aboutsummaryrefslogtreecommitdiffstats
path: root/arch/mips
Commit message (Collapse)AuthorAge
* MIPS: Handle OCTEON BBIT instructions in FPU emulator.David Daney2013-08-20
| | | | | | | | | | The branch emulation needs to handle the OCTEON BBIT instructions, otherwise we get SIGILL instead of emulation. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5726/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BMIPS: fix hardware interrupt routing for boot CPU != 0Florian Fainelli2013-08-05
| | | | | | | | | | | | | | | | The hardware interrupt routing for boot CPU != 0 is wrong because it will route all the hardware interrupts to TP0 which is not the one we booted from. Fix this by properly checking which boot CPU we are booting from and updating the right interrupt mask for the boot CPU. This fixes booting on BCM3368 with bmips_smp_emabled = 0. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: jogo@openwrt.org Cc: cernekee@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/5650/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: oprofile: Fix BUG due to smp_processor_id() in preemptible code.Ralf Baechle2013-08-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | current_cpu_type() is not preemption-safe. If CONFIG_PREEMPT is enabled then mipsxx_reg_setup() can be called from preemptible state. Added get_cpu()/put_cpu() pair to make it preemption-safe. This was found while testing oprofile with CONFIG_DEBUG_PREEMPT enable. /usr/zntestsuite # opcontrol --init /usr/zntestsuite # opcontrol --setup --event=L2_CACHE_ACCESSES:500 --event=L2_CACHE_MISSES:500 --no-vmlinux /usr/zntestsuite # opcontrol --start Using 2.6+ OProfile kernel interface. BUG: using smp_processor_id() in preemptible [00000000] code: oprofiled/1362 caller is mipsxx_reg_setup+0x11c/0x164 CPU: 0 PID: 1362 Comm: oprofiled Not tainted 3.10.4 #18 Stack : 00000006 70757465 00000000 00000000 00000000 00000000 80b173f6 00000037 80b10000 00000000 80b21614 88f5a220 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 89c49c00 89c49c2c 80721254 807b7927 8012c1d0 80b10000 80721254 00000000 00000552 88f5a220 80b1335c 807b78e6 89c49ba8 ... Call Trace: [<801099a4>] show_stack+0x64/0x7c [<80665520>] dump_stack+0x20/0x2c [<803a2250>] debug_smp_processor_id+0xe0/0xf0 [<8052df24>] mipsxx_reg_setup+0x11c/0x164 [<8052cd70>] op_mips_setup+0x24/0x4c [<80529cfc>] oprofile_setup+0x5c/0x12c [<8052b9f8>] event_buffer_open+0x78/0xf8 [<801c3150>] do_dentry_open.isra.15+0x2b8/0x3b0 [<801c3270>] finish_open+0x28/0x4c [<801d49b8>] do_last.isra.41+0x2cc/0xd00 [<801d54a0>] path_openat+0xb4/0x4c4 [<801d5c44>] do_filp_open+0x3c/0xac [<801c4744>] do_sys_open+0x110/0x1f4 [<8010f47c>] stack_done+0x20/0x44 Bug reported and original patch by Jerin Jacob <jerinjacobk@gmail.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Jerin Jacob <jerinjacobk@gmail.com>
* MIPS: PNX833x: PNX8335_PCI_ETHERNET_INT depends on CONFIG_SOC_PNX8335Markos Chandras2013-08-05
| | | | | | | | | | | | | | | | | The PNX8335_PCI_ETHERNET_INT macro is defined in arch/mips/include/asm/mach-pnx833x/irq-mapping.h only if CONFIG_SOC_PNX8335 is selected. Fixes the following randconfig problem: arch/mips/pnx833x/common/platform.c:210:12: error: 'PNX8335_PIC_ETHERNET_INT' undeclared here (not in a function) Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5585/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BMIPS: fix slave CPU booting when physical CPU is not 0Florian Fainelli2013-07-30
| | | | | | | | | | | | | | | | The current BMIPS SMP code assumes that the slave CPU is physical and logical CPU 1, but on some systems such as BCM3368, the slave CPU is physical CPU0. Fix the code to read the physical CPU (thread ID) we are running this code on, and adjust the relocation vector address based on it. This allows bringing up the second CPU on BCM3368 for instance. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Cc: blogic@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/5621/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BMIPS: do not change interrupt routing depending on boot CPUFlorian Fainelli2013-07-30
| | | | | | | | | | | | | | | Commit 4df715aa ("MIPS: BMIPS: support booting from physical CPU other than 0") changed the interupt routing when we are booting from physical CPU 0, but the settings are actually correct if we are booting from physical CPU 0 or CPU 1. Revert that specific change. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Cc: blogic@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/5622/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: powertv: Fix arguments for free_reserved_area()Markos Chandras2013-07-30
| | | | | | | | | | | | | | | | | | | | Commit 6e7582bf35b8a5a330fd08b398ae445bac86917a "MIPS: PowerTV: use free_reserved_area() to simplify code" merged in 3.11-rc1, broke the build for the powertv defconfig with the following build error: arch/mips/powertv/asic/asic_devices.c: In function 'platform_release_memory': arch/mips/powertv/asic/asic_devices.c:533:7: error: passing argument 1 of 'free_reserved_area' makes pointer from integer without a cast [-Werror] The free_reserved_area() function expects a void * pointer for the start address and a void * pointer for the end one. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5624/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Set default CPU type for BCM47XX platformsMarkos Chandras2013-07-30
| | | | | | | | | | | | | If neither BCM47XX_SSD nor BCM47XX_BCMA is selected, then no CPU type is available leading to build problems. We fix this problem by using MIPS32r1 as the default CPU type for the BCM47XX platform. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5618/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: uapi/asm/siginfo.h: Fix GCC 4.1.2 compilationMaciej W. Rozycki2013-07-30
| | | | | | | | | | | | | | It wasn't until GCC 4.3 I believe that the __SIZEOF_*__ predefined macros were added. The change below switches <uapi/asm/siginfo.h> to the _MIPS_SZLONG macro so that compilation with e.g. GCC 4.1.2 succeeds. This is a user API header so I think this is even more important, for older userland support. The change adds an unsuccessful default too, to catch any compiler configuration oddities. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5630/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Fix multiple definitions of UNCAC_BASE.Steven J. Hill2013-07-30
| | | | | | | | | | | | | | | | | | | | | | | | Fix build error below: arch/mips/include/asm/mach-generic/spaces.h:29:0: warning: "UNCAC_BASE" redefined [enabled by default] In file included from arch/mips/include/asm/addrspace.h:13:0, from arch/mips/include/asm/barrier.h:11, from arch/mips/include/asm/bitops.h:18, from include/linux/bitops.h:22, from include/linux/kernel.h:10, from include/asm-generic/bug.h:13, from arch/mips/include/asm/bug.h:41, from include/linux/bug.h:4, from include/linux/page-flags.h:9, from kernel/bounds.c:9: arch/mips/include/asm/mach-ar7/spaces.h:20:0: note: this is the location of the previous definition Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5583/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2013-07-19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS fixes from Ralf Baechle: "MIPS fixes for 3.11. Half of then is for Netlogic the remainder touches things across arch/mips. Nothing really dramatic and by rc1 standards MIPS will be in fairly good shape with this applied. Tested by building all MIPS defconfigs of which with this pull request four platforms won't build. And yes, it boots also on my favorite test systems" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: kvm: Kconfig: Drop HAVE_KVM dependency from VIRTUALIZATION MIPS: Octeon: Fix DT pruning bug with pip ports MIPS: KVM: Mark KVM_GUEST (T&E KVM) as BROKEN_ON_SMP MIPS: tlbex: fix broken build in v3.11-rc1 MIPS: Netlogic: Add XLP PIC irqdomain MIPS: Netlogic: Fix USB block's coherent DMA mask MIPS: tlbex: Fix typo in r3000 tlb store handler MIPS: BMIPS: Fix thinko to release slave TP from reset MIPS: Delete dead invocation of exception_exit().
| * MIPS: kvm: Kconfig: Drop HAVE_KVM dependency from VIRTUALIZATIONMarkos Chandras2013-07-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Virtualization does not always need KVM capabilities so drop the dependency. The KVM symbol already depends on HAVE_KVM. Fixes the following problem on a randconfig: warning: (REMOTEPROC && RPMSG) selects VIRTUALIZATION which has unmet direct dependencies (HAVE_KVM) warning: (REMOTEPROC && RPMSG) selects VIRTUALIZATION which has unmet direct dependencies (HAVE_KVM) Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5443/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Octeon: Fix DT pruning bug with pip portsFaidon Liambotis2013-07-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During the pruning of the device tree octeon_fdt_pip_iface() is called for each PIP interface and every port up to the port count is removed from the device tree. However, the count was set to the return value of cvmx_helper_interface_enumerate() which doesn't actually return the count but just returns zero on success. This effectively removed *all* ports from the tree. Use cvmx_helper_ports_on_interface() instead to fix this. This successfully restores the 3 ports of my ERLite-3 and fixes the "kernel assigns random MAC addresses" issue. Signed-off-by: Faidon Liambotis <paravoid@debian.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5587/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: KVM: Mark KVM_GUEST (T&E KVM) as BROKEN_ON_SMPJames Hogan2013-07-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make KVM_GUEST depend on BROKEN_ON_SMP so that it cannot be enabled with SMP. SMP kernels use ll/sc instructions for an atomic section in the tlb fill handler, with a tlbp instruction contained in the middle. This cannot be emulated with trap & emulate KVM because the tlbp instruction traps and the eret to return to the guest code clears the LLbit which makes the sc instruction always fail. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Sanjay Lal <sanjayl@kymasys.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5588/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: tlbex: fix broken build in v3.11-rc1Aaro Koskinen2013-07-19
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6ba045f9fbdafb48da42aa8576ea7a3980443136 (MIPS: Move generated code to .text for microMIPS) deleted tlbmiss_handler_setup_pgd_array, but some references were not converted. Fix that to enable building a MIPS kernel. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Jayachandran C. <jchandra@broadcom.com> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Netlogic: Add XLP PIC irqdomainJayachandran C2013-07-19
| | | | | | | | | | | | | | | | | | | | | | | | Add a legacy irq domain for the XLP PIC interrupts. This will be used when interrupts are assigned from the device tree. This change is required after commit c5cdc67 "irqdomain: Remove temporary MIPS workaround code". Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Cc: Jayachandran C <jchandra@broadcom.com> Patchwork: https://patchwork.linux-mips.org/patch/5597/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Netlogic: Fix USB block's coherent DMA maskGanesan Ramalingam2013-07-19
| | | | | | | | | | | | | | | | | | | | | | | | The on-chip USB controller on Netlogic XLP does not suppport DMA beyond 32-bit physical address. Set the coherent_dma_mask of the USB in its PCI fixup to support this. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C. <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5596/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: tlbex: Fix typo in r3000 tlb store handlerTony Wu2013-07-19
| | | | | | | | | | | | | | | | | | | | | | | | commit 6ba045f (MIPS: Move generated code to .text for microMIPS) causes a panic at boot. The handler builder should test against handle_tlbs_end, not handle_tlbs. Signed-off-by: Tony Wu <tung7970@gmail.com> Acked-by: Jayachandran C. <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5600/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: BMIPS: Fix thinko to release slave TP from resetFlorian Fainelli2013-07-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4df715aa ["MIPS: BMIPS: support booting from physical CPU other than 0"] introduced a thinko which will prevents slave CPUs from being released from reset on systems where we boot from TP0. The problem is that we are checking whether the slave CPU logical CPU map is 0, which is never true for systems booting from TP0, so we do not release the slave TP from reset and we are just stuck. Fix this by properly checking that the CPU we intend to boot really is the physical slave CPU (logical and physical value being 1). Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: Florian Fainelli <florian@openwrt.org> Patchwork: https://patchwork.linux-mips.org/patch/5598/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Delete dead invocation of exception_exit().Ralf Baechle2013-07-17
| | | | | | | | | | | | | | panic() doesn't return so this call was useless. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Alexander Sverdlin <alexander.sverdlin@nsn.com>
* | MIPS: Delete __cpuinit/__CPUINIT usage from MIPS codePaul Gortmaker2013-07-14
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2013-07-13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: "Just a bunch of small fixes and tidy ups: 1) Finish the "busy_poll" renames, from Eliezer Tamir. 2) Fix RCU stalls in IFB driver, from Ding Tianhong. 3) Linearize buffers properly in tun/macvtap zerocopy code. 4) Don't crash on rmmod in vxlan, from Pravin B Shelar. 5) Spinlock used before init in alx driver, from Maarten Lankhorst. 6) A sparse warning fix in bnx2x broke TSO checksums, fix from Dmitry Kravkov. 7) Dummy and ifb driver load failure paths can oops, fixes from Tan Xiaojun and Ding Tianhong. 8) Correct MTU calculations in IP tunnels, from Alexander Duyck. 9) Account all TCP retransmits in SNMP stats properly, from Yuchung Cheng. 10) atl1e and via-rhine do not handle DMA mapping failures properly, from Neil Horman. 11) Various equal-cost multipath route fixes in ipv6 from Hannes Frederic Sowa" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits) ipv6: only static routes qualify for equal cost multipathing via-rhine: fix dma mapping errors atl1e: fix dma mapping warnings tcp: account all retransmit failures usb/net/r815x: fix cast to restricted __le32 usb/net/r8152: fix integer overflow in expression net: access page->private by using page_private net: strict_strtoul is obsolete, use kstrtoul instead drivers/net/ieee802154: don't use devm_pinctrl_get_select_default() in probe drivers/net/ethernet/cadence: don't use devm_pinctrl_get_select_default() in probe drivers/net/can/c_can: don't use devm_pinctrl_get_select_default() in probe net/usb: add relative mii functions for r815x net/tipc: use %*phC to dump small buffers in hex form qlcnic: Adding Maintainers. gre: Fix MTU sizing check for gretap tunnels pkt_sched: sch_qfq: remove forward declaration of qfq_update_agg_ts pkt_sched: sch_qfq: improve efficiency of make_eligible gso: Update tunnel segmentation to support Tx checksum offload inet: fix spacing in assignment ifb: fix oops when loading the ifb failed ...
| * net: rename busy poll socket op and globalsEliezer Tamir2013-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | Rename LL_SO to BUSY_POLL_SO Rename sysctl_net_ll_{read,poll} to sysctl_busy_{read,poll} Fix up users of these variables. Fix documentation for sysctl. a patch for the socket.7 man page will follow separately, because of limitations of my mail setup. Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2013-07-13
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove <asm/kspd.h> SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...
| * \ Merge branch '3.10-fixes' into mips-for-linux-nextRalf Baechle2013-07-12
| |\ \ | | | | | | | | | | | | | | | | This that should have been fixed but weren't, way to much, intrusive and late.
| | * | MIPS: tlbex: Fix size of area to be flushed.Ralf Baechle2013-06-26
| | | | | | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Flush TLB handlers directly after writing themJonas Gorski2013-06-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When having enabled MIPS_PGD_C0_CONTEXT, trap_init() might call the generated tlbmiss_handler_setup_pgd before it was committed to memory, causing boot failures: trap_init() |- per_cpu_trap_init() | |- TLBMISS_HANDLER_SETUP() | |- tlbmiss_handler_setup_pgd() |- flush_tlb_handlers() To avoid this, move flush_tlb_handlers() into build_tlb_refill_handler() right after they were generated. We can do this as the cache handling is initialized just before creating the tlb handlers. This issue was introduced in 3d8bfdd0307223de678962f1c1907a7cec549136 ("MIPS: Use C0_KScratch (if present) to hold PGD pointer."). Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Jayachandran C <jchandra@broadcom.com> Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/5539/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: SNI: pcit: Fix build error with CONFIG_PCI=n disabled.Ralf Baechle2013-06-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | CC arch/mips/sni/pcit.o arch/mips/sni/pcit.c:150:30: warning: ‘sni_pcit_controller’ defined but not used [-Wunused-variable] Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: SNI: pcimt: Guard sni_controller with CONFIG_PCIMarkos Chandras2013-06-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following build problem: arch/mips/sni/pcimt.c:188:30: error: 'sni_controller' defined but not used [-Werror=unused-variable] Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5547/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Sibyte: Platform: Add load address for CONFIG_SIBYTE_LITTLESURMarkos Chandras2013-06-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following build problem: mips-linux-gnu-ld:arch/mips/kernel/vmlinux.lds:253: syntax error because VMLINUX_LOAD_ADDRESS was an empty string for that platform so the vmlinux.lds.S created an invalid section entry on line 50. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: sibyte-users@bitmover.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5548/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: microMIPS: Fix POOL16C minor opcode enumTony Wu2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As pointed out by Maciej, POOL16C minor opcodes were mostly shifted by one bit. Correct those opcodes, and also add jraddiusp to the enum. Signed-off-by: Tony Wu <tung7970@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: david.daney@cavium.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5527/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Fix TLBR-use hazards for R2 cores in the TLB reload handlersRalf Baechle2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MIPS R2 documents state that an execution hazard barrier is needed after a TLBR before reading EntryLo. Original patch by Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/5526/
| | * | MIPS: Fix rtlx build error.Ralf Baechle2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CC arch/mips/kernel/rtlx.o /home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c: In function ‘file_write’: /home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c:439:23: error: unused variable ‘rt’ [-Werror=unused-variable] /home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c: In function ‘rtlx_module_init’: /home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c:523:3: error: implicit declaration of function ‘set_vi_handler’ [-Werror=implicit-function-declaration] cc1: all warnings being treated as errors Caused by 496ad9aa8ef448058e36ca7a787c61f2e63f0f54 [new helper: file_inode(file)]. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: BCM63XX: remove bogus Kconfig selectsFlorian Fainelli2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the bogus selects on USB-related symbols for 6345 and 6338, not only we do not yet support USB on BCM63XX, but they also cause the following warnings: warning: (BCM63XX_CPU_6338 && BCM63XX_CPU_6345) selects USB_OHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB && USB_OHCI_HCD) warning: (BCM63XX_CPU_6338 && BCM63XX_CPU_6345) selects USB_OHCI_BIG_ENDIAN_DESC which has unmet direct dependencies (USB_SUPPORT && USB && USB_OHCI_HCD) make[4]: Leaving directory `/home/florian/dev/linux' Just get rid of these bogus Kconfig selects because neither 6345 nor 6338 actually have built-in USB host controllers. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Patchwork: http://patchwork.linux-mips.org/patch/5497/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Fix execution hazard during watchpoint register probePaul Burton2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Writing a value to a WatchLo* register creates an execution hazard, so if its value is then read before that hazard is cleared then said value may be invalid. The mips_probe_watch_registers function must therefore clear the execution hazard between setting the match bits in a WatchLo* register & reading the register back in order to check which are set. This fixes intermittent incorrect watchpoint register probing on some MIPS cores such as interAptiv & proAptiv. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/5474/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: powertv: Drop SYS_HAS_EARLY_PRINTKMarkos Chandras2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PowerTV does not provide a prom_putchar function needed for early printk so remove this symbol for this platform. Fixes the following problem when EARLY_PRINTK is enabled for powertv: arch/mips/kernel/early_printk.c:24: undefined reference to `prom_putchar' arch/mips/kernel/early_printk.c:23: undefined reference to `prom_putchar' Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5477/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: sibyte: Amend dependencies for SIBYTE_BUS_WATCHERMarkos Chandras2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SIBYTE_BUS_WATCHER is only visible if CONFIG_SIBYTE_BCM112X or CONFIG_SIBYTE_SB1250 is selected according to the arch/mips/sibyte/Makefile. This fixes the following build problem: arch/mips/mm/cerr-sb1.c:254: undefined reference to `check_bus_watcher' Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: sibyte-users@bitmover.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5482/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Sibyte: Fix bus watcher build for BCM1x55 and BCM1x80.Ralf Baechle2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CC arch/mips/sibyte/bcm1480/bus_watcher.o CHK kernel/config_data.h arch/mips/sibyte/bcm1480/bus_watcher.c: In function ‘check_bus_watcher’: arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: error: ‘A_SCD_BUS_ERR_STATUS_DEBUG’ undeclared (first use in this function) arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: note: each undeclared identifier is reported only once for each function it appears in make[3]: *** [arch/mips/sibyte/bcm1480/bus_watcher.o] Error 1 make[2]: *** [arch/mips/sibyte/bcm1480] Error 2 make[1]: *** [arch/mips/sibyte] Error 2 make: *** [arch/mips] Error 2 The register moved around though it's otherwise the same but because of the changed address it now also has a different name. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/5514/ Reported-by: Markos Chandras <markos.chandras@imgtec.com>
| | * | MIPS: Sibyte: Fix build for SIBYTE_BW_TRACE on BCM1x55 and BCM1x80.Ralf Baechle2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CC arch/mips/mm/cerr-sb1.o arch/mips/mm/cerr-sb1.c: In function ‘sb1_cache_error’: arch/mips/mm/cerr-sb1.c:186:98: error: ‘M_BCM1480_SCD_TRACE_CFG_FREEZE’ undeclared (first use in this function) arch/mips/mm/cerr-sb1.c:186:98: note: each undeclared identifier is reported only once for each function it appears in make[1]: *** [arch/mips/mm/cerr-sb1.o] Error 1 This happens because 8deab1144b553548fb2f1b51affdd36dcd652aaa [[MIPS] Updated Sibyte headers] changed the headers but not all the users. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/5511/
| | * | MIPS: sibyte: Declare the cfe_write() buffer as constantMarkos Chandras2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The write() prototype expects a const char * as argument so declare it as such. Fixes the following build problem: arch/mips/sibyte/common/cfe_console.c:23:5: error: passing argument 2 of 'cfe_write' discards 'const' qualifier from pointer target type [-Werror] arch/mips/sibyte/common/cfe_console.c:34:4: error: passing argument 2 of 'cfe_write' makes pointer from integer without a cast [-Werror] Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: sibyte-users@bitmover.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5485/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Sibyte: Add missing sched.h headerMarkos Chandras2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's needed for the TASK_INTERRUPTIBLE definition. Fixes the following build problem: arch/mips/sibyte/common/sb_tbprof.c:235:4: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) [ralf@linux-mips.org: Ideally sched.h should be included into the actual user of TASK_INTERRUPTIBLE, <linux/wait.h> but that seems way too risky that close to a release.] Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: sibyte-users@bitmover.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5479/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: sibyte: Remove unused variable.Markos Chandras2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following build problem: arch/mips/sibyte/sb1250/bus_watcher.c: In function 'sibyte_bw_int': arch/mips/sibyte/sb1250/bus_watcher.c:179:7: error: unused variable 'bw_buf' [-Werror=unused-variable] Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: sibyte-users@bitmover.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5481/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: ath79: Fix argument for the ap136_pc_init functionMarkos Chandras2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ap136_pci_init expects a u8 pointer as an argument. Fixes the following build problem on a randconfig: arch/mips/ath79/mach-ap136.c:151:2: error: too many arguments to function 'ap136_pci_init' Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5476/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS/OCTEON: Override default address space layout.David Daney2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OCTEON II cannot execute code in the default CAC_BASE space, so we supply a value (0x8000000000000000) that does work. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5457/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: malta: Remove software reset defines from generic header.Steven J. Hill2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the software reset register and reset value definitions from the 'include/asm/mips-boards/generic.h' header file. Also clean up header and whitespace in platform file. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5456/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: malta: Move defines of reset registers and values.Steven J. Hill2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove usage of 'include/asm/mips-boards/generic.h' header file. Instead, move the defines for SOFTRES_REG and GORESET local to the platform file. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5455/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: sead3: Fix ability to perform a soft reset.Steven J. Hill2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The soft reset register address and reset value to be written are incorrect for the SEAD-3 platform. This patch fixes them such that the SEAD-3 can actually perform a soft reset instead of causing an exception. Also remove usage of 'include/asm/mips-boards/generic.h' header file. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5454/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Loongson: Fix random early boot hangAaro Koskinen2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some Loongson boards (e.g. Lemote FuLoong mini-PC) use ISA/southbridge device (CS5536 general purpose timer) for the timer interrupt. It starts running early and is already enabled during the PCI configuration, during which there is a small window in pci_read_base() when the register access is temporarily disabled. If the timer interrupts at this point, the system will hang. Fix this by adding a fixup that keeps the register access always enabled. The hang the patch fixes usually looks like this: [ 0.844000] pci 0000:00:0e.0: [1022:2090] type 00 class 0x060100 [ 0.848000] pci 0000:00:0e.0: reg 10: [io 0xb410-0xb417] [ 0.852000] pci 0000:00:0e.0: reg 14: [io 0xb000-0xb0ff] [ 0.856000] pci 0000:00:0e.0: reg 18: [io 0xb380-0xb3bf] [ 28.140000] BUG: soft lockup - CPU#0 stuck for 23s! [swapper:1] [ 28.140000] Modules linked in: [ 28.140000] irq event stamp: 37965 [ 28.140000] hardirqs last enabled at (37964): [<ffffffff80204c0c>] restore_partial+0x6c/0x13c [ 28.140000] hardirqs last disabled at (37965): [<ffffffff80204f8c>] handle_int+0x144/0x15c [ 28.140000] softirqs last enabled at (24316): [<ffffffff802381f4>] __do_softirq+0x1cc/0x258 [ 28.140000] softirqs last disabled at (24327): [<ffffffff80238420>] do_softirq+0xc8/0xd0 [ 28.140000] Cpu 0 [ 28.140000] $ 0 : 0000000000000000 00000000140044e1 980000009f090000 0000000000000001 [ 28.140000] $ 4 : 980000009f090000 0000000000000000 0000000000000100 03b7fff87fbde011 [ 28.140000] $ 8 : ffffffff812b1928 000000000001e000 043ffff87fbde011 fffffff87fbde011 [ 28.140000] $12 : 000000000000000e ffffffff807a0000 0000000000000698 0000000000000000 [ 28.140000] $16 : 0000000000000002 ffffffff81055e20 ffffffff80786810 0000000000000000 [ 28.140000] $20 : 000000000000000a ffffffff807bc244 ffffffff807e6350 ffffffff80770000 [ 28.140000] $24 : 0000000000000d80 00000000fffedbe0 [ 28.140000] $28 : 980000009f07c000 980000009f07fa10 ffffffff81050000 ffffffff802380f8 [ 28.140000] Hi : 0000000000d0fc00 [ 28.140000] Lo : 0000000000f82b40 [ 28.140000] epc : ffffffff8023810c __do_softirq+0xe4/0x258 [ 28.140000] Not tainted [ 28.140000] ra : ffffffff802380f8 __do_softirq+0xd0/0x258 [ 28.140000] Status: 140044e3 KX SX UX KERNEL EXL IE [ 28.140000] Cause : 10008400 [ 28.140000] PrId : 00006303 (ICT Loongson-2) Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4958/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Octeon: Don't clobber bootloader data structures.David Daney2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit abe77f90dc (MIPS: Octeon: Add kexec and kdump support) added a bootmem region for the kernel image itself. The problem is that this is rounded up to a 0x100000 boundary, which is memory that may not be owned by the kernel. Depending on the kernel's configuration based size, this 'extra' memory may contain data passed from the bootloader to the kernel itself, which if clobbered makes the kernel crash in various ways. The fix: Quit rounding the size up, so that we only use memory assigned to the kernel. Signed-off-by: David Daney <david.daney@cavium.com> Cc: <stable@vger.kernel.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5449/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: IP27: Fix build error if CONFIG_PCI=y and CONFIG_NUMA disabled.Ralf Baechle2013-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Then <asm-generic/topology.h> will define cpp macro as default definition for pcibus_to_node resulting in: CC arch/mips/pci/pci-ip27.o arch/mips/pci/pci-ip27.c:220:7: error: expected identifier or ‘(’ before ‘void’ arch/mips/pci/pci-ip27.c:220:12: error: expected ‘)’ before ‘(’ token make[1]: *** [arch/mips/pci/pci-ip27.o] Error 1 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-26 17:53:05 -0500