aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kvm
Commit message (Collapse)AuthorAge
...
| * KVM: PPC: E500: Explicitly mark shadow maps invalidAlexander Graf2013-01-24
| | | | | | | | | | | | | | | | | | | | When we invalidate shadow TLB maps on the host, we don't mark them as not valid. But we should. Fix this by removing the E500_TLB_VALID from their flags when invalidating. Signed-off-by: Alexander Graf <agraf@suse.de>
| * KVM: PPC: E500: Move write_stlbe higherAlexander Graf2013-01-24
| | | | | | | | | | | | | | | | | | Later patches want to call the function and it doesn't have dependencies on anything below write_host_tlbe. Move it higher up in the file. Signed-off-by: Alexander Graf <agraf@suse.de>
| * KVM: PPC: BookE: Add EPR ONE_REG syncAlexander Graf2013-01-10
| | | | | | | | | | | | | | | | | | | | We need to be able to read and write the contents of the EPR register from user space. This patch implements that logic through the ONE_REG API and declares its (never implemented) SREGS counterpart as deprecated. Signed-off-by: Alexander Graf <agraf@suse.de>
| * KVM: PPC: BookE: Implement EPR exitAlexander Graf2013-01-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The External Proxy Facility in FSL BookE chips allows the interrupt controller to automatically acknowledge an interrupt as soon as a core gets its pending external interrupt delivered. Today, user space implements the interrupt controller, so we need to check on it during such a cycle. This patch implements logic for user space to enable EPR exiting, disable EPR exiting and EPR exiting itself, so that user space can acknowledge an interrupt when an external interrupt has successfully been delivered into the guest vcpu. Signed-off-by: Alexander Graf <agraf@suse.de>
| * KVM: PPC: BookE: Emulate mfspr on EPRAlexander Graf2013-01-10
| | | | | | | | | | | | | | | | The EPR register is potentially valid for PR KVM as well, so we need to emulate accesses to it. It's only defined for reading, so only handle the mfspr case. Signed-off-by: Alexander Graf <agraf@suse.de>
| * KVM: PPC: BookE: Allow irq deliveries to inject requestsAlexander Graf2013-01-10
| | | | | | | | | | | | | | | | | | | | | | | | | | When injecting an interrupt into guest context, we usually don't need to check for requests anymore. At least not until today. With the introduction of EPR, we will have to create a request when the guest has successfully accepted an external interrupt though. So we need to prepare the interrupt delivery to abort guest entry gracefully. Otherwise we'd delay the EPR request. Signed-off-by: Alexander Graf <agraf@suse.de>
| * KVM: PPC: Fix mfspr/mtspr MMUCFG emulationMihai Caraman2013-01-10
| | | | | | | | | | | | | | | | | | | | On mfspr/mtspr emulation path Book3E's MMUCFG SPR with value 1015 clashes with G4's MSSSR0 SPR. Move MSSSR0 emulation from generic part to Books3S. MSSSR0 also clashes with Book3S's DABRX SPR. DABRX was not explicitly handled so Book3S execution flow will behave as before. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
| * KVM: PPC: Book3S: PR: Enable alternative instruction for SC 1Alexander Graf2013-01-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When running on top of pHyp, the hypercall instruction "sc 1" goes straight into pHyp without trapping in supervisor mode. So if we want to support PAPR guest in this configuration we need to add a second way of accessing PAPR hypercalls, preferably with the exact same semantics except for the instruction. So let's overlay an officially reserved instruction and emulate PAPR hypercalls whenever we hit that one. Signed-off-by: Alexander Graf <agraf@suse.de>
| * KVM: PPC: Only WARN on invalid emulationAlexander Graf2013-01-10
| | | | | | | | | | | | | | | | | | When we hit an emulation result that we didn't expect, that is an error, but it's nothing that warrants a BUG(), because it can be guest triggered. So instead, let's only WARN() the user that this happened. Signed-off-by: Alexander Graf <agraf@suse.de>
| * KVM: struct kvm_memory_slot.user_alloc -> boolAlex Williamson2012-12-13
| | | | | | | | | | | | | | | | | | There's no need for this to be an int, it holds a boolean. Move to the end of the struct for alignment. Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * KVM: Rename KVM_MEMORY_SLOTS -> KVM_USER_MEM_SLOTSAlex Williamson2012-12-13
| | | | | | | | | | | | | | | | | | | | It's easy to confuse KVM_MEMORY_SLOTS and KVM_MEM_SLOTS_NUM. One is the user accessible slots and the other is user + private. Make this more obvious. Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* | Merge branch 'next' of ↵Linus Torvalds2013-02-23
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "So from the depth of frozen Minnesota, here's the powerpc pull request for 3.9. It has a few interesting highlights, in addition to the usual bunch of bug fixes, minor updates, embedded device tree updates and new boards: - Hand tuned asm implementation of SHA1 (by Paulus & Michael Ellerman) - Support for Doorbell interrupts on Power8 (kind of fast thread-thread IPIs) by Ian Munsie - Long overdue cleanup of the way we handle relocation of our open firmware trampoline (prom_init.c) on 64-bit by Anton Blanchard - Support for saving/restoring & context switching the PPR (Processor Priority Register) on server processors that support it. This allows the kernel to preserve thread priorities established by userspace. By Haren Myneni. - DAWR (new watchpoint facility) support on Power8 by Michael Neuling - Ability to change the DSCR (Data Stream Control Register) which controls cache prefetching on a running process via ptrace by Alexey Kardashevskiy - Support for context switching the TAR register on Power8 (new branch target register meant to be used by some new specific userspace perf event interrupt facility which is yet to be enabled) by Ian Munsie. - Improve preservation of the CFAR register (which captures the origin of a branch) on various exception conditions by Paulus. - Move the Bestcomm DMA driver from arch powerpc to drivers/dma where it belongs by Philippe De Muyter - Support for Transactional Memory on Power8 by Michael Neuling (based on original work by Matt Evans). For those curious about the feature, the patch contains a pretty good description." (See commit db8ff907027b: "powerpc: Documentation for transactional memory on powerpc" for the mentioned description added to the file Documentation/powerpc/transactional_memory.txt) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (140 commits) powerpc/kexec: Disable hard IRQ before kexec powerpc/85xx: l2sram - Add compatible string for BSC9131 platform powerpc/85xx: bsc9131 - Correct typo in SDHC device node powerpc/e500/qemu-e500: enable coreint powerpc/mpic: allow coreint to be determined by MPIC version powerpc/fsl_pci: Store the pci ctlr device ptr in the pci ctlr struct powerpc/85xx: Board support for ppa8548 powerpc/fsl: remove extraneous DIU platform functions arch/powerpc/platforms/85xx/p1022_ds.c: adjust duplicate test powerpc: Documentation for transactional memory on powerpc powerpc: Add transactional memory to pseries and ppc64 defconfigs powerpc: Add config option for transactional memory powerpc: Add transactional memory to POWER8 cpu features powerpc: Add new transactional memory state to the signal context powerpc: Hook in new transactional memory code powerpc: Routines for FP/VSX/VMX unavailable during a transaction powerpc: Add transactional memory unavaliable execption handler powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes powerpc: Add FP/VSX and VMX register load functions for transactional memory powerpc: Add helper functions for transactional memory context switching ...
| * | powerpc/kvm/book3s_pr: Fix compilation on 32-bit machinesPaul Mackerras2013-02-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a413f474a0 ("powerpc: Disable relocation on exceptions whenever PR KVM is active") added calls to pSeries_disable_reloc_on_exc() and pSeries_enable_reloc_on_exc() to book3s_pr.c, and added declarations of those functions to <asm/hvcall.h>, but didn't add an include of <asm/hvcall.h> to book3s_pr.c. 64-bit kernels seem to get hvcall.h included via some other path, but 32-bit kernels fail to compile with: arch/powerpc/kvm/book3s_pr.c: In function ‘kvmppc_core_init_vm’: arch/powerpc/kvm/book3s_pr.c:1300:4: error: implicit declaration of function ‘pSeries_disable_reloc_on_exc’ [-Werror=implicit-function-declaration] arch/powerpc/kvm/book3s_pr.c: In function ‘kvmppc_core_destroy_vm’: arch/powerpc/kvm/book3s_pr.c:1316:4: error: implicit declaration of function ‘pSeries_enable_reloc_on_exc’ [-Werror=implicit-function-declaration] cc1: all warnings being treated as errors make[2]: *** [arch/powerpc/kvm/book3s_pr.o] Error 1 make[1]: *** [arch/powerpc/kvm] Error 2 make: *** [sub-make] Error 2 This fixes it by adding an include of hvcall.h. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/kvm/book3s_hv: Preserve guest CFAR register valuePaul Mackerras2013-02-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CFAR (Come-From Address Register) is a useful debugging aid that exists on POWER7 processors. Currently HV KVM doesn't save or restore the CFAR register for guest vcpus, making the CFAR of limited use in guests. This adds the necessary code to capture the CFAR value saved in the early exception entry code (it has to be saved before any branch is executed), save it in the vcpu.arch struct, and restore it on entry to the guest. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | Merge branch 'merge' into nextBenjamin Herrenschmidt2013-01-28
| |\ \ | | | | | | | | | | | | | | | | Merge "merge" branch to bring in various bug fixes that are going into 3.8
| * | | powerpc: Disable relocation on exceptions whenever PR KVM is activeIan Munsie2013-01-10
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For PR KVM we allow userspace to map 0xc000000000000000. Because transitioning from userspace to the guest kernel may use the relocated exception vectors we have to disable relocation on exceptions whenever PR KVM is active as we cannot trust that address. This issue does not apply to HV KVM, since changing from a guest to the hypervisor will never use the relocated exception vectors. Currently the hypervisor interface only allows us to toggle relocation on exceptions on a partition wide scope, so we need to globally disable relocation on exceptions when the first PR KVM instance is started and only re-enable them when all PR KVM instances have been destroyed. It's a bit heavy handed, but until the hypervisor gives us a lightweight way to toggle relocation on exceptions on a single thread it's only real option. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | | Merge 3.8-rc5 into driver-core-nextGreg Kroah-Hartman2013-01-26
|\ \ \ | | |/ | |/| | | | | | | | | | This resolves a gpio driver merge issue pointed out in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | KVM: PPC: Emulate dcbfAlexander Graf2013-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Guests can trigger MMIO exits using dcbf. Since we don't emulate cache incoherent MMIO, just do nothing and move on. Reported-by: Ben Collins <ben.c@servergy.com> Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Ben Collins <ben.c@servergy.com> CC: stable@vger.kernel.org
* | | arch/powerpc/kvm: remove depends on CONFIG_EXPERIMENTALKees Cook2013-01-21
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Alexander Graf <agraf@suse.de> CC: Avi Kivity <avi@redhat.com> CC: Marcelo Tosatti <mtosatti@redhat.com> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* / KVM: PPC: Book3S HV: Fix compilation without CONFIG_PPC_POWERNVAndreas Schwab2013-01-06
|/ | | | | | | | | | Fixes this build breakage: arch/powerpc/kvm/book3s_hv_ras.c: In function ‘kvmppc_realmode_mc_power7’: arch/powerpc/kvm/book3s_hv_ras.c:126:23: error: ‘struct paca_struct’ has no member named ‘opal_mc_evt’ Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: booke: Get/set guest EPCR register using ONE_REG interfaceMihai Caraman2012-12-05
| | | | | | | | | Implement ONE_REG interface for EPCR register adding KVM_REG_PPC_EPCR to the list of ONE_REG PPC supported registers. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> [agraf: remove HV dependency, use get/put_user] Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: bookehv: Add EPCR support in mtspr/mfspr emulationMihai Caraman2012-12-05
| | | | | | | | | | | Add EPCR support in booke mtspr/mfspr emulation. EPCR register is defined only for 64-bit and HV categories, we will expose it at this point only to 64-bit virtual processors running on 64-bit HV hosts. Define a reusable setter function for vcpu's EPCR. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> [agraf: move HV dependency in the code] Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: bookehv: Add guest computation mode for irq deliveryMihai Caraman2012-12-05
| | | | | | | | | When delivering guest IRQs, update MSR computation mode according to guest interrupt computation mode found in EPCR. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> [agraf: remove HV dependency in the code] Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: booke: Extend MAS2 EPN mask for 64-bitMihai Caraman2012-12-05
| | | | | | | | Extend MAS2 EPN mask to retain most significant bits on 64-bit hosts. Use this mask in tlb effective address accessor. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: e500: Mask MAS2 EPN high 32-bits in 32/64 tlbwe emulationMihai Caraman2012-12-05
| | | | | | | | Mask high 32 bits of MAS2's effective page number in tlbwe emulation for guests running in 32-bit mode. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: e500: Add emulation helper for getting instruction eaMihai Caraman2012-12-05
| | | | | | | | | Add emulation helper for getting instruction ea and refactor tlb instruction emulation to use it. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> [agraf: keep rt variable around] Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: bookehv64: Add support for interrupt handlingMihai Caraman2012-12-05
| | | | | | | | | | Add interrupt handling support for 64-bit bookehv hosts. Unify 32 and 64 bit implementations using a common stack layout and a common execution flow starting from kvm_handler_common macro. Update documentation for 64-bit input register values. This patch only address the bolted TLB miss exception handlers version. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: bookehv: Remove GET_VCPU macro from exception handlerMihai Caraman2012-12-05
| | | | | | | | GET_VCPU define will not be implemented for 64-bit for performance reasons so get rid of it also on 32-bit. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: booke: Fix get_tb() compile error on 64-bitMihai Caraman2012-12-05
| | | | | | | Include header file for get_tb() declaration. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: e500: Silence bogus GCC warning in tlb codeMihai Caraman2012-12-05
| | | | | | | | | 64-bit GCC 4.5.1 warns about an uninitialized variable which was guarded by a flag. Initialize the variable to make it happy. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> [agraf: reword comment] Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: Book3S HV: Handle guest-caused machine checks on POWER7 without ↵Paul Mackerras2012-12-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | panicking Currently, if a machine check interrupt happens while we are in the guest, we exit the guest and call the host's machine check handler, which tends to cause the host to panic. Some machine checks can be triggered by the guest; for example, if the guest creates two entries in the SLB that map the same effective address, and then accesses that effective address, the CPU will take a machine check interrupt. To handle this better, when a machine check happens inside the guest, we call a new function, kvmppc_realmode_machine_check(), while still in real mode before exiting the guest. On POWER7, it handles the cases that the guest can trigger, either by flushing and reloading the SLB, or by flushing the TLB, and then it delivers the machine check interrupt directly to the guest without going back to the host. On POWER7, the OPAL firmware patches the machine check interrupt vector so that it gets control first, and it leaves behind its analysis of the situation in a structure pointed to by the opal_mc_evt field of the paca. The kvmppc_realmode_machine_check() function looks at this, and if OPAL reports that there was no error, or that it has handled the error, we also go straight back to the guest with a machine check. We have to deliver a machine check to the guest since the machine check interrupt might have trashed valid values in SRR0/1. If the machine check is one we can't handle in real mode, and one that OPAL hasn't already handled, or on PPC970, we exit the guest and call the host's machine check handler. We do this by jumping to the machine_check_fwnmi label, rather than absolute address 0x200, because we don't want to re-execute OPAL's handler on POWER7. On PPC970, the two are equivalent because address 0x200 just contains a branch. Then, if the host machine check handler decides that the system can continue executing, kvmppc_handle_exit() delivers a machine check interrupt to the guest -- once again to let the guest know that SRR0/1 have been modified. Signed-off-by: Paul Mackerras <paulus@samba.org> [agraf: fix checkpatch warnings] Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: Book3S HV: Improve handling of local vs. global TLB invalidationsPaul Mackerras2012-12-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we change or remove a HPT (hashed page table) entry, we can do either a global TLB invalidation (tlbie) that works across the whole machine, or a local invalidation (tlbiel) that only affects this core. Currently we do local invalidations if the VM has only one vcpu or if the guest requests it with the H_LOCAL flag, though the guest Linux kernel currently doesn't ever use H_LOCAL. Then, to cope with the possibility that vcpus moving around to different physical cores might expose stale TLB entries, there is some code in kvmppc_hv_entry to flush the whole TLB of entries for this VM if either this vcpu is now running on a different physical core from where it last ran, or if this physical core last ran a different vcpu. There are a number of problems on POWER7 with this as it stands: - The TLB invalidation is done per thread, whereas it only needs to be done per core, since the TLB is shared between the threads. - With the possibility of the host paging out guest pages, the use of H_LOCAL by an SMP guest is dangerous since the guest could possibly retain and use a stale TLB entry pointing to a page that had been removed from the guest. - The TLB invalidations that we do when a vcpu moves from one physical core to another are unnecessary in the case of an SMP guest that isn't using H_LOCAL. - The optimization of using local invalidations rather than global should apply to guests with one virtual core, not just one vcpu. (None of this applies on PPC970, since there we always have to invalidate the whole TLB when entering and leaving the guest, and we can't support paging out guest memory.) To fix these problems and simplify the code, we now maintain a simple cpumask of which cpus need to flush the TLB on entry to the guest. (This is indexed by cpu, though we only ever use the bits for thread 0 of each core.) Whenever we do a local TLB invalidation, we set the bits for every cpu except the bit for thread 0 of the core that we're currently running on. Whenever we enter a guest, we test and clear the bit for our core, and flush the TLB if it was set. On initial startup of the VM, and when resetting the HPT, we set all the bits in the need_tlb_flush cpumask, since any core could potentially have stale TLB entries from the previous VM to use the same LPID, or the previous contents of the HPT. Then, we maintain a count of the number of online virtual cores, and use that when deciding whether to use a local invalidation rather than the number of online vcpus. The code to make that decision is extracted out into a new function, global_invalidates(). For multi-core guests on POWER7 (i.e. when we are using mmu notifiers), we now never do local invalidations regardless of the H_LOCAL flag. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: Book3S PR: MSR_DE doesn't exist on Book 3SPaul Mackerras2012-12-05
| | | | | | | | | | | The mask of MSR bits that get transferred from the guest MSR to the shadow MSR included MSR_DE. In fact that bit only exists on Book 3E processors, and it is assigned the same bit used for MSR_BE on Book 3S processors. Since we already had MSR_BE in the mask, this just removes MSR_DE. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: Book3S PR: Fix VSX handlingPaul Mackerras2012-12-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes various issues in how we were handling the VSX registers that exist on POWER7 machines. First, we were running off the end of the current->thread.fpr[] array. Ultimately this was because the vcpu->arch.vsr[] array is sized to be able to store both the FP registers and the extra VSX registers (i.e. 64 entries), but PR KVM only uses it for the extra VSX registers (i.e. 32 entries). Secondly, calling load_up_vsx() from C code is a really bad idea, because it jumps to fast_exception_return at the end, rather than returning with a blr instruction. This was causing it to jump off to a random location with random register contents, since it was using the largely uninitialized stack frame created by kvmppc_load_up_vsx. In fact, it isn't necessary to call either __giveup_vsx or load_up_vsx, since giveup_fpu and load_up_fpu handle the extra VSX registers as well as the standard FP registers on machines with VSX. Also, since VSX instructions can access the VMX registers and the FP registers as well as the extra VSX registers, we have to load up the FP and VMX registers before we can turn on the MSR_VSX bit for the guest. Conversely, if we save away any of the VSX or FP registers, we have to turn off MSR_VSX for the guest. To handle all this, it is more convenient for a single call to kvmppc_giveup_ext() to handle all the state saving that needs to be done, so we make it take a set of MSR bits rather than just one, and the switch statement becomes a series of if statements. Similarly kvmppc_handle_ext needs to be able to load up more than one set of registers. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: Book3S PR: Emulate PURR, SPURR and DSCR registersPaul Mackerras2012-12-05
| | | | | | | | | | | | | | This adds basic emulation of the PURR and SPURR registers. We assume we are emulating a single-threaded core, so these advance at the same rate as the timebase. A Linux kernel running on a POWER7 expects to be able to access these registers and is not prepared to handle a program interrupt on accessing them. This also adds a very minimal emulation of the DSCR (data stream control register). Writes are ignored and reads return zero. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: Book3S HV: Don't give the guest RW access to RO pagesPaul Mackerras2012-12-05
| | | | | | | | | | | | | | | | | Currently, if the guest does an H_PROTECT hcall requesting that the permissions on a HPT entry be changed to allow writing, we make the requested change even if the page is marked read-only in the host Linux page tables. This is a problem since it would for instance allow a guest to modify a page that KSM has decided can be shared between multiple guests. To fix this, if the new permissions for the page allow writing, we need to look up the memslot for the page, work out the host virtual address, and look up the Linux page tables to get the PTE for the page. If that PTE is read-only, we reduce the HPTE permissions to read-only. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: Book3S HV: Report correct HPT entry index when reading HPTPaul Mackerras2012-12-05
| | | | | | | | | | | | This fixes a bug in the code which allows userspace to read out the contents of the guest's hashed page table (HPT). On the second and subsequent passes through the HPT, when we are reporting only those entries that have changed, we were incorrectly initializing the index field of the header with the index of the first entry we skipped rather than the first changed entry. This fixes it. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: Book3S HV: Reset reverse-map chains when resetting the HPTPaul Mackerras2012-12-05
| | | | | | | | | | | | | | | | | | | | | With HV-style KVM, we maintain reverse-mapping lists that enable us to find all the HPT (hashed page table) entries that reference each guest physical page, with the heads of the lists in the memslot->arch.rmap arrays. When we reset the HPT (i.e. when we reboot the VM), we clear out all the HPT entries but we were not clearing out the reverse mapping lists. The result is that as we create new HPT entries, the lists get corrupted, which can easily lead to loops, resulting in the host kernel hanging when it tries to traverse those lists. This fixes the problem by zeroing out all the reverse mapping lists when we zero out the HPT. This incidentally means that we are also zeroing our record of the referenced and changed bits (not the bits in the Linux PTEs, used by the Linux MM subsystem, but the bits used by the KVM_GET_DIRTY_LOG ioctl, and those used by kvm_age_hva() and kvm_test_age_hva()). Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: Book3S HV: Provide a method for userspace to read and write the HPTPaul Mackerras2012-12-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A new ioctl, KVM_PPC_GET_HTAB_FD, returns a file descriptor. Reads on this fd return the contents of the HPT (hashed page table), writes create and/or remove entries in the HPT. There is a new capability, KVM_CAP_PPC_HTAB_FD, to indicate the presence of the ioctl. The ioctl takes an argument structure with the index of the first HPT entry to read out and a set of flags. The flags indicate whether the user is intending to read or write the HPT, and whether to return all entries or only the "bolted" entries (those with the bolted bit, 0x10, set in the first doubleword). This is intended for use in implementing qemu's savevm/loadvm and for live migration. Therefore, on reads, the first pass returns information about all HPTEs (or all bolted HPTEs). When the first pass reaches the end of the HPT, it returns from the read. Subsequent reads only return information about HPTEs that have changed since they were last read. A read that finds no changed HPTEs in the HPT following where the last read finished will return 0 bytes. The format of the data provides a simple run-length compression of the invalid entries. Each block of data starts with a header that indicates the index (position in the HPT, which is just an array), the number of valid entries starting at that index (may be zero), and the number of invalid entries following those valid entries. The valid entries, 16 bytes each, follow the header. The invalid entries are not explicitly represented. Signed-off-by: Paul Mackerras <paulus@samba.org> [agraf: fix documentation] Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: Book3S HV: Make a HPTE removal function availablePaul Mackerras2012-12-05
| | | | | | | | | This makes a HPTE removal function, kvmppc_do_h_remove(), available outside book3s_hv_rm_mmu.c. This will be used by the HPT writing code. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: Book3S HV: Add a mechanism for recording modified HPTEsPaul Mackerras2012-12-05
| | | | | | | | | | | | | | | | This uses a bit in our record of the guest view of the HPTE to record when the HPTE gets modified. We use a reserved bit for this, and ensure that this bit is always cleared in HPTE values returned to the guest. The recording of modified HPTEs is only done if other code indicates its interest by setting kvm->arch.hpte_mod_interest to a non-zero value. The reason for this is that when later commits add facilities for userspace to read the HPT, the first pass of reading the HPT will be quicker if there are no (or very few) HPTEs marked as modified, rather than having most HPTEs marked as modified. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: Book3S HV: Fix bug causing loss of page dirty statePaul Mackerras2012-12-05
| | | | | | | | | | | | | | | | This fixes a bug where adding a new guest HPT entry via the H_ENTER hcall would lose the "changed" bit in the reverse map information for the guest physical page being mapped. The result was that the KVM_GET_DIRTY_LOG could return a zero bit for the page even though the page had been modified by the guest. This fixes it by only modifying the index and present bits in the reverse map entry, thus preserving the reference and change bits. We were also unnecessarily setting the reference bit, and this fixes that too. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: Book3S HV: Restructure HPT entry creation codePaul Mackerras2012-12-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This restructures the code that creates HPT (hashed page table) entries so that it can be called in situations where we don't have a struct vcpu pointer, only a struct kvm pointer. It also fixes a bug where kvmppc_map_vrma() would corrupt the guest R4 value. Most of the work of kvmppc_virtmode_h_enter is now done by a new function, kvmppc_virtmode_do_h_enter, which itself calls another new function, kvmppc_do_h_enter, which contains most of the old kvmppc_h_enter. The new kvmppc_do_h_enter takes explicit arguments for the place to return the HPTE index, the Linux page tables to use, and whether it is being called in real mode, thus removing the need for it to have the vcpu as an argument. Currently kvmppc_map_vrma creates the VRMA (virtual real mode area) HPTEs by calling kvmppc_virtmode_h_enter, which is designed primarily to handle H_ENTER hcalls from the guest that need to pin a page of memory. Since H_ENTER returns the index of the created HPTE in R4, kvmppc_virtmode_h_enter updates the guest R4, corrupting the guest R4 in the case when it gets called from kvmppc_map_vrma on the first VCPU_RUN ioctl. With this, kvmppc_map_vrma instead calls kvmppc_virtmode_do_h_enter with the address of a dummy word as the place to store the HPTE index, thus avoiding corrupting the guest R4. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: PPC: Support eventfdAlexander Graf2012-12-05
| | | | | | | In order to support the generic eventfd infrastructure on PPC, we need to call into the generic KVM in-kernel device mmio code. Signed-off-by: Alexander Graf <agraf@suse.de>
* KVM: x86: add kvm_arch_vcpu_postcreate callback, move TSC initializationMarcelo Tosatti2012-11-27
| | | | | | TSC initialization will soon make use of online_vcpus. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* Merge commit 'origin/queue' into for-queueAlexander Graf2012-10-31
|\ | | | | | | | | | | Conflicts: arch/powerpc/include/asm/Kbuild arch/powerpc/include/uapi/asm/Kbuild
| * KVM: do not treat noslot pfn as a error pfnXiao Guangrong2012-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch filters noslot pfn out from error pfns based on Marcelo comment: noslot pfn is not a error pfn After this patch, - is_noslot_pfn indicates that the gfn is not in slot - is_error_pfn indicates that the gfn is in slot but the error is occurred when translate the gfn to pfn - is_error_noslot_pfn indicates that the pfn either it is error pfns or it is noslot pfn And is_invalid_pfn can be removed, it makes the code more clean Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * Merge remote-tracking branch 'master' into queueMarcelo Tosatti2012-10-29
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge reason: development work has dependency on kvm patches merged upstream. Conflicts: arch/powerpc/include/asm/Kbuild arch/powerpc/include/asm/kvm_para.h Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| | * powerpc: Build fix for powerpc KVMAneesh Kumar K.V2012-10-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix build failure for powerpc KVM by adding missing VPN_SHIFT definition and the ';' arch/powerpc/kvm/book3s_32_mmu_host.c: In function 'kvmppc_mmu_map_page': arch/powerpc/kvm/book3s_32_mmu_host.c:176: error: 'VPN_SHIFT' undeclared (first use in this function) arch/powerpc/kvm/book3s_32_mmu_host.c:176: error: (Each undeclared identifier is reported only once arch/powerpc/kvm/book3s_32_mmu_host.c:176: error: for each function it appears in.) arch/powerpc/kvm/book3s_32_mmu_host.c:178: error: expected ';' before 'next_pteg' arch/powerpc/kvm/book3s_32_mmu_host.c:190: error: label 'next_pteg' used but not defined make[1]: *** [arch/powerpc/kvm/book3s_32_mmu_host.o] Error 1 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| | * mm: kill vma flag VM_RESERVED and mm->reserved_vm counterKonstantin Khlebnikov2012-10-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA, currently it lost original meaning but still has some effects: | effect | alternative flags -+------------------------+--------------------------------------------- 1| account as reserved_vm | VM_IO 2| skip in core dump | VM_IO, VM_DONTDUMP 3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP 4| do not mlock | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP This patch removes reserved_vm counter from mm_struct. Seems like nobody cares about it, it does not exported into userspace directly, it only reduces total_vm showed in proc. Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP. remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP. remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP. [akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-08 18:11:08 -0400