aboutsummaryrefslogtreecommitdiffstats
path: root/arch/microblaze
Commit message (Collapse)AuthorAge
* microblaze: Clear all MSR flags on the first kernel instructionMichal Simek2012-03-23
| | | | | | | | | | The main reason is bug because of dynamic TLB allocation. U-BOOT didn't disable dcache and then writing to physical address from ASM wan't visible for reading through MMU. Disabling caches and clearing all flags from previous code is good to do so. Signed-off-by: Michal Simek <monstr@monstr.eu>
* microblaze: Use node name instead of compatible stringMichal Simek2012-03-23
| | | | | | | | | | | | | Change report in bootlog: Origin: xlnx,xps-intc-1.00.a #0 at 0xc8000000, num_irq=6, edge=0x4 xlnx,xps-timer-1.00.a #0 at 0xc8004000, irq=2 New: interrupt-controller #0 at 0xc8000000, num_irq=6, edge=0x4 system-timer #0 at 0xc8004000, irq=2 Signed-off-by: Michal Simek <monstr@monstr.eu>
* microblaze: Fix mapin_ram functionMichal Simek2012-03-23
| | | | | | | | | | Fix how many pages are allocated in mapin_ram. It is lowmem_size not setup CONFIG_LOWMEM_SIZE because it is the same for all systems. Which means that wrong pages are allocated if memory size is smaller than CONFIG_LOWMEM_SIZE. It has dramatic impact on bootup time. On sp605 MMU full hw design is 7s. Signed-off-by: Michal Simek <monstr@monstr.eu>
* microblaze: Highmem supportMichal Simek2012-03-23
| | | | | | The first highmem implementation. Signed-off-by: Michal Simek <monstr@monstr.eu>
* microblaze: Use active regionsMichal Simek2012-03-23
| | | | | | Register lowmem active regions. Signed-off-by: Michal Simek <monstr@monstr.eu>
* microblaze: Show more detailed information about memoryMichal Simek2012-03-23
| | | | | | | Microblaze MMU is similar to ppc that's why ppc layout was reused. Signed-off-by: Michal Simek <monstr@monstr.eu>
* microblaze: Introduce fixmapMichal Simek2012-03-23
| | | | | | Fixmap will be used for highmem support. Signed-off-by: Michal Simek <monstr@monstr.eu>
* microblaze: mm: Fix lowmem max memory size limitsMichal Simek2012-03-23
| | | | | | | | | | Use CONFIG_LOWMEM_SIZE if system has larger ram size. For system with larger ram size, enable HIGMEM support. Also setup limitation for memblock and use memblock allocation in lowmem region. Signed-off-by: Michal Simek <monstr@monstr.eu>
* microblaze: mm: Use ZONE_DMA instead of ZONE_NORMALMichal Simek2012-03-23
| | | | | | We should use ZONE_DMA because all address space is dma-able. Signed-off-by: Michal Simek <monstr@monstr.eu>
* microblaze: trivial: Fix typo fault in timer.cMichal Simek2012-03-19
| | | | Signed-off-by: Michal Simek <monstr@monstr.eu>
* microblaze: Use vsprintf extention %pf with builtin_return_addressJoe Perches2012-03-19
| | | | | | | | | | | Emit the function name not the address when possible. builtin_return_address() gives an address. When building a kernel with CONFIG_KALLSYMS, emit the actual function name not the address. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
* microblaze: Add PVR version string for MB 8.20.b and 8.30.aMichal Simek2012-03-19
| | | | | | Just extend PVR reg decoding. Signed-off-by: Michal Simek <monstr@monstr.eu>
* microblaze: Fix makefile to work with latest toolchainMichal Simek2012-03-19
| | | | | | | | When building with latest binutils, vmlinux includes some sections which need to be stripped out when building the binary image. Signed-off-by: Michal Simek <monstr@monstr.eu>
* microblaze: Fix typo in early_printk.cMasanari Iida2012-03-19
| | | | | | | | Correct spelling "remaping" to "remapping" in arch/microblaze/kernel/early_printk.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
* Revert "microblaze: Add topology init"Michal Simek2012-01-31
| | | | | | | | | | | | | | | | | | | This reverts commit d761f0c521868e59cd0bc59159cbdb4686fe210d. Patch: "cpu: Register a generic CPU device on architectures that currently do not" (sha1: 9f13a1fd452f11c18004ba2422a6384b424ec8a9) selects GENERIC_CPU_DEVICES for Microblaze which register cpu. My patch was done in the same time that's why cpu was registered twice which caused this warning log: ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xb0/0xdc() sysfs: cannot create duplicate filename '/devices/system/cpu/cpu0' Modules linked in: ... Signed-off-by: Michal Simek <monstr@monstr.eu>
* microblaze: generic atomic64 supportDaniel Borkmann2012-01-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This tiny patch adds generic atomic64 support for the Microblaze architecture. The patch is against the latest linux-2.6-microblaze tree. It also fixes the kernel build for microblaze: Error log: CC kernel/trace/trace_clock.o kernel/trace/trace_clock.c:117: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'trace_counter' kernel/trace/trace_clock.c: In function 'trace_clock_counter': kernel/trace/trace_clock.c:126: error: implicit declaration of function 'atomic64_add_return' kernel/trace/trace_clock.c:126: error: 'trace_counter' undeclared (first use in this function) kernel/trace/trace_clock.c:126: error: (Each undeclared identifier is reported only once kernel/trace/trace_clock.c:126: error: for each function it appears in.) make[2]: *** [kernel/trace/trace_clock.o] Error 1 make[1]: *** [kernel/trace] Error 2 make: *** [kernel] Error 2 Signed-off-by: Ariane Keller <ariane.keller@tik.ee.ethz.ch> Signed-off-by: Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch> Signed-off-by: Michal Simek <monstr@monstr.eu>
* Merge branch 'for-linus' of ↵Linus Torvalds2012-01-17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit: (29 commits) audit: no leading space in audit_log_d_path prefix audit: treat s_id as an untrusted string audit: fix signedness bug in audit_log_execve_info() audit: comparison on interprocess fields audit: implement all object interfield comparisons audit: allow interfield comparison between gid and ogid audit: complex interfield comparison helper audit: allow interfield comparison in audit rules Kernel: Audit Support For The ARM Platform audit: do not call audit_getname on error audit: only allow tasks to set their loginuid if it is -1 audit: remove task argument to audit_set_loginuid audit: allow audit matching on inode gid audit: allow matching on obj_uid audit: remove audit_finish_fork as it can't be called audit: reject entry,always rules audit: inline audit_free to simplify the look of generic code audit: drop audit_set_macxattr as it doesn't do anything audit: inline checks for not needing to collect aux records audit: drop some potentially inadvisable likely notations ... Use evil merge to fix up grammar mistakes in Kconfig file. Bad speling and horrible grammar (and copious swearing) is to be expected, but let's keep it to commit messages and comments, rather than expose it to users in config help texts or printouts.
| * audit: inline audit_syscall_entry to reduce burden on archsEric Paris2012-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | Every arch calls: if (unlikely(current->audit_context)) audit_syscall_entry() which requires knowledge about audit (the existance of audit_context) in the arch code. Just do it all in static inline in audit.h so that arch's can remain blissfully ignorant. Signed-off-by: Eric Paris <eparis@redhat.com>
| * Audit: push audit success and retcode into arch ptrace.hEric Paris2012-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The audit system previously expected arches calling to audit_syscall_exit to supply as arguments if the syscall was a success and what the return code was. Audit also provides a helper AUDITSC_RESULT which was supposed to simplify things by converting from negative retcodes to an audit internal magic value stating success or failure. This helper was wrong and could indicate that a valid pointer returned to userspace was a failed syscall. The fix is to fix the layering foolishness. We now pass audit_syscall_exit a struct pt_reg and it in turns calls back into arch code to collect the return value and to determine if the syscall was a success or failure. We also define a generic is_syscall_success() macro which determines success/failure based on if the value is < -MAX_ERRNO. This works for arches like x86 which do not use a separate mechanism to indicate syscall failure. We make both the is_syscall_success() and regs_return_value() static inlines instead of macros. The reason is because the audit function must take a void* for the regs. (uml calls theirs struct uml_pt_regs instead of just struct pt_regs so audit_syscall_exit can't take a struct pt_regs). Since the audit function takes a void* we need to use static inlines to cast it back to the arch correct structure to dereference it. The other major change is that on some arches, like ia64, MIPS and ppc, we change regs_return_value() to give us the negative value on syscall failure. THE only other user of this macro, kretprobe_example.c, won't notice and it makes the value signed consistently for the audit functions across all archs. In arch/sh/kernel/ptrace_64.c I see that we were using regs[9] in the old audit code as the return value. But the ptrace_64.h code defined the macro regs_return_value() as regs[3]. I have no idea which one is correct, but this patch now uses the regs_return_value() function, so it now uses regs[3]. For powerpc we previously used regs->result but now use the regs_return_value() function which uses regs->gprs[3]. regs->gprs[3] is always positive so the regs_return_value(), much like ia64 makes it negative before calling the audit code when appropriate. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com> [for x86 portion] Acked-by: Tony Luck <tony.luck@intel.com> [for ia64] Acked-by: Richard Weinberger <richard@nod.at> [for uml] Acked-by: David S. Miller <davem@davemloft.net> [for sparc] Acked-by: Ralf Baechle <ralf@linux-mips.org> [for mips] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [for ppc]
* | Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds2012-01-17
|\ \ | | | | | | | | | | | | | | | * 'next' of git://git.monstr.eu/linux-2.6-microblaze: USB: EHCI: Don't use NO_IRQ in xilinx ehci driver microblaze: Add topology init
| * | microblaze: Add topology initMichal Simek2012-01-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Init topology subsystem by cpu registration. Microblaze Linux kernel is fauling by "Oops: kernel access of bad area, sig: 11" because cpu is not initialized. Signed-off-by: Michal Simek <monstr@monstr.eu>
* | | Merge branch 'kbuild' of ↵Linus Torvalds2012-01-16
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: Kbuild: Use dtc's -d (dependency) option dtc: Implement -d option to write out a dependency file kbuild: Fix comment in Makefile.lib scripts/genksyms: clean lex/yacc generated files kbuild: Correctly deal with make options which contain an "s"
| * | Kbuild: Use dtc's -d (dependency) optionStephen Warren2012-01-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This hooks dtc into Kbuild's dependency system. Thus, for example, "make dtbs" will rebuild tegra-harmony.dtb if only tegra20.dtsi has changed yet tegra-harmony.dts has not. The previous lack of this feature recently caused me to have very confusing "git bisect" results. For ARM, it's obvious what to add to $(targets). I'm not familiar enough with other architectures to know what to add there. Powerpc appears to already add various .dtb files into $(targets), but the other archs may need something added to $(targets) to work. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> [mmarek: Dropped arch/c6x part to avoid merging commits from the middle of the merge window] Signed-off-by: Michal Marek <mmarek@suse.cz>
* | | Merge branch 'linux-next' of ↵Linus Torvalds2012-01-11
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (80 commits) x86/PCI: Expand the x86_msi_ops to have a restore MSIs. PCI: Increase resource array mask bit size in pcim_iomap_regions() PCI: DEVICE_COUNT_RESOURCE should be equal to PCI_NUM_RESOURCES PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT) PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB x86/PCI: amd: factor out MMCONFIG discovery PCI: Enable ATS at the device state restore PCI: msi: fix imbalanced refcount of msi irq sysfs objects PCI: kconfig: English typo in pci/pcie/Kconfig PCI/PM/Runtime: make PCI traces quieter PCI: remove pci_create_bus() xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus() x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented() x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources sparc/PCI: convert to pci_create_root_bus() sh/PCI: convert to pci_scan_root_bus() for correct root bus resources powerpc/PCI: convert to pci_create_root_bus() powerpc/PCI: split PHB part out of pcibios_map_io_space() ... Fix up conflicts in drivers/pci/msi.c and include/linux/pci_regs.h due to the same patches being applied in other branches.
| * | | microblaze/PCI: use pci_scan_root_bus()Bjorn Helgaas2012-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Microblaze doesn't need to replace pci_scan_child_bus() or do anything special before pci_bus_add_devices(), so we can use the more generic PCI path in pci_scan_root_bus(). CC: Michal Simek <monstr@monstr.eu> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | microblaze/PCI: convert to pci_create_root_bus() for correct root bus resourcesBjorn Helgaas2012-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert from pci_create_bus() to pci_create_root_bus(). This way the root bus resources are correct immediately. This patch doesn't fix a problem because microblaze fixed the resources before scanning the bus, but it makes microblaze more consistent with other architectures. It also allows us to use the pci_scan_root_bus() path safely. CC: Michal Simek <monstr@monstr.eu> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | microblaze/PCI: make pcibios_setup_phb_resources() staticBjorn Helgaas2012-01-06
| | | | | | | | | | | | | | | | | | | | | | | | CC: Michal Simek <monstr@monstr.eu> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | microblaze/PCI: fix pci_bus_for_each_resource() usageBjorn Helgaas2012-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pci_bus_for_each_resource() iterator sets "res" itself, so there's no need to look it up in the bus->resource[] table. Logically part of 89a74ecccd and 8a66da71fa. CC: Michal Simek <monstr@monstr.eu> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI: MicroBlaze: convert pcibios_set_master() to a non-inlined functionMyron Stowe2012-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch converts MicroBlaze's architecture-specific 'pcibios_set_master()' routine to a non-inlined function. This will allow follow on patches to create a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over- ridden by architecture-specific code. Converting 'pci_bios_set_master()' to a non-inlined function will allow MicroBlaze's 'pcibios_set_master()' implementation to remain architecture-specific after the generic version is introduced and thus, not change current behavior. No functional change. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | | | cpu: Register a generic CPU device on architectures that currently do notBen Hutchings2012-01-11
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | frv, h8300, m68k, microblaze, openrisc, score, um and xtensa currently do not register a CPU device. Add the config option GENERIC_CPU_DEVICES which causes a generic CPU device to be registered for each present CPU, and make all these architectures select it. Richard Weinberger <richard@nod.at> covered UML and suggested using per_cpu. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds2012-01-10
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lib: use generic pci_iomap on all architectures Many architectures don't want to pull in iomap.c, so they ended up duplicating pci_iomap from that file. That function isn't trivial, and we are going to modify it https://lkml.org/lkml/2011/11/14/183 so the duplication hurts. This reduces the scope of the problem significantly, by moving pci_iomap to a separate file and referencing that from all architectures. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: alpha: drop pci_iomap/pci_iounmap from pci-noop.c mn10300: switch to GENERIC_PCI_IOMAP mn10300: add missing __iomap markers frv: switch to GENERIC_PCI_IOMAP tile: switch to GENERIC_PCI_IOMAP tile: don't panic on iomap sparc: switch to GENERIC_PCI_IOMAP sh: switch to GENERIC_PCI_IOMAP powerpc: switch to GENERIC_PCI_IOMAP parisc: switch to GENERIC_PCI_IOMAP mips: switch to GENERIC_PCI_IOMAP microblaze: switch to GENERIC_PCI_IOMAP arm: switch to GENERIC_PCI_IOMAP alpha: switch to GENERIC_PCI_IOMAP lib: add GENERIC_PCI_IOMAP lib: move GENERIC_IOMAP to lib/Kconfig Fix up trivial conflicts due to changes nearby in arch/{m68k,score}/Kconfig
| * | | microblaze: switch to GENERIC_PCI_IOMAPMichael S. Tsirkin2011-11-28
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | microblaze copied pci_iomap from generic code, probably to avoid pulling the rest of iomap.c in. Since that's in a separate file now, we can reuse the common implementation. The only difference is handling of nocache flag, that turns out to be done correctly by the generic code since arch/microblaze/include/asm/io.h defines ioremap_nocache same as ioremap. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* | | Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds2012-01-10
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Wire-up new system calls microblaze: Remove NO_IRQ from architecture input: xilinx_ps2: Don't use NO_IRQ block: xsysace: Don't use NO_IRQ microblaze: Trivial asm fix microblaze: Fix debug message in module microblaze: Remove eprintk macro microblaze: Send CR before LF for early console microblaze: Change NO_IRQ to 0 microblaze: Use irq_of_parse_and_map for timer microblaze: intc: Change variable name microblaze: Use of_find_compatible_node for timer and intc microblaze: Add __cmpdi2 microblaze: Synchronize __pa __va macros
| * | | microblaze: Wire-up new system callsMichal Simek2012-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wire up three system calls sendmmsg/process_vm_readv/process_vm_writev All tested by testing apps. Look at: net: Add sendmmsg socket system call (sha1: 228e548e602061b08ee8e8966f567c12aa079682) Cross Memory Attach (sha1: fcf634098c00dd9cd247447368495f0b79be12d1) Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | | microblaze: Remove NO_IRQ from architectureMichal Simek2012-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NO_IRQ shouldn't be used by any driver. All Microblaze drivers are fixed that's why NO_IRQ can be removed. Also fix pci-common.c which has references to NO_IRQ removed. Signed-off-by: Michal Simek <monstr@monstr.eu> Reviewed-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | microblaze: Trivial asm fixMichal Simek2012-01-05
| | | | | | | | | | | | | | | | | | | | | | | | Just replace one dot with comma. New binutils can detect it. Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | | microblaze: Fix debug message in moduleMichal Simek2012-01-05
| | | | | | | | | | | | | | | | | | | | | | | | Trivial fix. Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | | microblaze: Remove eprintk macroMichal Simek2012-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | eprintk macro was used for printing early_printk messages. Early console registration was changed that's why this is not needed. Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | | microblaze: Send CR before LF for early consoleMichal Simek2012-01-05
| | | | | | | | | | | | | | | | | | | | | | | | This patch fixes problem with measuring tools. Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | | microblaze: Change NO_IRQ to 0Michal Simek2012-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As has been discussed many times[1], Using NO_IRQ set to anything other than 0 is bug waiting to happen since many drivers follow the pattern "if (!irq)" for testing whether or not an irq has been set. This patch changes the Microblaze NO_IRQ setting from -1 to 0 to bring it in line with most of the rest of the kernel. It also prepares for Microblaze eventually supporting multiple interrupt controllers by breaking the assumption that hwirq# == Linux IRQ#. The Linux IRQ number is just a cookie with no guarantee of a direct relationship with the hardware irq arrangement. At this point, Microblaze interrupt handling only supports only one instance of one kind of interrupt controller (xilinx_intc). This change shouldn't affect any architecture code outside of the interrupt controller driver and the irq_of mapping. Updated to 3.2 and to use irq_data.hwirq by Rob Herring. Tested and fixed by Michal Simek. [1] http://lkml.org/lkml/2005/11/21/221 Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | | microblaze: Use irq_of_parse_and_map for timerMichal Simek2012-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is necessary to call generic function for irq finding. The main reason is that this generic function calls irq_create_of_mapping which can add some shift because of NO_IRQ. Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | | microblaze: intc: Change variable nameMichal Simek2012-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | intr_type is mask - change name. s/intr_type/intr_mask/g Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | | microblaze: Use of_find_compatible_node for timer and intcMichal Simek2012-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Calling of_find_compatible_node instead of calling private code which does the same. Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | | microblaze: Add __cmpdi2Michal Simek2012-01-05
| | | | | | | | | | | | | | | | | | | | | | | | Some new kernel configurations require __cmpdi2 function. Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | | microblaze: Synchronize __pa __va macrosMichal Simek2012-01-05
| |/ / | | | | | | | | | | | | | | | noMMU and MMU system use the same macros - synchronize them. Signed-off-by: Michal Simek <monstr@monstr.eu>
* | | Merge branch 'pm-for-linus' of ↵Linus Torvalds2012-01-08
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) PM / Hibernate: Implement compat_ioctl for /dev/snapshot PM / Freezer: fix return value of freezable_schedule_timeout_killable() PM / shmobile: Allow the A4R domain to be turned off at run time PM / input / touchscreen: Make st1232 use device PM QoS constraints PM / QoS: Introduce dev_pm_qos_add_ancestor_request() PM / shmobile: Remove the stay_on flag from SH7372's PM domains PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode PM: Drop generic_subsys_pm_ops PM / Sleep: Remove forward-only callbacks from AMBA bus type PM / Sleep: Remove forward-only callbacks from platform bus type PM: Run the driver callback directly if the subsystem one is not there PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412. PM / Sleep: Merge internal functions in generic_ops.c PM / Sleep: Simplify generic system suspend callbacks PM / Hibernate: Remove deprecated hibernation snapshot ioctls PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled() ARM: S3C64XX: Implement basic power domain support PM / shmobile: Use common always on power domain governor ... Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused XBT_FORCE_SLEEP bit
| * \ \ Merge branch 'pm-freezer' of ↵Rafael J. Wysocki2011-11-23
| |\ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into pm-freezer * 'pm-freezer' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc: (24 commits) freezer: fix wait_event_freezable/__thaw_task races freezer: kill unused set_freezable_with_signal() dmatest: don't use set_freezable_with_signal() usb_storage: don't use set_freezable_with_signal() freezer: remove unused @sig_only from freeze_task() freezer: use lock_task_sighand() in fake_signal_wake_up() freezer: restructure __refrigerator() freezer: fix set_freezable[_with_signal]() race freezer: remove should_send_signal() and update frozen() freezer: remove now unused TIF_FREEZE freezer: make freezing() test freeze conditions in effect instead of TIF_FREEZE cgroup_freezer: prepare for removal of TIF_FREEZE freezer: clean up freeze_processes() failure path freezer: kill PF_FREEZING freezer: test freezable conditions while holding freezer_lock freezer: make freezing indicate freeze condition in effect freezer: use dedicated lock instead of task_lock() + memory barrier freezer: don't distinguish nosig tasks on thaw freezer: remove racy clear_freeze_flag() and set PF_NOFREEZE on dead tasks freezer: rename thaw_process() to __thaw_task() and simplify the implementation ...
| | * | freezer: remove now unused TIF_FREEZETejun Heo2011-11-21
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-arch@vger.kernel.org
* | | | Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2012-01-07
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes queued in gpio/next for the start of the 3.3 merge window * tag 'gpio-for-linus-20120104' of git://git.secretlab.ca/git/linux-2.6: gpio: Add decode of WM8994 GPIO configuration gpio: Convert GPIO drivers to module_platform_driver gpio: Fix typo in comment in Samsung driver gpio: Explicitly index samsung_gpio_cfgs gpio: Add Linus Walleij as gpio co-maintainer of: Add device tree selftests of: create of_phandle_args to simplify return of phandle parsing data gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags() gpio/microblaze: Eliminate duplication of of_get_named_gpio_flags() gpiolib: output basic details and consolidate gpio device drivers pch_gpio: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor pch_gpio: Support new device LAPIS Semiconductor ML7831 IOH spi/pl022: make the chip deselect handling thread safe spi/pl022: add support for pm_runtime autosuspend spi/pl022: disable the PL022 block when unused spi/pl022: move device disable to workqueue thread spi/pl022: skip default configuration before suspending spi/pl022: fix build warnings spi/pl022: only enable RX interrupts when TX is complete
| * | | | gpio/microblaze: Eliminate duplication of of_get_named_gpio_flags()Grant Likely2011-12-12
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of_reset_gpio_handle() is largely a cut-and-paste copy of of_get_named_gpio_flags(). There really isn't any reason for the split, so this patch deletes the duplicate function Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Michal Simek <monstr@monstr.eu>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-17 23:28:40 -0500