aboutsummaryrefslogtreecommitdiffstats
path: root/arch/mips
Commit message (Collapse)AuthorAge
* [MIPS] IP22: Fix detection of second HPC3 on Challenge SThomas Bogendoerfer2008-09-08
| | | | | | | | The second HPC3 could be found only on Guiness systems (Challenge-S), but not on fullhouse (Indigo2) systems. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Probe initrd header only if explicitly specifiedAtsushi Nemoto2008-09-05
| | | | | | | | | | | | | Currently init_initrd() probes initrd header at the last page of kernel image, but it is valid only if addinitrd was used. If addinitrd was not used, the area contains garbage so probing there might misdetect initrd header (magic number is not strictly robust). This patch introduces CONFIG_PROBE_INITRD_HEADER to explicitly enable this probing. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] TX39xx: Add missing local_flush_icache_range initializationAtsushi Nemoto2008-09-05
| | | | | | | | | Commmit 59e39ecd933ba49eb6efe84cbfa5597a6c9ef18a ("Fix WARNING: at kernel/smp.c:290") introduced local_flush_icache_range but lacks initialization for some TX39 case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] TXx9: Fix txx9_pcode initializationAtsushi Nemoto2008-09-05
| | | | | | | | | The txx9_pcode variable was introduced in commit fe1c2bc64f65003b39f331a8e4b0d15b235a4afd ("TXx9: Add 64-bit support") but was not initialized properly. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Fix WARNING: at kernel/smp.c:290Thomas Bogendoerfer2008-09-05
| | | | | | | | | | | trap_init issues flush_icache_range(), which uses ipi functions to get icache flushing done on all cpus. But this is done before interrupts are enabled and caused WARN_ON messages. This changeset introduces a new local_flush_icache_range() and uses it before interrupts (and additional CPUs) are enabled to avoid this problem. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Fix data bus error recoveryThomas Bogendoerfer2008-09-05
| | | | | | | | | With -ffunction-section the entries in __dbe_table aren't no longer sorted, so the lookup of exception addresses in do_be() failed for some addresses. To avoid this we now sort __dbe_table. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Ignore vmlinux.lds generated filesFlorian Fainelli2008-08-26
| | | | | | | | This patch adds the proper .gitignore file to ignore vmlinux.lds generated in arch/mips/kernel/. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] kgdb: Do not call fixup_exceptionAtsushi Nemoto2008-08-26
| | | | | | | | | kgdb_mips_notify is called on IBE/DBE/FPE/BP/TRAP/RI exception. None of them need fixup. And doing fixup for a breakpoint exception will confuse gdb. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] RB532: Do not define registers that are already definedFlorian Fainelli2008-08-26
| | | | | | | | Use the register definitions of the MPMC controller from mach-rc32434/rb.h instead of redefining them. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] IP27: Export symbol pcibus_to_node to modules.Ralf Baechle2008-08-26
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] kgdb: s/(void *)0)/NULL/Ralf Baechle2008-08-26
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] kgdb: smp_call_function's 3rd argument is a pointer.Ralf Baechle2008-08-26
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] TXx9: Fix mips_hpt_frequency initializationAtsushi Nemoto2008-08-26
| | | | | | | | | | The mips_hpt_frequency initialization code was lost in commit 94a4c32939dede9328c6e4face335eb8441fc18d (linux-mips.org) / 94a4c32939dede9328c6e4face335eb8441fc18d (kernel.org) "TXx9: Add 64-bit support". Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] emma2rh: Fix build error by header file inclusion weeding.Ralf Baechle2008-08-26
| | | | | | | | | CC arch/mips/emma2rh/markeins/setup.o In file included from arch/mips/emma2rh/markeins/setup.c:30: include/linux/ide.h:645: error: ‘CONFIG_IDE_MAX_HWIFS’ undeclared here (not in a function) make[1]: *** [arch/mips/emma2rh/markeins/setup.o] Error 1 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Jazz: Fix build error by header file inclusion weeding.Ralf Baechle2008-08-26
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Wire up new syscalls.Ralf Baechle2008-08-26
| | | | | | signalfd4, eventfd2, epoll_create1, dup3, pipe2 and inotify_init1. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Convert printk statements during kernel setup to use severity levelsMike Crowe2008-08-26
| | | | | Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* remove unneeded #include <linux/ide.h>'sAdrian Bunk2008-08-05
| | | | | | | | | | | This patch remove unneeded #include <linux/ide.h>'s. It also adds a required #include <linux/interrupt.h> that was previously implicitely pulled by ide.h Signed-off-by: Adrian Bunk <bunk@kernel.org> [bart: revert change to tests/lkdtm.c (spotted by Stephen Rothwell)] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* remove unnecessary <linux/hdreg.h> includesBartlomiej Zolnierkiewicz2008-08-05
| | | | | | | | | | | | | | | Following files don't need <linux/hdreg.h> at all: - arch/mips/jazz/setup.c - arch/sh/boards/mach-systemh/irq.c - drivers/macintosh/mediabay.c - drivers/scsi/hptiop.c - drivers/usb/storage/freecom.c - arch/powerpc/include/asm/ide.h - init/main.c Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* [MIPS] Cobalt: update defconfigYoichi Yuasa2008-07-30
| | | | | | | Select new LCD framebuffer driver. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] kgdb: add arch support for the kernel's kgdb coreJason Wessel2008-07-30
| | | | | | | | | | | | | | | | | The new kgdb architecture specific handler registers and unregisters dynamically for exceptions depending on when you configure a kgdb I/O driver. Aside from initializing the exceptions earlier in the boot process, kgdb should have no impact on a device when it is compiled in so long as an I/O module is not configured for use. There have been quite a number of contributors during the existence of this patch (see arch/mips/kernel/kgdb.c). Most recently Jason re-wrote the mips kgdb logic to use the die notification handlers. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] kgdb: Remove existing implementationJason Wessel2008-07-30
| | | | | | | | | This patch explicitly removes the kgdb implementation, for mips which is intended to be followed by a patch that adds a kgdb implementation for MIPS that makes use of the kgdb core in the kernel. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] TXx9: Kconfig cleanupAtsushi Nemoto2008-07-30
| | | | | | | Unify some entries in txx9/Kconfig. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] TXx9: Support early_printkAtsushi Nemoto2008-07-30
| | | | | | | | Kill jmr3927-specific prom_putchar and add txx9-generic prom_putchar to support early_printk. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] TXx9: Unify serial_txx9 setupAtsushi Nemoto2008-07-30
| | | | | | | | * Unify calling of early_serial_txx9_setup. * Use dedicated serial clock on RBTX4938. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] TXx9: Random cleanupAtsushi Nemoto2008-07-30
| | | | | | | | | | | | | | | | * Random cleanups spotted by checkpatch script. * Do not initialize panic_timeout. "panic=" kernel parameter can be used. * Do not add "ip=any" or "ip=bootp". This options is not board specific. * Do not add "root=/dev/nfs". This is default on CONFIG_ROOT_NFS. * Kill unused error checking. * Fix IRQ comment to match current code. * Kill some unneeded includes * ST0_ERL is already cleared in generic code. * conswitchp is initialized generic code. * __init is not needed in prototype. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] TXx9: Make tx4938-specific code more independentAtsushi Nemoto2008-07-30
| | | | | | | Make some TX4938 SoC specific code independent from board specific code. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] TXx9: Make tx3927-specific code more independentAtsushi Nemoto2008-07-30
| | | | | | | Make some TX3927 SoC specific code independent from board specific code. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] TXx9: Cleanup watchdogAtsushi Nemoto2008-07-30
| | | | | | | Unify registration of txx9wdt platform device. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] TXx9: Cleanup restart/halt/power_offAtsushi Nemoto2008-07-30
| | | | | | | | Unify machine_restart/machine_halt/pm_power_off and add fallback machine_halt routine. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] TXx9: PCI error handlingAtsushi Nemoto2008-07-30
| | | | | | | | | | | From: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Date: Thu, 24 Jul 2008 00:25:16 +0900 Subject: [PATCH] txx9: PCI error handling Add more control and detailed report on PCI error interrupt. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] TXx9: Add some pci optionsAtsushi Nemoto2008-07-30
| | | | | | | | Add pci options for backplane type, clock selection, error handling, timeout values. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Introduce pcibios_plat_setupAtsushi Nemoto2008-07-30
| | | | | | | Introduce pcibios_plat_setup for platform-specific pcibios_setup. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] TXx9: PCI fixes for tx3927/tx4927Atsushi Nemoto2008-07-30
| | | | | | | | | | * Fix tx3927 pci ops for Type-1 configuration * Fix abort checking of tx3927 pci ops * Flush write buffer to avoid spurious PCI error interrupt * Add a quirk for FPCIB backplane Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] TXx9: Fix JMR3927 irq numbersAtsushi Nemoto2008-07-30
| | | | | | | | * Fix wrong txx9_clockevent interrupt number * Fix TXX9_IRQ_BASE for JMR3927+FPCIB case Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] RB532: Flags are unsigned longAdrian Bunk2008-07-30
| | | | | | | | | | | | | | | | | | | | A recent generic change now catches such bugs: <-- snip --> ... CC arch/mips/rb532/time.o cc1: warnings being treated as errors /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/rb532/time.c: In function 'plat_time_init': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/rb532/time.c:55: error: comparison of distinct pointer types lacks a cast /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/rb532/time.c:66: error: comparison of distinct pointer types lacks a cast make[2]: *** [arch/mips/rb532/time.o] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Initialization of Alchemy boardsKevin Hickey2008-07-30
| | | | | | | | | | | | An earlier update changed some calls from simple_strotl to strict_strtol but did not account for the differences in the syntax between the calls. simple_strotl returns the integer; strict_strtol returns an error code and takes a pointer to the result. As it was, NULL was being passed in place of the result, which led to failures during kernel initialization when using YAMON. Signed-off-by: Kevin Hickey <khickey@rmicorp.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] tlb-r4k: Nuke broken paranoia error test.Ralf Baechle2008-07-30
| | | | | | | | | Bug originally found and reported by Julia Lawall <julia@diku.dk>. I decieded that the whole error check was mostly useless paranoia and should be discarded. It would only ever trigger if r3k_have_wired_reg has a wrong value. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* mips: use generic show_mem()Johannes Weiner2008-07-26
| | | | | | | | | | | | | | | | | | | Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - pages in swapcache, printed by show_swap_cache_info() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). And show_mem() does now actually print something on configurations with multiple nodes. Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dma-mapping: add the device argument to dma_mapping_error()FUJITA Tomonori2008-07-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER architecture does: This enables us to cleanly fix the Calgary IOMMU issue that some devices are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423). I think that per-device dma_mapping_ops support would be also helpful for KVM people to support PCI passthrough but Andi thinks that this makes it difficult to support the PCI passthrough (see the above thread). So I CC'ed this to KVM camp. Comments are appreciated. A pointer to dma_mapping_ops to struct dev_archdata is added. If the pointer is non NULL, DMA operations in asm/dma-mapping.h use it. If it's NULL, the system-wide dma_ops pointer is used as before. If it's useful for KVM people, I plan to implement a mechanism to register a hook called when a new pci (or dma capable) device is created (it works with hot plugging). It enables IOMMUs to set up an appropriate dma_mapping_ops per device. The major obstacle is that dma_mapping_error doesn't take a pointer to the device unlike other DMA operations. So x86 can't have dma_mapping_ops per device. Note all the POWER IOMMUs use the same dma_mapping_error function so this is not a problem for POWER but x86 IOMMUs use different dma_mapping_error functions. The first patch adds the device argument to dma_mapping_error. The patch is trivial but large since it touches lots of drivers and dma-mapping.h in all the architecture. This patch: dma_mapping_error() doesn't take a pointer to the device unlike other DMA operations. So we can't have dma_mapping_ops per device. Note that POWER already has dma_mapping_ops per device but all the POWER IOMMUs use the same dma_mapping_error function. x86 IOMMUs use device argument. [akpm@linux-foundation.org: fix sge] [akpm@linux-foundation.org: fix svc_rdma] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix bnx2x] [akpm@linux-foundation.org: fix s2io] [akpm@linux-foundation.org: fix pasemi_mac] [akpm@linux-foundation.org: fix sdhci] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix sparc] [akpm@linux-foundation.org: fix ibmvscsi] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* remove unused #include <linux/dirent.h>'sAdrian Bunk2008-07-25
| | | | | | | | | Remove some unused #include <linux/dirent.h>'s. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpiolib: allow user-selectionMichael Buesch2008-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds functionality to the gpio-lib subsystem to make it possible to enable the gpio-lib code even if the architecture code didn't request to get it built in. The archtitecture code does still need to implement the gpiolib accessor functions in its asm/gpio.h file. This patch adds the implementations for x86 and PPC. With these changes it is possible to run generic GPIO expansion cards on every architecture that implements the trivial wrapper functions. Support for more architectures can easily be added. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: David Brownell <david-b@pacbell.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds2008-07-24
|\ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: nohz: adjust tick_nohz_stop_sched_tick() call of s390 as well nohz: prevent tick stop outside of the idle loop
| * Merge branch 'linus' into timers/nohzIngo Molnar2008-07-18
| |\
| * | nohz: prevent tick stop outside of the idle loopThomas Gleixner2008-07-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Jack Ren and Eric Miao tracked down the following long standing problem in the NOHZ code: scheduler switch to idle task enable interrupts Window starts here ----> interrupt happens (does not set NEED_RESCHED) irq_exit() stops the tick ----> interrupt happens (does set NEED_RESCHED) return from schedule() cpu_idle(): preempt_disable(); Window ends here The interrupts can happen at any point inside the race window. The first interrupt stops the tick, the second one causes the scheduler to rerun and switch away from idle again and we end up with the tick disabled. The fact that it needs two interrupts where the first one does not set NEED_RESCHED and the second one does made the bug obscure and extremly hard to reproduce and analyse. Kudos to Jack and Eric. Solution: Limit the NOHZ functionality to the idle loop to make sure that we can not run into such a situation ever again. cpu_idle() { preempt_disable(); while(1) { tick_nohz_stop_sched_tick(1); <- tell NOHZ code that we are in the idle loop while (!need_resched()) halt(); tick_nohz_restart_sched_tick(); <- disables NOHZ mode preempt_enable_no_resched(); schedule(); preempt_disable(); } } In hindsight we should have done this forever, but ... /me grabs a large brown paperbag. Debugged-by: Jack Ren <jack.ren@marvell.com>, Debugged-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | | Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds2008-07-24
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: arch/mips/kernel/stacktrace.c: Heiko can't type kthread: reduce stack pressure in create_kthread and kthreadd fix core/stacktrace changes on avr32, mips, sh
| * | | arch/mips/kernel/stacktrace.c: Heiko can't typeAndrew Morton2008-07-23
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | fix core/stacktrace changes on avr32, mips, shHeiko Carstens2008-07-18
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes this type of problem: CC arch/s390/kernel/stacktrace.o arch/s390/kernel/stacktrace.c:84: warning: data definition has no type or storage class arch/s390/kernel/stacktrace.c:84: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/s390/kernel/stacktrace.c:84: warning: parameter names (without types) in function declaration arch/s390/kernel/stacktrace.c:97: warning: data definition has no type or storage class arch/s390/kernel/stacktrace.c:97: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/s390/kernel/stacktrace.c:97: warning: parameter names (without types) in function declaration caused by "stacktrace: export save_stack_trace[_tsk]" Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | flag parameters: pipeUlrich Drepper2008-07-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces the new syscall pipe2 which is like pipe but it also takes an additional parameter which takes a flag value. This patch implements the handling of O_CLOEXEC for the flag. I did not add support for the new syscall for the architectures which have a special sys_pipe implementation. I think the maintainers of those archs have the chance to go with the unified implementation but that's up to them. The implementation introduces do_pipe_flags. I did that instead of changing all callers of do_pipe because some of the callers are written in assembler. I would probably screw up changing the assembly code. To avoid breaking code do_pipe is now a small wrapper around do_pipe_flags. Once all callers are changed over to do_pipe_flags the old do_pipe function can be removed. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fd[2]; if (syscall (__NR_pipe2, fd, 0) != 0) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { printf ("pipe2(0) set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0) { puts ("pipe2(O_CLOEXEC) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | remove include/linux/pm_legacy.hAdrian Bunk2008-07-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the obsolete and no longer used include/linux/pm_legacy.h Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Pavel Machek <pavel@suse.cz> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-16 22:15:47 -0500