aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm
Commit message (Collapse)AuthorAge
* ARM: dts: i.MX27 boards: Switch to use standard GPIO and IRQ flags definitionsAlexander Shiyan2014-02-09
| | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycore-som: Update FEC nodeAlexander Shiyan2014-02-09
| | | | | | | | | | This patch updates FEC devicetree node of Phytec PCM038 module: - Adding missing phy_mode properties. - Adding fixed regulator to provide functionality without dummy-regulator in the kernel. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycore-rdk: Add DT node for camera moduleAlexander Shiyan2014-02-09
| | | | | | | | This patch adds first I2C bus and PCA9536 device. This device is used on Phytec PCM-970 RDK camera addon module. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycore-som: Add on-flash BBT supportAlexander Shiyan2014-02-09
| | | | | | | | This patch adds support for On Flash Bad Block Table for PCM-038 onboard NAND. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27: imx27-apf27dev: add pinctrl for cspi, i2c, sdhc and framebufferGwenhael Goavec-Merou2014-02-09
| | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27: imx27-apf27: add pinctrl for fec and uart1Gwenhael Goavec-Merou2014-02-09
| | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx51-babbage: Define FEC reset pinAlexander Shiyan2014-02-09
| | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1Alexander Shiyan2014-02-09
| | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx28-evk: Run I2C0 at 400kHzFabio Estevam2014-02-09
| | | | | | | It is safe to operate I2C0 at 400kHz as SGTL5000 supports this frequency. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-apf27dev: fix display sizeGwenhael Goavec-Merou2014-02-09
| | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27 phycore pinctrlMarkus Pargmann2014-02-09
| | | | | | | Add pinctrl nodes and properties for phycore device nodes. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27 phycore move uart1 to rdkMarkus Pargmann2014-02-09
| | | | | | | uart1 is not used on SOM. It is passed directly to the rdk board. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27 phyCARD-S pinctrlMarkus Pargmann2014-02-09
| | | | | | | Add pinctrl nodes and properties for phyCARD-S device nodes. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27 iomux device nodeMarkus Pargmann2014-02-09
| | | | | | | | | This patch adds a iomux node for imx27 pinctrl driver. The gpio registers are embedded in the iomux memory area. So this patch moves them into the iomux node for a better hardware description. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx53: Enable AHCI SATA for M53EVKMarek Vasut2014-02-09
| | | | | | | | Signed-off-by: Marek Vasut <marex@denx.de> Cc: Richard Zhu <r65037@freescale.com> Cc: Tejun Heo <tj@kernel.org> Cc: Linux-IDE <linux-ide@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx53: Add AHCI SATA DT nodeMarek Vasut2014-02-09
| | | | | | | | | | The AHCI-IMX driver now supports i.MX53 as well. Add DT node. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Richard Zhu <r65037@freescale.com> Cc: Tejun Heo <tj@kernel.org> Cc: Linux-IDE <linux-ide@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitionsAlexander Shiyan2014-02-09
| | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX51: Move usbphy0 node from AIPS1Alexander Shiyan2014-02-09
| | | | | | | | usbphy0 is not a part of AIPS1, so move this node under root. Additionally this patch removes useless "status" property. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: cfa10036: Add dr_mode and phy_type properties to the DTMaxime Ripard2014-02-09
| | | | | | | | This USB port is only used as peripheral. Set it accordingly in its DT node. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: mxs: cfa10049: Add NAU7802 ADCs to the device treeMaxime Ripard2014-02-09
| | | | | | | | | | The Crystalfontz CFA-10049 has 3 Nuvoton NAU7802 ADCs, plugged behing a GPIO-controlled I2C muxer because these ADCs don't have a configurable address. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx53: Add USB support for M53EVKMarek Vasut2014-02-09
| | | | | | | | | Add USB support for M53EVK. The configuration is such that USB Host1 port is used as Host and the USB OTG port is used as Peripheral thus far. Once OTG is properly fixed, the OTG will be further adjusted. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx53: Fix backlight for M53EVKMarek Vasut2014-02-09
| | | | | | | | | Remove the PWM backlight pin from the hog pins list, so it doesn't collide with the PWM pin group. Moreover, add dummy regulator for the backlight so that the backlight driver probes correctly. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx53: Fix display pinmux for M53EVKMarek Vasut2014-02-09
| | | | | | | Use the DISP1 pinmux on M53EVK for the LCD, not the LVDS. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx50: use clock defines in DTS filesLucas Stach2014-02-09
| | | | | | | | For better readability and no need to look up numbers in the documentation anymore. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx51: use clock defines in DTS filesLucas Stach2014-02-09
| | | | | | | | For better readability and no need to look up numbers in the documentation anymore. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx53: use clock defines in DTS filesLucas Stach2014-02-09
| | | | | | | | For better readability and no need to look up numbers in the documentation anymore. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27 pin functionsMarkus Pargmann2014-02-09
| | | | | | Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx27-apf27dev: Add sdhci supportGwenhael Goavec-Merou2014-02-09
| | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX51: Switch to use standard IRQ flags definitionsAlexander Shiyan2014-02-09
| | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX51: Add dummy clock to AUDMUXAlexander Shiyan2014-02-09
| | | | | | | | This patch adds dummy clock for AUDMUX. This change avoids useless debug message "cannot get clock" during driver initialization. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX51: Update CPU nodeAlexander Shiyan2014-02-09
| | | | | | | | | | | | This patch updates i.MX51 CPU node: - Alias for CPU is added to allow using this node in the parent DTS files. - Removed useless "clock_names" property. - "clock-latency" value increased to safe using with 32 kHz OSC. - Defined operating points voltages and "voltage tolerance" properties. Values are safe for both commercial and industrial CPU variants. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: mxs: add support for I2SE's duckbill seriesMichael Heimpold2014-02-09
| | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx25.dtsi: label the iomuxc.Denis Carikli2014-02-09
| | | | | | | | | | | | | | Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx25: Add pinctrl functions.Denis Carikli2014-02-09
| | | | | | | | | | | | | | | | Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx: use generic node name for fixed regulatorShawn Guo2014-02-09
| | | | | | | | The device tree specification recommends that generic name should be used for nodes. So instead of naming those fixed regulator nodes arbitrarily, let's use the generic name 'regulator@num' for those nodes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx53-mba53: create a container for fixed regulatorsShawn Guo2014-02-09
| | | | | | | | To align with others on fixed regulators bindings, it adds node 'regulators' as the container and move all regulator-fixed nodes into there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: vf610: make pinctrl nodes board specificShawn Guo2014-02-09
| | | | | | | | | | | | | | | | | | | | Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Fugang Duan <B38611@freescale.com>
* ARM: dts: imx51: make pinctrl nodes board specificShawn Guo2014-02-09
| | | | | | | | | | | | | | | | | | | Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx53: make pinctrl nodes board specificShawn Guo2014-02-09
| | | | | | | | | | | | | | | | | | | Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX53: Devicetree for Voipac Baseboard using x53-dmm-668 moduleRostislav Lisovy2014-02-09
| | | | | | | | Supported peripherals: Audio -- headphone output, LEDs, Buttons (using keyboard controller), SD-card. Signed-off-by: Rostislav Lisovy <lisovy@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX53: dts for Voipac x53-dmm-668 moduleRostislav Lisovy2014-02-09
| | | | | | | Enable uart1, ecspi1, i2c1, FEC and PMIC Signed-off-by: Rostislav Lisovy <lisovy@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx: add device tree support for Freescale imx50evk boardGreg Ungerer2014-02-09
| | | | | | | | Add device tree support for the Freescale IMX50EVk board based around the IMX50 SoC. Supports UART, SPI flash, FEC ethernet and USB on this board. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx: add IMX50 SoC device treeGreg Ungerer2014-02-09
| | | | | | | | Create device tree source for the Freescale IMX50 SoC. This was based on the IMX53 source with changes made as necessary. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx: add device tree pin definitions for the IMX50Greg Ungerer2014-02-09
| | | | | | | Add device tree pin function definitions for the Freescale IMX50 SoC. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: Add support for the cpuimx51 board from Eukrea and its baseboard.Denis Carikli2014-02-09
| | | | | | | | | | | | | | | | | | | | | | | | The following devices/functionalities were added: * Main and secondary UARTs. * i2c and the pcf8563 device. * Ethernet. * NAND. * The BP1 button. * The LED. * Watchdog * SD. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx25.dtsi: Add a label for the Audio Multiplexer.Denis Carikli2014-02-09
| | | | | | | | | | | | | | | Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX25: Add sdma script path.Denis Carikli2014-02-09
| | | | | | | | | | | | | | Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX25: Add ssi clocks and DMA events.Denis Carikli2014-02-09
| | | | | | | | | | | | | | Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: mxs: add auart2 pinmux to imx28.dtsiAida Mynzhasova2014-02-09
| | | | | | | Add auart2 pins configuration on its main pads Signed-off-by: Aida Mynzhasova <aida.mynzhasova@skitlab.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX53: Internal keyboard controllerRostislav Lisovy2014-02-07
| | | | | Signed-off-by: Rostislav Lisovy <lisovy@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-07 21:08:26 -0500