aboutsummaryrefslogtreecommitdiffstats
path: root/arch/i386
Commit message (Collapse)AuthorAge
* [PATCH] PCI: fix for Toshiba ohci1394 quirkJesse Barnes2005-11-10
| | | | | | | | | | | | | | | | | | | | | After much testing and agony, I've discovered that my previous ohci1394 quirk for Toshiba laptops is not 100% reliable. It apparently fails to do the interrupt line change either correctly or in time, since in about 2 out of 5 boots, the kernel's irqdebug code will *still* disable irq 11 when the ohci1394 driver is loaded (at pci_enable_device time I think). This patch switches things around a little in the workaround. First, it removes the mdelay. I didn't see a need for it and my testing has shown that it's not necessary for the quirk to work. Secondly, instead of trying to change the interrupt line to what ACPI tells us it should be, this patch makes the quirk use the value in the PCI_INTERRUPT_LINE register. On this laptop at least, that seems to be the right thing to do, though additional testing on other laptops and/or with actual firewire devices would be appreciated. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i386: EXPORT_SYMBOL(screen_info) even #ifndef CONFIG_VTAdrian Bunk2005-11-09
| | | | | | | | | | | | The folllowing modules require screen_info but don't depend on CONFIG_VT: - vga16fb.ko - intelfb.ko Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: resched and cpu_idle reworkNick Piggin2005-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make some changes to the NEED_RESCHED and POLLING_NRFLAG to reduce confusion, and make their semantics rigid. Improves efficiency of resched_task and some cpu_idle routines. * In resched_task: - TIF_NEED_RESCHED is only cleared with the task's runqueue lock held, and as we hold it during resched_task, then there is no need for an atomic test and set there. The only other time this should be set is when the task's quantum expires, in the timer interrupt - this is protected against because the rq lock is irq-safe. - If TIF_NEED_RESCHED is set, then we don't need to do anything. It won't get unset until the task get's schedule()d off. - If we are running on the same CPU as the task we resched, then set TIF_NEED_RESCHED and no further action is required. - If we are running on another CPU, and TIF_POLLING_NRFLAG is *not* set after TIF_NEED_RESCHED has been set, then we need to send an IPI. Using these rules, we are able to remove the test and set operation in resched_task, and make clear the previously vague semantics of POLLING_NRFLAG. * In idle routines: - Enter cpu_idle with preempt disabled. When the need_resched() condition becomes true, explicitly call schedule(). This makes things a bit clearer (IMO), but haven't updated all architectures yet. - Many do a test and clear of TIF_NEED_RESCHED for some reason. According to the resched_task rules, this isn't needed (and actually breaks the assumption that TIF_NEED_RESCHED is only cleared with the runqueue lock held). So remove that. Generally one less locked memory op when switching to the idle thread. - Many idle routines clear TIF_POLLING_NRFLAG, and only set it in the inner most polling idle loops. The above resched_task semantics allow it to be set until before the last time need_resched() is checked before going into a halt requiring interrupt wakeup. Many idle routines simply never enter such a halt, and so POLLING_NRFLAG can be always left set, completely eliminating resched IPIs when rescheduling the idle task. POLLING_NRFLAG width can be increased, to reduce the chance of resched IPIs. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Con Kolivas <kernel@kolivas.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: disable preempt in idle tasksNick Piggin2005-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Run idle threads with preempt disabled. Also corrected a bugs in arm26's cpu_idle (make it actually call schedule()). How did it ever work before? Might fix the CPU hotplugging hang which Nigel Cunningham noted. We think the bug hits if the idle thread is preempted after checking need_resched() and before going to sleep, then the CPU offlined. After calling stop_machine_run, the CPU eventually returns from preemption and into the idle thread and goes to sleep. The CPU will continue executing previous idle and have no chance to call play_dead. By disabling preemption until we are ready to explicitly schedule, this bug is fixed and the idle threads generally become more robust. From: alexs <ashepard@u.washington.edu> PPC build fix From: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> MIPS build fix Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds2005-11-07
|\
| * [CPUFREQ] kzalloc conversions for i386 drivers.Dave Jones2005-10-20
| | | | | | | | Signed-off-by: Dave Jones <davej@redhat.com>
| * [CPUFREQ] Remove preempt_disable from powernow-k8Dave Jones2005-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | Via reading the code, my understanding is that powernow-k8 uses preempt_disable to ensure that driver->target doesn't migrate across cpus whilst it's accessing per processor registers, however set_cpus_allowed will provide this for us. Additionally, remove schedule() calls from set_cpus_allowed as set_cpus_allowed ensures that you're executing on the target processor on return. Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dave Jones <davej@redhat.com>
* | [PATCH] unexport phys_proc_id and cpu_core_idAdrian Bunk2005-11-07
| | | | | | | | | | | | | | | | | | EXPORT_SYMBOL's for phys_proc_id and cpu_core_id were added this year but never used. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Kprobes: preempt_disable/enable() simplificationAnanth N Mavinakayanahalli2005-11-07
| | | | | | | | | | | | | | | | | | | | | | Reorganize the preempt_disable/enable calls to eliminate the extra preempt depth. Changes based on Paul McKenney's review suggestions for the kprobes RCU changeset. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Kprobes: Use RCU for (un)register synchronization - arch changesAnanth N Mavinakayanahalli2005-11-07
| | | | | | | | | | | | | | | | | | | | | | | | Changes to the arch kprobes infrastructure to take advantage of the locking changes introduced by usage of RCU for synchronization. All handlers are now run without any locks held, so they have to be re-entrant or provide their own synchronization. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Kprobes: Track kprobe on a per_cpu basis - i386 changesAnanth N Mavinakayanahalli2005-11-07
| | | | | | | | | | | | | | | | | | | | | | I386 changes to track kprobe execution on a per-cpu basis. We now track the kprobe state machine independently on each cpu, using an arch specific kprobe control block. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Kprobes: rearrange preempt_disable/enable() callsAnanth N Mavinakayanahalli2005-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following set of patches are aimed at improving kprobes scalability. We currently serialize kprobe registration, unregistration and handler execution using a single spinlock - kprobe_lock. With these changes, kprobe handlers can run without any locks held. It also allows for simultaneous kprobe handler executions on different processors as we now track kprobe execution on a per processor basis. It is now necessary that the handlers be re-entrant since handlers can run concurrently on multiple processors. All changes have been tested on i386, ia64, ppc64 and x86_64, while sparc64 has been compile tested only. The patches can be viewed as 3 logical chunks: patch 1: Reorder preempt_(dis/en)able calls patches 2-7: Introduce per_cpu data areas to track kprobe execution patches 8-9: Use RCU to synchronize kprobe (un)registration and handler execution. Thanks to Maneesh Soni, James Keniston and Anil Keshavamurthy for their review and suggestions. Thanks again to Anil, Hien Nguyen and Kevin Stafford for testing the patches. This patch: Reorder preempt_disable/enable() calls in arch kprobes files in preparation to introduce locking changes. No functional changes introduced by this patch. Signed-off-by: Ananth N Mavinakayahanalli <ananth@in.ibm.com> Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] consolidate sys_ptrace()Christoph Hellwig2005-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sys_ptrace boilerplate code (everything outside the big switch statement for the arch-specific requests) is shared by most architectures. This patch moves it to kernel/ptrace.c and leaves the arch-specific code as arch_ptrace. Some architectures have a too different ptrace so we have to exclude them. They continue to keep their implementations. For sh64 I had to add a sh64_ptrace wrapper because it does some initialization on the first call. For um I removed an ifdefed SUBARCH_PTRACE_SPECIAL block, but SUBARCH_PTRACE_SPECIAL isn't defined anywhere in the tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-By: David Howells <dhowells@redhat.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Move Kprobes and Oprofile to "Instrumentation Support" menuPrasanna S Panchamukhi2005-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Andrew Morton suggested to move kprobes from kernel hacking menu, since kernel hacking menu is in-appropriate for the Kprobes. This patch moves Kprobes and Oprofile under instrumentation menu. (akpm: it's not a natural fit, but things like djprobes and the s390 guys' statistics library need a home) Signed-of-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Philippe Elie <phil.el@wanadoo.fr> Cc: John Levon <levon@movementarian.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] x86: add MCE resumeShaohua Li2005-11-07
| | | | | | | | | | | | | | | | | | | | It's widely seen a MCE non-fatal error reported after resume. It seems MCE resume is lacked under ia32. This patch tries to fix the gap. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] arch/i386/kernel/scx200.c should #include <linux/scx200_gpio.h>Adrian Bunk2005-11-07
| | | | | | | | | | | | | | | | | | Every file should #include the header files containing the prototypes of its global functions Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] arch/i386/kernel/reboot_fixups.c should #include <linux/reboot_fixups.h>Adrian Bunk2005-11-07
| | | | | | | | | | | | | | | | | | Every file should #include the header files containing the prototypes of its global functions Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] arch/i386/kernel/ldt.c should #include <asm/mmu_context.h>Adrian Bunk2005-11-07
| | | | | | | | | | | | | | | | | | Every file should #include the header files containing the prototypes of its global functions Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] i386: LVT entries remaining unmasked on rebootZwane Mwaikambo2005-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Excerpt from bugzilla entry http://bugzilla.kernel.org/show_bug.cgi?id=5518 "i386 version of Reboot-through-BIOS is unsafe: it forgets to mask APIC LVT interrupts before jumping to a BIOS entry point. As a result, BIOS ends up bombarded with interrupts early on boot. The BIOS does not expect it since following a "normal" hardware cpu reset, all APIC LVT registers have the Mask bit (16) set and can't generate interrupts. For example, the version of Phoenix BIOS used by VMware enables interrupts for the first time before masking/clearing APIC LVT. The APIC Timer LVT register is still set up for a timer interrupt delivery with a high vector from the previous Linux incarnation (0xef in our case). The BIOS has not fully initialized its IDT at this point and the real mode gate for 0xef remains all zeros. Vector 0xef dispatches BIOS to address 0:0, BIOS takes a #GP and eventually hangs. machine_shutdown() does attempt to shut down APIC before jumping to BIOS, but it is ineffective" Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk> Cc: "Seth, Rohit" <rohit.seth@intel.com> Cc: Zachary Amsden <zach@vmware.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] arch/i386: Use ARRAY_SIZE macroTobias Klauser2005-11-07
| | | | | | | | | | | | | | | | Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] reset tss->io_bitmap_owner in sys_ioperm()Bart Oldeman2005-11-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | my patch "x86: initialise tss->io_bitmap_owner to something" (commit ID d5cd4aadd3d220afac8e3e6d922e333592551f7d) introduced a problem with a program (DOSEMU) that called ioperm after already doing some port i/o. The problem is that a process switch return causes tss->io_bitmap_base to be set to IO_BITMAP_OFFSET so that the fault (that *really* sets the io bitmap) never triggers. This fixes that regression. Signed-off-by: Bart Oldeman <bartoldeman@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] toshiba_ohci1394_dmi_table should be __devinitdata, not __devinitRoland Dreier2005-11-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I don't really understand why gcc gives the error it does, but without this patch, when building with CONFIG_HOTPLUG=n, I get errors like: CC arch/x86_64/pci/../../i386/pci/fixup.o arch/x86_64/pci/../../i386/pci/fixup.c: In function `pci_fixup_i450nx': arch/x86_64/pci/../../i386/pci/fixup.c:13: error: pci_fixup_i450nx causes a section type conflict The change is obviously correct: an array should be declared __devinitdata rather that __devinit. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Martin J. Bligh <mbligh@mbligh.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Revert "i386: move apic init in init_IRQs"Linus Torvalds2005-10-31
| | | | | | | | | | | | | | | | Commit f2b36db692b7ff6972320ad9839ae656a3b0ee3e causes a bootup hang on at least one machine. Revert for now until we understand why. The old code may be ugly, but it works. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] i386: CONFIG_PC removalArthur Othieno2005-10-31
| | | | | | | | | | | | | | | | | | CONFIG_PC is left-over cruft after the introduction of CONFIG_X86_PC with the subarch split. Remove it, and fixup the remaining users to depend on CONFIG_X86_PC instead. Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] fix missing includesTim Schmielau2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] hpet-RTC: cache the comparator registerClemens Ladisch2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | Reads from an HPET register require a round trip to the south bridge and are almost as slow as PCI reads. By caching the last value we've written to the comparator register, we can eliminate all HPET reads from the fast path in the emulated RTC interrupt handler. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] hpet-RTC: fix timer config register accessesClemens Ladisch2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure that the RTC timer is in non-periodic mode; some stupid BIOS might have initialized it to periodic mode. Furthermore, don't set the SETVAL bit in the config register. This wouldn't have any effect unless the timer was in period mode (which it isn't), and then the actual timer frequency would be half that of the desired one because incrementing the comparator in the interrupt handler would be done after the hardware has already incremented it itself. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] hpet-RTC: disable interrupt when no longer neededClemens Ladisch2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the emulated RTC interrupt is no longer needed, we better disable it; otherwise, we get a spurious interrupt whenever the timer has rolled over and reaches the same comparator value. Having a superfluous interrupt every five minutes doesn't hurt much, but it's bad style anyway. ;-) Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] sparse cleanups: NULL pointers, C99 struct init.Randy Dunlap2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | Convert most of the remaining "Using plain integer as NULL pointer" sparse warnings to use NULL. (Not duplicating patches that are already in -mm, -bird, or -kj.) Convert isdn driver struct initializer to use C99 syntax. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] jiffies_64 cleanupThomas Gleixner2005-10-30
| | | | | | | | | | | | | | | | | | Define jiffies_64 in kernel/timer.c rather than having 24 duplicated defines in each architecture. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] unify sys_ptrace prototypeChristoph Hellwig2005-10-30
| | | | | | | | | | | | | | | | | | | | Make sure we always return, as all syscalls should. Also move the common prototype to <linux/syscalls.h> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] i386: use -mcpu, not -mtune, for GCCs older than 3.4Paolo 'Blaisorblade' Giarrusso2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I just noted that -mtune is used, which is only supported on recent GCCs; by reading http://gcc.gnu.org/gcc-3.4/changes.html, you see "-mcpu has been renamed to -mtune.", so for GCC < 3.4 we're not using any specific tuning in the appropriate cases. However -mcpu is deprecated, so use -mtune when possible. This was introduced by commit e9d4dce954a60dc23dd1d967766ca2347b780e54 of the old tree (between 2.6.10-rc3 and 2.6.10) by Linus Torvalds, to remove the use of -march, since that could trigger gcc using SSE on its own. But no attention was used about using -mcpu vs. -mtune. And btw, the old 2.6.4 code (for instance) was: cflags-$(CONFIG_MPENTIUMII) += $(call check_gcc,-march=pentium2,-march=i686) cflags-$(CONFIG_MPENTIUMIII) += $(call check_gcc,-march=pentium3,-march=i686) cflags-$(CONFIG_MPENTIUMM) += $(call check_gcc,-march=pentium3,-march=i686) cflags-$(CONFIG_MPENTIUM4) += $(call check_gcc,-march=pentium4,-march=i686) Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] uml: reuse i386 cpu-specific tuningPaolo 'Blaisorblade' Giarrusso2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] create and destroy cache sysfs entries based on cpu notifiersAshok Raj2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cpu cache entries should be populated only when cpu is online and removed when they are logically offlined. Without which entries are not removed when cpu is offlined, or dont appear when we boot with maxcpus=1 and then kick the rest of the cpus via echo 1 to the sysfs online file. - Changed __devinit to __cpuinit for consistency. - Changed sysfs_driver_register to register_cpu_notifier. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Zwane Mwaikambo <zwane@holomorphy.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] i386: srat on non-acpi hw fixMagnus Damm2005-10-30
| | | | | | | | | | | | | | | | | | | | This patch adds a check for the return value of acpi_find_root_pointer(). Without this patch systems without ACPI support such as QEMU crashes when booting a NUMA kernel with CONFIG_ACPI_SRAT=y. Signed-off-by: Magnus Damm <magnus@valinux.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] i386 mpparse: Only ignore lapic information we can't storeEric W. Biederman2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After staring at mpparse.c for a little longer I noticed that when we hit our limit of num_processors we are filtering out information about other processors that we can still store. This patch just reorders the code so we store everything we can. This should avoid the incorrect warning about our boot CPU not being listed by the BIOS that we are now getting in the kexec on panic case, and it should allow us to detect all apicid conflicts even when our physical number of cpus exceeds maxcpus. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] kdump/i386: apic verification failure fixVivek Goyal2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | o Removes the unnecessary call to local_irq_disable(). o Kdump was failing while second kernel was coming up. Check for presence of boot cpu apic id was failing in (apic_id_registered), hence hitting BUG(). o This should not have failed because before calling setup_local_APIC(), it is ensured that even if BIOS has not reported boot cpu, then hard set the prence of it. Problem happens because of usage of hard_smp_processor_id() which is hardcoded to zero in case of non SMP kernel. In kdump case second kernel can boot on a cpu whose boot cpu id is not zero. o Using boot_cpu_physical_apicid instead to hard set the presence of boot cpu. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Clean up mtrr compat ioctl codeBrian Gerst2005-10-30
| | | | | | | | | | | | | | | | | | | | Handle 32-bit mtrr ioctls in the mtrr driver instead of the ia32 compatability layer. Signed-off-by: Brian Gerst <bgerst@didntduck.org> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] x86: vmx cpu feature detectionKamble, Nitin A2005-10-30
| | | | | | | | | | | | | | | | | | If VMX feature is available in the CPU, this patch will make it visible in the /proc/cpuinfo with the cpuid detection. Signed-Off-By: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] i386 kexec-on-panic: Don't shutdown the apics.Eric W. Biederman2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | It is dangerous to shutdown the apics in machine_crash_shutdown. With my previous patch to initialize apics in init_IRQ we should be able to boot a kernel without this. As long as we reinitialize the APICs we don't care what state they were in during bootup. This should make machine_crash_shutdown noticeably more reliable. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] i386: move apic init in init_IRQsEric W. Biederman2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All kinds of ugliness exists because we don't initialize the apics during init_IRQs. - We calibrate jiffies in non apic mode even when we are using apics. - We have to have special code to initialize the apics when non-smp. - The legacy i8259 must exist and be setup correctly, even when we won't use it past initialization. - The kexec on panic code must restore the state of the io_apics. - init/main.c needs a special case for !smp smp_init on x86 In addition to pure code movement I needed a couple of non-obvious changes: - Move setup_boot_APIC_clock into APIC_late_time_init for simplicity. - Use cpu_khz to generate a better approximation of loops_per_jiffies so I can verify the timer interrupt is working. - Call setup_apic_nmi_watchdog again after cpu_khz is initialized on the boot cpu. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] i386 nmi_watchdog: Merge check_nmi_watchdog fixes from x86_64Eric W. Biederman2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The per cpu nmi watchdog timer is based on an event counter. idle cpus don't generate events so the NMI watchdog doesn't fire and the test to see if the watchdog is working fails. - Add nmi_cpu_busy so idle cpus don't mess up the test. - kmalloc prev_nmi_count to keep kernel stack usage bounded. - Improve the error message on failure so there is enough information to debug problems. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] i386 io_apic.c: Memorize at bootup where the i8259 is connectedEric W. Biederman2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we attempt to restore virtual wire mode on reboot, which only works if we can figure out where the i8259 is connected. This is very useful when we kexec another kernel and likely helpful when dealing with a BIOS that make assumptions about how the system is setup. Since the acpi MADT table does not provide the location where the i8259 is connected we have to look at the hardware to figure it out. Most systems have the i8259 connected the local apic of the cpu so won't be affected but people running Opteron and some serverworks chipsets should be able to use kexec now. In addition this patch removes the hard coded assumption that the io_apic that delivers isa interrups is always known to the kernel as io_apic 0. As there does not appear to be anything to guarantee that assumption is true. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] ES7000 platform updateNatalie.Protasevich@unisys.com2005-10-30
| | | | | | | | | | | | | | | | | | | | | | This is platform code update for ES7000: disables IRQ overrides for the recent ES7000 (Rascal/Zorro), cleans up the compile warning. The patch only affects the ES7000 subarch. Signed-off-by: <Natalie.Protasevich@unisys.com> Acked-by: Zwane Mwaikambo <zwane@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] x86: when L3 is present show its size in /proc/cpuinfoVenkatesh Pallipadi2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | The code that prints the cache size assumes that L3 always lives in chipset and is shared across CPUs. Which is not really true. I think all the cachesizes reported by cpuid are in the processor itself. The attached patch changes the code to reflect that. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] fixup bogus e820 entry with mem=Dave Hansen2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This was reported because someone was getting oopses reading /proc/iomem. It was tracked down to a zero-sized 'struct resource' entry which was located right at 4GB. You need two conditions to hit this bug: a BIOS E820_RAM area starting at exactly the boundary where you specify mem= (to get a zero-sized entry), and for the legacy_init_iomem_resources() loop to skip that resource (which only happens at exactly 4G). I think the killing zero-sized e820 entry is the easiest way to fix this. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] asus vt8235 router buggy bios workaroundaleksey_gorelov@phoenix.com2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hopefully fix http://bugzilla.kernel.org/show_bug.cgi?id=5235 Similar problem has been reported before here: http://groups.google.com/group/linux.kernel/browse_thread/thread/def4ca19dbc3cd4/5cffbf349f2c87a4?tvc=2&q=Aleksey+Gorelov&hl=en#5cffbf349f2c87a4 and was related to bug in BIOS reporting 82C686 router compatible to 586. I suspect BIOS on this board has similar issue: reports VT8235 router to be compatible with 586 one - which is obviously not true. Patch from the link above has already incorporated in both 2.6 & 2.4 series, but might not work in this particular case. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] x86: bug fix in P6 Machine check initializationVenkatesh Pallipadi2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | Make P6 MCA initialization code complaint with guidelines in IA-32 SDM Vol3. Bank 0 control register should not be set by OS and clear status registers on all banks on reset. This will prevent false MCE alarms on the systems that has some non-MCE information left-over in MC0_STATUS on reboot. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] x86: add an accessor function for getting the per-CPU gdtZachary Amsden2005-10-30
| | | | | | | | | | | | | | | | | | | | Add an accessor function for getting the per-CPU gdt. Callee must already have the CPU. Signed-off-by: Zachary Amsden <zach@vmware.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] x86: bogus tls from gdtZachary Amsden2005-10-30
| | | | | | | | | | | | | | | | | | | | | | | | The per-CPU initialization code is copying in bogus data into thread->tls_array. Note that it copies &per_cpu(cpu_gdt_table, cpu), not &per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_TLS_MIN). That is totally broken and unnecessary. Make the initialization explicitly NULL. Signed-off-by: Zachary Amsden <zach@vmware.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>