aboutsummaryrefslogtreecommitdiffstats
path: root/arch/avr32/boards
Commit message (Collapse)AuthorAge
* dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang2009-04-07
| | | | | | | | Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* avr32: add RTS/CTS/CLK pin selection for the USARTsPeter Ma2009-04-01
| | | | | | | | | | | Adds extra parameter to AT32 at32_map_usart(), so as to reserve RTS/CTS/CLK pins. All boards under arch/avr32/boards have been updated (trivial change), but not all have been tested. Signed-off-by: Peter Ma <pma@mediamatech.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* Add RTC support for Merisc boardsJonas Larsson2009-03-30
| | | | | | | This patch adds RTC support for the Merisc boards. Signed-off-by: Jonas Larsson <jonas.larsson@martinsson.se> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* avr32: at32ap700x: setup DMA for AC97C in the machine codeHans-Christian Egtvedt2009-03-27
| | | | | | | | | | | | | | | | | | | | This patch will adjust the setup the DMA controller for the AC97 Controller in the at32ap700x machine code. This setup matches the new ALSA driver for the AC97C. The struct ac97c_platform_data has been moved into its own header file located in the sound include path. Tested on ATSTK1006 + ATSTK1000. This patch will setup the AC97 controller properly for the adjusted machine code. Both EVKLCD10x and Hammerhead board has been updated. Tested on EVKLCD10x, and copied to Hammerhead board. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> [haavard.skinnemoen@atmel.com: fold with board code update] Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* avr32: at32ap700x: setup DMA for ABDAC in the machine codeHans-Christian Egtvedt2009-03-27
| | | | | | | | | | | | | | | This patch will adjust the setup the DMA controller for the Audio Bistream DAC in the at32ap700x machine code. This setup matches the new ALSA driver for the ABDAC. Tested on ATSTK1006 + ATSTK1000. This patch will setup the needed platform data for the Audio Bistream DAC used by the Favr-32 board. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> [haavard.skinnemoen@atmel.com: fold board code update] Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* Add Merisc board supportJonas Larsson2009-03-27
| | | | | | | | | | | | | | Merisc is the family name for a range of AVR32-based boards. The boards are designed to be used in a man-machine interfacing environment, utilizing a touch-based graphical user interface. They host a vast range of I/O peripherals as well as a large SDRAM & Flash memory bank. For more information see: http://www.martinsson.se/merisc Signed-off-by: Jonas Larsson <jonas.larsson@martinsson.se> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* avr32: fix timing LCD parameters for EVKLCD10X boardsHans-Christian Egtvedt2009-03-26
| | | | | | | | This patch adjusts the timing parameters for the Kyocera LCD panels connected on the EVKLCD10X addon boards. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* avr32: use GPIO line PB15 on EVKLCD10x boards for backlightHans-Christian Egtvedt2009-03-26
| | | | | | | | | | | The PB15 GPIO line is used to control the enable and disable signal for the backlight regulator on EVKLCD10x boards. This patch hands the I/O line over to the LCDC driver, which will control when to enable and disable the backlight. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> [haavard.skinnemoen@atmel.com: reverted ac97c change] Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* avr32: configure MCI detect and write protect pins for EVKLCD10x boardsHans-Christian Egtvedt2009-03-26
| | | | | | | | | | This patch removes the special handling of MCI platform data for EVKLCD10x boards. This is now possible since the pin mask for the LCD controller is no longer reserving the I/O lines used for MCI card detection and write protect. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* avr32: set pin mask to alternative 18 bpp for EVKLCD10x boardsHans-Christian Egtvedt2009-03-26
| | | | | | | | This patch will set the pin mask to alternative 18 bits per pixel output for EVKLCD10x boards. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* avr32: remove duplicated #includeHuang Weiyi2009-03-24
| | | | | | | | Remove duplicated #include in arch/avr32/boards/hammerhead/flash.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Acked-by: Alex Raimondi <mailinglist@miromico.ch> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* avr32: data param to at32_add_device_mci() must be non-NULLHaavard Skinnemoen2009-01-05
| | | | | | | | | | at32_add_device_mci() will refuse to add the mci device if the data parameter is NULL. Fix up the favr-32 and hammerhead boards so that this doesn't happen. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Alex Raimondi <mailinglist@miromico.ch> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
* Merge branch 'move-atmel-mci-h' into boardsHaavard Skinnemoen2009-01-05
|\
| * atmel-mci: move atmel-mci.h file to include/linuxNicolas Ferre2009-01-05
| | | | | | | | | | | | | | | | Needed to use the atmel-mci driver in an architecture independant maner. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* | avr32: Hammerhead board supportAlex Raimondi2009-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Hammerhead platform is built around a AVR32 32-bit microcontroller from Atmel. It offers versatile peripherals, such as ethernet, usb device, usb host etc. The board also incooperates a power supply and is a Power over Ethernet (PoE) Powered Device (PD). Additonally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two DDR2 SDRAM interfaces, which will cover even the most exceptional need of memory bandwidth. Together with the onboard video decoder the board is ready for video processing. This patch does include the basic support for the fpga device driver, but not the device driver itself. Signed-off-by: Alex Raimondi <mailinglist@miromico.ch> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* | Merge branch 'cleanups' into boardsHaavard Skinnemoen2009-01-05
|\ \ | |/ |/|
| * avr32: Allow reserving multiple pins at onceAlex Raimondi2009-01-05
| | | | | | | | | | | | | | | | | | | | | | at32_reserve_pin now takes an u32 bitmask rather than a single pin. This allows to reserve multiple pins at once. Remove (undocumented) SDCS (pin PE26) from reservation in board setup code. Signed-off-by: Alex Raimondi <raimondi@miromico.ch> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
| * favr-32: Remove deprecated callHaavard Skinnemoen2009-01-05
| | | | | | | | | | | | at32_add_system_devices() is deprecated, so remove the call to it. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
| * MIMC200: Remove deprecated callMark Jackson2009-01-05
| | | | | | | | | | | | | | | | This patch removes a call to the deprecated function at32_add_system_devices(). Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* | avr32: favr-32 build fixHaavard Skinnemoen2008-12-18
|/ | | | | | | The favr-32 board code still refers to the old asm/arch header files which were moved to mach/ some time ago. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* Merge branches 'boards' and 'fixes' of ↵Haavard Skinnemoen2008-10-23
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6
| * avr32: Fix GPIO initcall breakageHaavard Skinnemoen2008-10-23
| | | | | | | | | | | | | | | | | | | | Add essential system devices, including GPIO controllers, automatically at core_initcall time. This ensures that the devices are there when the PIO driver gets initialized at postcore_initcall, fixing a bug exposed by commit d6634db8fe1784d0a8e4e156970fec034708446e "avr32: Use platform_driver_probe for pio platform driver". Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* | avr32: Add MIMC200 board supportMark Jackson2008-10-13
| | | | | | | | | | | | | | | | | | | | | | Please consider the following patch which adds support for a new AVR32 based board. The board is closely based on Atmel's NGW100 reference board, but has an extra 8MByte FLASH and 128KByte FRAM. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* | avr32: add support for EarthLCD Favr-32 boardHans-Christian Egtvedt2008-10-13
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Favr-32 board made by EarthLCD. This kit, which is also called ezLCD-101, has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash, Ethernet, audio out, USB device, SD-card slot, USART and various other connectors for cennecting stuff to SPI, I2C, GPIO, etc. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* | avr32: Add support for EVKLCD10X addon boardsHans-Christian Egtvedt2008-10-13
|/ | | | | | | | | | | | | | | | | | | | | | | This patch lets the user enable support for EVKLCD100 and EVKLCD101 (refered to by EVKLCD10X). By enabling EVKLCD10X support the LCD controller and AC97 controller platform devices are added. The user can also choose between the EVKLCD100 (QVGA display) and the EVKLCD101 (VGA display), this is added to automagically select the correct panel timing and resolution parameters. Enabling support for EVKLCD10X addon board will cripple the MCI platform device a bit since they share two GPIO lines (detect and write-protect). These two lines are disabled when EVKLCD10X is enabled. The default configurations are based upon ATNGW100, but with added AC97C and LCDC driver. Virtual terminal is also enabled by default for EVKLCD10X boards. Verified on hardware with a NGW100 + EVKLCD100/101. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* avr32: Fix build failures in board codeHaavard Skinnemoen2008-10-12
| | | | | | | Fix a few instances of board code breakage introduced by the atmel-mci platform interface changes. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* avr32: Allow selecting multiple pins at onceJulien May2008-10-12
| | | | | | | | at32_select_periph() now takes an u32 bitmask rather than a single pin. This allows to set multiple pins at once. Signed-off-by: Alex Raimondi <mailinglist@miromico.ch> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* Merge branch 'master' of ↵Haavard Skinnemoen2008-10-12
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/atmel-mci-2.6.28
| * atmel-mci: Platform code for supporting multiple mmc slotsHaavard Skinnemoen2008-10-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the necessary platform infrastructure to support multiple mmc/sdcard slots all at once through a single controller. Currently, the driver will use the first valid slot it finds and stick with that, but later patches will add support for switching between several slots on the fly. Extend the platform data structure with per-slot information: MMC/SDcard bus width and card detect/write protect pins. This will affect the pin muxing as well as the capabilities announced to the mmc core. Note that board code is now required to supply a mci_platform_data struct to at32_add_device_mci(). Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* | ngw100: export J15 through sysfsDavid Brownell2008-09-22
| | | | | | | | | | | | | | | | | | | | | | | | The NGW100 board has jumper J15 (near the reset button) which is unused. This patch exports it through the GPIO sysfs support (as /sys/class/gpio/gpio62/value) so that it's easily queried by boot scripts or whatever might want to know if the jumper has been installed (value = 0) or not (value = 1, "default"). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> [haavard.skinnemoen@atmel.com: add missing include] Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* | avr32: Allow fine-grained control over LCDC pinsJulien May2008-09-22
|/ | | | | | | | | | This replaces the pin_config param with an u64 pin_mask in at32_add_device_lcdc, allowing a board-maintainer to indivually select specific lcdc pins. Signed-off-by: Alex Raimondi <raimondi@miromico.ch> Signed-off-by: Julien May <jmay@miromico.ch> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* atstk1000: fix build breakage with BOARD_ATSTK100X_SW2_CUSTOM=yHaavard Skinnemoen2008-09-19
| | | | | | | The #ifdef surrounding the code adding the mmc controller had a typo, causing it to be compiled even when mmc was supposed to be disabled. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* avr32: Make atstk1006_nand_data definition staticHaavard Skinnemoen2008-08-08
| | | | Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* avr32: Reduce DataFlash bus speed to 8 MHz on ATNGW100Haavard Skinnemoen2008-08-08
| | | | | | | | Doing this in combination with "atmel_spi: fix hang due to missed interrupt" appears to eliminate the overruns I'm seeing when using JFFS2-on-DataFlash as /usr filesystem on the ATNGW100. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* avr32: Use <mach/foo.h> instead of <asm/arch/foo.h>Haavard Skinnemoen2008-08-05
| | | | | | | Update all avr32-specific files to use the new platform-specific header locations. Drivers shared with ARM are left alone for now. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* avr32: some mmc/sd cleanupsDavid Brownell2008-07-27
| | | | | | | | | | | | | | | | | | | | Minor cleanups for the MMC/SD support on avr32: - Make at32_add_device_mci() properly initialize "missing" platform data ... so boards like STK1002 won't try GPIO 0. - Switch over to gpio_is_valid() instead of testing for only one designated value. - Provide STK1002 platform data for the unlikely case that switches are set so first Ethernet controller isn't in use. (That's the only way to get card detect and writeprotect switch sensing on the STK1000.) And get rid of one "unused variable" warning. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* Merge commit 'upstream/master'Haavard Skinnemoen2008-07-27
|\
| * Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6David Woodhouse2008-07-25
| |\
| * | avr32: Add support for ATSTK1006Håvard Skinnemoen2008-06-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ATSTK1006 is basically an upgraded version of ATSTK1002 with 128 MiB SDRAM and 256 MiB NAND flash on board. Otherwise, the board is very similar to the ATSTK1002, so it uses the same board support file. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | | fix avr32 build errorsAdrian Bunk2008-07-17
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 7d2be0749a59096a334c94dc48f43294193cb8ed (atmel-mci: Driver for Atmel on-chip MMC controllers) causes build errors like: <-- snip --> ... CC arch/avr32/boards/atstk1000/atstk1003.o /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/avr32/boards/atstk1000/atstk1003.c: In function 'atstk1003_init': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/avr32/boards/atstk1000/atstk1003.c:157: error: too few arguments to function 'at32_add_device_mci' make[2]: *** [arch/avr32/boards/atstk1000/atstk1003.o] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* | atmel-mci: Driver for Atmel on-chip MMC controllersHaavard Skinnemoen2008-07-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a driver for the MMC controller on the AP7000 chips from Atmel. It should in theory work on AT91 systems too with some tweaking, but since the DMA interface is quite different, it's not entirely clear if it's worth merging this with the at91_mci driver. This driver has been around for a while in BSPs and kernel sources provided by Atmel, but this particular version uses the generic DMA Engine framework (with the slave extensions) instead of an avr32-only DMA controller framework. This driver can also use PIO transfers when no DMA channels are available, and for transfers where using DMA may be difficult or impractical for some reason (e.g. the DMA setup overhead is usually not worth it for very short transfers, and badly aligned buffers or lengths are difficult to handle.) Currently, the driver only support PIO transfers. DMA support has been split out to a separate patch to hopefully make it easier to review. The driver has been tested using mmc-block and ext3fs on several SD, SDHC and MMC+ cards. Reads and writes work fine, with read transfer rates up to 3.5 MiB/s on fast cards with debugging disabled. The driver has also been tested using the mmc_test module on the same cards. All tests except 7, 9, 15 and 17 succeed. The first two are unsupported by all the cards I have, so I don't know if the driver handles this correctly. The last two fail because the hardware flags a Data CRC Error instead of a Data Timeout error. I'm not sure how to deal with that. Documentation for this controller can be found in many data sheets from Atmel, including the AT32AP7000 data sheet which can be found here: http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* | avr32: improve NGW100 I2C/PMBus setupDavid Brownell2008-06-27
| | | | | | | | | | | | | | | | | | | | | | | | Basic I2C initialization for the NGW100 board: - Provide empty i2c device table. Daughtercards may add devices, and the ATtiny24 could do stuff too. - Set up EXTINT(3) so the ATtiny24 can interrupt the AP7000. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* | avr32: Add pin configuration choice to LCDC peripheralHans-Christian Egtvedt2008-06-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch lets the board code choose which pin out to use for the LCD interface. On AT32AP7000 the LCDC is wired to two sets of pins, which lets the user choose between dual ethernet and 32-bit EBI. For the ATNGW100 board it is vital to have the choice to select the alternative pinout since this pinout is routed to the external headers. Update ATSTK1002 and ATSTK1004 to use the new interface. Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* | avr32: Allow board to define oscillator ratesAlex2008-06-27
|/ | | | | | | | | | | | On our custom board we have other oscillator rates than on atngw100 and atstk100x. Currently these rates are hardcoded in arch/avr32/mach-at32ap/at32ap700x.c. This patch moves them into board specific code. Signed-off-by: Alex Raimondi <raimondi@miromico.ch> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* avr32: Use correct config symbol in atstk1004 board codeHaavard Skinnemoen2008-02-13
| | | | | | | | | CONFIG_BOARD_ATSTK1002_SW2_CUSTOM should be CONFIG_BOARD_ATSTK100X_SW2_CUSTOM. Spotted by Robert P. J. Day. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
* [AVR32] Kconfig: Choose daughterboard instead of CPUHaavard Skinnemoen2008-01-25
| | | | | | | | Remove the CPU selection menu and instead let it be selected by the board or daughterboard option. Add daughterboard selection for ATSTK1000 (this was previously determined based on CPU type.) Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
* [AVR32] Add support for ATSTK1003 and ATSTK1004Haavard Skinnemoen2008-01-25
| | | | | | | ATSTK1003 and ATSTK1004 are CPU daughterboards for ATSTK1000 featuring the AT32AP7001 and AT32AP7002 CPUs, respectively. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
* [AVR32] Clean up external DAC setup codeHaavard Skinnemoen2008-01-25
| | | | | | | | Reduce the ridiculous amount of #ifdef clutter in atstk1002.c a bit by moving all the extdac stuff into its own function and providing an empty stub for the case when it isn't wanted. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
* [AVR32] ATSTK1000: Move gpio-leds setup to setup.cHaavard Skinnemoen2008-01-25
| | | | | | | There may be other boards than STK1002 that want to use the leds on STK1000. Move it to stk1000 common code to make it easier to reuse. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
* [AVR32] Add support for AT32AP7001 and AT32AP7002Haavard Skinnemoen2008-01-25
| | | | | | | | | These are derivatives of the AT32AP7000 chip, which means that most of the code stays the same. Rename a few files, functions, definitions and config symbols to reflect that they apply to all AP700x chips, and exclude some platform devices from chips where they aren't present. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-23 15:19:09 -0500