aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms
Commit message (Collapse)AuthorAge
* [PATCH] powerpc: Fix typo in powermac platform functionsBenjamin Herrenschmidt2006-09-03
| | | | | | | | | New sparse caught that typo which could have caused erratic hardware behaviour on some machines if the platform functions are used by the firmware to change bits in some FCR registers. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] powerpc: Fix PowerMac IRQ handling bugBenjamin Herrenschmidt2006-09-01
| | | | | | | | | | | | | The port to genirq & the new powerpc interrupt model in 2.6.18 introduced a bug in the legacy PowerMac PIC code (used on older machines) because of a typo potentially causing hangs due to interrupt storms. This fixes it, along with a performance issue causing us to do spurrious retriggers after masking an interrupt. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [POWERPC] Support for "weird" MPICs and fixup mpc7448_hpc2Zang Roy-r619112006-08-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a new hardware information table for mpic. This enables the mpic code to deal with mpic controllers with different register layouts and hardware behaviours. This introduces CONFIG_MPIC_WEIRD. For boards with non standard mpic controllers, select CONFIG_MPIC_WEIRD and add its hardware information in the mpic_infos[] array. TSI108/109 PIC takes the first index of weird hardware information table. :) The table can be extended. The Tsi108/109 PIC looks like standard OpenPIC but, in fact, is different in register mapping and behavior. The patch does not affect the behavior of standard mpic. If CONFIG_MPIC_WEIRD is not defined, the code is essentially identical to the current code. [benh@kernel.crashing.org: This patch is a slightly cleaned up version of Zang Roy's support for the TSI108 MPIC variant. It also fixes up MPC7448_hpc2 to use the new version of the type macros and changes the way MPIC is selected in Kconfig to better match what is done for other system devices. ] Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] modify mpc83xx platforms to use new IRQ layerKim Phillips2006-08-29
| | | | | | | | | | This fixes MPC834x MDS (formerly SYS) and ITX platform code to get IRQ data (including PCI) from the device tree, and to use the new IPIC code. renamed defconfig (sys -> mds), left one redundant NULL assignment in mpc83xx_pcibios_fixup to keep the compiler happy. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Use mpc8641hpcn PIC base address from dev tree.Jon Loeliger2006-08-25
| | | | | | | | | After going through the trouble of setting up the PIC base address in the pic@40000 device tree node, use it instead of the obsolete hard-coded value. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Allow MPC8641 HPCN to build with CONFIG_PCI disabled too.Jon Loeliger2006-08-25
| | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Update mpc7448hpc2 board irq support using device treeZang Roy-r619112006-08-23
| | | | | | | | The patch rewrites mpc7448hpc2 board irq support according to the new mpic device tree interface. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix BootX booting with an initrdBenjamin Herrenschmidt2006-08-23
| | | | | | | | | | | The bootx_init.c trampoline didn't properly add the ramdisk to the "reserve map" (list of reserved areas of memory), thus causing all sorts of failures when using BootX with an initrd. Also fixes a possible problem if the ramdisk is located before the device-tree passed by BootX. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Rewrite the PPC 86xx IRQ handling to use Flat Device TreeJon Loeliger2006-08-23
| | | | | | | | | | | IRQ setup now comes from the Flat Device Tree and use the new generic IRQ code. Fixed the fsl_soc.c IRQ OF interrupt node parsing. Removed some unused MPC86xx macro definition. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org> (cherry picked from 919fede6edab94cccb3ca8c1c0b32fa62c9369a5 commit)
* [POWERPC] Fix CDS IRQ handling and PCI codeAndy Fleming2006-08-23
| | | | | | | | | | | | * Fix IRQ support in the 85xx CDS boards so it uses the new generic stuff * Fix PCI IRQ mapping to use the device tree * Disabled i8259 support to allow the CDS to boot. This will be fixed soon, but the current code doesn't even compile, so this is a vast improvement Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix interrupts on 8540 ADS boardAndy Fleming2006-08-23
| | | | | | | | | * Fixed 8540 ADS support for the new irq layer * Fixed 8540 ADS support for mapping PCI interrupts * Updated 8540 ADS to use device tree for interrupt assignment and sense values Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix might-sleep warning on removing cpusHaren Myneni2006-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Noticing the following might_sleep warning (dump_stack()) during kdump testing when CONFIG_DEBUG_SPINLOCK_SLEEP is enabled. All secondary CPUs will be calling rtas_set_indicator with interrupts disabled to remove them from global interrupt queue. BUG: sleeping function called from invalid context at arch/powerpc/kernel/rtas.c:463 in_atomic():1, irqs_disabled():1 Call Trace: [C00000000FFFB970] [C000000000010234] .show_stack+0x68/0x1b0 (unreliable) [C00000000FFFBA10] [C000000000059354] .__might_sleep+0xd8/0xf4 [C00000000FFFBA90] [C00000000001D1BC] .rtas_busy_delay+0x20/0x5c [C00000000FFFBB20] [C00000000001D8A8] .rtas_set_indicator+0x6c/0xcc [C00000000FFFBBC0] [C000000000048BF4] .xics_teardown_cpu+0x118/0x134 [C00000000FFFBC40] [C00000000004539C] .pseries_kexec_cpu_down_xics+0x74/0x8c [C00000000FFFBCC0] [C00000000002DF08] .crash_ipi_callback+0x15c/0x188 [C00000000FFFBD50] [C0000000000296EC] .smp_message_recv+0x84/0xdc [C00000000FFFBDC0] [C000000000048E08] .xics_ipi_dispatch+0xf0/0x130 [C00000000FFFBE50] [C00000000009EF10] .handle_IRQ_event+0x7c/0xf8 [C00000000FFFBF00] [C0000000000A0A14] .handle_percpu_irq+0x90/0x10c [C00000000FFFBF90] [C00000000002659C] .call_handle_irq+0x1c/0x2c [C00000000058B9C0] [C00000000000CA10] .do_IRQ+0xf4/0x1a4 [C00000000058BA50] [C0000000000044EC] hardware_interrupt_entry+0xc/0x10 --- Exception: 501 at .plpar_hcall_norets+0x14/0x1c LR = .pseries_dedicated_idle_sleep+0x190/0x1d4 [C00000000058BD40] [C00000000058BDE0] 0xc00000000058bde0 (unreliable) [C00000000058BDF0] [C00000000001270C] .cpu_idle+0x10c/0x1e0 [C00000000058BE70] [C000000000009274] .rest_init+0x44/0x5c To fix this issue, rtas_set_indicator_fast() is added so that will not wait for RTAS 'busy' delay and this new function is used for kdump (in xics_teardown_cpu()) and for CPU hotplug ( xics_migrate_irqs_away() and xics_setup_cpu()). Note that the platform architecture spec says that set-indicator on the indicator we're using here is not permitted to return the busy or extended busy status codes. Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] fix PMU initialization on pseries lparSonny Rao2006-08-08
| | | | | | | | | | | We should not be calling power4_enable_pmcs() in pseries_lpar_enable_pmcs(); just doing the hypercall is sufficient. Prior to 2.6.15 we did not call power4_enable_pmcs() for an lpar. power4_enable_pmcs() tries to read the hid0 register which is no longer legal for an lpar in newer Power processors. Signed-off-by: Paul Mackerras <paulus@samba.org>
* Merge branch 'merge' of ↵Linus Torvalds2006-07-31
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Minor comment fix for misc_64.S [POWERPC] Use H_CEDE on non-SMT [POWERPC] force 64bit mode in fwnmi handlers to workaround firmware bugs [POWERPC] PMAC_APM_EMU should depend on ADB_PMU [POWERPC] Fix new interrupt code (MPIC detection) [POWERPC] Fix new interrupt code (MPIC endianness) [POWERPC] Add cpufreq support for Xserve G5 [POWERPC] Xserve G5 thermal control fixes [POWERPC] Fix mem= handling when the memory limit is > RMO size [POWERPC] More offb/bootx fixes [POWERPC] Fix legacy_serial.c error handling on 32 bits [POWERPC] Fix default clock for udbg_16550 [POWERPC] Fix non-MPIC CHRPs with CONFIG_SMP set [POWERPC] Fix 32 bits warning in prom_init.c [POWERPC] Workaround Pegasos incorrect ISA "ranges" [POWERPC] fix up front-LED Kconfig
| * [POWERPC] Use H_CEDE on non-SMTJake Moilanen2006-07-31
| | | | | | | | | | | | | | | | | | | | | | | | On the JS21 systems, they have the SPLPAR hypertas set, but are not SMT capable. So, they are not making the H_CEDE call. This is causing the hypervisor to have to queue up work for the hdecr, taking an excessive amount of time in maintenance code, and causing jitter on the box. Making the H_CEDE call helps alleviate that problem. Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Fix new interrupt code (MPIC detection)Segher Boessenkool2006-07-27
| | | | | | | | | | | | | | | | | | As the code comment already says, the Maple device-tree is incorrect here; make the Linux code detect the correct thing, too. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Fix new interrupt code (MPIC endianness)Segher Boessenkool2006-07-27
| | | | | | | | | | | | | | | | | | All U3/U4 based systems are big-endian, not all express it in their device trees. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Add cpufreq support for Xserve G5Benjamin Herrenschmidt2006-07-27
| | | | | | | | | | | | | | | | | | | | | | The Xserve G5 are capable of frequency switching like other desktop G5s. This enables it. It also fix a Kconfig issue which prevented from building the G5 cpufreq support if CONFIG_PMAC_SMU was not set (the first version of that driver only worked with SMU based macs, but this isn't the case anymore). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] More offb/bootx fixesBenjamin Herrenschmidt2006-07-25
| | | | | | | | | | | | | | | | | | | | | | There were still some issues with offb when BootX doesn't provide a proper display node, this fixes them. This also re-instates the palette hacks that were disabled a couple of kernel versions ago when I converted to the new OF parsing, and shuffles some functions around to avoid prototypes. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Fix non-MPIC CHRPs with CONFIG_SMP setBenjamin Herrenschmidt2006-07-25
| | | | | | | | | | | | | | | | | | | | | | Pseudo-CHRP machines like Pegasos without an MPIC would crash at boot if CONFIG_SMP was set because the "smp_ops" pointer was set to MPIC related ops unconditionally. This patch makes it NULL on machines that don't support SMP and provides proper default behaviour in the callers when smp_ops is NULL. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | [PATCH] powermac: More powermac backlight fixesMichael Hanselmann2006-07-31
|/ | | | | | | | | | | | | | | | | This patch fixes several problems: - The legacy backlight value might be set at interrupt time. Introduced a worker to prevent it from directly calling the backlight code. - via-pmu allows the backlight to be grabbed, in which case we need to prevent other kernel code from changing the brightness. - Don't send PMU requests in via-pmu-backlight when the machine is about to sleep or waking up. - More Kconfig fixes. Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] powermac: Combined fixes for backlight codeMichael Hanselmann2006-07-10
| | | | | | | | | | | | | | | | | | | | | | This patch fixes several problems: - pmac_backlight_key() is called under interrupt context, and therefore can't use mutexes or semaphores, so defer the backlight level for later, as it's not critical (original code by Aristeu S. Rozanski F. <aris@valeta.org>). - Add exports for functions that might be called from modules - Fix Kconfig depdencies on PMAC_BACKLIGHT. - Fix locking issues on calls from inside the driver (reported by Aristeu S. Rozanski F., too) - Fix wrong calculation of backlight values in some of the drivers - Replace pmac_backlight_key_up/down by inline functions [akpm@osdl.org: fix function prototypes] Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Acked-by: Aristeu S. Rozanski F. <aris@valeta.org> Acked-by: Rene Nussbaumer <linux-kernel@killerfox.forkbomb.ch> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] powerpc: fix trigger handling in the new irq codeBenjamin Herrenschmidt2006-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch slightly reworks the new irq code to fix a small design error. I removed the passing of the trigger to the map() calls entirely, it was not a good idea to have one call do two different things. It also fixes a couple of corner cases. Mapping a linux virtual irq to a physical irq now does only that. Setting the trigger is a different action which has a different call. The main changes are: - I no longer call host->ops->map() for an already mapped irq, I just return the virtual number that was already mapped. It was called before to give an opportunity to change the trigger, but that was causing issues as that could happen while the interrupt was in use by a device, and because of the trigger change, map would potentially muck around with things in a racy way. That was causing much burden on a given's controller implementation of map() to get it right. This is much simpler now. map() is only called on the initial mapping of an irq, meaning that you know that this irq is _not_ being used. You can initialize the hardware if you want (though you don't have to). - Controllers that can handle different type of triggers (level/edge/etc...) now implement the standard irq_chip->set_type() call as defined by the generic code. That means that you can use the standard set_irq_type() to configure an irq line manually if you wish or (though I don't like that interface), pass explicit trigger flags to request_irq() as defined by the generic kernel interfaces. Also, using those interfaces guarantees that your controller set_type callback is called with the descriptor lock held, thus providing locking against activity on the same interrupt (including mask/unmask/etc...) automatically. A result is that, for example, MPIC's own map() implementation calls irq_set_type(NONE) to configure the hardware to the default triggers. - To allow the above, the irq_map array entry for the new mapped interrupt is now set before map() callback is called for the controller. - The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function for mapping interrupts from the device-tree now also call the separate set_irq_type(), and only does so if there is a change in the trigger type. - While I was at it, I changed pci_read_irq_line() (which is the helper I would expect most archs to use in their pcibios_fixup() to get the PCI interrupt routing from the device tree) to also handle a fallback when the DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an interrupt number from the device. That number is then mapped using the default controller, and the trigger is set to level low. That default behaviour works for several platforms that don't have a proper interrupt tree like Pegasos. If it doesn't work for your platform, then either provide a proper interrupt tree from the firmware so that fallback isn't needed, or don't call pci_read_irq_line() - Add back a bit that got dropped by my main rework patch for properly clearing pending IPIs on pSeries when using a kexec Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds2006-07-04
|\ | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: kbuild: introduce utsrelease.h kbuild: explicit turn off gcc stack-protector
| * kbuild: introduce utsrelease.hSam Ravnborg2006-07-03
| | | | | | | | | | | | | | | | | | | | | | | | | | include/linux/version.h contained both actual KERNEL version and UTS_RELEASE that contains a subset from git SHA1 for when kernel was compiled as part of a git repository. This had the unfortunate side-effect that all files including version.h would be recompiled when some git changes was made due to changes SHA1. Split it out so we keep independent parts in separate files. Also update checkversion.pl script to no longer check for UTS_RELEASE. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* | Merge branch '83xx' into for_paulusKumar Gala2006-07-03
|\ \
| * | powerpc: Add base support for the Freescale MPC8349E-mITX eval boardKim Phillips2006-07-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added support for the Freescale MPC8343e-mITX board. Currently based on the 8343 SYS code. The 2nd PHY (5-port switch) and SATA are untested (work in progress). Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | [POWERPC] Add new interrupt mapping core and change platforms to use itBenjamin Herrenschmidt2006-07-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the new irq remapper core and removes the old one. Because there are some fundamental conflicts with the old code, like the value of NO_IRQ which I'm now setting to 0 (as per discussions with Linus), etc..., this commit also changes the relevant platform and driver code over to use the new remapper (so as not to cause difficulties later in bisecting). This patch removes the old pre-parsing of the open firmware interrupt tree along with all the bogus assumptions it made to try to renumber interrupts according to the platform. This is all to be handled by the new code now. For the pSeries XICS interrupt controller, a single remapper host is created for the whole machine regardless of how many interrupt presentation and source controllers are found, and it's set to match any device node that isn't a 8259. That works fine on pSeries and avoids having to deal with some of the complexities of split source controllers vs. presentation controllers in the pSeries device trees. The powerpc i8259 PIC driver now always requests the legacy interrupt range. It also has the feature of being able to match any device node (including NULL) if passed no device node as an input. That will help porting over platforms with broken device-trees like Pegasos who don't have a proper interrupt tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | | [POWERPC] Use the genirq frameworkBenjamin Herrenschmidt2006-07-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | This adapts the generic powerpc interrupt handling code, and all of the platforms except for the embedded 6xx machines, to use the new genirq framework. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | | [POWERPC] Fix booting on Momentum "Apache" board (a Maple derivative)Benjamin Herrenschmidt2006-07-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | This extends the maple device-tree workarounds to work on the Apache board as well, and extends the maple platform probing code to recognize the Apache board. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | | [POWERPC] Fix various offb and BootX-related issuesBenjamin Herrenschmidt2006-07-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes various issues with offb (the default fbdev used on powerpc when no proper fbdev is supported). It was broken when using BootX under some circumstances and would fail to properly get the framebuffer base address in others. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | | [POWERPC] fix implicit declaration on cell.Dave Jones2006-07-02
| |/ |/| | | | | | | | | | | | | | | | | (Only fails with -Werror-implicit-function-declaration, but it should still be fixed). arch/powerpc/platforms/cell/setup.c:145: error: implicit declaration of function 'udbg_init_rtas_console' Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | [PATCH] irq-flags: POWERPC: Use the new IRQF_ constantsThomas Gleixner2006-07-02
| | | | | | | | | | | | | | | | | | | | | | Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Remove obsolete #include <linux/config.h>Jörn Engel2006-06-30
| | | | | | | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | typo fixes: occuring -> occurringAdrian Bunk2006-06-30
| | | | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | typo fixes: mecanism -> mechanismAdrian Bunk2006-06-30
| | | | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds2006-06-29
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (43 commits) [POWERPC] Use little-endian bit from firmware ibm,pa-features property [POWERPC] Make sure smp_processor_id works very early in boot [POWERPC] U4 DART improvements [POWERPC] todc: add support for Time-Of-Day-Clock [POWERPC] Make lparcfg.c work when both iseries and pseries are selected [POWERPC] Fix idr locking in init_new_context [POWERPC] mpc7448hpc2 (taiga) board config file [POWERPC] Add tsi108 pci and platform device data register function [POWERPC] Add general support for mpc7448hpc2 (Taiga) platform [POWERPC] Correct the MAX_CONTEXT definition powerpc: minor cleanups for mpc86xx [POWERPC] Make sure we select CONFIG_NEW_LEDS if ADB_PMU_LED is set [POWERPC] Simplify the code defining the 64-bit CPU features [POWERPC] powerpc: kconfig warning fix [POWERPC] Consolidate some of kernel/misc*.S [POWERPC] Remove unused function call_with_mmu_off [POWERPC] update asm-powerpc/time.h [POWERPC] Clean up it_lp_queue.h [POWERPC] Skip the "copy down" of the kernel if it is already at zero. [POWERPC] Add the use of the firmware soft-reset-nmi to kdump. ...
| * | [POWERPC] Make lparcfg.c work when both iseries and pseries are selectedStephen Rothwell2006-06-29
| | | | | | | | | | | | | | | | | | | | | | | | This also consolidates the initial bits of lparcfg_data() and adds the partition number to the iSeries flattened device tree. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Add general support for mpc7448hpc2 (Taiga) platformZang Roy-r619112006-06-29
| | | | | | | | | | | | | | | | | | | | | Add support for Freescale mpc7448 (Taiga) board support Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | Merge branch 'for_paulus' of ↵Paul Mackerras2006-06-28
| |\ \ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc
| | * | powerpc: minor cleanups for mpc86xxKumar Gala2006-06-28
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Remove duplicated cputable entry for 8641 (matches w/7448) * Removed __init from function prototypes in mpc86xx.h * Moved pci fixups into board specific code * Moved mpc86xx_exclude_device to generic mpc86xx pci code * Fixed sparse warnings in mpc86xx_smp.c * Removed board specific header include from asm-powerpc/mpc86xx.h Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | [POWERPC] Clean up it_lp_queue.hStephen Rothwell2006-06-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | No more StudlyCaps. Remove from a couple of places it is no longer needed. Use C style comments. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] spufs: fix class0 interrupt assignmentArnd Bergmann2006-06-28
| | | | | | | | | | | | | | | | | | | | | | | | The class zero interrupt handling for spus was confusing alignment and error interrupts, so swap them. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] spufs: fix memory hotplug dependencyGeoff Levand2006-06-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | spufs_base.c calls __add_pages, which depends on CONFIG_MEMORY_HOTPLUG. Moved the selection of CONFIG_MEMORY_HOTPLUG from CONFIG_SPUFS_MMAP to CONFIG_SPU_FS. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] spufs: fix MFC command queue purgeBenjamin Herrenschmidt2006-06-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the context save/restore code, the SPU MFC command queue purge code has a bug: static inline void wait_purge_complete(struct spu_state *csa, struct spu *spu) { struct spu_priv2 __iomem *priv2 = spu->priv2; /* Save, Step 28: * Poll MFC_CNTL[Ps] until value '11' is * read * (purge complete). */ POLL_WHILE_FALSE(in_be64(&priv2->mfc_control_RW) & MFC_CNTL_PURGE_DMA_COMPLETE); } This will exit as soon as _one_ of the 2 bits that compose MFC_CNTL_PURGE_DMA_COMPLETE is set, and one of them happens to be "purge in progress"... which means that we'll happily continue restoring the MFC while it's being purged at the same time. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] spufs: map mmio space as guarded into user spaceBenjamin Herrenschmidt2006-06-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a bug where we don't properly map SPE MMIO space as guarded, causing various test cases to fail, probably due to write combining and other niceties caused by the lack of the G bit. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Enable the RTAS udbg console on IBM Cell BladeMichael Ellerman2006-06-27
| | | | | | | | | | | | | | | | | | | | | | | | Enable the RTAS udbg console on IBM Cell Blade, this allows xmon to work. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] powerpc: Initialise ppc_md htab pointers earlierMichael Ellerman2006-06-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initialise the ppc_md htab callbacks earlier, in the probe routines. This allows us to call htab_finish_init() from htab_initialize(), and makes it private to hash_utils_64.c. Move htab_finish_init() and make_bl() above htab_initialize() to avoid forward declarations. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Remove remaining iSeries debugger cruftMichael Ellerman2006-06-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | None of this seems to be necessary, so let's see if can remove it and not break anything. Booted on iSeries & pSeries here. NB. we don't remove the hvReleaseData, we just move it down so that the file reads more clearly. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] kdump: Reserve the existing TCE mappings left by the first kernelHaren Myneni2006-06-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During kdump boot, noticed some machines checkstop on dma protection fault for ongoing DMA left in the first kernel. Instead of initializing TCE entries in iommu_init() for the kdump boot, this patch fixes this issue by walking through the each TCE table and checks whether the entries are in use by the first kernel. If so, reserve those entries by setting the corresponding bit in tbl->it_map such that these entries will not be available for the kdump boot. However it could be possible that all TCE entries might be used up due to the driver bug that does continuous mapping. My observation is around 1700 TCE entries are used on some systems (Ex: P4) at some point of time during kdump boot and saving dump (either write into the disk or sending to remote machine). Hence, this patch will make sure that minimum of 2048 entries will be available such that kdump boot could be successful in some cases. Signed-off-by: Haren Myneni <haren@us.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-07 12:09:05 -0500