem: Use this_cpu_xx_return() operations vmstat: Use this_cpu_inc_return for vm statistics x86: Support for this_cpu_add, sub, dec, inc_return percpu: Generic support for this_cpu_add, sub, dec, inc_return ... Fixed up conflicts: in arch/x86/kernel/{apic/nmi.c, apic/x2apic_uv_x.c, process.c} as per Tejun.
| * | x86: Replace uses of current_cpu_data with this_cpu opsTejun Heo2010-12-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace all uses of current_cpu_data with this_cpu operations on the per cpu structure cpu_info. The scala accesses are replaced with the matching this_cpu ops which results in smaller and more efficient code. In the long run, it might be a good idea to remove cpu_data() macro too and use per_cpu macro directly. tj: updated description Cc: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
| * | x86: Use this_cpu_ops to optimize codeTejun Heo2010-12-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Go through x86 code and replace __get_cpu_var and get_cpu_var instances that refer to a scalar and are not used for address determinations. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* | | Merge branch 'x86-mce-for-linus' of ↵Linus Torvalds2011-01-06
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: apic, amd: Make firmware bug messages more meaningful mce, amd: Remove goto in threshold_create_device() mce, amd: Add helper functions to setup APIC mce, amd: Shorten local variables mci_misc_{hi,lo} mce, amd: Implement mce_threshold_block_init() helper function
| * | apic, amd: Make firmware bug messages more meaningfulRobert Richter2010-10-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This improves error messages in case the BIOS was setting up wrong LVT offsets. Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <1288015419-29543-6-git-send-email-robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | Merge commit 'v2.6.37' into perf/coreIngo Molnar2011-01-05
|\ \ \ | | | | | | | | | | | | | | | | | | | | Merge reason: Add the final .37 tree. Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | arch/x86/oprofile/op_model_amd.c: Perform initialisation on a single CPURobert Richter2011-01-03
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disable preemption in init_ibs(). The function only checks the ibs capabilities and sets up pci devices (if necessary). It runs only on one cpu but operates with the local APIC and some MSRs, thus it is better to disable preemption. [ 7.034377] BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/483 [ 7.034385] caller is setup_APIC_eilvt+0x155/0x180 [ 7.034389] Pid: 483, comm: modprobe Not tainted 2.6.37-rc1-20101110+ #1 [ 7.034392] Call Trace: [ 7.034400] [<ffffffff812a2b72>] debug_smp_processor_id+0xd2/0xf0 [ 7.034404] [<ffffffff8101e985>] setup_APIC_eilvt+0x155/0x180 [ ... ] Addresses https://bugzilla.kernel.org/show_bug.cgi?id=22812 Reported-by: <atswartz@gmail.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: oprofile-list@lists.sourceforge.net <oprofile-list@lists.sourceforge.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Dan Carpenter <error27@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@kernel.org> [2.6.37.x] LKML-Reference: <20110103111514.GM4739@erda.amd.com> [ small cleanups ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | Merge branch 'core' of ↵Ingo Molnar2010-12-30
|\ \ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/core
| * | | oprofile, x86: Add support for 6 counters (AMD family 15h)Robert Richter2010-12-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for up to 6 hardware counters for AMD family 15h cpus. There is a new MSR range for hardware counters beginning at MSRC001_0200 Performance Event Select (PERF_CTL0). Signed-off-by: Robert Richter <robert.richter@amd.com>
| * | | oprofile, x86: Add support for AMD family 15hRobert Richter2010-12-19
| |/ / | | | | | | | | | | | | | | | | | | This patch adds support for AMD family 15h (Interlagos/Valencia/ Zambezi) cpus. Signed-off-by: Robert Richter <robert.richter@amd.com>
* | | x86, nmi_watchdog: Remove ARCH_HAS_NMI_WATCHDOG and rely on ↵Don Zickus2010-12-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_HARDLOCKUP_DETECTOR The x86 arch has shifted its use of the nmi_watchdog from a local implementation to the global one provide by kernel/watchdog.c. This shift has caused a whole bunch of compile problems under different config options. I attempt to simplify things with the patch below. In order to simplify things, I had to come to terms with the meaning of two terms ARCH_HAS_NMI_WATCHDOG and CONFIG_HARDLOCKUP_DETECTOR. Basically they mean the same thing, the former on a local level and the latter on a global level. With the old x86 nmi watchdog gone, there is no need to rely on defining the ARCH_HAS_NMI_WATCHDOG variable because it doesn't make sense any more. x86 will now use the global implementation. The changes below do a few things. First it changes the few places that relied on ARCH_HAS_NMI_WATCHDOG to use CONFIG_X86_LOCAL_APIC (the former was an alias for the latter anyway, so nothing unusual here). Those pieces of code were relying more on local apic functionality the nmi watchdog functionality, so the change should make sense. Second, I removed the x86 implementation of touch_nmi_watchdog(). It isn't need now, instead x86 will rely on kernel/watchdog.c's implementation. Third, I removed the #define ARCH_HAS_NMI_WATCHDOG itself from x86. And tweaked the include/linux/nmi.h file to tell users to look for an externally defined touch_nmi_watchdog in the case of ARCH_HAS_NMI_WATCHDOG _or_ CONFIG_HARDLOCKUP_DETECTOR. This changes removes some of the ugliness in that file. Finally, I added a Kconfig dependency for CONFIG_HARDLOCKUP_DETECTOR that said you can't have ARCH_HAS_NMI_WATCHDOG _and_ CONFIG_HARDLOCKUP_DETECTOR. You can only have one nmi_watchdog. Tested with ARCH=i386: allnoconfig, defconfig, allyesconfig, (various broken configs) ARCH=x86_64: allnoconfig, defconfig, allyesconfig, (various broken configs) Hopefully, after this patch I won't get any more compile broken emails. :-) v3: changed a couple of 'linux/nmi.h' -> 'asm/nmi.h' to pick-up correct function prototypes when CONFIG_HARDLOCKUP_DETECTOR is not set. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: fweisbec@gmail.com LKML-Reference: <1293044403-14117-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | Merge branch 'perf/core' of ↵Ingo Molnar2010-11-18
|\ \ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core
| * | | x86: Eliminate bp argument from the stack tracing routinesSoeren Sandmann Pedersen2010-11-18
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The various stack tracing routines take a 'bp' argument in which the caller is supposed to provide the base pointer to use, or 0 if doesn't have one. Since bp is garbage whenever CONFIG_FRAME_POINTER is not defined, this means all callers in principle should either always pass 0, or be conditional on CONFIG_FRAME_POINTER. However, there are only really three use cases for stack tracing: (a) Trace the current task, including IRQ stack if any (b) Trace the current task, but skip IRQ stack (c) Trace some other task In all cases, if CONFIG_FRAME_POINTER is not defined, bp should just be 0. If it _is_ defined, then - in case (a) bp should be gotten directly from the CPU's register, so the caller should pass NULL for regs, - in case (b) the caller should should pass the IRQ registers to dump_trace(), - in case (c) bp should be gotten from the top of the task's stack, so the caller should pass NULL for regs. Hence, the bp argument is not necessary because the combination of task and regs is sufficient to determine an appropriate value for bp. This patch introduces a new inline function stack_frame(task, regs) that computes the desired bp. This function is then called from the two versions of dump_stack(). Signed-off-by: Soren Sandmann <ssp@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arjan van de Ven <arjan@infradead.org>, Cc: Frederic Weisbecker <fweisbec@gmail.com>, Cc: Arnaldo Carvalho de Melo <acme@redhat.com>, LKML-Reference: <m3oc9rop28.fsf@dhcp-100-3-82.bos.redhat.com>> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
* / / x86, nmi_watchdog: Remove all stub function calls from old nmi_watchdogDon Zickus2010-11-18
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the bulk of the old nmi_watchdog is gone, remove all the stub variables and hooks associated with it. This touches lots of files mainly because of how the io_apic nmi_watchdog was implemented. Now that the io_apic nmi_watchdog is forever gone, remove all its fingers. Most of this code was not being exercised by virtue of nmi_watchdog != NMI_IO_APIC, so there shouldn't be anything to risky here. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: fweisbec@gmail.com Cc: gorcunov@openvz.org LKML-Reference: <1289578944-28564-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | Merge branch 'x86' of ↵Ingo Molnar2010-10-25
|\ \ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
| * | Merge branch 'oprofile/core' into oprofile/x86Robert Richter2010-10-25
| |\| | | | | | | | | | | | | | | | | | | Conflicts: arch/x86/oprofile/op_model_amd.c Signed-off-by: Robert Richter <robert.richter@amd.com>
| * | oprofile, x86: Add support for IBS periodic op counter extensionRobert Richter2010-10-15
| | | | | | | | | | | | | | | | | | | | | | | | The count value for IBS op sampling has been extended by 7 bits. The feature is reflected in bit 6 (OpCntExt) of the IBS capability register (CPUID Fn8000_001B_EAX). Signed-off-by: Robert Richter <robert.richter@amd.com>
| * | oprofile, x86: Add support for IBS branch target address reportingRobert Richter2010-10-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for IBS branch target address reporting. A new MSR (MSRC001_103B IBS Branch Target Address) has been added that provides the logical address in canonical form for the branch target. The size of the IBS sample that is transferred to the userland has been increased. For backward compatibility, the userland daemon must explicit enable the feature by writing to the oprofilefs file ibs_op/branch_target After enabling branch target address reporting, the userland daemon must handle the extended size of the IBS sample. Signed-off-by: Robert Richter <robert.richter@amd.com>
| * | oprofile, x86: Introduce struct ibs_stateRobert Richter2010-10-15
| | | | | | | | | | | | | | | | | | | | | This patch introduces struct ibs_state that will extended by additinal members in follow-on patches. Signed-off-by: Robert Richter <robert.richter@amd.com>
| * | oprofile, x86: Remove duplicate check for IBS_CAPS_OPCNTRobert Richter2010-10-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | Since oprofile is setting up ibs_op/dispatched_ops in the fs only if the feature is available, its corresponding variable ibs_config.dispatched_ops is only set, if the feature is available. Thus the check is duplicate and can be removed. Signed-off-by: Robert Richter <robert.richter@amd.com>
| * | oprofile, x86: Check IBS capability bits 1 and 2Robert Richter2010-10-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are IBS CPUID feature flags in CPUID Fn8000_001B to detect if the cpu supports IBS fetch sampling (FetchSam) and/or IBS execution sampling (OpSam). This patch adds checks if the both features are available. Spec: http://support.amd.com/us/Processor_TechDocs/31116.pdf Signed-off-by: Robert Richter <robert.richter@amd.com>
| * | oprofile, x86: Add support for AMD family 14hRobert Richter2010-10-15
| | | | | | | | | | | | | | | | | | This patch adds support for AMD family 14h (Ontario/Zacate) cpus. Signed-off-by: Robert Richter <robert.richter@amd.com>
| * | oprofile, x86: Add support for AMD family 12hRobert Richter2010-10-15
| | | | | | | | | | | | | | | | | | This patch adds support for AMD family 12h (Llano) cpus. Signed-off-by: Robert Richter <robert.richter@amd.com>
* | | x86/oprofile: Fix uninitialized variable use in debug printkIngo Molnar2010-10-25
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Stephen Rothwell reported this build warning: arch/x86/oprofile/op_model_amd.c: In function 'ibs_eilvt_valid': arch/x86/oprofile/op_model_amd.c:289: warning: 'offset' may be used uninitialized in this function And correctly observed that indeed the variable is used uninitialized in this function. The result of this bug can be a debug printk with a bogus value. Also fix a few more small details that made this function hard to read and which probably contributed to the bug being introduced to begin with: - Use more symmetric error conditions - Remove the !0 obfuscation - Add newlines to the printk output - Remove bogus linebreaks in printk strings and elsewhere Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Robert Richter <robert.richter@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20101025115736.41d51abe.sfr@canb.auug.org.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | Merge branch 'irq-core-for-linus' of ↵Linus Torvalds2010-10-21
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (96 commits) apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsets apic, x86: Check if EILVT APIC registers are available (AMD only) x86: ioapic: Call free_irte only if interrupt remapping enabled arm: Use ARCH_IRQ_INIT_FLAGS genirq, ARM: Fix boot on ARM platforms genirq: Fix CONFIG_GENIRQ_NO_DEPRECATED=y build x86: Switch sparse_irq allocations to GFP_KERNEL genirq: Switch sparse_irq allocator to GFP_KERNEL genirq: Make sparse_lock a mutex x86: lguest: Use new irq allocator genirq: Remove the now unused sparse irq leftovers genirq: Sanitize dynamic irq handling genirq: Remove arch_init_chip_data() x86: xen: Sanitise sparse_irq handling x86: Use sane enumeration x86: uv: Clean up the direct access to irq_desc x86: Make io_apic.c local functions static genirq: Remove irq_2_iommu x86: Speed up the irq_remapped check in hot pathes intr_remap: Simplify the code further ... Fix up trivial conflicts in arch/x86/Kconfig
| * apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsetsRobert Richter2010-10-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We want the BIOS to setup the EILVT APIC registers. The offsets were hardcoded and BIOS settings were overwritten by the OS. Now, the subsystems for MCE threshold and IBS determine the LVT offset from the registers the BIOS has setup. If the BIOS setup is buggy on a family 10h system, a workaround enables IBS. If the OS determines an invalid register setup, a "[Firmware Bug]: " error message is reported. We need this change also for upcomming cpu families. Signed-off-by: Robert Richter <robert.richter@amd.com> LKML-Reference: <1286360874-1471-3-git-send-email-robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | oprofile, x86: Simplify init/exit functionsRobert Richter2010-10-01
| | | | | | | | | | | | | | | | | | | | | | Now, that we only call the exit function if init succeeds with commit: 979048e oprofile: don't call arch exit code from init code on failure we can simplify the x86 init/exit functions too. Variable using_nmi becomes obsolete. Signed-off-by: Robert Richter <robert.richter@amd.com>
* | oprofile, x86: Adding backtrace dump for 32bit process in compat modeJiri Olsa2010-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements the oprofile backtrace generation for 32 bit applications running in the 64bit environment (compat mode). With this change it's possible to get backtrace for 32bits applications under the 64bits environment using oprofile's callgraph options. opcontrol --setup -c ... opreport -l -cg ... Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
* | oprofile, x86: Using struct stack_frame for 64bit processes dumpJiri Olsa2010-10-01
|/ | | | | | | | | | | Removing unnecessary struct frame_head and replacing it with struct stack_frame. The struct stack_frame is already defined and used in other places in kernel, so there's no reason to define new structure. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
* oprofile: Add Support for Intel CPU Family 6 / Model 29Jiri Olsa2010-09-21
| | | | | | | | | | | | | | | | | | This patch adds CPU type detection for dunnington processor (Family 6 / Model 29) to be identified as core 2 family cpu type (wikipedia source). I tested oprofile on Intel(R) Xeon(R) CPU E7440 reporting itself as model 29, and it runs without an issue. Spec: http://www.intel.com/Assets/en_US/PDF/specupdate/320336.pdf Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
* oprofile: Add Support for Intel CPU Family 6 / Model 22 (Intel Celeron 540)Patrick Simmons2010-09-16
| | | | | | | | | | | | | | | | | | | This patch adds CPU type detection for the Intel Celeron 540, which is part of the Core 2 family according to Wikipedia; the family and ID pair is absent from the Volume 3B table referenced in the source code comments. I have tested this patch on an Intel Celeron 540 machine reporting itself as Family 6 Model 22, and OProfile runs on the machine without issue. Spec: http://download.intel.com/design/mobile/SPECUPDT/317667.pdf Signed-off-by: Patrick Simmons <linuxrocks123@netscape.net> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
* oprofile, x86: fix init_sysfs() function stubRobert Richter2010-09-01
| | | | | | | | | | | | | | | | | | | The use of the return value of init_sysfs() with commit 10f0412 oprofile, x86: fix init_sysfs error handling discovered the following build error for !CONFIG_PM: .../linux/arch/x86/oprofile/nmi_int.c: In function ‘op_nmi_init’: .../linux/arch/x86/oprofile/nmi_int.c:784: error: expected expression before ‘do’ make[2]: *** [arch/x86/oprofile/nmi_int.o] Error 1 make[1]: *** [arch/x86/oprofile] Error 2 This patch fixes this. Reported-by: Ingo Molnar <mingo@elte.hu> Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
* oprofile, x86: fix init_sysfs error handlingRobert Richter2010-08-31
| | | | | | | | | On failure init_sysfs() might not properly free resources. The error code of the function is not checked. And, when reinitializing the exit function might be called twice. This patch fixes all this. Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
* oprofile: add support for Intel processor model 30Josh Hunt2010-08-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Newer Intel processors identifying themselves as model 30 are not recognized by oprofile. <cpuinfo snippet> model : 30 model name : Intel(R) Xeon(R) CPU X3470 @ 2.93GHz </cpuinfo snippet> Running oprofile on these machines gives the following: + opcontrol --init + opcontrol --list-events oprofile: available events for CPU type "Intel Architectural Perfmon" See Intel 64 and IA-32 Architectures Software Developer's Manual Volume 3B (Document 253669) Chapter 18 for architectural perfmon events This is a limited set of fallback events because oprofile doesn't know your CPU CPU_CLK_UNHALTED: (counter: all) Clock cycles when not halted (min count: 6000) INST_RETIRED: (counter: all) number of instructions retired (min count: 6000) LLC_MISSES: (counter: all) Last level cache demand requests from this core that missed the LLC (min count: 6000) Unit masks (default 0x41) ---------- 0x41: No unit mask LLC_REFS: (counter: all) Last level cache demand requests from this core (min count: 6000) Unit masks (default 0x4f) ---------- 0x4f: No unit mask BR_MISS_PRED_RETIRED: (counter: all) number of mispredicted branches retired (precise) (min count: 500) + opcontrol --shutdown Tested using oprofile 0.9.6. Signed-off-by: Josh Hunt <johunt@akamai.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
* Merge remote branch 'tip/perf/urgent' into oprofile/urgentRobert Richter2010-06-04
|\
| * Merge branch 'perf-core-for-linus' of ↵Linus Torvalds2010-05-18
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (311 commits) perf tools: Add mode to build without newt support perf symbols: symbol inconsistency message should be done only at verbose=1 perf tui: Add explicit -lslang option perf options: Type check all the remaining OPT_ variants perf options: Type check OPT_BOOLEAN and fix the offenders perf options: Check v type in OPT_U?INTEGER perf options: Introduce OPT_UINTEGER perf tui: Add workaround for slang < 2.1.4 perf record: Fix bug mismatch with -c option definition perf options: Introduce OPT_U64 perf tui: Add help window to show key associations perf tui: Make <- exit menus too perf newt: Add single key shortcuts for zoom into DSO and threads perf newt: Exit browser unconditionally when CTRL+C, q or Q is pressed perf newt: Fix the 'A'/'a' shortcut for annotate perf newt: Make <- exit the ui_browser x86, perf: P4 PMU - fix counters management logic perf newt: Make <- zoom out filters perf report: Report number of events, not samples perf hist: Clarify events_stats fields usage ... Fix up trivial conflicts in kernel/fork.c and tools/perf/builtin-record.c
| | * perf, x86: Undo some some *_counter* -> *_event* renamesRobert Richter2010-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The big rename: cdd6c48 perf: Do the big rename: Performance Counters -> Performance Events accidentally renamed some members of stucts that were named after registers in the spec. To avoid confusion this patch reverts some changes. The related specs are MSR descriptions in AMD's BKDGs and the ARCHITECTURAL PERFORMANCE MONITORING section in the Intel 64 and IA-32 Architectures Software Developer's Manuals. This patch does: $ sed -i -e 's:num_events:num_counters:g' \ arch/x86/include/asm/perf_event.h \ arch/x86/kernel/cpu/perf_event_amd.c \ arch/x86/kernel/cpu/perf_event.c \ arch/x86/kernel/cpu/perf_event_intel.c \ arch/x86/kernel/cpu/perf_event_p6.c \ arch/x86/kernel/cpu/perf_event_p4.c \ arch/x86/oprofile/op_model_ppro.c $ sed -i -e 's:event_bits:cntval_bits:g' -e 's:event_mask:cntval_mask:g' \ arch/x86/kernel/cpu/perf_event_amd.c \ arch/x86/kernel/cpu/perf_event.c \ arch/x86/kernel/cpu/perf_event_intel.c \ arch/x86/kernel/cpu/perf_event_p6.c \ arch/x86/kernel/cpu/perf_event_p4.c Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1269880612-25800-2-git-send-email-robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | Oprofile: Change CPUIDS from decimal to hex, and add some commentsJohn Villalovos2010-05-10
|/ / | | | | | | | | | | | | | | | | | | | | | | | | Back when the patch was submitted for "Add Xeon 7500 series support to oprofile", Robert Richter had asked for a followon patch that converted all the CPU ID values to hex. I have done that here for the "i386/core_i7" and "i386/atom" class processors in the ppro_init() function and also added some comments on where to find documentation on the Intel processors. Signed-off-by: John L. Villalovos <john.l.villalovos@intel.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
* | oprofile/x86: make AMD IBS hotplug capableRobert Richter2010-05-06
| | | | | | | | | | | | | | | | | | | | | | | | Current IBS code is not hotplug capable. An offline cpu might not be initialized or deinitialized properly. This patch fixes this by removing on_each_cpu() functions. The IBS init/deinit code is executed in the per-cpu functions model->setup_ctrs() and model->cpu_down() which are also called by hotplug notifiers. model->cpu_down() replaces model->exit() that became obsolete. Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Robert Richter <robert.richter@amd.com>
* | oprofile/x86: notify cpus only when daemon is runningRobert Richter2010-05-06
| | | | | | | | | | | | | | | | | | | | This patch moves the cpu notifier registration from nmi_init() to nmi_setup(). The corresponding unregistration function is now in nmi_shutdown(). Thus, the hotplug code is only active, if the oprofile daemon is running. Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Robert Richter <robert.richter@amd.com>
* | oprofile/x86: reordering some functionsRobert Richter2010-05-04
| | | | | | | | | | | | | | | | Reordering some functions. Necessary for the next patch. No functional changes. Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Robert Richter <robert.richter@amd.com>
* | oprofile/x86: stop disabled counters in nmi handlerRobert Richter2010-05-04
| | | | | | | | | | | | | | | | | | | | This patch adds checks to the nmi handler. Now samples are only generated and counters reenabled, if the counters are running. Otherwise the counters are stopped, if oprofile is using the nmi. In other cases it will ignore the nmi notification. Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Robert Richter <robert.richter@amd.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-15 14:59:12 -0500