aboutsummaryrefslogtreecommitdiffstats
path: root/arch/ppc
Commit message (Collapse)AuthorAge
* powerpc: Fix various syscall/signal/swapcontext bugsPaul Mackerras2006-03-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A careful reading of the recent changes to the system call entry/exit paths revealed several problems, plus some things that could be simplified and improved: * 32-bit wasn't testing the _TIF_NOERROR bit in the syscall fast exit path, so it was only doing anything with it once it saw some other bit being set. In other words, the noerror behaviour would apply to the next system call where we had to reschedule or deliver a signal, which is not necessarily the current system call. * 32-bit wasn't doing the call to ptrace_notify in the syscall exit path when the _TIF_SINGLESTEP bit was set. * _TIF_RESTOREALL was in both _TIF_USER_WORK_MASK and _TIF_PERSYSCALL_MASK, which is odd since _TIF_RESTOREALL is only set by system calls. I took it out of _TIF_USER_WORK_MASK. * On 64-bit, _TIF_RESTOREALL wasn't causing the non-volatile registers to be restored (unless perhaps a signal was delivered or the syscall was traced or single-stepped). Thus the non-volatile registers weren't restored on exit from a signal handler. We probably got away with it mostly because signal handlers written in C wouldn't alter the non-volatile registers. * On 32-bit I simplified the code and made it more like 64-bit by making the syscall exit path jump to ret_from_except to handle preemption and signal delivery. * 32-bit was calling do_signal unnecessarily when _TIF_RESTOREALL was set - but I think because of that 32-bit was actually restoring the non-volatile registers on exit from a signal handler. * I changed the order of enabling interrupts and saving the non-volatile registers before calling do_syscall_trace_leave; now we enable interrupts first. Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: fix altivec_unavailable_exception OopsesAlan Curry2006-02-23
| | | | | | | | | | | | | altivec_unavailable_exception is called without setting r3... it looks like the r3 that actually gets passed in as struct pt_regs *regs is the undisturbed value of r3 at the time the altivec instruction was encountered. The user actually gets to choose the pt_regs printed in the Oops! This fixes the oops by passing the correct pt_regs pointer to altivec_unavailable_exception. Signed-off-by: Alan Curry <pacman@TheWorld.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ppc: fix adb breakage in xmonOlaf Hering2006-02-23
| | | | | | | | Fix up xmon compilation after the last change. Remove lots of dead code, all the pmac and chrp support is in arch/powerpc Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: remove duplicate exportsOlaf Hering2006-02-19
| | | | | | | | | | | | | | | | | | | | | | A few symbols are exported twice, remove them from ppc_ksyms.c Remove users of sys_ctrler in arch/ppc/ WARNING: vmlinux: duplicate symbol '__delay' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol '__up' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol '__down' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol '__down_interruptible' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'sys_ctrler' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strncat' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strncmp' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strchr' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strrchr' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strnlen' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strpbrk' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'memscan' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strstr' previous definition was in vmlinux Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
* ppc: Use the system call table from arch/powerpc/kernel/systbl.SPaul Mackerras2006-02-10
| | | | | | | With this, new system calls only have to be wired up in one place for ARCH=ppc and ARCH=powerpc, rather than 2. Signed-off-by: Paul Mackerras <paulus@samba.org>
* Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2006-02-08
|\
| * [SERIAL] uart_port flags member should use UPF_*Russell King2006-02-05
| | | | | | | | | | | | Convert usage of ASYNC_* to UPF_*. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [SERIAL] uart_port iotype member should use UPIO_*Russell King2006-02-05
| | | | | | | | | | | | Convert usage of SERIAL_IO_* to UPIO_*. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds2006-02-07
|\ \
| * | [PATCH] powerpc/8xx: last two 8MB D-TLB entries are incorrectly setMarcelo Tosatti2006-02-07
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The last two 8MB TLB entries are being incorrectly set by initial_mmu on 8xx. The first entry is written with the same virtual/physical address, which renders it invalid: BDI>rms 792 0x00001e00 BDI>rms 824 1 BDI>rds 824 SPR 824 : 0xc08000c0 -1065353024 BDI>rds 825 SPR 825 : 0xc0800de0 -1065349664 BDI>rds 826 SPR 826 : 0x00000000 0 And the second entry, in addition, does not have its TLB index set correctly. Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | [PATCH] ppc: last_task_.... is defined only on non-SMPAl Viro2006-02-07
| | | | | | | | | | | | ... so it should be exported only on non-SMP. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | [PATCH] fix breakage in ocp.cAl Viro2006-02-07
|/ | | | | | it's ocp_device_...., not ocp_driver_.... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* [PATCH] mv643xx_eth: Fix for building as a moduleDale Farnsworth2006-01-27
| | | | | | | | Enable mv643xx_eth driver to work when built as a module on mv64x60-based embedded systems. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] e1000: Added disable packet split capabilityJesse Brandeburg2006-01-18
| | | | | | | | | Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware. Made this a CONFIG option and modified the Kconfig, to reflect the new option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* powerpc/32: Restore previous version of 32-bit PCI codePaul Mackerras2006-01-15
| | | | | | | | | When I removed the powermac support from arch/ppc/kernel/pci.c, I overlooked the fact that that file is used in 32-bit ARCH=powerpc builds. To prevent problems in future, restore the original version of that file as arch/powerpc/kernel/pci_32.c, and use that. Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ppc: Remove powermac support from ARCH=ppcPaul Mackerras2006-01-15
| | | | | | | | | | | This makes it possible to build kernels for PReP and/or CHRP with ARCH=ppc by removing the (non-building) powermac support. It's now also possible to select PReP and CHRP independently. Powermac users should now build with ARCH=powerpc instead of ARCH=ppc. (This does mean that it is no longer possible to build a 32-bit kernel for a G5.) Signed-off-by: Paul Mackerras <paulus@samba.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds2006-01-14
|\
| * [PATCH] Add ocp_bus_type probe and remove methodsRussell King2006-01-13
| | | | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] remove unused tmp_buf_sem'sAdrian Bunk2006-01-14
| | | | | | | | | | | | | | | | tmp_buf_sem sems to be a common name for something completely unused... Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> ("usb portion") Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | ppc: Remove duplicate export of get_wchanPaul Mackerras2006-01-13
| | | | | | | | | | | | | | | | | | | | The arch/powerpc version of process.c exports get_wchan itself. When I moved ARCH=ppc over to using arch/powerpc/kernel/process.c the get_wchan export in arch/ppc/kernel/ppc_ksyms.c became redundant, so remove it. Signed-off-by: Paul Mackerras <paulus@samba.org> (cherry picked from 9871166ad692121d6b944159ef3f053570158ea8 commit)
* | [PATCH] powerpc/8xx: Use 8MB D-TLB's for kernel static mapping faultsMarcelo Tosatti2006-01-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following implements support for instantiation of 8MB D-TLB entries for the kernel direct virtual mapping on 8xx, thus reducing TLB space consumed for the kernel. Test used: writing 40MB from /dev/zero to file in ext2fs over RAMDISK. $ time dd if=/dev/zero of=file bs=4k count=10000 VANILLA 8MB kernel data pages real 0m11.485s real 0m11.267s user 0m0.218s user 0m0.250s sys 0m8.939s sys 0m9.108s real 0m11.518s real 0m10.978s user 0m0.203s user 0m0.222s sys 0m9.585s sys 0m9.138s real 0m11.554s real 0m10.967s user 0m0.228s user 0m0.222s sys 0m9.497s sys 0m9.127s real 0m11.633s real 0m11.286s user 0m0.214s user 0m0.196s sys 0m9.529s sys 0m9.134s and averages for both: real 11.54750 real 11.12450 Which is a 3.6% improvement in execution time. More improvement is expected for loads with larger kernel data footprint (real workloads). Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | [PATCH] powerpc: Updated platforms that use gianfar to match driverKumar Gala2006-01-13
|/ | | | | | | | | The gianfar driver changed how it required MDIO bus and phy id's to be passed to it. Also, it no longer passes the physical address of the MDIO bus. Instead we have a proper platform device. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds2006-01-12
|\ | | | | | | | | | | | | Fix up delete/modify conflict of arch/ppc/kernel/process.c by hand (it's gone, gone, gone). Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * powerpc: make ARCH=ppc use arch/powerpc/kernel/process.cPaul Mackerras2006-01-12
| | | | | | | | | | | | | | | | | | | | Commit 5388fb1025443ec223ba556b10efc4c5f83f8682 made signal_32.c use discard_lazy_cpu_state, which broke ARCH=ppc because that uses the common signal_32.c but has its own process.c. Make ARCH=ppc use the common process.c to fix this and to reduce the amount of duplicated code. Signed-off-by: Paul Mackerras <paulus@samba.org>
* | [PATCH] m68k: kill mach_floppy_setup, convert to proper __setup() in driversAl Viro2006-01-12
| | | | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] m68k: namespace pollution fix (custom->amiga_custom)Al Viro2006-01-12
| | | | | | | | | | | | | | | | | | | | in amigahw.h custom renamed to amiga_custom, in drivers with few instances the same replacement, in the rest - #define custom amiga_custom in driver itself Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] powerpc: task_stack_page()Al Viro2006-01-12
| | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] powerpc: task_thread_info()Al Viro2006-01-12
| | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] scheduler cache-hot-autodetectakpm@osdl.org2006-01-12
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ) From: Ingo Molnar <mingo@elte.hu> This is the latest version of the scheduler cache-hot-auto-tune patch. The first problem was that detection time scaled with O(N^2), which is unacceptable on larger SMP and NUMA systems. To solve this: - I've added a 'domain distance' function, which is used to cache measurement results. Each distance is only measured once. This means that e.g. on NUMA distances of 0, 1 and 2 might be measured, on HT distances 0 and 1, and on SMP distance 0 is measured. The code walks the domain tree to determine the distance, so it automatically follows whatever hierarchy an architecture sets up. This cuts down on the boot time significantly and removes the O(N^2) limit. The only assumption is that migration costs can be expressed as a function of domain distance - this covers the overwhelming majority of existing systems, and is a good guess even for more assymetric systems. [ People hacking systems that have assymetries that break this assumption (e.g. different CPU speeds) should experiment a bit with the cpu_distance() function. Adding a ->migration_distance factor to the domain structure would be one possible solution - but lets first see the problem systems, if they exist at all. Lets not overdesign. ] Another problem was that only a single cache-size was used for measuring the cost of migration, and most architectures didnt set that variable up. Furthermore, a single cache-size does not fit NUMA hierarchies with L3 caches and does not fit HT setups, where different CPUs will often have different 'effective cache sizes'. To solve this problem: - Instead of relying on a single cache-size provided by the platform and sticking to it, the code now auto-detects the 'effective migration cost' between two measured CPUs, via iterating through a wide range of cachesizes. The code searches for the maximum migration cost, which occurs when the working set of the test-workload falls just below the 'effective cache size'. I.e. real-life optimized search is done for the maximum migration cost, between two real CPUs. This, amongst other things, has the positive effect hat if e.g. two CPUs share a L2/L3 cache, a different (and accurate) migration cost will be found than between two CPUs on the same system that dont share any caches. (The reliable measurement of migration costs is tricky - see the source for details.) Furthermore i've added various boot-time options to override/tune migration behavior. Firstly, there's a blanket override for autodetection: migration_cost=1000,2000,3000 will override the depth 0/1/2 values with 1msec/2msec/3msec values. Secondly, there's a global factor that can be used to increase (or decrease) the autodetected values: migration_factor=120 will increase the autodetected values by 20%. This option is useful to tune things in a workload-dependent way - e.g. if a workload is cache-insensitive then CPU utilization can be maximized by specifying migration_factor=0. I've tested the autodetection code quite extensively on x86, on 3 P3/Xeon/2MB, and the autodetected values look pretty good: Dual Celeron (128K L2 cache): --------------------- migration cost matrix (max_cache_size: 131072, cpu: 467 MHz): --------------------- [00] [01] [00]: - 1.7(1) [01]: 1.7(1) - --------------------- cacheflush times [2]: 0.0 (0) 1.7 (1784008) --------------------- Here the slow memory subsystem dominates system performance, and even though caches are small, the migration cost is 1.7 msecs. Dual HT P4 (512K L2 cache): --------------------- migration cost matrix (max_cache_size: 524288, cpu: 2379 MHz): --------------------- [00] [01] [02] [03] [00]: - 0.4(1) 0.0(0) 0.4(1) [01]: 0.4(1) - 0.4(1) 0.0(0) [02]: 0.0(0) 0.4(1) - 0.4(1) [03]: 0.4(1) 0.0(0) 0.4(1) - --------------------- cacheflush times [2]: 0.0 (33900) 0.4 (448514) --------------------- Here it can be seen that there is no migration cost between two HT siblings (CPU#0/2 and CPU#1/3 are separate physical CPUs). A fast memory system makes inter-physical-CPU migration pretty cheap: 0.4 msecs. 8-way P3/Xeon [2MB L2 cache]: --------------------- migration cost matrix (max_cache_size: 2097152, cpu: 700 MHz): --------------------- [00] [01] [02] [03] [04] [05] [06] [07] [00]: - 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) [01]: 19.2(1) - 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) [02]: 19.2(1) 19.2(1) - 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) [03]: 19.2(1) 19.2(1) 19.2(1) - 19.2(1) 19.2(1) 19.2(1) 19.2(1) [04]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) - 19.2(1) 19.2(1) 19.2(1) [05]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) - 19.2(1) 19.2(1) [06]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) - 19.2(1) [07]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) - --------------------- cacheflush times [2]: 0.0 (0) 19.2 (19281756) --------------------- This one has huge caches and a relatively slow memory subsystem - so the migration cost is 19 msecs. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Cc: <wilder@us.ibm.com> Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] capable/capability.h (arch/)Randy Dunlap2006-01-11
| | | | | | | | arch: Use <linux/capability.h> where capable() is used. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] powerpc: Updated Kconfig and Makefiles for 83xx supportKumar Gala2006-01-10
| | | | | | | | | | | Updated Kconfig & Makefiles in prep for adding support for the Freescale MPC83xx family of processors to arch/powerpc. Moved around some config options that are more globally applicable to other PowerPC processors. Added a temporary config option (83xx) to match existing arch/ppc support for the MPC83xx line. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds2006-01-10
|\ | | | | | | Fix up some trivial conflicts in {i386|ia64}/Makefile
| * kbuild: remove GCC_VERSIONSam Ravnborg2006-01-08
| | | | | | | | | | | | | | | | | | | | | | This was causing some ordering problems. Remove the up-front evaluation and just revaluate the compiler version each time we need it. (The up-front evaluation was problematic because some architectures modify the value of $(CC)). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* | [PATCH] kdump: dynamic per cpu allocation of memory for saving cpu registersVivek Goyal2006-01-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - In case of system crash, current state of cpu registers is saved in memory in elf note format. So far memory for storing elf notes was being allocated statically for NR_CPUS. - This patch introduces dynamic allocation of memory for storing elf notes. It uses alloc_percpu() interface. This should lead to better memory usage. - Introduced based on Andi Kleen's and Eric W. Biederman's suggestions. - This patch also moves memory allocation for elf notes from architecture dependent portion to architecture independent portion. Now crash_notes is architecture independent. The whole idea is that size of memory to be allocated per cpu (MAX_NOTE_BYTES) can be architecture dependent and allocation of this memory can be architecture independent. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] PCI: pci_find_device remove (ppc/platforms/85xx/mpc85xx_cds_common.c)Jiri Slaby2006-01-09
| | | | | | | | | | | | Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] PCI: pci_find_device remove (ppc/kernel/pci.c)Jiri Slaby2006-01-09
| | | | | | | | | | | | | | | | Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> arch/ppc/kernel/pci.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds2006-01-09
|\ \
| * | [PATCH] ppc32: Put cache flush routines back into .relocate_code sectionPaul Janzen2006-01-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 2.6.14, we had the following definition of _GLOBAL() in include/asm-ppc/processor.h: #define _GLOBAL(n)\ .stabs __stringify(n:F-1),N_FUN,0,0,n;\ .globl n;\ n: In 2.6.15, as part of the great powerpc merge, we moved this definition to include/asm-powerpc/ppc_asm.h, where it appears (to 32-bit code) as: #define _GLOBAL(n) \ .text; \ .stabs __stringify(n:F-1),N_FUN,0,0,n;\ .globl n; \ n: Mostly, this is fine. However, we also have the following, in arch/ppc/boot/common/util.S: .section ".relocate_code","xa" [...] _GLOBAL(flush_instruction_cache) [...] _GLOBAL(flush_data_cache) [...] The addition of the .text section definition in the definition of _GLOBAL overrides the .relocate_code section definition. As a result, these two functions don't end up in .relocate_code, so they don't get relocated correctly, and the boot fails. There's another suspicious-looking usage at kernel/swsusp.S:37 that someone should look into. I did not exhaustively search the source tree, though. The following is the minimal patch that fixes the immediate problem. I could easily be convinced that the _GLOBAL definition should be modified to remove the ".text;" line either instead of, or in addition to, this fix. Signed-off-by: Paul Janzen <pcj@linux.sez.to> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [PATCH] powerpc: Fix compile problem in pci.c for ppc32Kumar Gala2006-01-08
| | | | | | | | | | | | | | | | | | | | | pci_address_to_pio is missing a closing curly brace Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [PATCH] powerpc: pci_address_to_pio fixBenjamin Herrenschmidt2006-01-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes pci_address_to_pio() to return an unsigned long (to be safe) and fixes a bug in the implementation that caused it to return a bogus IO port number Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [PATCH] powerpc: Detect prefetchable windows in pci_process_bridge_OF_rangesKumar Gala2006-01-08
| | | | | | | | | | | | | | | | | | | | | | | | Added the ability to determine if an outbound window in the PCI host controller is for prefetchable memory and report it as such. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [PATCH] ppc32: Add TQM85xx (8540/8541/8555/8560) board supportKumar Gala2006-01-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the TQ Components TQM85xx modules. Currently the modules TQM8540/8541/8555/8560 are supported. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [PATCH] ppc: removed unused variable i from code.Otavio Salvador2006-01-08
| | | | | | | | | | | | Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [PATCH] powerpc: Update OF address parsersBenjamin Herrenschmidt2006-01-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This updates the OF address parsers to return the IO flags indicating the type of address obtained. It also adds a PCI call for converting physical addresses that hit IO space into into IO tokens, and add routines that return the translated addresses into struct resource Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [PATCH] ppc: Make ARCH=ppc build again with new syscall pathDavid Woodhouse2006-01-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes ARCH=ppc build in your powerpc tree again, with the new syscall entry/exit path. Still doesn't actually boot on my Pegasos; the last thing I see is 'MMU:exit'. But at least it builds -- I'll look at why it doesn't boot later, so that I can see if the mv643xx_eth actually works with ARCH=ppc (it doesn't with ARCH=powerpc; two in every three packets I receive are offset by 4 bytes). Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [PATCH] ppc32: m8xx watchdog updateMarcelo Tosatti2006-01-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This updates m8xx_wdt as follows: 1) Remove now obsolete fpos check in the write() function. The driver is currently non functional due to this bug. 2) Use in/out macros for register access. 3) Allows m8xx_wdt to use a kernel timer instead of the builtin RTC/PIT for keep-alive trigger (which is responsible for servicing the watchdog until an userspace application takes over). For instance Cyclades PRxK boards (MPC 855T based) have a non-functional internal RTC/PIT unit. Behaviour for boards with RTC/PIT is unchaged. 4) The last change required moving the RTCSC register setting code to a weak function which can be overriden by board specific files. Otherwise the timer init code trashes the register making it impossible for m8xx_wdt to detect the situation. Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [PATCH] powerpc: Fix suboptimal uImage targetKumar Gala2006-01-08
| | | | | | | | | | | | | | | | | | | | | | | | Sam Ravnborg pointed out that calling if_changed was redundant in the rule since a prerequisite had to have changed for us to get there. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [PATCH] powerpc: Unify udbg (#2)Benjamin Herrenschmidt2006-01-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch unifies udbg for both ppc32 and ppc64 when building the merged achitecture. xmon now has a single "back end". The powermac udbg stuff gets enriched with some ADB capabilities and btext output. In addition, the early_init callback is now called on ppc32 as well, approx. in the same order as ppc64 regarding device-tree manipulations. The init sequences of ppc32 and ppc64 are getting closer, I'll unify them in a later patch. For now, you can force udbg to the scc using "sccdbg" or to btext using "btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg output to something else than the autodetected OF output device in a later patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [PATCH] powerpc: serial port discovery (#2)Benjamin Herrenschmidt2006-01-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This moves the discovery of legacy serial ports to a separate file, makes it common to ppc32 and ppc64, and reworks it to use the new OF address translators to get to the ports early. This new version can also detect some PCI serial cards using legacy chips and will probably match those discovered port with the default console choice. Only ppc64 gets udbg still yet, unifying udbg isn't finished yet. It also adds some speed-probing code to udbg so that the default console can come up at the same speed it was set to by the firmware. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [PATCH] spufs: The SPU file system, baseArnd Bergmann2006-01-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the current version of the spu file system, used for driving SPEs on the Cell Broadband Engine. This release is almost identical to the version for the 2.6.14 kernel posted earlier, which is available as part of the Cell BE Linux distribution from http://www.bsc.es/projects/deepcomputing/linuxoncell/. The first patch provides all the interfaces for running spu application, but does not have any support for debugging SPU tasks or for scheduling. Both these functionalities are added in the subsequent patches. See Documentation/filesystems/spufs.txt on how to use spufs. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-29 04:42:07 -0500