aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/85xx
Commit message (Collapse)AuthorAge
* powerpc/mpc85xx: Add BSC9132 QDS Supportharninder rai2014-05-22
| | | | | | | | | | | | | | | | | | | | | - BSC9132 is an integrated device that targets Femto base station market. It combines Power Architecture e500v2 and DSP StarCore SC3850 technologies with MAPLE-B2F baseband acceleration processing elements - BSC9132QDS Overview 2Gbyte DDR3 (on board DDR) 32Mbyte 16bit NOR flash 128Mbyte 2K page size NAND Flash 256 Kbit M24256 I2C EEPROM 128 Mbit SPI Flash memory SD slot eTSEC1: Connected to SGMII PHY eTSEC2: Connected to SGMII PHY DUART interface: supports one UARTs up to 115200 bps for console display Signed-off-by: Harninder Rai <harninder.rai@freescale.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/mpc85xx: Remove P1023 RDS supportLijun Pan2014-05-22
| | | | | | | P1023RDS is no longer supported/manufactured by Freescale while P1023RDB is. Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/fsl-booke: Add initial T104x_QDS board supportPrabhakar Kushwaha2014-05-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for T104x board in board file t104x_qds.c, It is common for both T1040 and T1042 as they share same QDS board. T1040QDS board Overview ----------------------- - SERDES Connections, 8 lanes supporting: — PCI Express: supporting Gen 1 and Gen 2; — SGMII — QSGMII — SATA 2.0 — Aurora debug with dedicated connectors (T1040 only) - DDR Controller - Supports rates of up to 1600 MHz data-rate - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types. -IFC/Local Bus - NAND flash: 8-bit, async, up to 2GB. - NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB - GASIC: Simple (minimal) target within Qixis FPGA - PromJET rapid memory download support - Ethernet - Two on-board RGMII 10/100/1G ethernet ports. - PHY #0 remains powered up during deep-sleep (T1040 only) - QIXIS System Logic FPGA - Clocks - System and DDR clock (SYSCLK, “DDRCLK”) - SERDES clocks - Power Supplies - Video - DIU supports video at up to 1280x1024x32bpp - USB - Supports two USB 2.0 ports with integrated PHYs — Two type A ports with 5V@1.5A per port. — Second port can be converted to OTG mini-AB - SDHC - SDHC port connects directly to an adapter card slot, featuring: - Supporting SD slots for: SD, SDHC (1x, 4x, 8x) and/or MMC — Supporting eMMC memory devices - SPI - On-board support of 3 different devices and sizes - Other IO - Two Serial ports - ProfiBus port - Four I2C ports Add T104xQDS support in Kconfig and Makefile. Also create device tree. Following features are currently not implmented. - SerDes: Aurora - IFC: GASIC, Promjet - QIXIS - Ethernet - DIU - power supplies management - ProfiBus Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/85xx: Add OCA4080 board supportMartijn de Gouw2014-05-22
| | | | | | | | | | | | | | OCA4080 overview: - 1.466 GHz Freescale QorIQ P4080E Processor - 4Gbyte DDR3 on board - 8Mbyte Nor flash - Serial RapidIO 1.2 - 1 x 10/100/1000 BASE-T front ethernet - 1 x 1000 BASE-BX ethernet on AMC connector Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive.nl> [scottwood@freescale.com: minor conflict-related changes] Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/mpc85xx: add support for Keymile's kmcoge4 boardValentin Longchamp2014-05-22
| | | | | | | | | | | | | | | | | | | | | | | This patch introduces the support for Keymile's kmcoge4 board which is the internal reference design for boards based on Freescale's P2040/P2041 SoCs. This internal reference design is named kmp204x. The peripherals used on this board are: - SPI NOR Flash as bootloader medium - NAND Flash with a ubi partition - 2 PCIe busses (hosts 1 and 3) - 3 FMAN Ethernet devices (FMAN1 DTSEC1/2/5) - 4 Local Bus windows, with one dedicated to the QRIO reset/power mgmt CPLD - 2 I2C busses - last but not least, the mandatory serial port The patch also adds a defconfig file for this reference design that is necessary because of the lowmem option that must be set higher due to the number of PCIe devices with big ioremapped mem ranges on the boad. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc: Fix SMP issues with ppc64le ABIv2Anton Blanchard2014-04-22
| | | | | | | | | | | There is no need to put a function descriptor in __secondary_hold_spinloop. Use ppc_function_entry to get the instruction address and put it in __secondary_hold_spinloop instead. Also fix an issue where we assumed cur_cpu_spec held a function descriptor. Signed-off-by: Anton Blanchard <anton@samba.org>
* fsl/pci: The new pci suspend/resume implementationWang Dongsheng2014-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | If we do nothing in suspend/resume, some platform PCIe ip-block can't guarantee the link back to L0 state from sleep, then, when we read the EP device will hang. Only we send pme turnoff message in pci controller suspend, and send pme exit message in resume, the link state will be normal. When we send pme turnoff message in pci controller suspend, the links will into l2/l3 ready, then, host cannot communicate with ep device, but pci-driver will call back EP device to save them state. So we need to change platform_driver->suspend/resume to syscore->suspend/resume. So the new suspend/resume implementation, send pme turnoff message in suspend, and send pme exit message in resume. And add a PME handler, to response PME & message interrupt. Change platform_driver->suspend/resume to syscore->suspend/resume. pci-driver will call back EP device, to save EP state in pci_pm_suspend_noirq, so we need to keep the link, until pci_pm_suspend_noirq finish. Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* Corenet: Add QE platform support for CorenetZhao Qiang2014-03-19
| | | | | | | | | There is QE on platform T104x, add support. Call funcs qe_ic_init and qe_init if CONFIG_QUICC_ENGINE is defined. Signed-off-by: Zhao Qiang <B45475@freescale.com> [scottwood@freesacle.com: whitespace fix] Signed-off-by: Scott Wood <scottwood@freescale.com>
* QE: split function mpc85xx_qe_init() into two functions.Zhao Qiang2014-03-19
| | | | | | | | | | | | New QE doesn't have par_io, it doesn't need to init par_io for new QE. Split function mpc85xx_qe_init() into mpc85xx_qe_init() and mpc85xx_qe_par_io_init(). Call mpc85xx_qe_init() for both new and old while mpc85xx_qe_par_io_init() after mpc85xx_qe_init() for old. Signed-off-by: Zhao Qiang <B45475@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc: 85xx rdb: move np pointer to avoid builderrorSebastian Siewior2014-03-19
| | | | | | | | If CONFIG_UCC_GETH or CONFIG_SERIAL_QE is not defined then we get a warning about an used variable which leads to a build error. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Scott Wood <scottwood@freescale.com>
* Merge remote-tracking branch 'scott/next' into nextBenjamin Herrenschmidt2014-01-14
|\ | | | | | | | | | | | | | | | | | | Freescale updates from Scott: << Highlights include 32-bit booke relocatable support, e6500 hardware tablewalk support, various e500 SPE fixes, some new/revived boards, and e6500 deeper idle and altivec powerdown modes. >>
| * powerpc/85xx: Add TWR-P1025 board supportXie Xiaobo2014-01-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TWR-P1025 Overview ----------------- 512Mbyte DDR3 (on board DDR) 64MB Nor Flash eTSEC1: Connected to RGMII PHY AR8035 eTSEC3: Connected to RGMII PHY AR8035 Two USB2.0 Type A One microSD Card slot One mini-PCIe slot One mini-USB TypeB dual UART Signed-off-by: Michael Johnston <michael.johnston@freescale.com> Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> [scottwood@freescale.com: use pr_info rather than KERN_INFO] Signed-off-by: Scott Wood <scottwood@freescale.com>
| * powerpc/85xx: Add QE common init functionXie Xiaobo2014-01-07
| | | | | | | | | | | | | | | | Define a QE init function in common file, and avoid the same codes being duplicated in board files. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * powerpc/85xx: don't init the mpic ipi for the SoC which has doorbell supportKevin Hao2014-01-07
| | | | | | | | | | | | | | | | | | | | | | | | It makes no sense to initialize the mpic ipi for the SoC which has doorbell support. So set the smp_85xx_ops.probe to NULL for this case. Since the smp_85xx_ops.probe is also used in function smp_85xx_setup_cpu() to check if we need to invoke mpic_setup_this_cpu(), we introduce a new setup_cpu function smp_85xx_basic_setup() to remove this dependency. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | powerpc: Delete non-required instances of include <linux/init.h>Paul Gortmaker2014-01-14
|/ | | | | | | | | | | | | | None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. The one instance where we add an include for init.h covers off a case where that file was implicitly getting it from another header which itself didn't need it. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge tag 'devicetree-for-3.13' of ↵Linus Torvalds2013-11-12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DeviceTree updates for 3.13. This is a bit larger pull request than usual for this cycle with lots of clean-up. - Cross arch clean-up and consolidation of early DT scanning code. - Clean-up and removal of arch prom.h headers. Makes arch specific prom.h optional on all but Sparc. - Addition of interrupts-extended property for devices connected to multiple interrupt controllers. - Refactoring of DT interrupt parsing code in preparation for deferred probe of interrupts. - ARM cpu and cpu topology bindings documentation. - Various DT vendor binding documentation updates" * tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits) powerpc: add missing explicit OF includes for ppc dt/irq: add empty of_irq_count for !OF_IRQ dt: disable self-tests for !OF_IRQ of: irq: Fix interrupt-map entry matching MIPS: Netlogic: replace early_init_devtree() call of: Add Panasonic Corporation vendor prefix of: Add Chunghwa Picture Tubes Ltd. vendor prefix of: Add AU Optronics Corporation vendor prefix of/irq: Fix potential buffer overflow of/irq: Fix bug in interrupt parsing refactor. of: set dma_mask to point to coherent_dma_mask of: add vendor prefix for PHYTEC Messtechnik GmbH DT: sort vendor-prefixes.txt of: Add vendor prefix for Cadence of: Add empty for_each_available_child_of_node() macro definition arm/versatile: Fix versatile irq specifications. of/irq: create interrupts-extended property microblaze/pci: Drop PowerPC-ism from irq parsing of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code. of/irq: Use irq_of_parse_and_map() ...
| * powerpc: add missing explicit OF includes for ppcRob Herring2013-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit b5b4bb3f6a11f9 (of: only include prom.h on sparc) removed implicit includes of of_*.h headers by powerpc's prom.h. Some components were missed in initial clean-up patch, so add the necessary includes to fix powerpc builds. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Tejun Heo <tj@kernel.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-ide@vger.kernel.org Cc: linux-crypto@vger.kernel.org
| * powerpc: add explicit OF includesRob Herring2013-10-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When removing prom.h include by of.h, several OF headers will no longer be implicitly included. Add explicit includes of of_*.h as needed. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Anatolij Gustschin <agust@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Olof Johansson <olof@lixom.net> Cc: linuxppc-dev@lists.ozlabs.org
* | powerpc/p1010rdb: add P1010RDB-PB platform supportZhao Qiang2013-10-28
| | | | | | | | | | | | | | | | | | The P1010RDB-PB is similar to P1010RDB(P1010RDB-PA). So, P1010RDB-PB use the same platform file as P1010RDB. Then Add support for P1010RDB-PB platform. Signed-off-by: Zhao Qiang <B45475@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | powerpc/85xx: use one kernel option for all the CoreNet_Generic boardsKevin Hao2013-10-28
| | | | | | | | | | | | | | | | | | | | Currently all these boards use the same machine struct and also select the same kernel options, so it seems a bit of redundant to keep one separate kernel option for each board. Also update the defconfigs according to this change. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | powerpc/85xx: rename the corenet_ds.c to corenet_generic.cKevin Hao2013-10-28
| | | | | | | | | | | | | | | | This file is also used by some RDB and QDS boards. So the name seems not so accurate. Rename it to corenet_generic.c. Also update the function names in this file according to the change. Signed-off-by: Kevin Hao <haokexin@gmail.com>
* | powerpc/85xx: introduce corenet_generic machineKevin Hao2013-10-28
| | | | | | | | | | | | | | | | | | | | | | | | | | In the current kernel, the board files for p2041rdb, p3041ds, p4080ds, p5020ds, p5040ds, t4240qds and b4qds are almost the same except the machine name. So this introduces a cornet_generic machine to support all these boards to avoid the code duplication. With these changes the file corenet_ds.h becomes useless. Just delete it. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | powerpc/b4qds: enable coreintScott Wood2013-10-28
|/ | | | | | | | | | Commit 9837b43c5f3514e5d28f65f1513f4dc6759d2810 ("powerpc/85xx: enable coreint for all the 64bit boards") removed the ifdef that avoided coreint on 64-bit, but it missed b4_qds.c. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Kevin Hao <haokexin@gmail.com> Cc: Shaveta Leekha <shaveta@freescale.com>
* powerpc/85xx: Add C293PCIE board supportMingkai Hu2013-08-23
| | | | | | | | | | | | | | | C293PCIE board is a series of Freescale PCIe add-in cards to perform as public key crypto accelerator or secure key management module. - 512KB platform SRAM in addition to 512K L2 Cache/SRAM - 512MB soldered DDR3 32bit memory - CPLD System Logic - 64MB x16 NOR flash and 4GB x8 NAND flash - 16MB SPI flash Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Po Liu <Po.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/85xx: Add P1023RDB board supportChunhe Lan2013-08-23
| | | | | | | | | | | | | | | | | | | | | | | | | | P1023RDB Specification: ----------------------- Memory subsystem: 512MB DDR3 (Fixed DDR on board) 64MB NOR flash 128MB NAND flash Ethernet: eTSEC1: Connected to Atheros AR8035 GETH PHY eTSEC2: Connected to Atheros AR8035 GETH PHY PCIe: Three mini-PCIe slots USB: Two USB2.0 Type A ports I2C: AT24C08 8K Board EEPROM (8 bit address) Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc: Convert some mftb/mftbu into mfsprScott Wood2013-08-20
| | | | | | | | | | | | | | | | | Some CPUs (such as e500v1/v2) don't implement mftb and will take a trap. mfspr should work on everything that has a timebase, and is the preferred instruction according to ISA v2.06. Currently we get away with mftb on 85xx because the assembler converts it to mfspr due to -Wa,-me500. However, that flag has other effects that are undesireable for certain targets (e.g. lwsync is converted to sync), and is hostile to multiplatform kernels. Thus we would like to stop setting it for all e500-family builds. mftb/mftbu instances which are in 85xx code or common code are converted. Instances which will never run on 85xx are left alone. Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/fsl-booke: Work around erratum A-006958Scott Wood2013-08-20
| | | | | | | | | | | | | | | | Erratum A-006598 says that 64-bit mftb is not atomic -- it's subject to a similar race condition as doing mftbu/mftbl on 32-bit. The lower half of timebase is updated before the upper half; thus, we can share the workaround for a similar bug on Cell. This workaround involves looping if the lower half of timebase is zero, thus avoiding the need for a scratch register (other than CR0). This workaround must be avoided when the timebase is frozen, such as during the timebase sync code. This deals with kernel and vdso accesses, but other userspace accesses will of course need to be fixed elsewhere. Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc: Convert platforms to smp_generic_cpu_bootableAndy Fleming2013-08-14
| | | | | | | | | T4, Cell, powernv, and pseries had the same implementation, so switch them to use a generic version. A2 apparently had a version, but removed it at some point, so we remove the declaration, too. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/mpc85xx: remove the unneeded pci init functions for corenet ds boardKevin Hao2013-08-07
| | | | | | | | | | | | The function pci_devs_phb_init is invoked more earlier than we really probe the pci controller, so it does nothing at all. And we also don't need the pci_dn stuff for the fsl powerpc64 boards, just remove it. It also seems that we don't support ISA on all the current corenet ds boards. So picking a primary bus seems useless, remove that function too. Signed-off-by: Kevin Hao <haokexin@gmail.com>
* powerpc/85xx: add P1020RDB-PD platform supportHaijun.Zhang2013-08-07
| | | | | | | | | | | | | | | | | | | | | | | The p1020rdb-pd has the similar feature as the p1020rdb. Therefore, p1020rdb-pd use the same platform file as the p1/p2 rdb board. Overview of P1020RDB-PD platform: - DDR3 2GB - NOR flash 64MB - NAND flash 128MB - SPI flash 16MB - I2C EEPROM 256Kb - eTSEC1 (RGMII PHY) connected to VSC7385 L2 switch - eTSEC2 (SGMII PHY) - eTSEC3 (RGMII PHY) - SDHC - 2 USB ports - 4 TDM ports - PCIe Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> CC: Scott Wood <scottwood@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* Merge remote-tracking branch 'scott/next' into nextBenjamin Herrenschmidt2013-07-02
|\ | | | | | | Merge Freescale updates
| * powerpc/85xx: enable coreint for all the 64bit boardsKevin Hao2013-07-01
| | | | | | | | | | | | | | | | | | With the patch 7230c564 (powerpc: Rework lazy-interrupt handling), it seems that the coreint works pretty well on the 85xx 64bit kernel. So use the coreint by default for these boards. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | powerpc: Delete __cpuinit usage from all usersPaul Gortmaker2013-06-30
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the powerpc uses of the __cpuinit macros. There are no __CPUINIT users in assembly files in powerpc. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds2013-05-09
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
| * powerpc: remove redundant GENERIC_GPIO selectionAlexandre Courbot2013-03-20
| | | | | | | | | | | | | | | | | | ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO, so there is no need to select it explicitly. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
| * sgy-cts1000: Remove __dev* attributesBen Collins2013-03-18
| | | | | | | | | | | | | | Somehow the driver snuck in with these still in it. Signed-off-by: Ben Collins <ben.c@servergy.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | powerpc/fsl-booke: Add B4_QDS board supportShaveta Leekha2013-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add support for B4 board in board file b4_qds.c, It is common for B4860, B4420 and B4220QDS as they share same QDS board - Add B4QDS support in Kconfig and Makefile B4860QDS is a high-performance computing evaluation, development and test platform supporting the B4860 QorIQ Power Architecture processor, with following major features: - Four dual-threaded e6500 Power Architecture processors organized in one cluster-each core runs up to 1.8 GHz - Two DDR3/3L controllers for high-speed memory interface each runs at up to 1866.67 MHz - CoreNet fabric that fully supports coherency using MESI protocol between the e6500 cores, SC3900 FVP cores, memories and external interfaces. - Data Path Acceleration Architecture having FMAN, QMan, BMan, SEC 5.3 and RMAN - Large internal cache memory with snooping and stashing capabilities - Sixteen 10-GHz SerDes lanes that serve: - Two SRIO interfaces. Each supports up to 4 lanes and a total of up to 8 lanes - Up to 8-lanes Common Public Radio Interface (CPRI) controller for glue-less antenna connection - Two 10-Gbit Ethernet controllers (10GEC) - Six 1G/2.5-Gbit Ethernet controllers for network communications - PCI Express controller - Debug (Aurora) - Various system peripherals B4420 and B4220 have some differences in comparison to B4860 with fewer core/clusters(both SC3900 and e6500), fewer DDR controllers, fewer serdes lanes, fewer SGMII interfaces and reduced target frequencies. Key differences between B4860 and B4420: B4420 has: - Fewer e6500 cores: 1 cluster with 2 e6500 cores - Fewer SC3900 cores/clusters: 1 cluster with 2 SC3900 cores per cluster - Single DDRC @ 1.6GHz - 2 X 4 lane serdes - 3 SGMII interfaces - no sRIO - no 10G Key differences between B4860 and B4220: B4220 has: - Fewer e6500 cores: 1 cluster with 1 e6500 core - Fewer SC3900 cores/clusters: 1 cluster with 2 SC3900 cores per cluster - Single DDRC @ 1.33GHz - 2 X 2 lane serdes - 2 SGMII interfaces - no sRIO - no 10G Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/85xx: fix a bug with the parameter of mpic_reset_core()Chen-Hui Zhao2013-04-03
| | | | | | | | | | | | | | | | mpic_reset_core() need a logical cpu number instead of physical. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/85xx: sgy-cts1000 - Remove __dev* attributesBen Collins2013-04-03
| | | | | | | | | | | | | | Somehow the driver snuck in with these still in it. Signed-off-by: Ben Collins <ben.c@servergy.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/fsl-booke: Add initial T4240QDS board supportKumar Gala2013-03-12
|/ | | | | | | | | | Some minor changes to the common corenet_ds.c code are needed to support the T4240QDS: * Add support for "fsl,qoriq-pcie-v3.0" controller * Bump max # of IRQs to 512 (T4240 supports more interrupts than previous SoCs). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'next' of ↵Linus Torvalds2013-02-23
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "So from the depth of frozen Minnesota, here's the powerpc pull request for 3.9. It has a few interesting highlights, in addition to the usual bunch of bug fixes, minor updates, embedded device tree updates and new boards: - Hand tuned asm implementation of SHA1 (by Paulus & Michael Ellerman) - Support for Doorbell interrupts on Power8 (kind of fast thread-thread IPIs) by Ian Munsie - Long overdue cleanup of the way we handle relocation of our open firmware trampoline (prom_init.c) on 64-bit by Anton Blanchard - Support for saving/restoring & context switching the PPR (Processor Priority Register) on server processors that support it. This allows the kernel to preserve thread priorities established by userspace. By Haren Myneni. - DAWR (new watchpoint facility) support on Power8 by Michael Neuling - Ability to change the DSCR (Data Stream Control Register) which controls cache prefetching on a running process via ptrace by Alexey Kardashevskiy - Support for context switching the TAR register on Power8 (new branch target register meant to be used by some new specific userspace perf event interrupt facility which is yet to be enabled) by Ian Munsie. - Improve preservation of the CFAR register (which captures the origin of a branch) on various exception conditions by Paulus. - Move the Bestcomm DMA driver from arch powerpc to drivers/dma where it belongs by Philippe De Muyter - Support for Transactional Memory on Power8 by Michael Neuling (based on original work by Matt Evans). For those curious about the feature, the patch contains a pretty good description." (See commit db8ff907027b: "powerpc: Documentation for transactional memory on powerpc" for the mentioned description added to the file Documentation/powerpc/transactional_memory.txt) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (140 commits) powerpc/kexec: Disable hard IRQ before kexec powerpc/85xx: l2sram - Add compatible string for BSC9131 platform powerpc/85xx: bsc9131 - Correct typo in SDHC device node powerpc/e500/qemu-e500: enable coreint powerpc/mpic: allow coreint to be determined by MPIC version powerpc/fsl_pci: Store the pci ctlr device ptr in the pci ctlr struct powerpc/85xx: Board support for ppa8548 powerpc/fsl: remove extraneous DIU platform functions arch/powerpc/platforms/85xx/p1022_ds.c: adjust duplicate test powerpc: Documentation for transactional memory on powerpc powerpc: Add transactional memory to pseries and ppc64 defconfigs powerpc: Add config option for transactional memory powerpc: Add transactional memory to POWER8 cpu features powerpc: Add new transactional memory state to the signal context powerpc: Hook in new transactional memory code powerpc: Routines for FP/VSX/VMX unavailable during a transaction powerpc: Add transactional memory unavaliable execption handler powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes powerpc: Add FP/VSX and VMX register load functions for transactional memory powerpc: Add helper functions for transactional memory context switching ...
| * powerpc/e500/qemu-e500: enable coreintScott Wood2013-02-15
| | | | | | | | | | | | | | | | The MPIC code will disable coreint if it detects an insufficient MPIC version. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Board support for ppa8548Stef van Os2013-02-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initial board support for the Prodrive PPA8548 AMC module. Board is an MPC8548 AMC platform used in RapidIO systems. This module is also used to test/work on mainline linux RapidIO software. PPA8548 overview: - 1.3 GHz Freescale PowerQUICC III MPC8548 processor - 1 GB DDR2 @ 266 MHz - 8 MB NOR flash - Serial RapidIO 1.2 - 1 x 10/100/1000 BASE-T front ethernet - 1 x 1000 BASE-BX ethernet on AMC connector Signed-off-by: Stef van Os <stef.van.os@prodrive.nl> Acked-by: Timur Tabi <timur@tabi.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/fsl: remove extraneous DIU platform functionsTimur Tabi2013-02-15
| | | | | | | | | | | | | | | | | | The Freescale DIU driver was recently updated to not require every DIU platform function, so now we can remove the unneeded functions from some boards. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * arch/powerpc/platforms/85xx/p1022_ds.c: adjust duplicate testJulia Lawall2013-02-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Delete successive tests to the same location. The code tested the result of a previous call, that itself was already tested. It is changed to test the result of the most recent call. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ local idexpression y; expression x,e; @@ *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } ... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\) when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\) *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: use for_each_compatible_node() macroWei Yongjun2013-02-13
| | | | | | | | | | | | | | | | Use for_each_compatible_node() macro instead of open coding it. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc: Add support for CTS-1000 GPIO controlled system poweroffBenjamin Collins2013-01-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CTS-1000 is based on P4080. GPIO 27 is used to signal the FPGA to switch off power, and also associates IRQ 8 with front-panel button press (which we use to call orderly_poweroff()). The relevant device-tree looks like this: gpio0: gpio@130000 { compatible = "fsl,qoriq-gpio"; reg = <0x130000 0x1000>; interrupts = <55 2 0 0>; #gpio-cells = <2>; gpio-controller; /* Allows powering off the system via GPIO signal. */ gpio-halt@27 { compatible = "sgy,gpio-halt"; gpios = <&gpio0 27 0>; interrupts = <8 1 0 0>; }; }; Because the driver cannot match on sgy,gpio-halt (because the node is never processed through of_platform), it matches on fsl,qoriq-gpio and then checks child nodes for the matching sgy,gpio-halt. This also ensures that the GPIO controller is detected prior to sgy_cts1000's probe callback, since that node wont match via of_platform until the controller is registered. Also, because the GPIO handler for triggering system poweroff might sleep, the IRQ uses a workqueue to call orderly_poweroff(). As a final note, this driver may be expanded for other features specific to the CTS-1000. Signed-off-by: Ben Collins <ben.c@servergy.com> Cc: Jack Smith <jack.s@servergy.com> Cc: Vihar Rai <vihar.r@servergy.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2013-02-21
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Assorted tiny fixes queued in trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (22 commits) DocBook: update EXPORT_SYMBOL entry to point at export.h Documentation: update top level 00-INDEX file with new additions ARM: at91/ide: remove unsused at91-ide Kconfig entry percpu_counter.h: comment code for better readability x86, efi: fix comment typo in head_32.S IB: cxgb3: delay freeing mem untill entirely done with it net: mvneta: remove unneeded version.h include time: x86: report_lost_ticks doesn't exist any more pcmcia: avoid static analysis complaint about use-after-free fs/jfs: Fix typo in comment : 'how may' -> 'how many' of: add missing documentation for of_platform_populate() btrfs: remove unnecessary cur_trans set before goto loop in join_transaction sound: soc: Fix typo in sound/codecs treewide: Fix typo in various drivers btrfs: fix comment typos Update ibmvscsi module name in Kconfig. powerpc: fix typo (utilties -> utilities) of: fix spelling mistake in comment h8300: Fix home page URL in h8300/README xtensa: Fix home page URL in Kconfig ...
| * | Merge branch 'master' into for-nextJiri Kosina2013-01-29
| |\| | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/devfreq/exynos4_bus.c Sync with Linus' tree to be able to apply patches that are against newer code (mvneta).
| * | powerpc: fix typo (utilties -> utilities)Tim Blechmann2013-01-09
| | | | | | | | | | | | | | | Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-23 23:41:54 -0500